Ahmed Tarek Wafik

30 Montrose Ave. Apt 19T, Brooklyn, New York 11206 USA Phone: +1 (917) 742-6225 E-mail: atw.biodesign@gmail.com Skype: atw-atw

I have a Permanent Residency Card and can legally work in the U.S.

Page 1 of 3

EDUCATION

Certified Program - Advanced Autodesk Revit & Green Building/Env. Safety Present The Cooper Union, New York City, United States of America

Master of Science in Architectural Engineering - Urban Design & Community Develp. September 2013 Cairo University, Faculty of Engineering, Giza, Egypt

Bachelor of Science in Architectural Engineering June 2007 Misr University for Science & Technology, Giza, Egypt

Study Abroad – Architecture Physical Modeling Training April 2007 Stuttgart University, Stuttgart, Germany

PROFESSIONAL EXPERIENCE AMRARCH Design Studio, New Jersey, USA January 2015 – Present Architectural Associate/Project Manager

- Full involvement in all aspects of a project from concept planning through construction documents (New construction-Renovation-Addition). Worked on more than 100 projects (Residential-Commercial-Mixed Use- Educational-Healthcare-Institutional).

- Project management, client interface, design coordination with consultants, and contractors. Specification and sourcing out materials. Develop presentations and marketing materials.

- Reviewing code standards and ADA compliance. - Attending township municipal meetings, revising and following up with code officials over

submitted projects. Site visits, and following up with construction progress. - Survey of existing structures & preparation of existing condition drawings.

Eco-Plan Consulting, Giza, Egypt March 2012 – June 2014 Urban Designer

Member of planning & design team, responsible of surveying, analysis, and design development. Participated in the following projects:

- Preparation of the full master plan of a new town (population 75,000) east of Sohag city, Egypt. The project covered total area of 4300 acres.

- Preparation of detailed planning & urban design of the downtown area of Sekkaka City, AlGouf region, Kingdom of Saudi Arabia.

Dar Al-Handasah - Shair and Partners, Giza, Egypt January 2008 – February 2012 Project Architect

Working on high end residential, commercial, retail, healthcare, hospitality projects, and prestigious urban developments. Member of a design & production team, working on conceptual design, design development, construction documents, marketing materials, and establishing and reviewing design standards.

Shamiya Extension for Makka Haram - Kingdom of Saudi Arabia.

- Worked on the design development and construction drawings of the external skin of the main extension building for the Mekka Haram, and I was the team leader for the north skin. The building is 6 levels of praying areas, services and circulation corridors and vestibules.

Princess Nora University - Kingdom of Saudi Arabia.

- Worked on designing the buildings & infrastructure utilities related to an educational complex with a total built-up area of 2.8 million m2, including 8 academic collages, 6 health sciences collages, 2 medical research laboratories, 600-bed hospital (107,000 m2), central library,

Ahmed Tarek Wafik

30 Montrose Ave. Apt 19T, Brooklyn, New York 11206 USA Phone: +1 (917) 742-6225 E-mail: atw.biodesign@gmail.com Skype: atw-atw

I have a Permanent Residency Card and can legally work in the U.S.

Page 2 of 3

administration building, ceremonial piazza, housing units for 11,000 single students, 400 villas for senior staff housing, 1,400 apartments for junior staff housing, sports facilities, mosques and central utility plants. The project comprises several LEED-certified buildings of which three LEED Gold in addition to many modern techniques for energy conservation and renewable energy.

Residential Towers at Viva Bahariya, The Pearl - Qatar.

- Project architect and lead coordinator for three residential towers. Worked on the concept design, design development and final construction documents, including the preparation of marketing materials for two 21-storey towers (VB26 and VB27) of 53,457 m2 in built-up areas, and one 19-storey tower (VB28) of 49,734 m2 in built-up area, including basements for car-parking; a typical floor plate in the 3 towers accommodating studios (60 m2), and one-bedroom (110 m2), two-bedroom (136 m2) and three-bedroom (160 m2) apartments; public facilities and amenities; etc.

Giardino Villas, The Pearl - Qatar.

- Participated in the preparation of tender documents for a high end prestigious residential compound on a site area of 238,500 m2, comprising 83 double-storey villas of 412 m2, 165 double-storey villas of 448 m2 each, 20 double-storey villas of 530 m2 each, one 2-storey clubhouse with a built-up area of 5,360 m2, 3 entrance gates, extensive landscaping works, electrical substations, and all infrastructure utility networks (roads, water supply, irrigation, drainage, sewerage, telecommunications, etc.)

Hajj Terminal Load Center - Kingdom of Saudi Arabia.

- Participated in the design for the East Hajj Terminal. The terminal Area is a 2-level symmetrical oval building with an overhead 5-module tents structure, housing check-in halls, baggage claim zones, offices, duty free area and boarding lounges connected to the aircraft stands by loading bridge (total built-up area of the terminal facility: 108,036 m2). The Plaza area connects the bus parking facilities to the terminal (area: 136,100 m2). Apron 6 includes 19 aircraft stands with all related Ground Service Equipment (GSE), roads and taxiways.

Associated Consultants, Cairo, Egypt September 2007 – November 2007 Architectural Designer

- Responsibilities included design development and construction documents for architecture and interior projects. Construction supervision, coordination with structure and mechanical consultants, reviewing contractor’s drawings, and sourcing materials.

PRESENTATION/TEACHING EXPERIENCE

Dar al-handasah (Shair & Partners), Egypt September 2014 Regional office of the United Nation Development Programme UNDP, Egypt American International School in Egypt (AIS)

- Presentation about the electromagnetic phenomena in urban spaces (Artificial & Natural), and their impact on human health, an introduction about the science of BioGeometry, and how to utilize it in urban design and architecture to reshape environmental energy qualities.

BioGeometry Conference, North Carolina, USA November 2013

- Presentation about my recent research & studies in regards to electromagnetic pollution and the application of the science of BioGeometry in Urban Design. YouTube Link: http://www.youtube.com/watch?v=SAbLkjzyXgY

Ahmed Tarek Wafik

30 Montrose Ave. Apt 19T, Brooklyn, New York 11206 USA Phone: +1 (917) 742-6225 E-mail: atw.biodesign@gmail.com Skype: atw-atw

I have a Permanent Residency Card and can legally work in the U.S.

Page 3 of 3

October High Institute for Engineering & Technology, Egypt September 2007 – November 2007 Teaching Assistant

- Assisted in teaching Architectural Drawing and Design II.

- Assisted in teaching Engineering Graphics I.

PUBLICATIONS Centerpoint Now Magazine, New York, USA December 2013

Wafik, A, T., 2013, BioGeometry: The science that should shape our world, Centerpoint Now, Issue 25, December 2013, pp.112-113. https://wcpun.files.wordpress.com/2011/10/centerpoint-now-sustainability_low.pdf http://www.academia.edu/6253865/BioGeometry_The_science_that_should_shape_our_World

- WCPUN (World Council of Peoples for the United Nation) publication that highlights issues on the agenda of the international community, and diverse with the UN's values and objectives. The 2013 issue theme is "Sustainable Development", on individuals, social levels, policy makers, innovators across disciplines and cultures.

REGISTRATION & ADDITIONAL EXPERIENCE June 2015-Present National Council of Architectural Registration Boards (NCARB) New York, U.S. January 2008-Present Engineers Syndicate of Egypt – Architecture Licensure 3430/23 Cairo, Egypt January 2012 Training, Attended and completed the BioGeometry Foundation Training. Cairo, Egypt July 2007 Training, Attended an architecture design training at Misr Consulting Engineers. Cairo, Egypt

SKILLS Software: Autodesk AutoCAD, SketchUp, Adobe Photoshop, Microsoft Office, PC and Mac operating systems. Languages: Fluent English and Arabic