1002 full circlestwin bunk bed - secure.img.wfcdn.com
TRANSCRIPT
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
cation For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
1002 FULL CIRCLESTWINBUNK BED
TO OBTAIN PARTS, PLEASE CONTACT: DONCO TRADING COMPANY - FORT WORTH, TEXAS
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing
material carefully for small parts which may have come loose inside the
carton during shipment. Separate, identify and count all parts and hardware.
Compare with the parts list to be sure all parts are present.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
IMPORTANT:
PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY
* Use of power tool to assemble this
product will invalidate any claim and
damage this product making unsafe !!!
* Please assemble on a clean soft
surface to avoid damage.
!
Tools Required
(Not included)
+
1
2
3
4
56
7
8
9
10
1112
(Not included)
Fort , Texas 76140Worth
1:00 h
1002 TWIN FULL CIRCLES BUNK BED
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #
MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
Identifying the Hardware-Identify the hardware using the illustrations below.
Part List - BED1002 TWIN FULL CIRCLES BUNK
4,0 x 30 Screw
Qty
Qty
H
L
29
02
Qty
F 02
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
6
13
14
15
15
15
15
15
B 24Qty
1410 x 40 Wood Dowel
1/4 x 0 Screw101/4 x 0 Screw10
7,0 x100 Screw
4 40,0 x Screw4 40,0 x Screw
15 Wood Dowelx10015 Wood Dowelx100
10 9 Wood Dowelx 010 9 Wood Dowelx 0
D
G
J
A
M
Qty
16
Qty
Qty
Qty
Qty
Half Moon
06
02
02
02
EQty
1/4"
16
CQty
7,0 x 50 Screw
Hook Ladder
Hex Screwdriver
Qty
K 01
Qty
223,5 x 20 ScrewI
10
114
9
9
12
3
8
811
2
3
3
11
5
1
7
16
17
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
NQty
02Qty
O 02
01
02
TOPSID
E FRONT W
ITH H
OLESX3
X2
X2
X5
B
BOTTOM BED
2410 x 40 Wood Dowel
Qty
1/4 x 0 Screw101/4 x 0 Screw10D
Qty
08
Half MoonEQty
1/4"
08
Hex ScrewdriverK
Qty
01
B
B
B B
EE
D
D
D
D
D
D
B
B
B
B
B
3
3
3
4
8
9
15
2
1
EE
EE
K
D
D E
E
PREDRILLED
MARKS!
3,5 x 20 ScrewI
Qty
08Qty
L 02
I II I L
I
II
IL
03
04 4,0 x 30 Screw
Qty
H 12
H
H
H
H
H
H
H
H
H
H
A
A
M
I
IM
H
The rst slats must be xed atfi fi
3” from each headboard end.
!
SIDE-RAIL
LSA
T
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
16
7
M 0210 x 0 Wood Dowel910 x 0 Wood Dowel9
Qty
15 Wood Dowelx10015 Wood Dowelx100
AQty
023,5 x 20 Screw
IQty
04
II
7
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #
MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
05
06
Hex Screwdriver
Qty
K 01
Hex Screwdriver
Qty
K 01
1/4 x 0 Screw101/4 x 0 Screw10D
Qty
08
Half MoonEQty
1/4"
08 7,0 x100 ScrewG
Qty
04
D
D
DE
E
E
E
D
D
G
G
G
D
D
D
K
E
E
G
K
FRONT
3
4
8
8
5
6
E
E
TOP BED
CC
10
K
C
Qty
02C7,0 x 50 Screw
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #
MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
07
08 4,0 x 30 Screw
Qty
H 08
H
H
HH
H
H
H
H
The rst slats must be xed atfi fi
3” from each headboard end.
!
SIDE-RAIL
LSAT
``INSTALL SLAT KIT WITH SPACER
TAPE ON TOP (FACING UP)``
12
Qty
02C7,0 x 50 Screw Hex Screwdriver
Qty
K 01
K
C
C
C
G
G
G
K
9
9
7,0 x100 ScrewG
Qty
02
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : # MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #
MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
09
10
4,0 x 30 Screw
Qty
H 09
H
H
H
H
H
H
H
H
11
11
11
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
TO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
11
PREDRILLED
MARKS
Hook Ladder
Qty
F 02
3,5 x 20 ScrewI
Qty
06
Qty
10C7,0 x 50 Screw Hex Screwdriver
Qty
K 01
C
C
CC
CC
K
C
C C
C
C
F
F
I
I
I
I
13
14
15
15
1515
15
LADDER
F
N
NQty
02
Qty
O 02
I
I
I
O
O
O
12
4 40,0 x Screw4 40,0 x ScrewJ
Qty
02
J
J
17
J
J 17
17
13
CERTIFICATION LABEL
This bunk bed model has been tested by an
independent laboratory and is in compliance
with ASTM F-1427 Standard Consumer Safety
Specification For Bunk Beds and the Government
Code of Federal Regulations 1213 and 1513.
P
1001
RODUCT NAME / MODEL: TT
TWIN/TWIN BUNK BED
FACTORY CODE : #
MADE IN BRAZIL
349
DISTRIBUTED BY: Donco Trading Co.
Fort Worth, TX 76140
ORDER NUMBER:
13S
DATE OF MANUFACTURE : SEPTEMBER / 2015
3,5 x 20 ScrewI
Qty
04
ITO HELP PREVENT SERIOUS OR FATAL INJURIES FROM
ENTRAPMENT OR FALLS:
*Never allow a child under 6 years on upper bunk.
*Only use mattress which is 74"- 75" long and 37 1/2"- 38 1/2" wide
and maximum 9" high on upper and lower bunk.
* Ensure thickness of mattress and foundation combined does not
exceed 9"and mattress is at least 5"below upper edge of guardrails.
* Use guardrails on both sides of upper bunk.
* Prohibit horseplay on or under bed(s).
* Prohibit more than one person on the upper bunk.
* Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD
* Never attach or hang items to any part of the bunk bed that are not
designed for use with the bed; for example, but not limited to hooks,
belts, and jump ropes.DO NOT REMOVE THIS LABEL
I
ASSEMBLY INSTRUCTIONS FOR SHAKER TRUNDLE
A
B
C
D
E
F
G Spacer Qty: 02
Qty: 04
Qty: 08
10 x 40mm
3 x 15mm Qty: 16
Allen Key Qty: 01
Half Moon Qty: 04
6 x 70mm Qty: 04
H4 x 30mm Qty: 24
1
3
4
2
5
ASSEMBLY INSTRUCTIONS - SHAKER TRUNDLE
A
C
E
B
D
F
6 x 70 mm Qty: 04
Allen Key
Qty: 01
10 x 40mm Qty: 08
Qty: 04
Half Moon
Qty: 04
3 x 15 mm Qty: 16
E
E A
C
B
B
B
B
B
C
A C
D
DF
Step 01
3 4
Step 01
3 4
1
2
Step 02
Step 03