PM102Cold Planer

Cat® C7 Engine with ACERT®

Gross Power (SAE J1995) 168 kW 225 hpOperating Weight 17 600 kg 38,810 lbRotor Width 1000 mm 40"Rotor Depth (maximum) 305 mm 12"

2

PM102 Cold PlanerThe PM102 combines enhanced production capabilities, optimized performance and simplified service to complete tough milling applications with productive results.

C7 Engine with ACERT Technology

ACERT Technology works at the pointof combustion to optimize engineperformance and provide low exhaustemissions. The C7 engine with ACERTTechnology provides clean burningpower. pg. 4

Rotor Drive

A Cat® dry clutch with automatic belttension adjustment delivers efficientand reliable power to the pavement.The rotor drive consists of field-provenCaterpillar components for long servicelife. pg. 7

Propel System

Propel pump provides balanced flow todual displacement drive motors on eachtrack. Provides superior tractive efforton slippery surfaces. The electronicallycontrolled load sensing system matchespropel speed to load on rotor formaximum production. pg. 5

Loading Conveyor

The PM102 features a folding frontloading conveyor for easytransportation. The conveyor swings 41 degrees to the left or right to meetyour job requirements. pg. 8

Anti-slab and Collecting Conveyor

A large discharge opening and widecollecting conveyor belt clear out thecutter box fast. Water spray system forlubrication, cooling and dust reduction.pg. 8

Rotor

Rotor with quick release conical toolholders for quick and easy toolreplacement. pg. 6

3

Serviceability

The power-assisted engine hood openswide and provides exceptional access tothe engine, hydraulic pumps and dailyservice points. Hydraulic rotor servicedoor provides convenient access to therotor for easy cutting tool removal andreplacement.

The rotor service door also provideseasy access to the water spray nozzlesfor inspection and replacement withoutthe need for tools. pg. 11

Steering Right Rear Track

Compact dimension and steering rightrear track provides optimum machinehandling, facilitating precise operationin confined areas. pg. 10

Automatic Grade and Slope Controls

The optional grade and slope systemsprovide precise control of rotor to a preset cutting depth and cross slope. pg. 7

Operator’s Station

Ergonomic design emphasizes comfort,visibility and easy operation. Machinecontrols are grouped and convenientlylocated to enhance operator productivityand reduce fatigue. pg. 9

Flush Cutting Feature

Flush cutting operation with hydrauliccontrol allows the PM102 to be used upclose to a curb, wall or guard rail. pg. 10

Reliability and durability you expect.Proven components and technology ensure maximumperformance in the most demanding job specifications. The compact sized PM102 performs full-depth removal ofasphalt and concrete pavements with optimum productiveresults.

4

Engine. US Tier 3 and EU Stage IIIAcompliant C7 engine with ACERTTechnology combines proven systems withinnovative new technologies to preciselydeliver fuel to the combustion chamber. Itmaintains engine performance, efficiencyand durability while dramatically reducingemissions.

The Cat C7 is a 7.2 L displacement, 6-cylinder, electronically governed engine.Electronic fuel injection is provided throughthe well-proven Caterpillar hydraulicallyactuated, electronically controlled unitinjection (HEUI) system. A wastegateturbocharger, equipped with a titaniumwheel for improved durability, combinedwith air-to-air aftercooling (ATAAC)provides consistent high horsepower withincreased altitude capability.

Optimum power. The engine performs at afull-rated gross power of 225 hp (168 kW)at 2200 rpm. Engine power curve isoptimized for milling applications providingoptimum power while keeping the engineoperating at peak efficiency.

The ADEM™ A4 electronic controlmodule. This module manages fueldelivery, valve timing and airflow forefficient performance per gallon(liter) of fuel used. The controlmodule provides flexible fuelmapping, allowing the engine torespond quickly to varyingapplication needs. It monitors engineand machine conditions while keepingthe engine operating at peakefficiency.

Engine Block and Pistons. The grey cast iron engine block is made of thesame material as the cylinder heads.Wall diameters are thicker than inprevious designs while adjustmentshave been made to reduce soundlevels and increase rigidity. One-pieceall-steel pistons are housed within awet, replaceable cast iron cylinderliner constructed of high-strength,heat-treated castings. Steel-forgedconnecting rods are larger in diameter.

Easier service, maintenance andrepair through monitoring keyfunctions and logging criticalindicators. Advanced electronicdiagnostic capabilities are possibleusing Cat Electronic Technician.

High cylinder pressures. High cylinderpressures combined with tightlycontrolled tolerances promoteextremely efficient fuel burn, less blowby and lower emissions.

Hydraulically Actuated Electronic Unit Injectors (HEUI). The HEUIsystem has been at work in Cat enginesacross the product line with a proventrack record of consistent, durable,reliable performance.

Precise multiple injection fueldelivery. Combustion chambertemperatures are lowered by preciselyshaping the combustion cycle,generating fewer emissions andoptimizing fuel combustion. The resultis more work output for your fuel cost.

Turbocharged and air-to-airaftercooling. High horsepower withincreased response time is assuredwhile keeping exhaust temperatureslow for long hours of continuousoperation.

C7 Engine with ACERT TechnologyACERT Technology maintains engine performance, efficiency and durability while reducingemissions. Meets US Tier 3 and European EU Stage IIIA emission regulations for off-roadapplications.

5

Propel SystemHydrostatic drive with hydraulic flow provided by a variable displacement axial pistonpump. Dual displacement drive motors on each track provides balanced tractive effort.

Load control system (anti-stall).The electronically controlled systemmatches propel speed to load on enginefor maximum production.

Two speed ranges. The machineoperates at either maximum torquethroughout the entire milling speedrange or at a faster travel speed formoving around the job site.

Positive traction control (flow divider).Equal hydraulic oil flow to each drivemotor increases tractive effort in hardcutting applications. The positivetraction control is actuated from theoperator’s console.

Polyurethane track pads. Track pads inpolyurethane provide long service lifeand positive traction on all pavementsurfaces. 1 Two Speed Drive Motor

2 Polyurethane Track Pads3 Heavy-duty Rollers4 Planetary w/Secondary Brake

2

1

3

4

Total traction. The hydrostatictransmission on all four wheels, via aflow divider, and self levelling frontaxle ensure positive traction andoptimum performance in allapplications.

Optimum maneuverability. The large,wide-tread tires provide optimummaneuverability on tight curves andtraction when driving in and out of the cut.

High travel speed. The high travel speedof the PM102 significantly reducesrepositioning times and machine transferon the job site.

Flush cutting. The right rear wheelsupport can be positioned inside themachine’s cutting width for full flushcutting applications. With the right rearwheel swung in, the machine can cutclose to a wall, barrier, or other verticalobstruction.

Wheel Undercarriage OptionWheels provide high travel speeds, which reduce machine repositioning times.

6

RotorDesigned for high production and long service life. Quick release conical tool holders forquick and easy tool replacement.

97 carbide-tipped tools. Tools aremounted in durable three-piece, quickrelease patented tool holders andarranged in a triple wrap flightingpattern for maximum breakout force.

Quick release conical tool holders. Atapered fit maintains tightness in holderbase. Fast and effortless tool removal isprovided by the quick release conicaltool holder tool removing system.

Large replaceable carbide facedloading paddles. Loading paddleseffectively move milled material ontocollecting conveyor resulting in higherproduction and less wear on inside ofrotor chamber and cutting tools.

Optimum tool spacing. Triple-tree toolplacement on rotor ends providesoptimum tool spacing to clean up loosematerial and reduces wear on drumwhen maneuvering in the cut.

Quick release three-piece tool holder.

7

Rotor DriveDelivers maximum available horsepower to each cutting tool.

Mechanical dry clutch. The rotor driveconsists of trapezoid pulleys, moldedhigh-strength belt and a hydraulic-coupling dry clutch. The field-provendrive system delivers reliability andlong service life.

Drive train protection. A drive trainprotection device protects rotor drivesystem, rotor and tools by instantlydisengaging rotor drive whenever anabrupt drop in rotor rpm occurs.

Two cutting speeds. Upper and lowersheaves are easily interchangeable formaximum torque with the toughestmaterials and different material sizingrequirements.

Molded six-rib high tensile belt. Hightensile belt provides efficienttransmission and long service life.

Automatic belt tension adjustment. Thehydraulically powered automatic drivebelt tensioner prevents rotor drive beltslippage and reduces maintenance.

1 Upper Sheave 2 Molded Drive Belt3 Lower Sheave4 Tension Cylinder

1

2

34

Automatic Grade and Slope Control OptionThe optional grade controls provide precise control of rotor to a preset cutting depth.System can be configured to control grade or cross slope.

Contacting wire rope grade sensors.Wire rope grade sensor measures sideplate movement that enables the entirelength of the side plate to become anaveraging device for extremely accurategrade matching. Cross slope sensoradds to system versatility.

Leveling control boxes. Two controlboxes located at the operator’s stationallow manual or automatic levelingadjustment. Constant read-out for rotordepth and cross slope are displayed oneach control box and is easily visibleeven in direct sunlight or low lightconditions.

1 Contacting Grade Sensor 2 Leveling Control Boxes

1

2

Cover removed for clarity.

8

Primary Collecting ConveyorThe collecting conveyor belt efficiently clears out the cutter box fast. Water spray systemfor lubrication, cooling and dust reduction.

Optimum material sizing and gradation.The hydraulically operated anti-slabdevice prevents slabbing of the roadsurface, protects the collectingconveyor and ensures an optimumdischarge opening to the rotor chamber.

550 mm (21.6") wide collectingconveyor. Driven by a high torquehydraulic motor for maximumefficiency. An optional 600 mm (23.6")wide collecting conveyor is alsoavailable.

Variable belt speed. The collectingconveyor features variable belt speedfor optimum production in allapplications. Reversible belt rotationcontrol is also provided.

Optimum dust reduction. Standardpressurized water spray lubricates andcontrols dust on collecting belt. Waterspray nozzles are easily removed forinspection and replacement without theneed for tools.

Folding Front Loading ConveyorHigh capacity and versatility add to increased job site productivity. Conveyor can be foldedto reduce machine dimensions during transport.

Folding conveyor. Machinetransportation is made easier by thefolding front conveyor that reduces themachine dimensions.

600 mm (23.6") wide upper conveyor.Height adjustment is hydraulicallycontrolled and two cylinders provide a41 degree swing to the left and right.

Variable loading belt speed andreversible rotation. The front loadingconveyor also includes variable beltspeed and reversible belt rotationcontrol. The loading belt speed isinfinitely variable and providesoptimum discharge capability foruniformly loading the haul truck.

Simplified conveyor removal.Quick-fitting hydraulics and mechanicalconveyor components allow the frontconveyor to be easily detached from themachine.

9

Operator’s StationDesigned for efficiency, productivity and simple operation. Easy to reach controls minimizeoperator fatigue.

Ergonomic operator’s station. The fullwidth operator’s station provides a viewof the front loading conveyor and sideplates for precise and rapid positioning.

Suspension seat. Durable suspensionseat with armrest provides optimumoperator comfort.

Warning horns and shut down buttons.Located on the operator’s station and atground level control stations.

Hydraulically operated canopy option.Full width canopy with two extendingside wings and front windshield andrear window provides optimumoperator comfort and protection.Canopy can be hydraulically loweredduring transportation.

Operating controls. The distribution andclear instrumentation layout on thefront and side control consoles havebeen designed to ensure minimumoperator effort and maximumautomation. All gauges and displays areeasily visible even in direct sunlight.

Graphic display. A large display, easilyvisible in direct sunlight, providesoperating parameters for machine andengine diagnostics. The display presentsa single interface for service diagnosticsand calibration. Standard display isblack and white; an optional colordisplay is available.

Computerized monitoring system. Thesystem constantly monitors systempressures and engine condition withmultiple modes of operation. Alerts theoperator if a problem does occur withthree levels of event information.

Standby control. A single switch controlallows the operator to engage ordisengage main operating functionsincluding propel, water spray system,leveling system and conveyor rotationfor maximum automation.

The large display providesoperating parameters formachine and engine diagnostics.(Optional color display shownat left.)

10

Steering Right Rear TrackOptimum machine handling for precise control and production.

Precise control. A microprocessorelectronically controls the steeringangle of the right rear track. The reartrack steering angle is automaticallyadjusted in relation to the position ofthe front tracks.

Enhanced steering ability. Themachine’s rear track steering featurefacilitates operation in confined areasand ensures a close cut around cul-de-sacs or turns. The right rear track steersin both positions, whether positionedwithin or outside the cutting width.

Flush Cutting FeatureFull flush cutting operation with hydraulic control of the right rear leg allows the PM102 to be used up close to a curb, wall or guard rail.

Flush cutting. The right rear leg can beswung in within the machine’s cuttingwidth for full flush cutting applications.With the right rear leg swung in, themachine can cut close to a wall, barrieror other vertical obstruction.

Exclusive Caterpillar single-pieceswing-arm design.The swing-in arm mechanism ensuresincreased rigidity eliminating excessivewear for increased component life.

Automatic control. The rear leg swing-in system is automatic andcontrolled from the operator’s station.The operator is not required to leave theseat while positioning the right rear legwithin the machine’s cutting width.

Leg in the full-out position.

Leg in the full-in position.

Leg in the swing-in position.

11

Reliability and ServiceabilityReliability and serviceability are integrated into every Caterpillar machine. Theseimportant features keep your machine investment profitable.

Quick-connect hydraulic test ports.Quick-connect feature simplifies systemdiagnostics.

Ecology drains. Environmental methodto drain fluids. They are included on theradiator, engine oil pan, hydraulic andfuel tank.

S•O•SSM ports. Scheduled Oil Sampleports allow for simple fluid collectionof hydraulic oil.

Secure hose routing. Polyethylenerouting blocks provide a secure routingto reduce rubbing and increase servicelife of hoses.

Maintenance-free Caterpillar batteries.Batteries are mounted at the rear of themachine. Cat batteries are specificallydesigned for maximum cranking powerand protection against vibration.

Large engine service doors provideexcellent access to engine andhydraulic components from groundlevel.

Large service doors. Large servicedoors provide excellent access to engineand hydraulic components. Engine sidecovers swing wide to allow ground-levelaccess to engine. Rear cover swings upfor access to radiator and oil cooler.

Hydraulic rotor service door. The rotorservice door opens wide for easy accessto rotor for inspection and toolmaintenance.

Electronic Control Module (ECM). ECMmonitors machine systems and providesself-diagnostics for operator or servicepersonnel.

All-weather connectors. Nylon braidedwrap ensure electrical system integrity.

Visual indicators. Visual indicatorsallow easy check of water spray tanklevel and hydraulic oil tank level.

Accessory drive system. In the event ofa microprocessor malfunction, fulloperational control of main machinefunctions is readily available to allowassisted machine movement formaintenance and servicing.

12 PM102 specifications

EngineSix cylinder Caterpillar C7 withACERT Technology, turbocharged air-to-air after-cooled diesel engine.Meets European EU Stage IIIAemissions control standards..

Engine Cat® C7Gross Power kW hp

SAE J1995 168 225Net Power kW hp

ISO 9249 156 209EEC 80/1269 156 209SAE J1349 151 203

SpecificationsBore 110 mm 4.3"Stroke 127 mm 5.0"Displacement 7.2 liters 442 in3

■ The power ratings apply at a ratedspeed of 2200 RPM when testedunder the reference conditions for thespecific standard.

■ The net power advertised is thepower available at the flywheel whenthe engine is equipped with analternator, air cleaner, muffler andfan.

■ Derating is not required up to analtitude of 3000 m (9850').

■ Cold mode starting aid, dual fuelfilters with water separator and aircompressor are standard.

Propel SystemHydrostatic drive with hydraulic flowprovided by a variable displacementpiston-type pump. Drive motors withplanetary gear reduction on each trackor wheel provides balanced tractiveeffort. Machine can be equipped witheither a track or wheeled undercarriage.

Features

■ A variable displacement, piston-typepump with electronic displacementcontrol supplies pressurized flow.

■ Positive traction control valveprovides equal hydraulic oil flow toeach drive motor to increase tractiveeffort in hard cutting.

■ Drive motors have two swashplatepositions allowing operation at eithermaximum torque throughout theentire milling speed range or at afaster travel speed for moving aroundthe job site.

■ Gear selection controlled electricallyby a two-position switch on theoperator’s console.

■ Infinitely variable machine speed anddirection of travel controlled bypropel lever and speed dial.

■ Load control system, controlled byElectronic Control Module (ECM),matches propel speed to load on theengine for maximum production.

■ Track undercarriage – tracks are 720 mm (28.3") long, 225 mm (8.8")wide and feature replaceablepolyurethane track pads.

■ Wheel undercarriage – wheels have adiameter of 660 mm (25.9") and are260 mm (10.2") wide.

Max. Speeds (forward and reverse):

Track undercarriageOperating 27 mpm - 89 fpmTravel 4.1 km/h - 2.5 mph

Wheel undercarriageOperating 46 mpm - 151 fpmTravel 6.4 km/h - 3.9 mph

Rotor Drive SystemOperates direct through a hydraulicallyactuated, dry clutch driving a planetarygear reducer.

Features

■ Heavy-duty dry clutch mountsdirectly to the engine. Hydraulicallyactuated by a ON/OFF switch on theoperator’s console.

■ Mechanical dry clutch consists oftrapezoid pulleys, molded high-strength belt and a hydraulic-couplingdry clutch. The field-proven drivesystem delivers reliability and longservice life.

■ A drive train protection deviceprotects rotor drive system, rotor andtools by instantly disengaging rotordrive whenever an abrupt drop inrotor rpm occurs.

■ Molded six-rib high tensile strengthdrive belt drives the rotor through adrum drive gear reducer locatedinside the rotor mandrel.

■ Hydraulically powered automaticdrive belt tensioner prevents rotordrive belt slippage and reducesmaintenance.

■ Upper and lower sheaves are easilyinterchangeable for maximum torquewith the toughest materials anddifferent material sizingrequirements.

Rotor Speed:

@ 2200 engine rpm 118 rpm

13

Rotor Housing■ Rotor housing is made with hi-grade

anti-wear material for long servicelife.

■ Large discharge opening clears outthe rotor housing fast for increasedproduction and reduced tool wear.

■ Side plate contact surfaces featureswear-resistant materials for reducedwear and longer service life.

■ Floating moldboard with adjustabledown pressure is standard.

■ Height control for rotor door locatedat operator’s station and at twoground level control stations.

SteeringHydraulic power-assist steering withsteering wheel on operator’s console.

Features

■ Double-acting steering cylinderscontrol the front and right rear tracks.

■ Steering of the right rear track iselectronically controlled with angleadjusted in relation to the position ofthe front tracks.

Cutting Radius (to the right):

Track undercarriage 3.45 m (11' 3")Wheel undercarriage 2.10 m (6' 8")

BrakesPrimary Brake Features

■ Closed-loop hydrostatic driveprovides dynamic braking duringnormal operation.

Parking Brake Features

■ Spring-applied/hydraulically-releasedmultiple disc type brake mounted oneach gear reducer. Brakes are appliedautomatically when propel lever is inthe neutral detent position.

■ Secondary brakes are activated by abutton on the operator’s console, lossof hydraulic pressure in the brakecircuit or when the engine is shutdown.

■ Propel pump is destroked whenparking brake is engaged. Propellever must be returned to neutral afterbrake is released before machine willpropel.

Conveyor System■ Collecting conveyor is driven by a

high torque hydraulic motor to ensuremaximum production and clearingout the rotor housing effectively.

■ Variable belt speed control forcollecting and front loadingconveyors controls loading of milledmaterials to closely match materialtype and amount.

■ Both conveyor belts can be reversedfor quick clean out.

■ Folding front loading conveyorfacilitates machine transportation.

Collecting Conveyor

Width Standard - 550 mm 21.6"Optional - 600 mm 23.6"

Speed 252 mpm 827 fpm

Upper Conveyor

Length 6.3 m 20' 6"Width 600 mm 23.6"Speed 252 mpm 827 fpmSwing (from center) 41 degrees

PM102 specifications

Water Spray System■ Centrifugal pump supplies water to

spray nozzles for dust control andbelt lubrication.

■ Water spray nozzles focuses thewater spray in a flat fan pattern to therotor for better cooling of cuttingtools.

■ Nozzles are easily removed forinspection and replacement withoutthe need for tools.

■ Standard system includes gauges tomonitor water pressure, a low waterlevel indicator and water controlvalves to conserve water usage.

■ Water tank can be filled from the topof the machine or at ground level.

Hydraulic System■ Pumps for propel, collecting and

upper conveyors, auxiliary hydraulicsand cooling fan are installed on theengine mounting pad.

■ Hydraulic oil cooler located at therear of the machine is designed forefficient cooling and easy access forcleaning.

■ Three-micron filtration on pressureside of auxiliary flow and seven-micron filtration on return side.

■ Quick-connect hydraulic test portssimplify system diagnostics.

14 PM102 specifications

Automatic Grade and Slope System.Automatically controls rotor depth andcross slope to a preset cutting depth.Contacting wire rope grade sensormeasures side plate movement thatenables the entire length of the side plateto become a mini averaging ski foroptimum grade matching. System alsoincludes a cross slope sensor to meetslope applications/requirements in jobspecifications.

Digital Cameras. Two high-definitiondigital cameras fitted to the rear of themachine provide a view of the groundbehind the rear door and area behind themachine.

Hydraulically Operated Canopy. Fullwidth canopy with two side extendingwings and front and rear windshieldsprovides optimum operator comfort andprotection. Canopy can be hydraulicallylowered for transportation.

High Pressure Washdown System. Thissystem uses water from the water spraysystem tank to help with machine clean-up at the end of each day’s operation.System includes a spray wand and hosewith a quick-connect coupler.

Color Graphic Display. A large display,easily visible in direct sunlight, providesoperating parameters in color formachine and engine diagnostics. Thedisplay presents a single interface forservice diagnostics and calibration.

Water Tank High Capacity RefillingPump. A hydraulically driven waterpump provides fast water tank refilling

Roading Light Package. Front and rear-facing headlights with directionalindicators. Light package used forhighway transport purposes only.

600 mm (23.6") Wide CollectingConveyor. The extra width of thisconveyor provides an increase inmaterial removal volume for greaterefficiency.

Optional EquipmentNote: Some options listed may be an option in some areas and standard in others. Consult your dealer for specifics.

Rotor Specifications■ Tools are mounted in durable three-

piece, quick release tool holders.■ Holders feature a tapered fit to

maintain tightness in holder base.■ The quick release tool holders allow

fast and easy replacement of tools.■ Large replaceable carbide faced

loading paddles effectively movesmilled materials onto collectingconveyor resulting in increasedproduction.

Rotor

Cutting width 1000 mm 40"Cutting depth 305 mm 12"Number of tools 97Tool spacing (tip) 15 mm 0.6"

Grade and Slope ControlMachine elevation – rotor depth and cross slope controlled manually by operator isstandard. Automatic rotor depth and slope control is optional and features electronicover hydraulic control. Slope sensor adds versatility.

Features

■ Machine elevation controls located on the operator’s console allows rotor depth andcross slope to be controlled manually. Visual depth gauge displays depth of cut.

■ The optional AUTOMATIC grade and slope control automatically controls rotordepth and cross slope to a preset cutting depth. Setting cutting depth is easilyaccomplished first in manual mode by using the adjustment knob on the controller.

■ Wire rope contacting grade sensor measures side plate movement that enables theentire length of the side plate to become a mini averaging ski for optimum gradematching.

Service Refill CapacitiesLiters Gallons

Fuel tank 400 105Cooling system 35 9.3Engine oil w/filter 31 8.1Propel planetarygear reducer (each) 0.9 0.24Hydraulic tank 110 29Water spray system 1060 280

FrameFabricated from heavy gauge steelplates and structural steel tubing. Trackassembly features track frame stops tolimit track angles, improving themachine’s ability to propel out of deepcuts. Top of deck and steps feature non-skid treads for sure footing.

ElectricalThe 24-volt electrical system consistsof two maintenance-free Cat batteries.Electrical wiring is color-coded,numbered and labeled with componentidentifiers. The starting system provides750 cold cranking amps (cca). Thesystem includes a 65-amp alternator.

15PM102 specifications

DimensionsOperating

A Overall length (conveyor up) 10.7 m 35' 1"B Overall machine width (right rear leg in)

Track undercarriage 1.98 m 6' 5"Wheel undercarriage 2.0 m 6' 6"

C Maximum height (canopy raised) 3.4 m 11' 2"D Minimum height 2.38 m 7' 8"E Maximum truck clearance 4.8 m 15' 7"

Conveyor swing 41 degrees left or right of centerCollecting conveyor width 550 mm 21.6"Upper conveyor width 600 mm 23.6"

Inside turning radiusTrack undercarriage 3.45 m 11' 3"Wheel undercarriage 2.10 m 6' 8"

Shipping

F Length of base machine 5.33 m 17' 5"G Length (conveyor folded) 8.5 m 27' 8"H Height (conveyor folded) 3.1 m 10' 1"I Height (canopy folded) 3.1 m 10' 1"J Maximum width

Track undercarriage 2.5 m 8' 2"Wheel undercarriage 2.4 m 7' 9"

WeightsOperating WeightsTrack undercarriage 17 600 kg 38,810 lbWheel undercarriage 17 100 kg 37,705 lb

Weights shown are approximate and include coolant, lubricants, full fuel tank, full water tank and a 75 kg (165 lb) operator.

Shipping WeightsTrack undercarriage 17 100 kg 37,705 lbWheel undercarriage 16 400 kg 36,160 lb

Weights shown are approximate and include coolant, lubricants, 50% fuel level and empty water tank.

RPM102

D

C

A

H

E

F

BJ

I

G

QEHQ1259-01 (2/07)(Replaces QEHQ1169)

© 2007 Caterpillar

All Rights Reserved.

For more complete information on Cat® products, dealer services, and industry solutions, visit us on the web at www.cat.com

Materials and specifications are subject to change without notice. Featured machines in photos may include additional

equipment. See your Caterpillar® dealer for available options.

CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE™ trade dress, as well as corporate and

product identity used herein, are trademarks of Caterpillar and may not be used without permission.

PM200

Operating Weight 30 900 kg 68,135 lbGross Power (SAE J1995) 429 kW 575 hpCutting Width 2010 mm 79"Cutting Depth 320 mm 12.6"Propel Speeds

Operating 38 mpm 125 fpmTravel 5.9 km/h 3.6 mph

Rotor Drive Two six-rib high tensile beltsClutch Hydraulic/wet multi-disc

PM201

Operating Weight 39 165 kg 86,360 lbGross Power 485 kW 650 hpCutting Width 2100 mm 83"Cutting Depth 305 mm 12"Propel Speeds

Operating 40 mpm 132 fpmTravel 6.0 km/h 3.7 mph

Rotor Drive Eleven-rib high tensile beltClutch Hydraulic/wet multi-disc

Caterpillar offers a comprehensive line of profilers.The PM200 and PM201 are designed to have the best productivity, reliability, versatility,visibility and ease of operation in their class.Contact your local Caterpillar dealer to learn more about the complete line of Caterpillar Paving Products.

PM102

Operating Weight 17 600 kg 38,810 lbGross Power (SAE J1995) 168 kW 225 hpCutting Width 1000 mm 40"Cutting Depth 305 mm 12"Propel Speeds

Operating 27 mpm 89 fpmTravel 4.1 km/h 2.5 mph

Rotor Drive Six-rib high tensile beltClutch Hydraulic/dry multi-disc