cellar tech well cellar presentation

8/10/2019 Cellar Tech Well Cellar Presentation

1/35

Sealed Well Cellars are protected by US patent 7637692, 7987904, 8127837, and 8256505.

Additional US patents pending.

Cellar Tech Containment Well Cellar Systems www.CellarTech.com


2/35

Basic Containment Well Cellar

Sealed Well Cellars are protected by US patent 7637692, 7987904, 8127837, and 8256505. Additional US

patents pending.



3/35

Why Buy a Cellar Tech Containment Well

Cellar?

Environmentalanything that ends up in the cellar is contained and there is no soil or groundwater exposure. If used with a drip liner under the rig, the operation can be zero discharge.

Economicsthe prefabricated well cellar is usually cost neutral at worst. Upfront cost is higherthan a section of culvert pipeno doubt. But after totaling up the cost of pumping and hauling,rig fabricated cellar covers, and lower worker productivity working around the old cellars, mostoperators have reported that the prefabricated cellars are no more expensive than what they

were doingan a whole lot better to work around.

Safetythe cellars are typically provided with OSHA compliant, slip resistant, work surfacesmanufactured to fit. Confined space entry requirements can also be reduced or eliminated.They make the cellar significantly safer during drilling, completion, and production operations.

Featuresuntil now, the well cellar has never been considered a part of the facility...it hasalways been an afterthought. Optional features can include integral piping, sumps, well house

mounting lugs, control line or conduit penetrations, drilling riser quick connects, load bearingbase plates and more

Regulatoryawareness is increasing. At least 1 state recently amended their regulations torequire a sealed well cellar. Others have legislation pending. There is also some EPA attentionto this issue. It is likely that sealed cellars will become a requirement at some point soon.

Sealed Well Cellars are protected by US patent 7637692, 7987904, 8127837, and 8256505. Additional US

patents pending.



4/35

Conventional Cellar Pictures


5/35

Conventional Cellar Pictures


6/35

Round Containment Well Cellar

Patent Pending Integral 50,000 lb. Structural

Base Plate

Integral Sump

Patent Pending Surface Run-Off Extension

Ring

Sacrificial Anode

Movable Ladder

Polyurethane Paint


7/35

Octagonal Reusable Containment Well

Cellar c/w Handrails and Sump Patent Pending Mid-Level Bar Grate Ledge

Patent Pending Weld Riser

Integral Sump and Piping

Hot Dip Galvanizing


8/35

Square Containment Well Cellar

Patent Pending Mid-Level Bar Grate Ledge

Hot Dip Galvanizing

Scalloped OSHA Toe Kick for Valve Handle

Clearance

Patent Pending Structural Base Plate


9/35

Square Containment Well Cellar

Patent Pending Mid-Level Bar Grate Ledge

Patent Pending Weld Riser

Integral Sump

Red Oxide Primer and Sacrificial Anode


10/35

Marcellus Containment Well Cellar

Cellar Tech Containment Well Cellar Systems

www.CellarTech.comDistributed by: Cellar Tech LLC (Lower 48 States) and Marsh Creek, LLC (Alaska)

Perfect for Pad Drilling or Shale Development

Openings for Production Piping

Hot Dip Galvanized

OSHA Toe Kick


11/35

Marcellus Containment Well CellarsC/W Structural Cover Plates Suitable for Truck Traffic


www.CellarTech.comDistributed by: R&H Supply (Lower 48 States) and Marsh Creek, LLC (Alaska)


12/35

Tapered Disposable Containment Well Cellar

Patented Shear Out Wallsfor Easy Recovery After

Well Abandonment




13/35

Tapered Disposable Containment Well Cellar


14/35

Heavy Duty Base Plate Containment Cellar

Patent Pending Integral 200,000 lb.

Structural Base Plate

High Quality Materials, Manufacture,

and Inspection




15/35

Heavy Duty Base Plate Containment Cellar

60 mil SPC 3888 Plural Component Coating

Integral Grout Tubes

Proprietary Anti-Skid Bar Grate Coating

OSHA Toe Kick




16/35

Double Wall Insulated Containment Cellar

Double Wall c/w Poured Urethane Insulation

OSHA Toe Kick

Zinc Metalizing Under Polyurea Coating




17/35

Cellars with Drip Liner Attachment Ring

Newno more bolts. Liner

Attachment Rings use

Proprietary Clips for Easy

Installation




18/35

Planning and Engineering

I collect some basic rig, well head, drilling, completion, andproduction information.

I then prepare a layout for review by the customer.

If there are no changes, I prepare a cost estimate and delivery. Ifengineering is requested by the customer, I prepare it at this time.




19/35

Manufacturing and Design Quality

Cellar Tech only manufactures high quality products.

We have been twice nominated for an American Galvanizers

Association award for design excellence.

We have never delivered an order even 1 day late.

Our customer feedback is overwhelmingly good.

Our steel fabrication is to a very high standard.




20/35


21/35

Typical Layout




22/35

Typical Well Head Installation

Mid LevelBar Grate

Well Head Completely

Below Grade Allowing

for Unrestricted Rig

Access

Annulus Valves

Aligned with Wall

Openings for

Piping




23/35

Cellar Tech Containment Well

Cellars Contribute to Uniform and

Consistent Well Installations

Structural Cover

Plates Installed

over Undrilled

Slots Provide

Unrestricted Rig

Access and

Improved Safety

All Wellheads at

Same Elevation and

Orientation




24/35

Cellar Tech Optional Features

Load Bearing Base Plates Custom Sizes

Liner Attachment Ring

Additional / Multiple Bar Grate Levels

Load Bearing Cover Plates to Cover Cellar

Integral Sump

Sump or Other Piping

Fluid Level Controllers

Wall Openings, Flanged or Otherwise Specialty Coatings

Run Off Extension Ring

Double Walls w/ Poured Urethane Insulation

Ladders

PE Certification

Anti Buoyancy Port

Well Houses c/w Class 1 Div 1 Compliant Wiring

Sacrificial Anodesfixed or replaceable

Installation Boxes (Ditch Boxes)

Mouse Hole Penetrations.

Custom Rubber Products




25/35

Slip-On-Weld

Containment Well Cellar

Installation




26/35

Excavate Around The Conductor Pipe




27/35

Prep The Bottom Of The Excavation And Pipe




28/35

Slip Cellar Over Conductor Pipe


Distributed by: Cellar Tech LLC (Lower 48 States) and Marsh Creek, LLC (Alaska)


29/35

Check For Level And Adjust As Necessary




30/35

Weld Riser to Conductor




31/35

Backfill And Compact




32/35

Prepare Final Grade




33/35

Assembly Line Installation




34/35

Optional Features

Load Bearing Base Plates

Custom Sizes

Liner Attachment Ring

Additional / Multiple Bar Grate Levels

Load Bearing Cover Plates to Cover Cellar

Integral Sump

Sump or Other Piping

Fluid Level Controllers

Wall Openings, Flanged or Otherwise Specialty Coatings

Run Off Extension Ring

Double Walls w/ Poured Urethane Insulation

Ladders

PE Certification

Anti Buoyancy Port

Well Houses c/w Class 1 Div 1 Compliant Wiring

Sacrificial Anodesfixed or replaceable

Installation Boxes (Ditch Boxes)

Mouse Hole Penetrations.

Custom Rubber Products




35/35

Distributed by:

Cellar Tech LLC (Lower 48 States)

www.CellarTech.com

[email protected]

724-519-2139

Marsh Creek, LLC (Alaska)

Mr. Randy Eledge

[email protected]

907-343-0367

www.MarshCreekLLC.com
http://www.cellartech.com/mailto:[email protected]://www.marshcreekllc.com/http://www.marshcreekllc.com/mailto:[email protected]://www.cellartech.com/

cellar tech well cellar presentation

Documents