how to measure a dome ceiling - archways and ceilings

2
Archways & Ceilings Made Easy • PO Box 5243 • Arlington, TX 76005 • www.CeilingsMadeEasy.com Most of the time, domes are framed flush with your ceiling and rise up into your attic space. Occasionally, builders will fur down a faux ceiling if they do not have sufficient room in the attic space or if framed under a second floor. When framing the box for your dome ceiling, it is important to take note of the placement of the dome relative to the pitch of the roof so it will not extend beyond the roof rafters. If you have any inquiries about the placement of the dome relative to the pitch of the roof, please enlist our “2D or 3D CAD Me” services to be certain. Clearance Whats Popular? www.CeilingsMadeEasy.com How to Measure a Dome Ceiling Still have questions? View the photo galleries or give us a call toll free. 1 Determine the width of your squared box. 2 Determine if you would like to have an inner light ring. This is either a “Yes” or “No” option. Note: Please reference the “Inner Light Ring” section on the right hand side. 3 Choose your dome style: soft or half-circle. Note: Please reference “Clearance” section on the right hand side. Box= the width of your squared rough opening Light Ring= the option to add a inner light ring. Style= the choice between a soft rise or a half circle rise dome. Understanding the Measurements Qty Box Light Ring Style Location 1 96 Yes S Dining Rm. 4 Determine your location. The dome ceiling kit will be labeled with the location of where it will be installed. This will ensure accurate placement during installation. Inner Light Rings Inner light rings are an easy way to add indirect lighting to your dome ceiling. Please note that when adding an inner light ring, the finished opening in your ceiling will be smaller than the rough opening by 1’-0”. This is due to the fact that all inner light rings are framed 6“ in from the outer ring. Therefore, depending on the circle you want visible from the floor looking into the dome, you may want to add a foot to your box to offset the one foot you will lose when adding an inner light ring. What is more popular? To have or not to have an inner light ring? 76 % Prefer to have an Inner Light Ring 24 % Prefer not to have an Inner Light Ring What style if most popular? 84 % Prefer to have a soft rise 16 % Prefer to have a half circle rise * Percentages based on 2008 sales.

Upload: others

Post on 03-Feb-2022

2 views

Category:

Documents


0 download

TRANSCRIPT

Archways & Ceilings Made Easy • PO Box 5243 • Arlington, TX 76005 • www.CeilingsMadeEasy.com

Most of the time, domes are framed flushwith your ceiling and rise up into your attic space. Occasionally, builders will fur down a faux ceiling if they do not have sufficientroom in the attic space or if framed undera second floor. When framing the box for your dome ceiling, it is important to take note of the placement of the dome relative to the pitch of the roof so it willnot extend beyond the roof rafters.

If you have any inquiries about the placement of the dome relative to the pitch of the roof, please enlist our “2D or 3D CAD Me” services to becertain.

Clearance

Whats Popular?

www.CeilingsMadeEasy.com

How to Measure a Dome Ceiling

Still have questions? View the photo galleries or give us a call toll free.

1Determine the width of your squared box.

2Determine if you would like to have an inner light ring. This is either a “Yes” or “No” option. Note: Please referencethe “Inner Light Ring” section on the right hand side.

3Choose your dome style: soft or half-circle. Note: Please reference “Clearance” section on the right hand side.

Box= the width of your squared rough openingLight Ring= the option to add a inner light ring.Style= the choice between a soft rise or a half circle rise dome.

Understanding the Measurements

Qty Box Light Ring Style Location

1 96 Yes Soft Dining Rm.

4Determine your location. The dome ceiling kit will be labeled with the location of where it will be installed. This will ensure accurate placement during installation.

Inner Light RingsInner light rings are an easy way to addindirect lighting to your dome ceiling.

Please note that when adding an inner light ring, the finished opening in yourceiling will be smaller than the rough opening by 1’-0”. This is due to the fact that all inner light rings are framed 6“ in from the outer ring. Therefore, depending on the circle you want visible from the floor looking into the dome, you may want to add a foot to your box to offset the one foot you will lose when adding an inner light ring.

What is more popular? To have or not to have an inner light ring?

76 % Prefer to have an Inner Light Ring24 % Prefer not to have an Inner Light Ring

What style if most popular?

84 % Prefer to have a soft rise16 % Prefer to have a half circle rise

* Percentages based on 2008 sales.

17 1/2”18 1/2”19 1/2”20 1/2”21 1/2”22 1/2”23 1/2”24 1/2”25 1/2”26 1/2”27 1/2”28 1/2”29 1/2”30 1/2”31 1/2”

32 1/2”33 1/2”34 1/2”35 1/2”36 1/2”37 1/2”38 1/2”39 1/2”40 1/2”41 1/2”42 1/2”

43”44”45”46”