solman support desk.doc

Download solman support desk.doc

Post on 14-Apr-2018

216 views

Category:

Documents

1 download

Embed Size (px)

TRANSCRIPT

  • 7/27/2019 solman support desk.doc

    1/21

    First of all, you will need to perform some preparation steps, follow these instructions below:Check level of Basis and ABAP Support Packs in the Satellite Systems. For example: for release 4.6C,Support Package 51 (or Support Package 50 with Notes 832585 and 838537) is required. For WAS620 Support Package 54 is then required.

    Lets now start with the required configuration steps to setup Service Desk in SAP Solution Manager3.2.

    1. Activate Solution Manager Services:

    a. Go to transaction SICF. Navigate the tree below to each of the services listed. If the service iscurrently grayed out you will need to activate it. For example, navigate to /sap/public/bsp/sap/htmlb

    b. If the service is grayed out, as in the example, you need to activate it, for this, select the service,go to Service/VirtualHost Menu and then select Activate. In the following screen, select theYbutton, to activate the service and all the dependent services.

    Now, the BSP service is activated, see below:

    1

  • 7/27/2019 solman support desk.doc

    2/21

    c. The same procedure needs to be performed also for the following services:

    /sap/public/bsp/sap/htmlb/sap/bc/bsp/sap/ai_proj_setup/sap/bc/bsp/sap/dswpnotifcreate/sap/bc/bsp/sap/dswp_create_message/sap/bc/bsp/sap/dswp_bsp/sap/bc/bsp/sap/learning_map/sap/bc/bsp/sap/public/bc/sap/bc/bsp/sap/solutionmanager/sap/bc/bsp/sap/system/sap/bc/contentserver/sap/bc/solman

    2. Activating Solution Manager BC-Sets required forService Desk:

    a. Go to transaction SCPR20. The following screen will be shown:

    2

  • 7/27/2019 solman support desk.doc

    3/21

    b. In the BC set enter the BC set that needs to be activated, for example:SERVICE_DESK_CHANGE_REQUEST_32A

    c. Press the activate ( ) button. The following screen will be shown:

    3

  • 7/27/2019 solman support desk.doc

    4/21

    d. Make sure to select Expertmode and Overwrite All Data options, and then, click on the

    continue button ( ). The BC set will be now activated.

    e. Now repeat steps a through d to activate also the following BC Sets:

    SERVICE_DESK_CHANGE_REQUEST_32A

    SERVICE_DESK_CHANGE_REQUEST_32F2SERVICE_DESK_CHANGE_REQUEST_32A7SERVICE_DESK_CHANGE_REQUEST_32A8SERVICE_DESK_CHANGE_REQUEST_32A9SVDSK_CORPFUNC_SECURE_AREA_32_01

    3. Fetching SAP components:

    This will transfer the standard SAP components from SAPNet R/3 Frontend into the Solution Managersystem. Go to transaction DSWP then select Edit/Fetch SAP Componentsfrom the menu.

    4. Assign the number ranges for ABA notifications:

    a. Go to transaction DNO_CUST01 and select notification type SLF1, see screen below:

    4

  • 7/27/2019 solman support desk.doc

    5/21

    b. Select in the menu Goto -> Details

    c. Assign internal number range 01 in the in the Number Range field. Then press the save ( )button, see screen below:

    5

  • 7/27/2019 solman support desk.doc

    6/21

    5. Assign number range for Service Desk Messages:

    a. Go to transaction SPRO Open the tree and navigate to SAP Solution ManagerImplementation Guide --> SAP Solution Manager --> Basic Settings --> SAP Solution

    Manager System --> Service Desk --> Number Ranges for Notifications . Then press the

    execute icon ( ) next to Assign number range for Service Desk Messages.

    6

  • 7/27/2019 solman support desk.doc

    7/21

    b. Select transaction type SLFN from the Definition of Transaction types window, see screen belowfor details:

    c. Choose Goto -> Details from the menu:

    7

  • 7/27/2019 solman support desk.doc

    8/21

    d. Assign the internal number range 01 and the external number range 02 under Transaction /Activity Numbering:

    e. Now press the ( )button.

    6. Configuring the ABA Messages:

    a. Go to transaction DNO_CUST01 then select notification type SLF1.

    b. Choose Goto -> Details from the menu:

    8

  • 7/27/2019 solman support desk.doc

    9/21

    c. Check whether action profile SLFN0001_STANDARD_DNO is assigned, if not assign it, seebelow:

    d. Now press the ( )button.

    e. Go to transaction DNO_CUST04. Select the field NO_USER_CHECK, see details below:

    9

  • 7/27/2019 solman support desk.doc

    10/21

    f. Choose Goto -> Details from the menu:

    g. Enter X in Field Value.

    10

  • 7/27/2019 solman support desk.doc

    11/21

    h. Now press the ( )button.

    7. Generate Business Partners:

    a. Go to transaction BUSP Enter the following parameters, then press the ( ) button.

    Field Name, ValueClient, Application object

    Screen , *Generate All Screens or Just Selected Screens, All screensDelete Subscreen Containers,

    See details in the screen below:

    11

  • 7/27/2019 solman support desk.doc

    12/21

    8. Create Message Processors:

    a. Go to transaction BP (Business Partner). From the menu, choose Business Partner -> Create-> Person or edit an existing Business Partner of type person.

    b. Choose the role Employee.

    12

  • 7/27/2019 solman support desk.doc

    13/21

    c. Choose the Address tab and enter the address data for the message processor, see detailsbelow:

    d. Choose the Identification tab and go to the Employee data section:

    13

  • 7/27/2019 solman support desk.doc

    14/21

    e. Enter the user ID of the message processor in the User field. The message processor has to havea user in the SAP Solution Manager system.

    f. Click the save icon ( ).If an error message is displayed from the programCRM_MKTBP_ZCAL_UPDATE_30, see SAP Note 450640.

    g. To create additional users, repeat the steps from a through f.

    9. Create Organization Business Partners:

    a. In transaction Maintain Business Partners (transaction BP), choose Business Partner ->Create -> Organization:

    14

  • 7/27/2019 solman support desk.doc

    15/21

    b. Choose the role Sold-to Party.

    c. Choose the Address tab and enter the address data for the sold-to party, see below:

    15

  • 7/27/2019 solman support desk.doc

    16/21

    d. Choose the Sales Area Data button.

    e. Choose the Choose Sales Area... button.

    f. Select Sales Organization Sales

    16

  • 7/27/2019 solman support desk.doc

    17/21

    g. In the Sales tab, select Sol_Customergroup from the input help in field Customer Group 1.

    h. Click the save icon ( ).

    i. Repeat the steps to create additional sold-to parties.

    10. Define Service Desk destinations in the SolutionManager System:

    a. Go to transaction SPRO. Open the tree and navigate to SAP Solution ManagerImplementation Guide -> SAP Solution Manager -> Basic Settings -> SAP Solution

    Manager System -> Service Desk. Press the execute icon ( ) next to Define Service DeskDestination in the Solution Manager System.

    17

  • 7/27/2019 solman support desk.doc

    18/21

    b. In view Create Messages: Customizing, check whether application OSS_MSG exists. If itexists, go to the following step, if not, continue to c. to create it.

    c. Press the modify button and then the New Entries Button next to it.

    d. Make the following settings for the application OSS_MSG:

    Column 1: Application: OSS_MSGColumn 2: + : W

    Column 3: RFC Destination: NONEColumn 4: + : CUST620Column 5: + : 1.0

    e. Click the save icon ( ).

    11. Schedule the background jobs in Solution Manager:

    18

  • 7/27/2019 solman support desk.doc

    19/21

    a. Go to transaction SM36. For Job name enter SOLMAN_ISSUE_STATUS_REFRESH , Job class C,

    then press the Step ( ) button.

    b. Enter the information as in the screen below, and press the save icon ( ).

    12. Define Service Desk destination in the Satellitesystems:

    19

  • 7/27/2019 solman support desk.doc

    20/21

    Note: for this you need to log in the satellite system.

    a. Go to transaction SM30.

    b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:

    c. Press the Continue button in the following screen:

    d. You should see the following screen, no entries should be seen in the table. Press the NewEntries button:

    20

  • 7/27/2019 solman support desk.doc

    21/21

    e. In the next screen, enter the following information:

    In the RFC Destination you should point to your Solution Manager destination RFC.

    This completes the basic configuration to enable Service Desk in your Solution Manager system andalso this enables the creation of Support Desk messages through any of your NetWeaver systems.

    Stay tuned for more !!!

    Related Solution Manager configuration guides on SDN

    System Monitoring configuration guide for Dummies.

    Service Desk configuration guide for dummies.

    SDCC - Service Data Control Center configuration guide for Dummies.

    CCMS Rule Based Monitors configuration guide for Dummies.

    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3544https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3490https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3538https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3553https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3544https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3490https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3538https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3553