arta 3.7m antenna
DESCRIPTION
Technical Specification of ARTA AntennaTRANSCRIPT
-
Figure 1 Dimensions
Home About Arta Products Suppliers Contact News Espaol
Mechanical Data 3.7 m SP, SXP antennas.
Material and treatmentThe antenna has an aluminium parabolic reflector. The reflector is spray painted. Standard colour is grey
RAL7038. The mount is made of hot dip galvanised steel. All screws, nuts and washers are made of stainless
steel A4 or hot dip galvanised steel class 8.8. Depending on frequency band the feed is made of brass or hot
dip brazed aluminium.
The antenna is delivered with two support stays for installation at the rim of the reflector. For
additional security and stability one additional optional support stay may be connected.
Further information is given in the installation manual.
Weight and dimensionsDimensions in mm according to figure 1.
Interface115 mm column with a minimum length of 1515 mm.
Alignment
Coarse Azimuth + 50o (depends on column installation)
Fine: Both planes +5o
Arta http://www.arta.no/index.cfm?id=94576
1 of 2 2/3/2010 3:49 PM
-
Arta http://www.arta.no/index.cfm?id=94576
2 of 2 2/3/2010 3:49 PM