resume - chris massey
TRANSCRIPT
28 Glencoe Blvd.
Sherwood Park, AB
780-721-4862
CHRIS MASSEY
OBJECTIVE As a field service representative for the past nine years, my goal is to secure a position where my
skills and past experience will be utilized to their fullest, contributing to the growth of my
employer in a setting of honesty and integrity.
PROFESSIONAL
ACHIEVEMENTS
TURBINE COMMISSIONING/INSTALLATIONS
2013
One Titan 130 compressor unit for TCPL
Two Titan 130 generator sets for Shell Canada
Two Centaur 50 generator sets and one Taurus 60 generator set for Arc Resources.
2012
Four new installations at Alta Gas Harmattan: one Titan 130 generator set; one Taurus 70
mechanical drive; and two electrical drive compressors.
INTERNATIONAL ASSIGNMENT
The Australian district approached the Canadian district to supply them with a reliable
Field Service Representative who was capable of performing commissioning tasks in the
Australian outback, with limited resources and support. I was chosen to assist with
commissioning of two Taurus 70 compressor sets situated four hours west of Brisbane in
the Australian outback during July, 2014, while the local Field Service Representatives were
on a course. Assisted the customer with process yard valve set up and assisted two
subcontractors to set up fuel skid and anti-surge systems.
RETROFITS
2014
A retrofit of a Centaur 50 to a Taurus 60 engine at Harvest Energy. This retrofit also
required the rear trunnion to be moved, machined and welded. Generator bearings were
exchanged with commissioning of a new fuel module installation and controls. The
generator bearings and installation of the rear trunnion mount are outside the scope of
typical field service, but were carried out to ensure deadlines were met due to the
technical aspect of this job. The customer has since approached Solar Turbines field service
to assist with construction of the power plant and final commissioning of the Taurus 60
generator set.
Participated as a key member of the project team for a wet seal to dry gas seal exchange of
two tandem body compressors for Fortis B.C.
2013
Five retrofits for Fortis BC Gas: two retrofits consisted of complete replacement of the fuel
system, control system and emergency circuit for compressor seal system; the remaining
three retrofits consisted of replacing wet seal systems.
Page | 2 Chris Massey
SKILLS Excellent organizational and prioritization skills
Skilled in teaching and mentoring of others in technical/mechanical procedures
Proficient in inventory and supply management
Adept at multi-tasking
Able to work in stressful situations and successfully complete challenging tasks within
required time parameters and budgets
Eagerly accepts change and challenges, adapting with minimal instruction
Enjoys working within a team environment and also able to work unsupervised
Manages multiple projects while maintaining a high level of customer service
WORK HISTORY FIELD SERVICE REPRESENTATIVE LEVEL THREE, SOLAR TURBINES OF CANADA, EDMONTON AB
August 2005 – Present
Tasks included: engine removal/installations; alignments; trouble shooting mechanical/electrical
problems; general service of packages; retrofits and new installation of equipment. Experience
with Allan Bradley software, specifically RS networks.
EDUCATION AIRCRAFT MAINTENANCE ENGINEER DIPLOMA, NORTHERN LIGHTS COLLEGE, DAWSON CREEK,
B.C.
Licensed Aircraft Maintenance Engineer M1 Rated, License #426215
TRAINING COURSES COMPLETED
Turbine Training Courses
Compressor Performance, Solar Turbines, 2008
Control System Logic – Relay for Solar Gas Turbine Generator Sets, Solar Turbines, 2006
Familiarization of CSI2120 & FastBal II, Emerson Process Management, 2008
Power Generation, Solar Turbines, 2008
Health, Safety, Security and Environmental Management System training (formerly QHSE),
Solar Turbines, ongoing
TT3 Applications and Principles, Solar Turbines, 2007
TT4000 Applications and Principles, Solar Turbines, 2007
Turbine Performance, Solar Turbines, 2009
Turbine Teardown and Field Repair training, Solar Turbines, 2011 and 2014
Turbotronic 4 Field Applications for System Operational Analysis, Modification and
Verification Techniques, Solar Turbines, 2008
Turbotronic 4 Applied Principles for System Architecture and Principles of Operation, Solar
Turbines, 2008
Aircraft Maintenance Courses
Allison 250 C20 Engine, Field Maintenance Endorsement, Northern Lights College, 2000
Bell 206 Series Airframe , Field Maintenance Endorsement, Northern Lights College, 2000
Eurocopter AS350 Series Airframe, Field Maintenance Endorsement, Northern Lights
College, 2002
Page | 3 Chris Massey
Lycoming LTS101 Turbine Engine Operating Conference, Honeywell Engines, Systems and
Services, 2003
Turbomeca Arriel I Engine, Field Maintenance Endorsement, Northern Lights College, 2002
Miscellaneous Courses
Arc Flash & Low Voltage Safety, Canada Training Group, Inc., 2009
Defensive Drivers Training (ongoing, required on a biannual basis)
Driver’s License, Classes 1 and 6, air brakes endorsement
Standard First Aid, 2014
H2S Training, 2014
Human Factors Training Seminar, Airworthiness Resources Corporation, 2004
Rigging and Safety Upgrading (Lifting and Rigging course), NAIT
Technical Writing, Rockhurst University Continuing Education Centre, Inc., 2010
REFERENCES
EVAN SCHELLER
Field Service Representative, Solar Turbines of Canada
250-566-1418
DAVE BAUER
Rotating Equipment Specialist, Shell Canada
250-263-7850
CLARK SMITH
Maintenance Lead, Paramount Resources
780-831-6918
KRISTA MOGK
Operations Accountant, Solar Turbines of Canada
780-616-5750