y prusa mini lack drawers double size · 2020. 6. 26. · summary i fused two of the prusa mini...
TRANSCRIPT
Summary
I fused two of the Prusa Mini sized lack drawers to be able to fit more tools.
You can fit 3 normal sized ones + this double size, but there will be a smallgap at the right side.
The fused drawer consists of a normal drawer and the far-right one.
I also cut off the vertical part of two corners as it kept warping on and theprint bed on the Prusa Mini was to small to also fit a brim.
3D Printers > Other Accessories
prusamini lack ikealackenclosure ikealack enclosure
drawer
Printed without support in PETG 0.25mm
This remix is based on
J John
Prusa Mini LackDrawers DoubleSize
VIEW IN BROWSER
updated 26. 6. 2020 | published 26. 6. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
171.9 KBupdated 26. 6. 2020
200.3 KBupdated 26. 6. 2020
Lack Enclosure Drawers for Prusa MINI
by Bdaboy
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
lackdrawers-prusamini-doublesize-drawer.stl
lackdrawers-prusamini-doublesize-case.stl