semi- remolque

8/16/2019 semi- remolque

1/37

It’s all quick and easy to make withno fancy joints or cuts. Build it usingcommon tools and with easy to ndmaterials and supplies.

FULL-SIZEWOOD TOYPLAN SET

Free Wood Toy Plan

Freightliner Semi

25-1/2” L x 8-3/4” W x

8-7/8” H with trailer

READ BEFOREPRINTING!Please “SAVE” the PDF fle

before you print pages. To

conserve printing ink we

recommend that you print only

the black and white precision

line pattern drawings pages in

the plan set.

For more tips and frequently

asked questions about our PDF

fles visit our website at www.

toymakingplans.com and click the“PDF Questions” button at the top

of our website.

For more toy plans and how to’s Visit Us at www.toymakingplans.com.

1ToymakingPlans.com © 2015


2/37

Free Wood Toy PlanFREIGHTLINER SEMI

2 ToymakingPlans.com © 2015For more toy plans and how to’s Visit Us at www.toymakingplans.com.

This clear-coated wood toy can be built with

danish plywood, hardwoods, softwoods or MDF.

The nish is spray can Krylon or Rust-Oleum

clear gloss. Spray 2 thin coats sanding each

coat with 220 sandpaper when dry. Then spray

3 light nal coats of clear, sanding with 400

sandpaper when dry. Apply nal coat without

sanding. All Krylon and Rust-Oleum paints and

nishes are non-toxic when dry.

2


3/37

3ToymakingPlans.com © 2015For more toy plans and how to’s Visit Us at www.toymakingplans.com.

Warning: Read before copying.

ToymakingPlans.com is dedicated to providing you with the

information and ideas you need to develop your skills as a toymaker.

We welcome your comments and any suggestions about this

collection of toy plans.

Email: [email protected]©2014 ToymakingPlans.com - All rights reserved - 102815

Note to the Readers: Due to different conditions, tools, and

individual skills, ToymakingPlans.com assumes no responsibility

for any damages, injuries suffered, or losses incurred as a result of

following the information published in this plan set. Before beginning

any project review instructions carefully. If any doubts or questions

remain consult local experts or authorities.

Copyright Information: Plans and patterns in this Plan Set

can be photo-copied for personal use when building the toys.

ToymakingPlans.com plans and patterns are copyrighted and cannot

be distributed or shared for free or for any other reason.

The unauthorized reproduction or

distribution of this copyrighted work is

illegal. Criminal copyright infringement

including infringement without monetary

gain, is investigated by the FBI and is

punishable by up to 5 years in federal

prison and a ne of $250,000.

Make as many of each toy as you like! The wood toys in

this plan set are royalty-free. You have the right to build

any quantity of these toys for any reason.

The plans and patterns in this planset can be photo-copied for

your personal use when building the toys. ToymakingPlans.

com plans and patterns are copyrighted and cannot legally

be copied, distributed or shared with anyone for any other

purpose.

Color & Natural Wood Pictorial Views ....................................4-11

Truck Patterns Index, Parts List and How-To’s .....................12-15

Trailer Patterns Index, Parts List and How-To’s....................16-19

Full-Size Precision Line Patterns..........................................20-35

Cartoning and Labels ...........................................................36-37

FULL-SIZE WOOD TO PLAN SET

Free Wood Toy Plan

Freightliner Semi

3


4/37



This color painted wood toy can be built with


The nish is spray can Krylon or Rust-Oleum.

Spray 2 coats of primer sanding each coat with

220 sandpaper when dry. Then spray 3 coats

of color sanding with 400 sandpaper when dry.

Apply nal coat without sanding. All Krylon and

Rust-Oleum paints and nishes are non-toxic

when dry. The stripes are 1/4” wide striping tapethat is available at automobile parts stores.

4


5/37




This color painted wood toy can be built with


The nish is spray can Krylon or Rust-Oleum.

Spray 2 coats of primer sanding each coat with

220 sandpaper when dry. Then spray 3 coats

of color sanding with 400 sandpaper when dry.

Apply nal coat without sanding. All Krylon and

Rust-Oleum paints and nishes are non-toxic

when dry. The stripes are 1/4” wide striping tape

that is available at automobile parts stores.

5


6/37



This clear-coated wood toy can be built with danish plywood,

hardwoods, softwoods or MDF. The nish is spray can Krylon or

Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat

with 220 sandpaper when dry. Then spray 3 light nal coats of

clear, sanding with 400 sandpaper when dry. Apply nal coat

without sanding. All Krylon and Rust-Oleum paints and nishes

are non-toxic when dry.

6


7/377ToymakingPlans.com © 2015



This clear-coated wood toy can be built with danish plywood,

hardwoods, softwoods or MDF. The nish is spray can Krylon or

Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat

with 220 sandpaper when dry. Then spray 3 light nal coats of

clear, sanding with 400 sandpaper when dry. Apply nal coat

without sanding. All Krylon and Rust-Oleum paints and nishes

are non-toxic when dry.

7


8/37

To view page 8-9 as a two-page spread in Adobe Reader:

1. Select View/Page Display/Two Page Scrolling

2. Select View/Page Display/Show Cover Page in Two Page View



This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The nish is spray

can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry.

Then spray 3 light nal coats of clear, sanding with 400 sandpaper when dry. Apply nal coat without sanding.

All Krylon and Rust-Oleum paints and nishes are non-toxic when dry.

8


9/37





1. Select View/Page Display/Two Page Scrolling2. Select View/Page Display/Show Cover Page in Two Page View




This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The nish is spray

can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry.

Then spray 3 light nal coats of clear, sanding with 400 sandpaper when dry. Apply nal coat without sanding.

All Krylon and Rust-Oleum paints and nishes are non-toxic when dry.

9


10/37






0 1 2 3printer scale

ACTUAL SIZE

10


11/37








ACTUAL SIZE

11


12/37


1. 1-1/2” x 3-1/2” x 9” make 1 2. 1/4” diameter x 3-9/16” make 3

3. 1-1/2” diameter x 1/2” buy 6

4. 1/16” x 7/16” x 3/4” make 4 5. 1/16” x 3/4” x 1-3/8” make 2 6. 1/16” x 7/8” x 1-7/8” make 2

7. 1/16” x 1-3/8” x 1-7/8” make 2 8. 1/4” x 3-1/4” x 4-15/16” make 1 9. 1-1/2” x 3-1/8” x 4-13/16” make 2 10. 3/8” diameter x 4-5/16” make 2 11. 1/16” x 1” x 1-1/2” make 1 12. 1/16” x 3/16” x 7/16” make 4 13. 1/4” diameter x 1/2” make 2

Freightliner Truck Parts List

Page 20-21

Page 22

Page 23

Page 24

Page 25

Truck + Trailer

Plan View Overview

Truck

Top Plan View

Truck

Side Plan View

12

7

9

8

2

3

5

4

6

1

12

10

13

11

Part 3 Wheels

www.craftparts.com

Part #TWT150 Buy 6

1-1/2” Dia. x 1/2” thick

Hole size 1/4”


13/37



For more toy plans and how to’s Visit Us at www.toymakingplans.com.13

7

9

8

2

3

5

4

6

1

12

10

13

11

2

2

3

3

3

3

4

4

4

5

6

7

9

10

12

12

12

13

Part 3 Wheels

www.craftparts.com

Part #TWT150 Buy 6

1-1/2” Dia. x 1/2” thick

Hole size 1/4”

FREIGHTLINER TRUCK

12


14/37


14For more toy plans and how to’s Visit Us at www.toymakingplans.com.

ToymakingPlans.com © 2015

Using the Plan Views on pages 22-23 asa guide, glue and clamp Part 9’s to Part8 and to Part 1. Let assembly dry beforeproceeding.

Using the Plan Views on pages 22-23as a guide, glue and clamp Parts 6,7 and 12 to the left side of the Step 1

Assembly. Let assembly dry before

proceeding.

Using the Plan Views on pages 22-23as a guide, glue and clamp Parts 6,7 and 12 to the right side of the Step2 Assembly. Let assembly dry before

proceeding.

Using the Plan Views on pages 22-23 asa guide, glue and clamp Parts 4, 5 and11 to the Step 3 Assembly. Let assemblydry before proceeding.

Step 1: Step 2: Step 3: Step 4:

Step 1 Assembly

Step 3 Assembly

Using the Plan Views on pages 22-23as a guide, glue and clamp Parts 4,10 and 13 to the Step 4 Assembly.Let assembly dry before proceeding.

Step 5:

Step 4 Assembly

Using the Plan Views on pages 22-23as a guide, insert three Part 2 axles intothe Step 5 Assembly. Glue the six Part3 wheels to the three Part 2 axles in aposition that allows the wheels and axles

to rotate freely. Let assembly dry.

Step 6:

Step 5 Assembly

Step 2 Assembly

14

7

9

8

2

3

5

4

6

1

10

13

11

2

3

3

3

4

4

4

5

6

7

9

10

12

12

13

FREIGHTLINER TRUCK


15/37





16/37

16 ToymakingPlans.com © 2015 For more toy plans and how to’s Visit Us at www.toymakingplans.com.

Trailer

Top Plan View

Trailer

Side Plan View

16

Page 26-27

1. 1/2” x 5-1/2” x 14” make 2 2. 1/2” x 2-3/4” x 3-3/8” make 1

3. 3/4” x 2-3/4” x 14” make 1 4. 1/4” x 2-11/16” x 3-9/16” make 1 5. 1/4” x 1/4” x 1” make 1 6. 1/8” diameter x 1” make 3

Freightliner Trailer Parts List

Page 28-29

Page 30-31

Page 32-33

Page 34-35

7. 3/8” diameter x 1/2” make 4 8. 1/4” diameter x 1” make 1 9. 1/4” x 2-3/4” x 12-7/8” make 1 10. 1-1/2” x 2-1/2” x 4” make 1 11. 1-1/2” diameter x 1/2” buy 4

12. 1/4” diameter x 3-9/16” make 2

7

9

8

2

3

5

4

6

1

10

Page 20-21

11 12

Part 11 Wheels

www.craftparts.comPart #TWT150 Buy 4

1-1/2” Dia. x 1/2” thick

Hole size 1/4”

Truck + Trailer

Plan View Overview


17/37

17ToymakingPlans.com © 2015For more toy plans and how to’s Visit Us at www.toymakingplans.com.


17

Part 11 Wheels

www.craftparts.com

Part #TWT150 Buy 4

1-1/2” Dia. x 1/2” thick

Hole size 1/4”

7

9

8

2

3

5

4

6

1

10

1

6

6

7

1211

12

11

FREIGHTLINER TRAILER


18/37

FREIGHTLINER TRAILERFree Wood Toy PlanFREIGHTLINER SEMI

18For more toy plans and how to’s Visit Us at www.toymakingplans.com.

ToymakingPlans.com © 2015

Using the Plan Views on pages 26-29 asa guide, glue and clamp Part 2, 3 and 9to the one Part 1 that has two 1/8” holes.Let assembly dry before proceeding.

Using the Plan Views on pages 26-29 asa guide, glue and clamp the remainingPart 1 that has one 1/8” hole to the Step1 Assembly. Let assembly dry before

proceeding.

Using the Plan Views on pages 26-29 asa guide, glue and clamp Part 8 and Part10 to the Step 2 Assembly. Let assemblydry before proceeding.

Using the Plan Views on pages 26-29as a guide, insert two Part 12 axles intothe Step 3 Assembly. Glue the four Part11 wheels to the two Part 12 axles in a

position that allows the wheels and axlesto rotate freely. Let assembly dry beforeproceeding.

Step 1: Step 2: Step 3: Step 4:

Step 1 Assembly

Step 3 Assembly

Using the Plan Views on pages 26-29 asa guide, glue and clamp Part 5 to Part 4.Let door assembly dry. Glue Part 6 doorstop ush with trailer right side. Installpivoting door by gluing two Part 6’sthrough trailer sides and into Part 4 door.

Do not glue Part 6’s to door to allow freerotation of door on two Part 6’s.

Step 5:

Step 4 Assembly

Step 2 Assembly

door stop

18

7

9

8

2

3

5

4

6

1

10

1

6

6

712

11

11


19/37





20/37



ACTUAL SIZE

20

ATTENTION:

THIS FULL-SIZE

PRECISION PLAN VIEWIS FOR ASSEMBLYREFERENCE.

IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printer onlyprint pages 20 through 35. The pages are all line drawings in black to conserve printerink. Check your printer printed size accuracy by measuring the printer scale on eachpattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

TRUCK + TRAILERPLAN VIEW OVERVIEW

FOR DETAILED TRUCK PLAN VIEW

SEE PAGES 22-23.

FOR DETAILED TRAILER PLAN VIEWS

SEE PAGES 26-29.


21/37





ACTUAL SIZE

21

IMPORTANT NOTETo print out enough paper patterns for theentire plan set from your computer printeronly print pages 20 through 35. The pagesare all line drawings in black to conserveprinter ink. Check your printer printed sizeaccuracy by measuring the printer scale oneach pattern with a ruler. If printed size ofpattern is not 100% adjust printer settings.

ATTENTION:

THIS FULL-SIZE

PRECISION PLAN VIEW

IS FOR ASSEMBLYREFERENCE.

TRUCK + TRAILERPLAN VIEW OVERVIEW


SEE PAGES 22-23.FOR DETAILED TRAILER PLAN VIEWS

SEE PAGES 26-29.


22/37




ACTUAL SIZE

22

ATTENTION:

THIS FULL-SIZE


IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printer onlyprint pages 20 through 35. The pages are all line drawings in black to conserve printer ink.Check your printer printed size accuracy by measuring the printer scale on each patternwith a ruler. If printed size of pattern is not 100% adjust printer settings.

TRUCKTOP PLAN VIEWFOR DETAILED TRAILER PLAN VIEWS

SEE PAGES 26-29.

1

4

4

5

5

8

9

9

10

10

11

4

4

13

13


23/37





ACTUAL SIZE

23

IMPORTANT NOTE

To print out enough paper patterns for the entire plan setfrom your computer printer only print pages 20 through35. The pages are all line drawings in black to conserveprinter ink. Check your printer printed size accuracy bymeasuring the printer scale on each pattern with a ruler. Ifprinted size of pattern is not 100% adjust printer settings.

ATTENTION:

THIS FULL-SIZE


TRUCKSIDE PLAN VIEWFOR DETAILED TRAILER PLAN VIEWS

SEE PAGES 26-29.

1

22 2

3 3 3

4

5

6 7

8

9

10

11

4

12

12

13


24/37

1

1

5/16” dia. x

9/16” deep

3/8” dia. x

7/16” deep

3/8” dia. x

7/16” deep

5/16” dia.

hole thru

2 places

5/16” dia.

hole thru1/4” dia. x

3/8” deep

1-3/4” hole x

1/2” deep1-3/4” hole x

1/2” deep

How to use a Forstner Bit to drill wheel wells: 1. Cut out the Part 1 block. Wait to drill the 5/16” axle holes.

2. Securely clamp the block to your work table with the Side View facing up and parallel to the work surface.

3. Using the center of the axle holes crosshairs as a guide, drill a small pilot hole into the block. 4. Line up and

position a 1-3/4’ Forstner drill bit to the pilot hole. 5. Drill a 3/4” deep hole in 3 places. 6. Using the Forstner bit

pilot hole as a guide drill the three 5/16” axle holes.



24


ACTUAL SIZE IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from yourcomputer printer only print pages 20 through 35. The pages are all linedrawings in black to conserve printer ink. Check your printer printedsize accuracy by measuring the printer scale on each pattern with aruler. If printed size of pattern is not 100% adjust printer settings.

TOP VIEW

PART 1

SIDE VIEWPART 1

FREIGHTLINER TRUCK

1. 1-1/2” x 3-1/2” x 9” make 1

Forstner Bit


25/37

2

3

54

45 degreeangle




2. 1/4” diameter x 3-9/16” make 3

3. 1-1/2” diameter x 1/2” buy 6

4. 1/16” x 7/16” x 3/4”make 4

5. 1/16” x 3/4” x 1-3/8”make 2

6. 1/16” x 7/8” x 1-7/8”make 2

7. 1/16” x 1-3/8” x 1-7/8”make 2

8. 1/4” x 3-1/4” x 4-15/16” make 1

9. 1-1/2” x 3-1/8” x 4-13/16” make 2

25


ACTUAL SIZE

IMPORTANT NOTE

To print out enough paper patterns forthe entire plan set from your computerprinter only print pages 20 through 35.The pages are all line drawings in black toconserve printer ink. Check your printerprinted size accuracy by measuring theprinter scale on each pattern with a ruler.If printed size of pattern is not 100% adjustprinter settings.

7

9

8

6

12

10

13

11

9

FREIGHTLINER TRUCK

Part 3 Wheels

www.craftparts.com

Part #TWT150 Buy 6

1-1/2” Dia. x 1/2” thick

Hole size 1/4”

10. 3/8” diameter x 4-5/16” make 2

11. 1/16” x 1” x 1-1/2” make 1

12. 1/16” x 3/16” x 7/16” make 4

13. 1/4” diameter x 1/2” make 2


26/37

TRAILERTOP PLAN VIEWFOR DETAILED TRUCK PLAN VIEW

SEE PAGES 22-23.

1

1

12 12

4

5

7

7




ACTUAL SIZE

26

ATTENTION:

THIS FULL-SIZE


IMPORTANT NOTE

To print out enough paper patterns for theentire plan set from your computer printer onlyprint pages 20 through 35. The pages are allline drawings in black to conserve printer ink.Check your printer printed size accuracy by measuring the printer scale on each pattern

with a ruler. If printed size of pattern is not100% adjust printer settings.

1111

1111

6

6

9 10

F W d T Pl


27/37

TRAILERTOP PLAN VIEWFOR DETAILED TRUCK PLAN VIEW

SEE PAGES 22-23.

2

3

8





ACTUAL SIZE

27

IMPORTANT NOTE

To print out enough paper patterns for theentire plan set from your computer printer onlyprint pages 20 through 35. The pages are allline drawings in black to conserve printer ink.Check your printer printed size accuracy bymeasuring the printer scale on each pattern with

a ruler. If printed size of pattern is not 100%adjust printer settings.

9

F W d T Pl


28/37

3

12 12

45

7

7



door stop


ACTUAL SIZE

28

IMPORTANT NOTE


ATTENTION:

THIS FULL-SIZE


TRAILERSIDE PLAN VIEW


SEE PAGES 22-23.

1111

6

6

9

10

Free Wood To Plan


29/37

1

2

8





ACTUAL SIZE

29

IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from yourcomputer printer only print pages 20 through 35. The pages are all linedrawings in black to conserve printer ink. Check your printer printedsize accuracy by measuring the printer scale on each pattern with a

ruler. If printed size of pattern is not 100% adjust printer settings.

ATTENTION:

THIS FULL-SIZE


TRAILERSIDE PLAN VIEW


SEE PAGES 22-23.

FREIGHTLINER TRAILERFree Wood Toy Plan


30/37




ACTUAL SIZE

30

IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printeronly print pages 20 through 35. The pages are all line drawings in black to conserveprinter ink. Check your printer printed size accuracy by measuring the printer scaleon each pattern with a ruler. If printed size of pattern is not 100% adjust printer settings.

11

1. 1/2” x 5-1/2” x 14” make 2

3/8” dia. x

3/8” deep

(2 places)

1/8” dia.

hole thru:

Drill after

taillights

are glued in

place.

1/8” dia.hole thru:

Right side only

FREIGHTLINER TRAILER Free Wood Toy Plan


31/37






ACTUAL SIZE

31

IMPORTANT NOTE


2

1

2

11

12

11. 1-1/2” diameter x 1/2” buy 4

12. 1/4” diameter x 3-9/16” make 2

2. 1/2” x 2-3/4” x 3-3/8” make 1

Part 11 Wheels

www.craftparts.com

Part #TWT150 Buy 4

1-1/2” Dia. x 1/2” thick

Hole size 1/4”



32/37




ACTUAL SIZE

32

IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printer only printpages 20 through 35. The pages are all line drawings in black to conserve printer ink. Checkyour printer printed size accuracy by measuring the printer scale on each pattern with a ruler.

If printed size of pattern is not 100% adjust printer settings.

3

3

3. 3/4” x 2-3/4” x 14” make 1



33/37






ACTUAL SIZE

33

IMPORTANT NOTE


3

3

7

85

4

6

3. 3/4” x 2-3/4” x 14” make 1

4. 1/4” x 2-11/16” x 3-9/16” make 1

5. 1/4” x 1/4” x 1” make 1

6. 1/8” diameter x 1” make 3

7. 3/8” diameter x 1/2” make 4

8. 1/4” diameter x 1” make 1



34/37




ACTUAL SIZE

34

IMPORTANT NOTE

To print out enough paper patterns for the entire plan set from your computer printer only print pages 20through 35. The pages are all line drawings in black to conserve printer ink. Check your printer printed sizeaccuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 100%adjust printer settings.

9

9

9. 1/4” x 2-3/4” x 12-7/8” make 1



35/37


5/16” dia.

hole thru

2 places





ACTUAL SIZE

35

IMPORTANT NOTE


10

9

9

10

10. 1-1/2” x 2-1/2” x 4” make 1

Free Wood Toy Plan


36/37



Add a pro-touch to your work with a labeled gift box. The

entire Freightliner Truck and Trailer t beautifully in this

off-the-shelf corrugate carton that you can order online in

quantities of 25 cartons.

The cartons are delivered to your door in 3 to 5

days. Ask for item number S-4363. The carton

size is 16” x 12” x 4”. Shipping is extra. Order

at www.uline.com.

36

Free Wood Toy PlanBOX LABEL


37/37

HandmadeWood Toy

Classic Freightliner Semi Truck

yFREIGHTLINER SEMI


BOX LABEL

Classic Freightliner Semi Truck

HandmadeWood Toy

semi- remolque

Documents