LF1600 SeriesHYUNDAI WIA Front Loading Turning Center

LF1600 Series Front Loading Turning Centers were developed by Hyundai WIA CORP to boast high performance and high stiffness with years of expertise and latest technology. Efficiency and maximum productivity is the philosophy behind these products.

Technical Leader

LF1600 Series

mm(in)

mm(in)

inch

mm(in)

r/min

kW(HP)

mm(in)

EA

Ø370 (14.6″)

165 (6.5″)

6″

Ø45 (1.8″)

4,500

7.5/5.5 (10/7.4)

140/165 (5.5″/6.5″)

2×10

Swing Over the Bed

Max. Turning Length

Chuck Size

Bar Capacity

Speed (rpm)

Motor (Max/Cont.)

Travel(X/Z)

No. of Tool

Twin Spindle Front Loading CNC Turning Center LF1600 Series

● High-speed gantry loader for cycle time reduction

● Minimal vibration through separable bed

● Symmetrical headstock to prevent thermal deformation

● All Axis Box Guide Way

● Highly rigidity servo turret

01 Basic FeaturesOptimized Layout and Design, Twin Spindle Front Loading CNC Turning CenterLF1600 Series

Main SpindleThe main spindle has become sturdier by enlarging its diameter and thickness. Its sturdiness and accuracy are maintained by the high-accuracy angular ball bearings that have been adopted.

TurretServo motor-powered Star 10 signed a variety of tools on each of the turret.

04

0302

Separated type of bed designThe bed and hydraulic unit of LF1600/1800 Series machines is separated by design, to reduce vibration and minimize thermal growth in the castings. Disposal of lubricant is also more easily recovered.

01

Box GuidewayThe LF1600 Series utilizes box guideways for axial movement.

Box guideways provide unsurpassed long-term rigidity and accuracy, even under the heaviest of cutting operations.

Ball ScrewThe double pretension design provides outstanding positioning and repeatabilitywith virtually no thermal growth.

The ball screw is connected directly to the servo drive motors without gears orbelts, to eliminate backlash.

Powerful Servo DrivesPowerful servo drives provide quick acceleration and improve productivity byreducing non-cutting time.

This is further enhanced by the use of box guideways, adding a measure of rigidity

◉ Rapid Travel (X/Z axis) : 24/24 m/min ◉ Travel (X/Z axis) : 140/165 mm (5.5″/6.5″)

◉ Spindle Speed : 4,500 rpm ◉ Spindle Output (Max./Cont.) : 7.5/5.5 kW (10/7.4 HP)

◉ Spindle Torque (Max./Cont.) : 64/47 N.m

Reduction of non-cutting time by fast rapid speed

04+

05

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Basic Structure

01

03

0402

◉ Convenient Coolant Tank Coolant tank is separated from the front,

is easy to maintain and repair.

02 High-Precision SpindleLong Lasting High Accuracy & Excellent PerformanceCNC Turning CenterLF1600 Series

06+

07

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Spindle Processing Flow

Spindle

Main SpindleBy enlarging the spindle’s diameter and thickness, and using only verified bearings, its rigidity is increased significantly.

This contributes to improved durability and provides a high quality surface finish on every finished part.

C-Axis ControlLF1600M/2SP features C-axis 0.001˚ controls, enabling processes that require various shapes and dimensions.

Parts requiring secondary operations are transferred from Z1 spindle to Z2 spindle via the Z1 spindle’s axis, allowing the secondary process to begin.

The same part can be machined simultaneou-sly, utilizing both the spindle of Z1 axis and Z2 axis, doubling productivity in a single machine.

Multiple families of parts can also be machined simultaneously, utilizing both the spindle of Z1 axis and Z2 axis, doubling productivity in a single machine.

0.001°

Power (kW)

64N.m (30min)120N.m (30min)

7.5kW (30min)

11kW (30min)47N.m (Cont.)81.4N.m (Cont.)

5.5kW (Cont.)7.5kW (Cont.)

Torque (N.m) Power (kW) Torque (N.m)LF1600 Series

03 Servo TurretHigh speed, High Accuracy, Highly Reliable Servo Turret LF1600 Series

Turret LF1600 Series has high performance AC servo motor attached, enhances its process reliability. Especially 3-piece coupling is attached, which makes split accuracy better. Powerful tool clamping using hydraulic minimizes tool tip deviation due to load, which displays excellent performance during heavy duty cutting.

◉ Number of Tool : 2×10 EA

◉ Tool Size (O.D) : □20 (□0.8″)

◉ Tool Size (I.D) : Ø32 (Ø1.2″)

◉ Indexing Time : 0.25 sec/step

08+

09

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

Turret

BMT turret increases tool performance and rigidity by securing each tool with 4 screws.

Overall cutting power and capability has been improved for all applications.

Mill Turret (BMT55P)

Machining Variation

Mill Tool HolderMachining capabilities have been increased with the addition of a Straight Milling Head, which can remove material from the side of the workpiece, and an Angular Milling Head, which can perform I.D. operations.

A wide variety of additional tool holders can further enhance the machines with capabilities that include drilling and tapping, among others.

Angular Milling HeadStraight Milling Head

◉ Output (Max.) : 3.7/2.2 kW (5/3 HP)

◉ Speed : 4,000 rpm

◉ Collet Size : Ø16 (Ø0.6″) (ER25)

◉ Live Tool Type : BMT55P

O.D Cutting

I.D Cutting

End Milling

Drilling

Drilling

I.D Threading

Ball-End Milling

Face Milling

Machine Monitoring

Energy SavingIntelligent Machining

Easy Programming

HW-MMS HW

-ESS

HW-DPRO T/TM

User Friendly

HW-TM

HYUNDAI WIA Smart System for CNC Turning Center

User Convenience

HW-eDNC

HW-MCG

HW-PGi F (HYUNDAI WIA Programming Guide i for Fanuc System)(Standard)

Realistic 3D solid animationProgramming simulation

Example of easy programmingEasy programming interactively

without code

Engraving CycleProgramming with only entering text by

controlling C-axis

04 Smart SystemSoftware for Smart Operating and MachiningLF1600 Series

HYUNDAI WIA Smart System

Faster processing programming and enhanced processing accuracy are possible through HYUNDAI WIA Smart System. It also maximizes productivity through equipment monitoring and environment-friendly software.

HW-GLM (HYUNDAI WIA Gantry Loader Manager)

Set the position coordinates and the loader driver support features such as easy and convenient way to provide the user operating the loader to be used to support the software

HW-DPRO T/TMHYUNDAI WIA Dialogue PROgram Turn/TurnMill

Using a dialogue method, this software makes it easy to work out a program for a lathe processing operation with complicated configurations. (Can be installed on a PC.)

HW-MMSHYUNDAI WIA Machine Monitoring System

This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis.

HW-TMHYUNDAI WIA Tool Monitoring

This is an equipment-monitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation.

HW-ESSHYUNDAI WIAEnergy Saving System

This is an environment-friendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation.

HW-eDNCHYUNDAI WIA ethernet Direct Numerical Control

This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory.

HW-MCGHYUNDAI WIAMachine Guidance

NC loading type software offering user-convenience functions like operating equipment, maintenance and monitoring of managing equipment

10+

11

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

05 Automation SystemVarious Devices for User Friendly

LF1600 Series

◉ Gantry Loader Work Size : Ø120 x 80 mm (Ø4.7″ x 3.1″)

◉ Gantry Speed (X/Y/Z) : 150/110/60 m/min

◉ Gantry Loader Work Weight : 3 kg (6.6 lb) x 2 ea

◉ No. of Pallets : 14 Pallets with 3 Bars

◉ Pallet Speed : 1.7 m/min (8 sec / 1 pitch)

◉ Lift Speed (Up-Down) : 3 m/min

Gantry Loader

Work Feeder

완재품 적재 2nd Machining

Construction of high speed gantry loaders is possible as well as the construction of flexible automation cells by a work stocker. Optimization of the installation space is also possible. In particular, excellent machining effect is achieved during continuous machining of both sides of the same or different work

Gantry Loader Machining Process

원소재 투입 1st MachiningUnloading & Loading

Unloading & Loading

Turn Over

SPECiFiCATiONS

Standard & Optional

Main SpindleHollow Chuck 3 JawMain SpindleSolid Chuck 3 JawStandard Soft Jaw (1set)Chuck Clamp Foot Switch2 Steps Hyd, Pressure Device2 Steps Foot SwitchSpindle Inside StopperChuck Open/Close Confirmation DeviceMain Spindle 5° IndexC-Axis (0.001°)TurretTurretMill TurretStraight Mill Holder (Radial)Angular Mill Holder (Axial)Straight Mill Holder (Radial)Angular Mill Holder (Axial)Boring SleeveDrill SocketU-Drill HolderU-Drill Holder SleeveO.D Extension HolderSwivel HeadTail Stock & Steady RestQuill Type Tail StockTail Stock Foot SwitchStandard Live CenterHigh Precesion Live Center2 Steps Tail Stock Pressure SystemCoolant & Air BlowStandard Coolant (Nozzle)Chuck Coolant (Upper Chuck)Gun CoolantSpindle Thru Coolant (Only Hollow Cylinder & Special Chuck)Thru Coolant for Live ToolChuck Air Blow (Upper Chuck)Tail Stock Air Blow (Upper Tail Stock)Turret Air BlowAir GunSpindle Thru Air Blow(Only Hollow Cylinder & Special Chuck)

High Pressure Coolant

Power Coolant System (For Automation)Coolant ChillerChip DisposalCoolant TankChip Conveyor(Hinge/Scraper)Special Chip Conveyor (Drum Filter)

Chip Wagon

Safety DeviceDoor Inter-LockTotal Splash GuardQuill Forward/Reverse Confirmation DeviceChuck Pressure Failure DetectorBack Spin Torque Limiter (BST)Torque Limiter

8″10″8″10″

RadialCollet Type,2eaCollet Type,2eaAdapter TypeAdapter Type

For Out-Dia

6 Bar20 Bar

220ℓRear(Rear)Side(Side)

Standard(180ℓ)Swing(200ℓ)Swing Large Size(290ℓ)Large Size(330ℓ)Costomized

Spindle Electric Device

● : Standard ○ : Option ☆ : Prior Consultation - Non Application

LF1600/2SP LF1600M/2SP ○ ○ ☆ ☆ ● ● ☆ ☆ ● ● ● ● ○ ○ ○ ○ ☆ ☆ ● ● ☆ ☆ - ● ● ● - ● - ● - ● - ○ - ○ ● ● ● ● ○ ○ ○ ○ ☆ ☆ - ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ○ ○ ☆ ☆ - ○ ○ ○ ☆ ☆ ☆ ☆ ○ ○

☆ ☆ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ● ● ● ● ☆ ☆ ● ● ● ● ☆ ☆

LF1600/2SP LF1600M/2SP ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - - ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● ● ☆ ☆ ○ ○ - - ○ ○ ☆ ☆ ○ ○ - - ☆ ☆ ☆ ☆ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ☆ ☆ - - - - ○ ○ ☆ ☆ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ● ● ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ● ● ☆ ☆ ☆ ☆

Call LightCall LightCall Light & BuzzerElectric Cabinet LightRemote MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter

Multi Tool Counter

Electric Circuit BreakerABS EncoderAVR (Auto Voltage Regulator)

Transformer

Auto Power OffDouble Foot SwitchMeasurementQ-SetterAutomatic Q-SetterWork CloseConfirmation DeviceWork Setter

Linear Scale

Coolant Level Sensor (Only for Chip Conveyor)Measuring SystemEnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation

Auto Door

Auto Shutter (Only for Automatic System)Sub Operation PannelBar Feeder InterfaceBar Feeder (FEDEK)Extra M-Code 4eaAutomation Interface

I/O Extension (IN & OUT)

Turret Work Pusher (For Automation)GANTRY Automation SystemTurn Over DeviceIn Stocker (Rotary)OUT Stocker (Rotary)NG ChuteHyd. DeviceStandard Hyd. CylinderStandard Hyd. UnitS/WMachine Guidance (HW-MCG : FANUC)Tool Monitoring (HW-TM : FANUC)DNC Software (HW-eDNC : FANUC)Interactive ProgramEnergy Saving System (HW-ESS : FANUC)Machine Monitoring System (HW-MMS : FANUC)Load Master (HW-GLM : FANUC)ETCTool BoxCustomized ColorCAD & CAM

1 Color : ■3 Color : ■■■3 Color : ■■■B

LED TypeLED TypeDigitalDigitalDigital6ea9ea

30kVA35kVA

Removable Type

TACOSMC

X AxisZ Axis

For Automation

StandardHigh Speed

16Contact32Contact

8/10/12/14 Pos8/10/12/14 Pos

Solid35bar/15ℓ

Need Munsel No.

The specifications as above will only serve as a reference.

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

12+

13

unit : mm(in)External Dimensions

SPECiFiCATiONS

RearChip Conveyor

1900 (74.8)

3814 (150.1)

1936 (76.2)

2782

(109

.5)

1200

(47.

2)

3054 (120.2)

unit : mm(in)Tooling System

14+

15

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

O.D Holder

I.D Holder

Facing Holder

O.D Holder

I.D Holder

Facing Holder

Straight MillHolder

Angular MillHolder

SPECiFiCATiONS

Right/Left

Single

Tool Holder

Standard

Standard

Ø8 (5/16″)

Ø10 (3/8″)

Ø12 (1/2″)

Ø16 (5/8″)

Ø20 (3/4″)

Ø25 (1″)

MT 1 × MT 2

MT 2

O.D Holder

Facing Holder

I.D Holder

U-Drill Tool Holder

Stright Mill Holder

Angular Mill Holder

Boring

Drill

ER Collet

Turning Holder

Driven Holder

Boring Holder

Socket

iTEM LF1600/2SP LF1600M/2SP

8 6

2 2

10 8

- Opt

- 2

- 2

2 2

2 2

2 2

2 2

2 2

2 2

2 2

2 2

- 2 Set

Tooling Parts Detail

Specifications are subject to change for improvement without notice.

LF1600/2SP

10 StationBMT 55P

10 Station

LF1600M/2SP

unit : mm(in)interference

360 (14.2)

135 (5.3) 135 (5.3) 65(2.5)

30(1.2)

130 (5.1)

140 (5.5)(X1 STROKE)

140 (5.5)(X STROKE)

95(3.7)

270(10.6)

10(0.4)

95 (3.7)

95 (3.7)

95 (3

.7)

95 (3

.7)

ø188

(ø7.4)

ø188(ø7.4)

ø180(ø7.1) ø186

(ø7.3)

ø193

(ø7.6) ø186

(ø7.3)

ø530

(ø20.8)

360 (14.2)

135 (5.3) 135 (5.3) 65(2.5)

100(3.9)

30(1.2)

130 (5.1)

95(3.7)

270(10.6)

10 (0.4)

ø530

(ø20.8)

ø260

(ø10.2)

ø165(ø6.5)

ø260

(ø10.2)

ø165(6.5)

ø165

(ø6.5)

ø165

(ø6.5

)

LF1600/2SP

LF1600M/2SP

SPECiFiCATiONS

unit : mm(in)Tooling Travel Range

I.D TOOLHOLDER

O.D TOOLHOLDER

ANGULAR MILLHOLDER

STRAIGHT MILLHOLDER

I.D TOOLHOLDER

O.D TOOLHOLDER95 (3.7)

360 (14.2)360 (14.2)

140 (5.5)(X STROKE)

15(0.6)

100(3.9)

Ø165 (Ø6.5)

370 (14.5)

40(1.6)

84(3.3)

34(1.3)

140 (5.5)

165 (6.5)

(Z STROKE)

125 (4.9)125 (4.9)

95 (3.7)

165 (6.5)

(Z STROKE)

10(0.4)

130 (5.1)

11(0.4)

22 (0.8)

120 (4.7)

135 (5.3)135(5.3)

Ø165 (Ø6.5)

340 (13.4)

115 (4.5)

214 (8.4)

65(2.6)

30(1.2)

(X STROKE)(X STROKE)

40(1.6)

84(3.3)

164 (6.5)

(Z STROKE)

119 (4.7)

(Z STROKE)46(1.8)

135 (5.3)

84 (3.3)

34 (1.3)

45(1.7)

Ø32(Ø1.3)

34(1.3)

1

95 (3.7)

360 (14.2)360 (14.2)

15(0.6)

100 (3.9)

Ø165 (Ø6.5)

370 (14.5)

165 (6.5)

165 (6.5)

125 (4.9)125 (4.9)

10(0.4)

130 (5.1) 120 (4.7)

140 (5.5) 135 (5.3)140 (5.5)135 (5.3)

Ø165 (Ø6.5)

65(2.6)

80 (3.1)

70(2.7)

70(2.7)

72 (2.8)

Ø165 (Ø6.5)

95 (3.7)

73 (2.8)

(X STROKE)

165 (6.5)

(Z STROKE)

40(1.6)

84(3.3)

21(0.8)

10(0.4)

130 (5.1)120 (4.7)

139.5 (5.5)

5(0.2)

140(5.5)

105(4.1)

34(1.3)

21.5

(0.8)

Ø165 (Ø6.5)

139(5.5)

84(3.3)

40(1.6)

140 (5.5)

360 (14.2)360 (14.2) 370 (14.5)

135 (5.3)135 (5.3)

140 (5.5)(X STROKE)

165 (6.5)

(Z STROKE)

(X STROKE)

140 (5.5)

LF1600/2SP

LF1600M/2SP

16+

17

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

SPECiFiCATiONS

Specifications are subject to change for improvement without notice.

Swing Over the Bed

Max. Turning Dia.

Max. Turning Length

Bar Capacity

Chuck Size

Spindle Bore

Spindle Speed (rpm)

Motor (Max/Cont.)

Torque (Max/Cont.)

Spindle Type

Spindle Nose

C-axis Indexing

Travel (X/Z/B)

Rapid Travel (X/Z/B)

Slide Type

No. of Tool

Tool Size OD

ID

Indexing Time

Motor (Max/Cont.)

Milling Tool Speed (rpm)

Touque (Max/Cont.)

Collet Size

Type

Coolant Tank

Lubricating Tank

Electric Power Supply

Thickness of Power Cable

Voltage

Floor Space (L×W)

Height

Weight

Controller

CAPACITY

FEED

TANkCAPACITY

SPINDlE

TURRET

lIvE TOOl

MACHINE

NC

POWERSUPPlY

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

mm(in)

r/min

kW(HP)

N.m(lbf.ft)

-

-

deg

mm(in)

m/min

-

EA

mm(in)

mm(in)

sec/step

kW(HP)

r/min

N.m(lbf.ft)

mm(in)

-

ℓ(gal)

ℓ(gal)

kVA

Sq

V/Hz

mm(in)

mm(in)

kg(lb)

-

iTEM LF1600M/2SPLF1600/2SP

Ø370 (14.6″)

Ø260 (10.2″)

165 (6.5″)

Ø45 (1.77″)

ø165 (6.5″)

ø53 (2.1″)

4,500

7.5/5.5 (10/7.4)

64/47 (47.2/34.6)

BELT

A2-5

- 0.001˚

140/165 (5.5″/6.5″)

24/24

BOX GUIDE

2×10

□20 (0.8″)

ø32 (1.3″)

0.25

- 3.7/2.2 (5/3)

- 4,000

- 26.2/14 (19.3/0.3)

- Ø16 (0.6″) ER25

- BMT55P

220 (58.1)

4 (1)

25

Over 25

220/60 (200/50)

1,900×1,936 (74.8″×76.2″)

2,210 (87″)

4,500 (9,921)

FANUC 31i-A

Specifications [ ] : Option

SPECiFiCATiONS

FANUC 31i-AAxis control / Display unit

Controlled Axis

Simultaneous controllable Axis

Least input increment

Least command increment

High speed HRV controlInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo-offBacklash compensationPosition switchUnexpected disturbance torque detectionHigh resolution transfer control (HRM)LCD / MDIOperation Automatic operation (memory)MDI operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockFeed functionsManual jog feedManual handle feedrateFeed commandFeedrate overrideJog overrideRapid traverse overrideOverride cancelFeed per minute / rotationProgram input & interpolation functionsNano interpolationDwellThread retractVariable lead threading1st reference point returnReference point return check2nd reference point returnProgram stop / EndTape codeOptional block skipMaximum programmable dimensionsProgram numberAbsolute and incremental programmingDecimal point inputPlane selectionWork coordinate system selectionManual absoluteDirect drawing dimension programmingG code systemProgrammable data inputSub program callCustom macro BAddition of custom macro common variableMultiple repetitive cyclesMultiple repetitive cycles ⅡCanned cycles for turning

Max. 6 Axis are availableX, Z axisX, Z, C axis (M type machine)X, Z, B, C, A axis (MS type machine)X, Z, Y, B, C, A axis (SY type machine)2axeis / Linear and circular (Max. 4Axis)X, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 degX, Z, Y, B axis : 0.001 mm (0.0001”)C axis : 0.001 deg

G20 / G21Each axis / All axisAll axis

Over-travel

+/- 0~9999 pulses(Rapid traverse & cutting feed)

Back-spin torque limiter (BST)

10.4″ Color LCD

Sequence, program

Dry run., program check

Rapid, jog, handlex1, x10, x100F code feedrate direct command0~200 % (10% units)0~2,000 mm/min[79 ipm]F1, F5, F25/F50, F100%

Positioning/Linear/Circular (G00/G01/G02, G03)G04, 0~9999.9999 sec

G28, manualG27G30M00, M01 / M02, M30EIA / ISO 1 ea+/- 9999.9999″O+4 digits

G17, G18, G19G52 to G59“ON” fixed

Included chamfering / Corner R`AG1010 Step

#100 to #199, #500 to #999

Sub / Main spindle functionM-Code functionM-Code function lockLock sp. speed commandMain sp. constant controlSpindle speed overrideSpindle position decisionRigid tappingTool function / Tool compensationTool functionTool offset pairsTool offsetTool nose radius compensationDirect input of measured toolcompensation value BTool life managementData in/output & editing functionsInput/Output interfaceMemory card input/outputEmbeded ethernetPart program storage lengthNumber of registrable programs expansionMemory lockBackground editingExtended part program editionDisplay, diagnosis & setting functionsSelf-diagnosis functionHistory displayHelp functionExternal messageRun hour / Parts count displayDisplay of actual spindle speed and T codeActual cutting feedrate displayOperating monitor screenGraphic displaySpindle / Servo setting screenSelection of 5 optional languageLCD screen saveAutomatic data backupFunctions according to machine specificationCs contouring controlStored pitch error compensationPolar coordinate interpolationCylindrical interpolationCanned cycles for drillingspindle orientation expansion

OptionHigh speed ethernetOptional block skip3rd & 4th reference point returnG code systemPart program storage lengthTool OffestPoligon TurningHelical interpolationDynamic graphic displayProtection of data at 8 levelsManual guide iTool Monitoring function

Figures in inch are converted from metric values.Design and specifications subject to change without notice.

M4 digits

S4 digits, binary outputG96, G9750% to 150% (10% units)

T2 + 264 pairs

G40, G41, G42

RS232C

100Mbps256 KbyteMax. 500 programs

Copy, move, change of NC program

Alarm & operation display

Rod meter light

Screen saver

Turn millTurn millTurn millTurn millTurn millTurn mill, Sub spindle

100 Mbps (Option board is required)9 ea

B / C512 Kbyte / 1024 Kbyte99 / 200 / 400 EA

Interactive programHWTM (Built-in Fanuc type)

18+

19

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

CONTROLLER

GLOBAL NETWORk

20+

21

LF

1600

Ser

ieS

Fron

t Loa

ding

Tur

ning

Cen

ter

HYU

ND

AI W

IAM

ACH

INE

TOO

L

HYUNDAI WIA America 265, Spring Lake Drive, Itasca, IL, 60143TEL : +1 201 489 2887 FAX : +1 201 489 2723

L.A Office11155 Knott Ave, STE B/C, Cypress, CA 90630, U.S.A TEL : +1 714 373 5480FAX : +1 714 373 5485

America Technical Center39205 Country Club Drive Suite C-9, Farmington Hills, MI 48310TEL : +1 248 324 1056FAX : +1 248 324 0989

HYUNDAI-KIA EUROPE GmbH Kaiserleipromenade 5, D-63067 Offenbach, Germany TEL : +49 69271 472 701FAX : +49 69271 472 719

Raunheim Service CenterFrankfurter Str. 63, 65479 Raunheim, GermanyTEL : +49 6142 9256 111 FAX : +49 6142 9256 100

JIANGSU HYUNDAI WIACompany No.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, ChinaTEL : +86 512 5672 6808FAX : +86 512 5671 6960

SHANDONG HYUNDAI WIACompany No.188 Shanghai Road, Rizhao City, Shandong Province, ChinaTEL : +86 633 229 9031/5910FAX : +86 633 229 9191/9199

CHINA Sales Company1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233 TEL : +86 21 6427 9885FAX : +86 21 3431 0376

CHINA Beiging OfficeRoom 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853

CHINA Guangzhou OfficeRoom 609, No.1 Yingbin Building 1# Yingbin Blvd (Dashi Section) Panyu District Guangzhou Ctiy, Guangdong, China 511431 TEL : +86 20 8550 6595~6, FAX : +86 20 8550 6597

CHINA Chengdu OfficeRoom 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, ChinaTEL : +86 28 8665 5550FAX : +86 28 8666 2985

CHINA Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, ChinaTEL : +86 27 5956 3256~7FAX : +86 27 5952 3258

CHINA Qingdao OfficeRoom 1207, ZhaoYin Building, 36 HongKong Middle Road, Qingdao 266071, PR China TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338

CHINA SHENYANG OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013 TEL : +86 24 3228 6640FAX : +86 24 3228 6642

HYUNDAI WIA INDIA48, Sur. No78-08. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamilnadu-602 105, India TEL : +91 44 3717 6333FAX : +91 44 3717 6363

Changwon Office153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 642-110)TEL : +82 55 280 9114 FAX : +82 55 282 9680

Uiwang Office37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 437-718)TEL : +82 31 596 8209 Fax : +82 55 210 9804

HEAD OFFICE & FACTORY

OVERSEAS OFFICES

2014-09 002.002 ENG

Head Office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do

Tel +82 55 280 9206, 9299 Fax +82 55 210 9804

www.wiamachine.co.kr

Overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do

Tel +82 31 593 8173