wall plate yd3001 installation instruction tv brackets unit
TRANSCRIPT
STEP 1 Attach the TV Brackets STEP 2 Attach Wall Plate to Wall
Safety Caution Supplied Parts and Hardware
OPTION A: Wood Stud Installation1-3 Attach the TV Brackets
No!
BubbleLevel
1-1 Select TV Screws
1-2 Need Spacer?
No, just choose the screws, washers.
Yes, choose the appropriate screws, washers,and spacers for your TV.
TV back
Bracket
Long Screw
Spacer
Washer
Bracket Washer
TV back
Short Screw
TV Brackets
x2E
x1
Wall PlateUnit
F
Not for M8 Screws
May be needed
ME
MD MF
MCMA MB
E
ETOP OF TV
2A-1
2A-2
x4x4 x4x4 x4x4
Philips ScrewsM4 x 12mmM4 x 30mm
Philips ScrewsM6 x 15mmM6 x 30mm
Philips ScrewsM8 x 25mmM8 x 45mm
MA MB MC
x8
SpacersM8 x 10mm
MD
x4
WashersM6
ME
x8
Spacers M8 x 5mm
MF
TV Screws / Spacers / Washers
1 2
3 4 5
Phillips Screwdriver
Please read this instruction carefully before installation.If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service via [email protected].
● This product is designed for use in wood stud and solid concrete wall. - DO NOT install into drywall alone.● The wall must be capable of supporting five times the weight of the TV and mount combined.● Do not apply this product to any purpose not indicated by ELIVED.● Incorrect installation may result in product damage or body injury. ELIVED shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us via [email protected].
STEP 1 (Continued)
Must Check Before Getting Started
Installation Tools (Not Included)
BandTape
2M
SocketWrench
ScrewdriverPencil ElectrodrillStud
FinderHammerAwl Wood
Drill BitMasonryDrill Bit
Wood Stud Installation Concrete Installation
NOTE: Not all hardware included will be used.
1/2"(13mm)3/8"
(10mm)7/32"
(5.5mm)
YD3001 INSTALLATION INSTRUCTION
If you have any questions, please contact us via [email protected]
Velcro Cable Ties ×3 Bubble Level ×1
(V3)
26"~55" Max:99LBS(45KG)
Max: 400x400mm/16x16"Min: 75x75mm/3x3"
Correct Diameter
Correct LengthToo LongToo Short
Too SmallToo Large
01 040302
For more spacing between bracket and TV
For raised back TV For Counterbore of TV To avoid the blocked input
MAX:400mm/16"
MAX:400mm/16"
Max:99LBS(45KG)
Min. 8"(203mm)
Solid concrete wall
CAUTION: DO NOT install into drywall alone.
<16mm(5/8")
Max.16"(406mm)
Drywall with wood studs
Center line Min. Wood Stud Size:nominal 4"(102mm)actual 3 1/2"(89mm)
Wall before Wood Stud<16mm(5/8")
Min. Wood Stud Size:nominal 2"(51mm)actual 1 1/2"(38mm)
Max.16"(406mm)
Lag BoltST8x65mm
x4A
M8 Washer
x4B
Open-endwrench
x1C
M4 Allen Key
x1D
Hardware (Wall / Product)
M8M6M4
3/8"(10mm)
Product DimensionsSTEP 3 Hang and Secure TV to Wall Plate STEP 4 Adjustments
184mm
MAX:400mm435mm
MAX:400mm
MIN:75mm
430mm
+20°
-20°
72mm
+45°/-45°
395mm
MIN:75mm
Tool-free Tilting adjustment
Leveling adjustmentIf needed, TV can be leveled ±3 degrees via adjusting the 4 nuts with the open-end wrench.
-20°
+20°
Before hanging TV, please conduct "wall plate installation integrity test" first.3-1 Wall Plate Installation Integrity Test
3-2 Hang and Secure TV to Wall PlateRelease preassembled screws down on brackets, hang TV with brackets onto the Plate, then fasten the safety screws.
99 LBS (45KG)
2.75"(70mm)
7/32"(5.5mm)
OPTION B: Solid Concrete Wall Installation
Contact us by email [email protected] to have these additional pieces shipped directly to you.
Concrete Wall Anchor4pcs
Concrete wall anchor (NOT INCLUED)
±3°
Tighten
Loosen
C
SafetyScrew
PhillipsScrewdriver
2A-3
2A-4
2B-1 Min. 8"(203mm)
DANGER
2B-2
2B-3
2B-42.75"(70mm)
If necessary
Tilting bolts D
Tighten
Loosen
M4 Allen Key
If TV keeps tilting down, adjust TV to desired angle then fasten tilting bolts with M4 Allen Key.
6 7 8
9 10 11
STEP 2 (Continued)STEP 2 (Continued) STEP 2 (Continued)
CAUTION: To avoid potential personal injury or property damage:All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Arrow Must Keep UP at this step!!
A
No!Install wall plate using lag bolts, washer and anchor with Socket Wrench, NO Electrodrill.
UP
AB
BA
UP
TV1 2
TV must be hang up by two person
BubbleLevel
CAUTION: Do not use in drywall or wood.
No!Install wall plate using lag bolts and washer with Socket Wrench, NO Electrodrill.
CAUTION: To avoid potential personal injury or property damage:All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Arrow Must Keep UP at this step!!
A
Be sure to drill into the center of the stud.