Eng. Technology ProjectSE 101 LACC

Team #

NOTE• The following is just a model. You are not limited to

it. You are welcome to expand it as much as you need.

• Please avoid filling out the slides with lots of words• Once report is done ask someone else to revise it.• Document how you build your product (be creative)• Very important: Clean up (or edit) the document. Do

not leave extra info. Points will be deducted.

NOTE• Very Important: Make sure to include supporting

documentation to prove your work. Example of support documentation:o Scan documentso Pictures and Videoso Drawings and sketcheso Tables and Graphso Simulations and o whatever else you can come out with (BE CREATIVE)

Agenda• Executive Summary

• Problem Solving Skills

• Eng. Design Process– Identification of Problem & Specs– Brainstorm of possible solutions– Design

• Drawings• Circuit schematics• Multisim• Math Analysis

– Build– Test & Evaluate– Redesign (if needed)– Share Solution

• Budget Analysis

• Conclusion

Executive Summary• An executive summary is a short section of a document

that summarizes a longer report in such a way that readers can rapidly become acquainted with a large body of material without having to read it all.

Problem Solving Skills•Briefly explain how this project was broken down into smaller tasks and why. State the role and task assigned to each team member.

Name Role Task Assigned

Eng. Design Process• Identification of Problem and Specifications

Eng. Design Process• Brainstorming Possible Solutions

Eng. Design Process• Design

• Drawings• Circuit schematics• Multisim• Math Analysis

Eng. Design Process• Build

Eng. Design Process• Test & Evaluate

Eng. Design Process• Redesign if needed

Eng. Design Process• Share your solution

Eng. Design ProcessEDP

• Budget Analysis

Overhead Cost

Product Materials

Engineering Hours

Total

+ Profit (?%)

This is what your team will charge for creating a prototype:

• This is the overall budget. You must specify details by using other tables.

• To compute Eng. Hours please see Eng. Tech lecture ppt.

Conclusion• Write down what you did, accomplished, and how it

was achieved. Which type of analysis was applied and why. State an overall conclusion.

Special Thanks To• Write a comment if you wish.

Team Member Name Roll Email