This kit �st most TVs 32 in. - 70 in. (81.28 cm - 177.8 cm), up to 132 (60 kg)

4F

2

M8X16

M6X12

M5X12

M4X12

M8X40

M6X35

M5X30

M4X30

4

4

4

4

4

4

4

4

M4/M5 washer

M6/M8 washer

M8/M6 spacer

M4/M5 spacer

4

4

4

4

MM

MM

MM

MM

MM

MM

MM

MM

G

H

I

J

K

L

M

N

O

P

Q

R

TV Wall Mount

Parts List

Hardware List

Part #

# traP# traP

Part #

metImetI

ItemItem

.ytQ.ytQ

Qty.

3

TV Wall Mount

Safety Glasses

Lag Bolt DrillBit 7/32 in or 5.5 mm

Drill

Hammer

PhilipsScrewdriver

14 mm Wrench(or 14 mm socket wrench)

Stud Finder

Tools Needed (not included)

7/32”or 5.5 mm

4

2. Never let children climb on product or play with product.

3. Do not sit or stand on product.

4. Do not fasten a TV that is heavier than the recommended load rating to the mount.

1. Improper installation may cause property damage and or personal injury, so the installation must be done by two quali�ed contractors. The manufacturer is not liable for damage or injury cause by incorrect mounting, assembly or use.

5. The size and weight of your TV must not exceed 31.5in. - 70 in. diagonally or 132 lbs. The wall must be capable of supporting �ve times the weight of TV plus mount.

6. The mount allows the TV to tilt -20°, Maximum extension: 23.6in/600mm, Minimum extension: 2.95in./75mm.

7. Improper handling can result in cuts and lacerations.

8. Pictures for reference only, subject to our available products.

TV Wall Mount

1. This TV mount is designed for use on a vertical wall that is constructed with wood studs.2. Become familiar with the instructions and all parts.

3. Make sure that all parts are in the box and in good condition.

4. Assemble the product on the open �at carton or a rug to protect the product and your �oor.

5. Some heavy products need a second person to assist in the assembly. Do not install on sloping surface.

Assembly Tips:

5

TV Wall Mount

Step 1 Attaching Wall Plate (A)

Using a stud finder, locate center of wood studs in your wall, then hold wall plate (A) against wall at your desired location. Next, use a pen or pencil to mark the location of wherethe 4 mounting screws (E) will go into wall. Before marking, ensure that wall plate is level using bubble level (already attached to mount.)

Pre-drill the marked 4 holes using 7/32in. (5.5mm) drill bit. Using a 14mm wrench, fasten wallplate (A) to wall with screws (E) and washers (F). DO NOT MOUNT INTO DRYWALL.MUST BE BOLTED TO STUDS.

See Figure 1

This mount is designed to be mounted into wood studs. Included hardware is not designed to be used in hollow walls, cinder block, red brick, or metal studs. Should you want to mount your TV mount into any surface other than wood studs, Atlantic recommends that you seek the assistance of a professional installer.

Fits up to 24” wo d stud

Figure 1

OR

A

24 in./610 mm

E(x4)

F(x4)

F(x4)

E(x4)

A

In case the included hardwareis too long, use the spacers.

o

B

C

7

.Hang TV to wall plate as shown in Figure 3. 1.

Push TV unit lightly to lock it with wall plate, see Figure 4.2.

To adjust angle of your TV first loosen both adjustment handles, then angle your TV to your desired poisition. When TV is at desired angle then you can retighten both adjustment handles. See Figure 5.

3.

If you want to remove TV from bracket at a later time, pull down on both straps to release the locking mechanism, see Figure 6.

4.

TV Wall Mount

Step 3 Installation of TV to Wall Bracket

Pull Down to Remove Bracket

Handle

Down

Attention

Figure 6

Figure 4

Figure 5

Figure 3

8

Surge Protector

Operation Instructions:

Electrical Rating: 15A, 120 VAC, 60Hz, 1800 Watts Surge Lines Protected: 3-Line (L-N, L-G, N-G) UL Clamping Voltage: L-N 400V, L-G 400V, N-G 400V Surge Energy Joule Rating: 2160 Joules Maximum Spike Current: 144,000 Amps (3 Line Total) Response Time: < 1 Nanosecond Max. Spike Voltage: 6KV

Attenuation: Up to 40dB

UL Listed to U.S Standards: UL 1449, UL 498A

Frequecy: 150KHz~100MHzEMI/RFI Noise Filter:

Technical Specification:

OPERATION INSTRUCTIONS

Plug Wall tap into Wall Receptacle

Connect electrical devices to the outlets

9

Surge Protector

Information/Functions:

This wall tap surge protector is designed to protect your electronic equipment from AC power surges up to a certain level. It’s not a lightning arrestor, so it won’t afford protection while lightning strikes to nearby power lines, house, and/or service entrance antenna’s.

New X3 MOV (Metal Oxide Varistor) Technology:New designed component with improved material and surge functions absorb surges. Provides common and normal mode protection from high energy spikes.

Safety Shutdown Technology:Uses thermal fuses to power off your system, which protects against fire and other damage in the event of an extreme, extended over-voltage or when surge protection expires.

High-Frequency Capacitor:Reduces noise interference.

Surge Protected Outlets with 90° Rotating Design:Can be rotated to a different direction for easy usage with 3line surge protection

Each outlet pivots 90° (degrees) foryour convenience.

Grounded and Surge Protection LED indicators -

- Green light indicates your Surge Protection is working properly.

- Green light indicates your electrical wiring is properly grounded.

Do not plug the included surge protector into a power outlet that is different from the specs called out. If you don’t know or are not sure about the type of electrical power that is sup-plied to your home, please consult your local power company or a professional electrician.Use indoor and in dry locations. Not for use with aquariums and other water-related prod-ucts. This surge protector must be plugged directly into the power source and must not be ‘daisy chained’ together in serial fashion with other power strips, UPS, other surge protec-tors or extension chords. Risk of fire: Do not exceed electrical rating.

Don’t force your surge protector’s plug into an outlet that isn’t designed to accept a three-wire grounded-type AC plug (a three-pring plug). This plug is designed to be inserted into a grounded-type outlet only. If this plug doesn’t fit directly inside your outlet, do not attempt to force it in. Never attempt to take apart the plug in any way (or alter the power chord). Don’t attempt to defeat the grounding feature by using a 3-to-2 prong adapter. If you have ques-tions about grounding, consult your local power company or a qualified electrician.

Caution:

10

HDMI CablesInformation:

This Kit includes 2 HDMI™ cables

Supports Ethernet and 3DO.D.: 6.0mmDouble molding

Technical Specifications:Each HDMI cable measures 9 feet (2.74 m) in length.

1.4 Version

Cleaning Spray and Cloth

Instructions:The Screen Cleaning Kit in this package is comprised of 1 Bottle of Anti-Run Anti-Static Screen Cleaning Gel and 1 Cleaning Cloth

This special formula is designed for cleaning any type of screen, including LCD. The gel does not run down the screen.

Please shake bottle before spraying. Hold screen cleaner about 6 inches (15cm) away from the area to be cleaned. Spray screen, then use the included microfiber cloth to clean and polish. Shake or wash the cloth regularly to prevent collected dirt from making scratches. Do not spray excessive amount of cleaning gel.

Cleaning Cloth measures 7.87 sq. in. (20 sq. cm.)6.76 oz (200 ml)

Anti-Static Screen Cleaning Gel: IPA Free, 6.76 oz (200 ml)Cleaning Cloth: 7.87 sq. in (20 x 20 sq. cm.)

Technical Specifications:

Directions:

Caution: Keep away from children.

4 First aid measures:1. After inhalation: Supply fresh air; consult doctor in case of complaints.2. After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.3. After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist a doctor.4. After swallowing: If symptoms persist consult doctor

11

Velcro Cables TiesInformation:

This kit includes 2 velcro cable ties.Use 2 included velcro cable ties to help manage your cords.

Each velcro cable tie measures 8.66 in. (220 mm)

U.S. and other foreign patents pending / Patentes de los EUA y países extranjeros en trámite / Brevets en cours pour les États-Unis et autres pays / U.S. und andere ausländische Patente sind hängig

All rights reserved / Derechos Reservados /Tous droits réservés

Made in China / Hecho en China / Fabriqué en Chine

www.atlantic-inc.com

R1.5 131126 #36835817

2012

Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials and workmanship. If after inspection, we find that the product was defective in materials or workmanship we shall repair or replace the product at our discretion. This warranty does not cover accidental damage, misuse, improper care or alteration and excludes claims for incidental or conswqunetial loss. This limited warranty applies to product purchased in the U.S. and Canada. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. This war-ranty duration will last one year from date of purchase.

Information to consumers in application of EU WEEE Directive 96/2002This product is subject to European Union regulations that promote the re-use and recy-cling of used electical and electronic equipment. This product required the extraction and use of natural resources and may contain hazardous substances. The symbol above, on the product or on its packaging, indicuates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose your waste equipment by handling it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the store from which you purchased the product. For more information about Atlantic products, please visit us at www.atlantic-inc.com.