tillage and planting - agricultural machinery parts,...

TILLAGE AND PLANTINGAFTER MARKET SUPPORT

Set the stage for higher yields—with the strength and durability of New Holland Earth Metal® disk blades and sweeps. With tough, flexible alloy-steel construction—based on years of in-depth research on tillage and planting agronomics—these disk blades handle even the toughest residue. Thorough testing ensures superior durability and long life—saving you unnecessary downtime. And, with one of the largest selections in the industry, there’s an Earth Metal blade or sweep for every equipment brand and application.

VISIT YOUR NEW HOLLAND DEALER OR GO ONLINE TO THE PARTSTORE TO VIEW THE ENTIRE EARTH METAL LINE.

EARTH METAL® LONG-LASTING STRENGTH

FORM THE FOUNDATION FOR SUCCESS WITH SMART SOLUTIONS FROM NEW HOLLAND.From unpredictable weather patterns to new techniques, successful tillage is a moving target. At New Holland, we strive to help you stay on top of these challenges—with the right technologies, parts and service for your farming needs.

The genuine New Holland parts and expert tips throughout this book aim to help you achieve higher yields and greater success by getting the right start with your tillage efforts. In fact, the only parts and kits you’ll see in this book are those that meet our rigorous engineering and testing standards.

Quality parts aside, your dealer is always ready to assist you with Certified Maintenance Inspections, Planned Maintenance Agreements, extended warranties, and sound advice when it comes to the health and performance of your equipment. Consider this book a supplement to their expertise.

.

TABLE OF CONTENTS

Brian SpencerParts Marketing ManagerTillage, Planting and Seeding ProductsCNH Industrial Parts & Service

CULTIVATORS 6

DISK HARROW 10

VERTICAL TILLAGE 26

DEEP TILLAGE 27

CHISEL PLOW SWEEPS 28

COULTERS 30

MOLDBOARD PLOWS 32

PLANTERS 34

AIR HOE DRILLS 36

DISK DRILLS 39

SEED LUBE/PAINT 40

HITCH PARTS 42

PLOW BOLTS 44

PRECISION FARMING 46

REMAN 49

SHOP PRODUCTS 50

INDEX 52

EARTH METAL® LONG-LASTING STRENGTH

SAVE TIME, INCREASE PRODUCTIVITY

Thanks to the superior strength and flexibility of Earth Metal, producers can avoid unnecessary downtime—sometimes as much as the half-day it takes to change out wear parts. In addition to resisting stress fractures that might otherwise shatter conventional blades and sweeps, Earth Metal disk blades are measurably stronger and last significantly longer.

SMART TIP

Not all sweeps and disk blades are created equal. The stronger, sharper and longer-wearing they are, the fewer headaches in the field—and the fewer unnecessary drains on your profit. Less breakage and more efficient seedbed preparation and planting mean higher yields.

But what goes into a better sweep, opener or disk blade? The superior design of New Holland Earth Metal® ground-engaging components is based on years of in-depth research on tillage and planting agronomics—the science behind maximum yields.

The resulting product is tougher, longer-lasting and significantly more durable in the face of harsh field and crop conditions.

EARTH METAL®

PROVEN. PREFERRED. POWERFUL.

EARTH METAL®4

WHAT GOES INTO BETTER DISK BLADES? A LOT.Here’s an inside look at the Earth Metal manufacturing and testing process.

The Earth Metal factory is one of the most advanced in the world; material-handling robots assure quality control and consistency to give you the best product for your farm.

A 25-ton decoiler feeds steel through a leveler to a 2,000-ton press, which stamps out disk blanks. These blanks then undergo further processing, including edging, notching, shaping and heat-treating. The cutting edges of the disk blades are precision-machined using automated edge-turning equipment to create the optimal combination of edge sharpness and strength.

After emerging from the heat-treatment process, disk blades are water quenched while firmly locked in their dies. This allows for a shape that eliminates up to 90 percent of “disk wobble” and contributes to the overall toughness and durability of the blades.

In the finishing process, disk blades undergo shot blasting to remove scale. They are then coated with high-gloss enamel, which is baked to a smooth, hard finish that improves surface appearance and provides rust protection. An inline oven draws each blade individually, which relieves internal stresses and improves ductility and quality.

The process doesn’t end after production. Brinell or Rockwell tests measure hardness to ensure the disk blade is resistant to wear. The Ball test measures toughness by forcing a polished steel ball through the disk blade; the length and shape of the resulting fractures are measures of the disk blade’s ability to resist cracking.

Disk blades are also tested for elasticity under load. This test applies pressure to the blade—the propensity of the blade to return to its original shape afterward is a measure of its ability to resist impact.

EARTH METAL®

EARTH METAL®

1

2

3

4

5

6

WE’VE GOT A DISK BLADE FOR THAT.The Earth Metal line is one of the largest in the industry—with disk blade options for nearly every equipment brand and application. The Super Sharp™ edges on our latest disk blades, for example, are ideal for tough field conditions and genetically modified crops. See page 10 to learn more about choosing the right disk blade, and ask your dealer for a full selection.

5

CULTIVATORS – SWEEPS

CULTIVATORS – SWEEPS6

EARTH METAL® SWEEPS—MADE TO LASTAvailable for nearly every cultivator and field condition, our patented, heavy-duty Earth Metal sweeps are made to last—with an agronomic design for superior strength and optimum wear patterns. The high-strength alloy steel and superior heat treatment of Earth Metal sweeps promote better scouring and longer wear life. Refer to our Field Cultivator Application Chart to find the sweep that’s right for your application.

MAXXI-POINT™

• Constant-width wing design for maximum performance

• Heavy-duty extended nose with ½-inch wear point for increased wear life and penetration

PART NO. SIZE

372560A1 7 3⁄10"

372561A1 9 3⁄10"

372562A1 11 3⁄10"

PART NO. SIZE

380434A1 8" full

380435A1 9" full

380436A1 10 ½" full

400309A1 Adapter

MAXXI-GRIP™

• 20 percent heavier than Maxxi-Width sweep for increased wear life

• Mounts to heavy-duty cast adapter—easy to install, easy to replace

• Neoprene gripper strips on the side of the casting hold sweep firmly in place

MAXXI-WIDTH™

• Constant-width wing design for maximum performance• Heavy-duty, 1-inch reinforced wear tip for improved

penetration and less draft• Fits New Holland and most other makes of field cultivators

PART NO. SIZE

1547100C2 12 ½" full

1547101C2 7 ½" LWC

1547102C2 7 ½" RWC

1547103C2 9" LWC

1547104C2 9" RWC

PART NO. SIZE

1547095C2 4 ½" full

1547096C2 6" full

1547097C2 7 ½" full

1547098C2 9" full

1547099C2 10 ½" full

CULTIVATORS – SWEEPS

Earth Metal heavy-duty

Maxxi-Width™ and

Maxxi-Point™ sweeps

have 1¾-inch hole

centers. Each series

has a 7⁄16-inch bolt

hole to accommodate

cultivators with 7⁄16-inch holes.

To accommodate

field cultivators with 3⁄8-inch bolt holes,

use adapter bolt,

part number 810220C1

(7⁄16-inch head and 3⁄8-inch shaft).

MAKE/MODEL

HOLE SIZE

HOLE CENTERS

STEM ANGLE

Anderson 3⁄8" 1 ¾" 47°

Baker 7⁄16" 1 ¾" 47°

Bourgault 7⁄16" 1 ¾" 47°

Brady (prior to '70 – '71) 3⁄8" 1 ¾" 40°

Brady (after '70 – '71) 3⁄8" 1 ¾" 40°

Bush Hog 3⁄8" 1 ¾" 47°

Caulkins 3⁄8" 1 ¾" 47°

CASE, FC, FCM, FCSW 3⁄8" 1 ¾" 47°

Case IH and IH 7⁄16" 1 ¾" 47°

C.C.I.L. 3⁄8" 1 ¾" 47°

Cockshutt 285, 485 3⁄8" 1 ¾" 47°

Crustbuster 7⁄16" 1 ¾" 47°

Deere 1000 Series 3⁄8" 1 5⁄8" 43°

Deere 960 7⁄16" 1 ¾" 47°

Deere CCA, CC10, CC20 3⁄8" 1 ¾" 47°

Degelman 3000 Series 7⁄16" 1 ¾" 47°

DMI 7⁄16" 1 ¾" 47°

Ezee-On ½" 1 ¾" 47°

Flexi-Coil 200, 400 7⁄16" 1 ¾" 47°

MAKE/MODEL

HOLE SIZE

HOLE CENTERS

STEM ANGLE

Ford 208 3⁄8" 1 ¾" 47°

Frontier 7⁄16" 1 ¾" 47°

Glencoe, FC, MFC, FCSW 3⁄8" 1 ¾" 47°

Hesston 7⁄16" 1 ¾" 47°

Hiniker 7⁄16" 1 ¾" 47°

Kent 7⁄16" 1 ¾" 47°

Kewanee 3⁄8" 1 ¾" 47°

Krause 3⁄8" 1 ¾" 47°

Landoll 7⁄16" 1 ¾" 47°

Massey Ferguson 160 3⁄8" 1 ¾" 47°

Moline FT200 3⁄8" 1 ¾" 47°

Morris L240, L320 3⁄8" 1 ¾" 47°

Oliver 285,385,485 3⁄8" 1 ¾" 47°

Rhino/Athens 7⁄16" 1 ¾" 47°

Sunflower 7⁄16" 1 ¾" 47°

Taylor 3⁄8" 1 ¾" 47°

Wil-Rich 7⁄16" 1 ¾" 47°

Win Power 1500 7⁄16" 1 ¾" 47°

White Farm Equipment 3⁄8" 1 ¾" 47°

FIELD CULTIVATOR APPLICATION CHART

MAXXI-POINT PLUS™

• Same outstanding design and manufacturing features as the Maxxi-Point sweeps

• Mounts to heavy-duty cast adapter—easy to install, easy to replace

PART NO. SIZE

87460413 7 3⁄10"

87460414 9 3⁄10"

400309A1 Adapter

MAXXI-GRIP ADAPTERPART NO. 400309A1 (SINGLE) PART NO. 400309A1E (BULK PACK) PART NO. B96705NH (FOUR ADAPTERS WITH HARDWARE)

CULTIVATORS – SWEEPS 7

PART NO. B96705NH

PART NO. 400309A1

ROBUST OFFERINGS AT YOUR DEALERSHIP OR

PARTSTORE.AGRICULTURE.NEWHOLLAND.COM

CULTIVATORS

CULTIVATORS8

NON-EARTH METAL® MISCELLANEOUS SWEEPS

PART NO. SIZE THICKNESS TYPE ANGLE HOLES HOLE SPACING

479005R2 6" 3⁄16" Full 57° 3 1"

479006R2 8" 3⁄16" Full 57° 3 1"

479009R2 8" 3⁄16" LH 57° 3 1"

479010R2 8" 3⁄16" RH 57° 3 1"

479007R2 10" 3⁄16" Full 57° 3 1"

479011R2 10" 3⁄16" LH 57° 3 1"

479012R2 10" 3⁄16" RH 57° 3 1"

479008R2 12" 3⁄16" Full 57° 3 1"

ALL-PURPOSE SWEEPS

UNIVERSAL ECONOMY SWEEPSPART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE

6083BA 4" ¼" 55° 3 2 ¼" 7⁄16"

6078BB 6" ¼" 55° 3 2 ¼" 7⁄16"

6079BC 8" ¼" 55° 3 2 ¼" 7⁄16"

6080BC 10" ¼" 55° 3 2 ¼" 7⁄16"

6081BC 12" ¼" 55° 3 2 ¼" 7⁄16"

PART NO. SIZE THICKNESS ANGLE HOLES HOLE SPACING BOLT SIZE

87589793 9" ¼" 47° 2 1 ¾" 7⁄16"

4497 11" ¼" 47° 2 1 ¾" 7⁄16"

5786 11" ¼" 47° 2 1 ¾" 7⁄16"

4498 12" ¼" 47° 2 1 ¾" 7⁄16"

FIELD CULTIVATOR SWEEPS

CULTIVATORS 9

CULTIVATORS

DANISH TINE SWEEPS• ¼-inch thickness

PART NO. SIZE

1547180C1 2 ½" full

1547181C1 4 ½" full

1547182C1 7" full

1547183C1 9" full

811191C1 1 3⁄8" reversible

PART NO. (WHITE) PART NO. (SILVER) DESCRIPTION

73342628 73342629 1 ½" x 9" shank protector - package of 100

73342634 73342635 1 ½" x 9" shank protector - package of 25

73342630 73342631 1 ¾" x 9" shank protector - package of 100

73342636 73342637 1 ¾" x 9" shank protector - package of 25

73342632 73342633 2" x 12" shank protector - package of 100

73342638 73342639 2" x 12" shank protector - package of 25

POLY SHANK PROTECTORS – WHITE AND SILVERPrevent residue build-up and protect against wear with New Holland poly shank protectors. The non-stick poly surface allows the shank and attached shovel to glide through soil and resists friction when cultivating and digging.



DISK BLADE SELECTION TOOL NOW AVAILABLE

WITH MY SHED™ MOBILE APPEnter diameter, thickness and bolt size to find the best blade for your application. Visit Partstore.Agriculture.NewHolland.com to download the My Shed mobile app.

DISK HARROW – DISK BLADES

DISK HARROW – DISK BLADES10

STEPS TO SELECTING THE RIGHT BLADE

STEP 1You must first identify the size of the disk blade you need. For illustrative purposes, we will assume that you’re looking for a 20-inch x 4.5-millimeter-thick disk blade.

STEP 3Finally, you need to decide if you are looking for a solid blade or a notched blade. In this case, we’ll assume it’s a solid blade.

STEP 2The size and shape of the center hole depends on the arbor bolt size. As an example, let’s say you’re looking for the disk blade size listed above with a 1 ½-inch round arbor bolt.

TOUGH CROP RESIDUE? GO SUPER SHARP

With edges up to five times sharper than conventional blades, our Super Sharp™ edge blades are designed to process and size residue of the toughest BT genetic crops. They also stand up under rocky conditions, without chipping or cracking, thanks to superior Earth Metal alloy steel. Be sure to use Kevlar gloves to install your Super Sharp edge blades, part number 87299086.

SMART TIP

STEP 4The following pages contain charts to help you identify the proper blades based upon the dimensional preferences identified in steps one through three. If you are fitting disk blades to a New Holland machine, you will need to refer to the chart titled “Crimp Centered Disk Blades” on page 14. If you are looking for full concave disk blades to fit any other make and model, you need to refer to the “Full Concavity Disk Blades” chart on page 13.

EXAMPLEBased on the above example, you would choose part number 87618056. Need some extra tilling power? Go with our Super Sharp™ edge notched blades, part number 87618057.

BLADE SIZE ARBOR BOLT SIZE CNH PART NO.

DIA (IN)

THICKNESS (MM)

7⁄8"SQ.

1" SQ.

1" RD.

1-1⁄8" SQ.

1-1⁄8" RD.

1-¼" SQ.

1-½" SQ.

1-½" RD.

1-5⁄8" RD.

1-¾" SQ.

1-¾" RD.

2" RD.

2-¼" SQ.

HOLE STYLE

SUPER SHARP SOLID

SUPER SHARP NOTCHED

20 4.5 • • SR4 87618056 87618057

DISK BLADE SELECTION TOOL NOW AVAILABLE

WITH MY SHED™ MOBILE APP


DISK HARROW – DISK BLADES 11

DISK BLADE CENTER HOLE REFERENCE GUIDE

HOLE SIZE

FITS ARBOR BOLT

CL1 7⁄8" square

CL2 1" square

CL3 1 1⁄8" square

CL4 1 ¼" square

CL5 1 ½" square

CL6 1 ¾" square

R1 1" round

R2 1 1⁄8" round

R3 1 ¼" round

R4 1 ½" round

R5 1 ¾" round

R6 2" round

R6.5 2 ¼" round

R7 2 ½" round

CLOVERLEAF OR SQUARE (CL)

ROUND (R)

HOLE SIZE

FITS ARBOR BOLT

SR1 7⁄8" square

SR2 1" square

SR3 1 1⁄8" square

SR4 1 ¼" square

SR4.5 1 ½" square

SR5 1 ½" square

SR6 1 ¾" square

SR7 2 ¼" square

DS1 7⁄8" square

DS2 1" square

DS3 1 1⁄8" square

DS4 1 ½" square

SQUARE ROUND (SR)

DUAL SQUARE (DS)

THICKNESS CONVERSION CHARTS FOR DISK BLADES:GAUGE/INCH TO METRIC

MM INCH

2 0.079

2.5 0.098

3 0.118

3.5 0.138

4 0.157

4.5 0.177

5 0.197

6.5 0.256

8 0.315

10 0.394

12 0.472

16 0.630

GAUGE INCH

14 0.083

13 0.095

12 0.109

11 0.120

1⁄8 0.125

10 0.134

9 0.148

8 0.165

7 0.180

6 0.203

¼ 0.250

5⁄16 0.312

1⁄8 0.375

½ 0.500

5⁄8 0.625

SQUARE (SQ)

HOLE SIZE

FITS ARBOR BOLT

SQ1 1" square

SQ1.5 1 ¼" square

SQ2 2 3⁄8" square



DISK MANUFACTURER MODEL/APPLICATION BOLT SIZE

Allis Chalmers 2100 and 2300 series 1 ½" square

Amco WOD, WTD 1 1⁄8" square

WOE 1 3⁄8" round

WOF, WOJ, WTF, WTJ, F-15 1 ½" squareAthens 48 1" square

62 1 1⁄8" square

126, 131 1 ½" squareBlanton 4500 1 ½" square

B900, B1000 1 1⁄8" square

3000H 1 ½" square

Brent Brent CPC 1 ¾" round

Brillion Land Commander 1 ½" square

Burch Kwik Set, 209 1 1⁄8" square

208BW 1 ½" round

Tru-Cut 7⁄8" squareBush Hog 145, 146 reg 1 ¼" square

146 HD 1 ½" square

346 2 ¼" round

245 1 ¼" or 1 ½" square

1440, 1424, 1432, 1436, 1438, 1444 rolling bedder

1 1⁄8" square

1422 1" or 1 1⁄8" square

1437 1 1⁄8" or 1 ½" square

1445, 1450 1 1⁄8" or 1 ¼" squareDunham-Lehr GC 1 1⁄8" square

34 1 ½" roundFord 201, 202, 204 1" round

219, 236 1 ½" square

220, 222, 223, 240, 241 1 1⁄8" square

221 15⁄16" round

243 1 ½" roundHesston 2410 1 ¾" round

2420, 2440 1 1⁄8" squareGlencoe Soil finisher 1 ½" round

Yield Builder ripper 1 ½" roundIH/Case IH 122, 132, 350, 370, 470, 475,

480, 485, 4901 1⁄8" square

500, 501, 596, 610, 770 1 ½" square

630 1 ½" round

780 1 ¾" squareJohn Deere 100, 110, 200, 210, 220, 230,

310, 6371 1⁄8" square

115 1 1⁄8" round

105 1" round

1635, 1640, 2620, 2621 1 ½" square

215, 225, 425, 215, 235, 4000, 1630

1 ½" round

BWA, BWF, 525 1 ¼" square

DISK MANUFACTURER MODEL/APPLICATION BOLT SIZE

John Deere(continued)

2650, 2651 1 ¾" square

2700 2 ¼" square

510, 512 ripper 1 1⁄8" square

Kent Discovator, 6112D, 6118D, 6323D, 6327D

1 ½" round

7333D, 6540D, 7550D 1 ½" round

Kewanee 800 and 1000 series 1 1⁄8" square

Krause 1465, 1470, 1740, 1769, 3200 series

1 ¾" round

1952, 1956, 1960, 1970, 1968, 1969, 1979, 1965, 1966, 1976

1 ½" round

1901, 1904, 1907, 1922, 1925, 1928, 1921, 1924, 1927, 1959, 1963, 1973

1 ½" round

4995, 5800, 7300, 7400, 8200, 8300, 1498, 1499, 1580, 1912, 1915, 1918

1 ½" round

14801 ½" round or 1 ¾" round

1900, 1950, 2100, 2200, 2400, 3100 series

1 ½" round

2700 series 2 ½" roundLandoll Till-All 1 ¼" square

Weatherproofer ripper 1 ½" round

M&W Earthmaster (on a gang) 1 ½" square

MasseyFerguson

30, 40, 270 1 ½" square

21 1" square

25, 39 1" round

120, 220, 233, 213 1 1⁄8" square

52, 72 1 1⁄8" round

520, 620, 820 1 ¼" square

Miller Series 1 and series 2 1 ¾" round

New Holland OD100, OD200, TD100, TD200 1 ¾" round

OD300 2" roundRhino 127, 131, 137, 167, 177, 187 1 ½" square

Flex 90 1 1⁄8" square

Flex 90B 1 ¼" squareSchafer 355 1 ¾" round

555 2" roundSunflower 1210, 1230 1 ½" round

1211, 1231, 1233, 1300, 1320, 1330, 1321, 1331, 1430, 1440

1 ¾" round

1431, 1434, 1435, 1441, 1444, 1541, 1544, 4211, 6010, 6030, H3, H4

1 ¾" round

White 250, 251, 252, 253, 254, 255, 256, 263, 264, 265, 271, 272

1 1⁄8" square

273, 274 1 ½" round

281 1 ½" square

DISK BLADE CENTER HOLE REFERENCE GUIDE DISKS & RIPPERS



*NOT EARTH METAL

FULL CONCAVITY DISK BLADES FOR ALL MAKES


DIA. (IN)

THICKNESS (MM)

7⁄8"SQ.

1" SQ.

1 1⁄8" SQ

1 ¼" SQ

1 ½" SQ

1 ¾" SQ

2 3⁄8" SQ

1" RD

1 1⁄8" RD

1 ¼" RD

1 ½" RD

1 5⁄8" RD

1 ¾" RD

2" RD

HOLE STYLE

STANDARD EDGE SOLID

STANDARD EDGE NOTCHED

SUPER SHARP SOLID

SUPER SHARP NOTCHED

16 3 • • • DS2 963879R2

16 3 • CL3 121913A1

16 3 • CL2 MAG411D7988*

18 3 • CL2 MAG411D5921*

18 3.5 • CL3 121914A1

18 3.5 • • • DS2 963880R2

18 4 • • • DS3 87618050 87618051

18 4.5 • • SR4 87618052

20 4.5 • • SR1 87618053

20 4.5 • • • DS3 87618054 87618055

20 4.5 • • SR4 87618056 87618057

20 4.5 • CL3 87618058

22 4.5 • SQ2 87618059 87618060

22 5 • • SR4 87618068 87618069

22 5 • • SR5 87618064 87618065

22 5 • • SR4.5 87618070 87618071

22 5 • • • DS3 87618066 87618067

22 5 • CL3 73342886

22 6.5 • • SR4 87618074

22 6.5 • • SR5 87618075

24 5 • • SR4 956702R4

24 5 • • SR5 604858R3

24 5 • • • DS3 644011R5

24 5 • • SR6 998827R1

24 6.5 • • SR5 998865R2 998866R3

24 6.5 • • SR4 790-1000

24 6.5 • SQ2 963862R2 963863R2

24 6.5 • SQ1 407293R2 407428R2

24 8 • • SR5 2804227R2

26.5 6 • CL4 87585198 87585199

26.5 6 • • SR5 87585200 87585201

26.5 6.5 • R6 31332R2

26.5 6.5 • CL4 407298R3

26.5 6.5 • • SR5 407434R4 407431R4

26.5 6.5 • CL4 407429R3

26.5 8 • • SR6 31357R2 31356R2

26.5 8 • • SR5 2804228R3 87429148

28.5 6 • SQ1.5 87585810 87585811

28.5 6.5 • SQ1.5 407300R3 958243R4

28.5 8 • SQ1.5 339388A2 339389A2

32.5 10 • SQ1.5 998861R2




DIA. (IN)

THICKNESS (MM)

7⁄8"SQ.

1" SQ.

1 1⁄8" SQ.

1 ¼ SQ.

1 ½" SQ.

1 ¾" SQ.

1" RD.

1 1⁄8" RD.

1 ¼" RD.

1 ½" RD.

HOLE STYLE

STANDARD EDGE SOLID

STANDARD EDGE NOTCHED

SUPER SHARP SOLID

SUPER SHARP NOTCHED

16 3 • • SR1 84192889

16 3 • • SR3 31022R1

16 3.5 • • SR3 651197R1

16 4.5 • • SR4 87442973

18 3.5 • • SR1 31018R1

18 4 • • • DS2 87618082

18 4 • • SR3 87618083

18 4.5 • • SR4 87442974 87442979

18 5 • • SR4 87442980

20 4 • • SR4 87442981

20 4.5 • • SR3 87618084 87618085

20 4.5 • • SR4 87442981 87442982

20 5 • • SR3 87618086

20 5 • • SR4 87442986

20 5 • • SR4 87442983 87442984

20 6.5 • • SR4 87442985

20 5 • CL5 87442998

22 4.5 • • SR4 87618094

22 4.5 • • SR4 87442991 87442992

22 4.5 • • SR3 87618087 87618088

22 5 • CL5 87442999

22 5 • • SR3 87618095 87618090

22 5 • • SR4 87442996

22 5 • • SR4 87442993 87442994

22 5 • • SR3 87618089

22 6.5 • CL5 87443000 87612754

22 6.5 • • SR4 87442995

22 6.5 • • SR3 87618093

24 5 • CL3 543437R1 543438R1

24 6.5 • • SR4 181605A1 87442997

24.3 5 • CL5 87443003

24.3 6.5 • CL5 549986R2 87443004

26.5 6 • CL5 87585196 87585197

26.5 6.5 • CL5 58934C3 58917C3

26.5 8 • CL5 28336R3 28345R3

28.5 6 • CL5 87585202 87585203

28.5 6.5 • CL5 27601R3 27600R3

28.5 8 • CL5 31224R3 31225R3

28.8 8 • CL6 60276C3

30 8 • CL6 60278C2

32.5 8 • CL6 130868A2 60279C3

CRIMP CENTER DISK BLADES

EDGE CARE™ PLUS: RESTORES EARTH METAL® TO FACTORY-APPROVED SHARPNESS

50 PERCENT IMPROVED SHARPENING TIME (2 TO 3 MINUTES PER DISK BLADE)



PART NO.DIA. (IN)

THICKNESS (MM)

CENTER HOLE DIA. (IN)

NO. OF HOLES

BOLT CIRCLE (INCHES/MM) EDGE

443623A1 14 2.5 2 ½ 4 101.6 Standard

84180366 18.1 3 2 ½ 4 127 Standard

443629A1 18.1 6.5 4 5 139.7 Standard

443630A1 18.1 3 1 ¾ 4 127 Notched

84380555 18.1 3 2 ½ 4 127 Standard

84380560 18.1 3 2 ½ 4 127 Notched

87443007 20.3 5 4 5 139.7 Super sharp

87443008 20.3 6.5 4 5 139.7 Super sharp

87443009 20.3 6.5 4 5 139.7 Super sharp notched

87443010 22.3 6.5 4 5 139.7 Super sharp

FLAT CENTER DISK BLADES

PART NO. DIA. (IN) THICKNESS (MM) HOLE STYLE ARBOR BOLT SIZE

87401019 20 5 CL5 1 ½" Sq

87415788 20 5 SR4 1 ¼" Sq.

1 ½" Rd.

THREE-SIDED BLADES

• Sharpen blades on the gang or sharpen individual, hub-mounted blades• Simple design allows quick and easy setup• Cold-sharpening technology extends disk blade life without sacrificing

blade diameter, ductility or hardness• Extra sharpening wheel included

EDGE CARE PLUS PART NO. 73341805

PART NO. 87401019

DISK HARROW – DISK BEARINGS16

DISK HARROW – DISK BEARINGS

NEW BLADES? TIME FOR NEW BEARINGS.When you invest in new blades—particularly our stronger, sharper and longer-wearing Earth Metal® blades—you’ll want new bearings as well. The following pages showcase your New Holland dealer’s extensive line of disk harrow bearings, sorted by manufacturer.

MANUFACTURER PART NO. BORE REFERENCES APPLICATION FLANGE

Allis Chalmers

DC211TT3 1 ½ sq. W211PP3 K7 disk

AMCO

10272 DS208TT5 1 1⁄8 sq. W208PPB5 WTD5, WTD6, LFD2, LFDB2 disks DS80MS

10333 DS208TT8 1 1⁄8 sq. W208PPB8 WTD10, WTD3, WTD4 disks

11052 DC210TT2 1 15⁄16 rd. W210PP2 Disk harrows with 1 15⁄16"-axle

11071 DC211TT3 1 ½ sq. W211PP3 516, 517, 518, F15 disk harrows

11078 DS210TT4 1 1⁄8 sq. W210PP4 Disk harrows with 1 1⁄8"-axle DS90MS

11079 DS208TT6 1 sq. W208PPB6 LFBD2, LFB2, LTB2

11503 DC211TTR4 1 ½ sq. GW211PP4

11504 DC214TTR3 2.688 rd. GW214PP3 Disk harrows with 2.688"-axle

G10218 DC214TTR2 2 ¾ rd. GW214PP2 WTF2, WOJ10, WOF10 disks

G10333 DS208TTR8 1 1⁄8 sq. GW208PPB8 13 ½ pulverizing disk DSG80MSA

G10446 DC210TTR4 1 1⁄8 sq. GW210PP4 Disk harrows with 1 1⁄8"-axle

G10771 DS210TTR2 1 15⁄16 rd. GW210PPB2 Disk harrows with 1 15⁄16"-axle DSG90MSA

G10906 DS211TTR3 1 ½ sq. GW211PPB3 Disk harrows with 1 ½"-axle DSG100MSA

G10272 1 1⁄8 sq. GW208PPB5 Disk harrows with 1 1⁄8"-axle

G11071 DC211TTR3 1 ½ sq. GW211PP3 WOF3, WOF5, WOF6, WOJ3, WOJ4, offset disks

G11078 DC210TTR4 1 1⁄8 sq. GW210PP4 RB1, 2, 3, 4, 5, 6, WOD2, 341, 342, 343, 344, disk harrows

Athens

DC208TT5 1 1⁄8 sq. W208PP5 Ridger

DS208TT5 1 1⁄8 sq. W208PPB5 Ridger DS80MS

1 1⁄8 sq. GW208PPB5

DS208TT6 1 sq. W208PPB6

DC211TT3 1 ½ sq. W211PP3 Levee plow, 1st series

DC211TTR2 2 3⁄16 rd. GW211PP2 All Case IH disk harrows

DC211TTR3 1 ½ sq. GW211PP3 All Case IH disk harrows

DS211TT6 1 ½ sq. W211PPB6 Levee plow, 2nd series DS100MS

DS211TTR3 1 ½ sq. GW211PPB3 Disk harrows, new ground disks DSG100MSA

Bingham

GA15 DC208TT5 1 1⁄8 sq. W208PP5 Bedder

DISK HARROW – DISK BEARINGS 17



Blanton

1023 DS208TT12 1 1⁄8 sq. W208PPB12 Square axle disks

7129 DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows

BC1 DC208TT8 1 1⁄8 sq. W208PP8

L512B 7⁄8 sq. W208PPB11 Square axle disks

Brent

DS211TTR13 1 ¾ rd. GW211PPB3 Front gang. Early Riser CPC and Earthquake with 4-bolt flange DSG100MSA

DS209TT2 1.7717 rd. W209PPB2 Rear gang. Early Riser CPC and Earthquake with 4-bolt flange DS85MS

FD211RE 1 ¾ rd. DHU1-3/4S211 Rear gang. Late CPC and Earthquake with 4-bolt flange

Brillion

2J516 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

3J131 DS211TT3 1 ½ sq. W211PPB3 DS100MS

9C16 DC208TT8 1 1⁄8 sq. W208PP8

FD211RM 1 ½ sq. DHU1-3/4S211 Land Commander I and II disk gangs

Burch

DS210TT2 1 15⁄16 rd. W210PPB2 EZ, EZ-A, EZ-B, 145 disks. Kwik set, hippers, ridgers DS90MS

201A56 DS208TT13 7⁄8 sq. W208PPB13 Harrow DS80MS

203214 DS211TT3 1 ½ sq. W211PPB3 Offset disk DS100MS

204-82 DS211TT6 1 ½ sq. W211PPB6 Super Tandem built in 1973 and after DS100MS

208-12 DS209TTR2 1 ¾ sq. GW109PPB2 DSG85MSA

78672A DS211TTR3 1 ½ sq. GW211PPB3 Offset disks, Super Tandem DSG100MSA

9554A DC208TT5 1 1⁄8 sq. W208PP5 Ridger, 8 row

J9373 DS208TT5 1 1⁄8 sq. W208PPB5 Ridger, E-Z set E-2GO, Early Riser DS80MS

Bush Hog

1100082475 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows with 1 ½" axle DS80MS

11142416 DS208TT12A 1 1⁄8 sq. W208PPB19 Disk harrows with 1 1⁄8" axle

14-6-244 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrow with 2 3⁄16" axle

14-36-183 DC208TTR17 1 1⁄8 sq. GW208PP17 1424, 1426, 1432, 1436, 1438, 1439, 1444, with 1 1⁄8" gang bolt

14-22-63 DS208TT6 1 sq. W208PPB6 Disk harrows with 1"-axle DS80MS

14-24-26 DS208TT12 1 1⁄8 sq. W208PPB12 All Case IH disk harrows

14-24-63 DC208TTR17 1 1⁄8 sq. GW208PP17 1422, 1423 disks with 1"-gang bolt

14-4-5 DS209TT2 1.7717 rd. W209PPB2 1432, 1436 disks DS85MS

14-5-109 DS210TT2 1 15⁄16 rd. W210PPB2 145 DS90MS

14-6-430 DC211TTR3 1 ½ sq. GW211PP3 145, 146, 246, 1435, 1437 with 1 ½"-gang bolt

16-11-176/7950006 DC208TT5 1 1⁄8 sq. W208PP5 Bedder and ridger

Caldwell

DS208TT5 1 1⁄8 sq. W208PPB5 1 1⁄8 axle models DS80MS




Calkins

5449031 DS209TTR5 1 ¼ sq. GW209PPB5 DSG85MSA

CASE

270061503 DC214TTR3 2.688 rd. GW214PP3

H747139 DC208TT5 1 1⁄8 sq. W208PP5 Trencher boom end sprockets

H747303 DC208TT10 1 ½ rd. W208PP10 TF300 trencher boom end sprockets

H747394 DC211TT2 2.188 rd. W211PP2 Trencher boom end sprockets

H747410 DS209TT2 1.7717 rd. W209PPB2 CASE Davis 700 chain drive DS85MS

H747444 DC211TT3 1 ½ sq. W211PP3 CASE, CASE Davis trenchers

T14116 DC208TT2 1 sq. W208K2-E9003

T15820 DS208TT6 1 sq. W208PPB6 Small ridger DS80MS

T16288 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

T25486 DS208TT8 1 1⁄8 sq. W208PPB8 630210R91 DS80MS

T28503 DS208TT12 1 1⁄8 sq. W208PPB12 All Case IH disk harrows

T34178 DS209TT6 1.535 rd. W209PPB6 B, BW, WB series disks T29920*

T51610 DS211TTR3 1 ½ sq. GW211PPB3 K23, K23A, G59 disks (sperical O.D.) DSG100MSA

T51653 DC211TTR3 1 ½ sq. GW211PP3 E30, G109, G110, G119, K23, K23A, disk harrows

T53781 DS210TTR2 1 15⁄16 rd. GW210PPB2 F21, F21H disk harrows DSG90MSA

T54897 DS210TTR5R 1.785 rd. GW210PPB5 Dot B, 25, 28, and 31 disk harrows DSG90MSA

T56688 DC211TTR4 1 ½ sq. GW211PP4 K23B disk harrows

T57559 DS211TTR2 2 3⁄16 rd. GW211PPB2 DSG100MSA

Case IH and International Harvester

1251062C91 DS209TT2 1.7717 rd. W209PPB2 DS85MS

ST491A 1 ¾ rd.

ST627A DS211TT4 2.19 rd. 500 disks DS100MS

ST740B 2 3⁄16 rd. FD211RBA 500, 501, 596, 700, 770, MRX690, RMX370, RMX790

Chas Machine

DC208TT5 1 1⁄8 sq. W208PP5 Trencher

Chattanooga

DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

DS211TT6 1 ½ sq. W211PPB6 Levi, Levi-Dyke plow DS100MS

Deutz-Allis

DC211TT3 1 ½ sq. W211PP3 K7 disk

430478 DS209TT2 1.7717 rd. W209PPB Disk harrows DS85MS

430796 DS208TT7 1 3⁄16 rd. W208PP7 DS80MS

70583939 DS211TTR3 1 ½ sq. GW211PPB3 2600 disk DSG100MSA




Domries

K85 DC210TT2 1 15⁄16 rd. W210PP2 1 1⁄8-axle series

DC211TT3 1 ½ sq. W211PP3 1 ½-axle series

DMI

21842400 DS209TTR4 1.535 rd. GW209PPB4

Dunham

DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows (wide O.R.)

GK260 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows DS80MS

Eversman

261750 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

266740 DS208TT12 1 1⁄8 sq. W208PPB12

Ezee On

DS214TTR3 2.312 rd. GW214PPB3 Disk harrows

11504 DC214TTR3 2.688 rd. GW214PP3

10771 DS210TT2 1 15⁄16 rd. W210PPB2 DS90MS

1A64318 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows

1R41009 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

310072 DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS


7377-1 DS211TT3 1 ½ sq. W211PPB3 216 and 100 beet harvest DS100MS

EP5403 DC211TTR4 1 ½ sq. GW211PP4

EP6576 DS209TTR4 1.535 rd. GW209PPB4

G10771 DS210TTR2 1 15⁄16 rd. GW210PPB2 Disk harrows

G11078 DC210TTR4 1 1⁄8 sq. GW210PP4

FMC

15148 DC208TT10 1 ½ rd. W208PP10

15617 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows DS80MS

Ford

113903 DS209TT2 1.7717 rd. W209PPB2 204, 210, 224, 230 disks DS85MS

177849 DC210TT2 1 15⁄16 rd. W210PP2

7200460 DS209TTR2 1 ¾ rd. GW209PPB2 230, 201, 202, E, J, L disk harrows DSG85MSA

MULCB112SG DS211TT3 1 ½ sq. W211PPB3 236 cutting disks DS100MS

MULCBB112 DC211TT3 1 ½ sq. W211PP3 219, 223 cutting disks

NDAS4508BJ DS208TT5 1 1⁄8 sq. W208PPB5

SBP238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 241, 242M 243M 246 disk harrows DSG80MSA

SFL2042 DS211TTR13 1 ¾ rd. GW211PPB13 251 disk harrows DSG100MSA




Forest City

DC208TT5 1 1⁄8 sq. W208PP5 Ridgers

GANDM

DS210TT2 1 15⁄16 rd. W210PPB2 3-pt. vineyard disks DS90MS

Glencoe

YB8400 DS209TTR4 1.535 rd. GW209PPB4 Yield builder disk gangs and baskets

YB8500 FD209RB 1 ½ rd. DHU1-1/2R209 Yield builder disk gangs with riveted flange

Great Plains

822-208C FD209RB 1 ½ rd. DHU1-1/2R209 Ultra-till disk gangs, turbo-chopper baskets

822-209C FD209RK 1 ¼ sq. DHU1-1/4S209 Turbo-till tolling spike harrows

FD211RE 1 ¾ rd. DHU1-3/4S211 4360A, 5300A, 6360A, 7225A, 7300A, 9225A

Greenline

DS211TTR3 1 ½ sq. GW211PP3 Disk harrows DSG100MSA

Hardee

DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows

Hesston

700700613 FD209RB 1 ½ rd. DHU1-1/2R209 2540 soil saver

700710152 DS208TT6 1 sq. W208PPB6 Disk harrows DS80MS

Hester

DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows

Hiniker

DS211TTR2 2.19 rd. Coulter chisels DSG100MSA

IMCO

DS208TT12 1 1⁄8 sq. W208PPB12 Wheel disks

John Deere

A20175 1 1⁄8 sq. GW208PPB5 100, 110 disks

A20649 DS209TTR10 1 ¾ rd. GW209PPB11 210, 220, 230 disks DSG85MSA

AA14878 DC208TT8 1 1⁄8 sq. W208PP8 101 chisel plows, WDC, 23, 2FK, F871, F901, F902, F984, bedders

AK32778 DC211TT2 2.188 rd. W211PP2

AK33797 DC210TT 1 15⁄16 rd. W210PP10 80, 100, 225, 325, 414, 414A, 416, 1200, 1400, 2200, 2400, 3000, 4000

AK3892B DC208TT2 1 sq. W208K2-E9003 K, KBA, KBL, KBY, FW, RW, GR, GRL, disk harrows

AN240220 DS209TTR4 1.535 rd. GW209PPB4 Disk harrows with 1.535"-axle

AN240221 DS211TTR13 1 ¾ rd. GW211PPB13 Disk harrows with 1 ¾"-axle DSG100MSA

AW20540 DS208TT2A 1 ½ rd. W208PPB2 Disk harrows with 1 ½"-axle DS80MS

B34215 DS211TTR9 2 3⁄16 rd. GW211PPB9300, 310, 315, 330, 331, 335, 340, 350, 355, 360 disks; 1700, 1710, 1710

DSG100MSA

GZ379381 FD211RJA 1 15⁄16 rd. DHU11516R211 400, 600, 610, 810 harrows

JD8656 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrows with 2 3⁄16"-axle




JD8664 1 ¼ sq. W209PPB5 9000 drill, 4400 combine

JD8664 DS209TT8A 1 ¼ sq. W209PPB8 9000 drills, 4400 combines narrow O.R. brg. DSG85MSA

JD9248 DS208TT5 1 1⁄8 sq. W208PPB5 8500, F810H, F850H, 4, 5, and 6 tillers DS80MS

JD9338 HPC100GP 1 sq. 206KKR6 450, 515, 520, 8000 grain drills, 50 series corn head

JD9350 DC208TT5 1 1⁄8 sq. W208PP5 F871, F901, F984, F981, F982 bedders, 2700 BSN 1199

Johnson

275776 DS216TTR3 3 rd. GW216PPB3 Disk harrows

Kelly

05A51001 DS209TTR4 1.535 rd. GW209PPB4

06A51001 DS208TT5 1 1⁄8 sq. W208PP5 DS80MS

06A51-001 DC208TT5 1 1⁄8 sq. W208PP5 Coulters

Kent

FC0481 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows

Kewanee

B2055 DC211TT3 1 ½ sq. W211PP3 Disk harrows with 1 ½" axle

B2151 DS208TTR8 1 1⁄8 sq. GW208PPB8 100, 200, 170, 236, 300, 500, 600, 700, 900 series DSG80MSA

B2246 DS210TTR4 1 1⁄8 sq. GW210PPB4 1000, 1025, 1100, 1200 built before 1978 DSG90MSA

B2725 FD209RM 1 1⁄8 sq. DHU1-1/8S209 1000 series built after 1978, 1025, 1030, 1100, 1175 series

B3587 FD211RM 1 ½ sq. DHU1-3/4S211 1200 series

B3625 DC208TT10 1 ½ rd. W208PP10 Disk harrows

B7778 DS209TTR2 1 ¾ rd. GW209PPB2 209, 218 disk DSG85MSA

B7980/G0052604 DS208TT5 1 1⁄8 sq. W208PPB5 206, 400 disk DS80MS

B8018 DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows with 1 1⁄8"-axle

G1046244 DC211TTR2 2 3⁄16 rd. GW211PP2 Disk harrows with 2 3⁄16"-axle

G1046430 DC211TTR3 1 ½ sq. GW211PP3 Disk harrows with 1 ½"-axle

G1436183 DC208TTR17 1 1⁄8 sq. GW208PP17 Disk harrows with 1 1⁄8"-axle

King Plows

BB-2 7⁄8 sq. W208PPB11 CFB disk harrows

BB-2N DS208TT12 1 1⁄8 sq. E208PPB12 KGB, WGH, EZB, MFB, disk harrows

Krause

1927-11-0 CDS209TTR 1.530 rd. 1900-1928, 2135-2166, 2200, 4900 series rock flex

2410-11-0 CDS211TTR 1 ¾ rd. 2400 series rock flex gang

40102/P-212-10-2 DS208TT7 1 3⁄16 rd. W208PPB7 405-408 DS80MS

40-103/P350-10-1 DS210TT5 1 ¾ rd. W210PPB5 Disk harrows DS90MS

40-104/P412-10-2 DS209TT4 1.535 rd. W209PPB4408A-412, 610-629, 636-641, 900-908, 952-969, 1144-1156, 1401-1428, 1576-1592A, 1900-1928, 1952-1979, 2135-2166

DS85MS

40-105/612-10-2 DS209TTR4 1.535 rd. GW209PPB4 900-908, 952-969, 1144-1156, 1401-1428

40-109/1934-12-0 FD209RB 1 ½ rd. DHU1-1/2R2091590, 1576-1592A, 1900-1928, 1952-1979, 2100-2166, 2190-2196, 2200-2244, 3948-3957, 3990-3994, 4900-4945, 4900A-4927A, 4950-4994




40-114 FD211RE 1 ¾ rd. DHU1-3/4S211 1740-1767, 2400-2495, 4995, 5812-5824

40-119 DS209TTR6P 1.530 rd. Disk harrows

2410-11-0/40-173 DS211TTR23 1 ¾ rd. GW211PPB21 1740-1767, 2400-2495, 5812-5824 DSG100MSA

40-128 FD209RK 1 ¼ sq. DHU1-1/4S209 Disks with 1 ¼"-axle

612-10-2 DS209TTR4 1.535 rd. GW209PPB4 Disk harrows

Landoll

1065010003 DS209TTR4 1.535 rd. GW209PPB4

1065010011 FD209RB 1 ½ rd. DHU1-1/2R209 Weather proofer disk gang, harrows

140464 DC211TTR21 1 ¾ rd. GW211PP25 6230, 7410VT, 7430VT, 7431VT, 7450VT

DS211TTR23 1 ¾ rd. GW211PPB21 8300 weather proofer DSG100MSA

Lillisont

37-61-001 DS208TT12 1 1⁄8 sq. W208PPB12

40-61-001 DS209TT7 1 ¼ sq. W209PPB7

40-61-005 DS209TTR8 1 ¼ sq. GW208PPB8 DSG85MSA

Lockwood

202112 DC208TT10 1 ½ rd. W208PP10

Long

9-90092 DS208TT12 1 1⁄8 sq. W208PPB12 958, 959 disks

9-90093 7⁄8 sq. W208PPB11 953, 956 disks

9-90155 DS209TT7 1 ¼ sq. W209PPB7 Disk harrows

9-90241 DS211TT6 1 ½ sq. W211PPB6 958, 959, 960, 1090, disk harrows DS100MS

9-92088 DS211TTR3 1 ½ sq. GW211PPB3 DSG100MSA

MANDW

2436003 DC211TTR3E 1 ½ sq. Earthmaster

Massey Ferguson

1905678M1 DC211TT3 1 ½ sq. W2112PP3 Disk harrows with 1 ½"-axle

447899M1 DS208TT12 1 1⁄8 sq. W208PPB12 34MTD and 33 rev. disks

449432M1 DS211TTR3 1 ½ sq. GW211PPB3 30, 40, 520, 620, 720 disk harrows DSG100MSA

8311103M1 832634M2 DS208TT2A 1 ½ rd. W208PPB2 36, 52, 75 disk harrows DS80MS

831960M3 DS210TT2 1 15⁄16 rd. W210PPB2 Plows DS90MS

832540M1 DS211TT3 1 ½ sq. W211PPB3 38 41 42 disk harrows DS100MS

834367M1 1025130M1 DS208TT6 1 sq. W208PPB6 21 disk harrows

835050M1 DS209TT2 1.7717 rd. W209PPB2 28, 33, 34, 39, 68 disk harrows DS85MS

842303M1 1 ¼ sq. W209PPB5 520, 620, 820 disk harrows

842323M1 1066086M1 DS209TTR5 1 ¼ sq. GW209PPB5 520, 620, 820 disk harrows-relube bearings DSG85MSA

843638M1 1905666M1 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows with 1 1⁄8" axle DS80MS




McClesky

DS208TT12 1 1⁄8 sq. W208PPB12 F228, L150 harrows

McFarlane

RT2274 DS211TTR3 1 ½ sq. RD4000 BSN 12946, RT2000, RT3000 DSG100MSA

RD4498 FD211RM 1 ½ sq. RD4000 ASN 12947

DRB3826 FD209RB 1 ½ rd. RD4000 rolling basket ASN 12756

Melroe

6510628 DC211TT3 1 ½ sq. W211PP3

6519831 DS208TT6 1 sq. W208PPB6 DS80MS

Midland

15620 DS209TTR8 1 ¼ sq. GW209PPB8 Disks DSG85MSA

Miller

4000044 DS211TTR13 1.785 rd. GW211PPB13 Series I, II and heavy-duty disks with 24"- and 26"-disks DSG100MSA

4000005 DS211TTR2 2.19 rd. GW211PPB2 Early models with cast spools DSG100MSA

Minn-Moline

DC208TT5 1 1⁄8 sq. W208PP5 Hipper, ridger

20H2152 DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS

20H5836 DS208TTR6 1 sq. GW208PPB6 KA disk harrows DS80MS

Multi-Purpose

DC208TT5 1 1⁄8 sq. W208PP5 Ridger

42424 7⁄8 sq. W208PPB11

New Holland

276882 DS209TTR2 1 ¾ rd. GW209PPB2 DSG85MSA

NDAS4508BJ DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

NDAS4508FF DS208TT13 7⁄8 sq. W208PPB13 DS80MS

SPB238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 DSG80MSA

Oliver

237092B DS208TT7 1 3⁄16 rd. W208PPB7 241, 352, 250 series wheel disk harrows DS80MS

238481B DS208TTR5 1 1⁄8 sq. GW208PPB8 263 disks DSG80MSA

30-1005197 DS208TT5 1 3⁄16 rd. W208PPB7 DS80MS

Pico

4404-P DC211TT3 1 ½ sq. W211PPB3 HD Levee plows, WO series disk harrows DSG85MSA

744-P DC208TT5 1 1⁄8 sq. W208PPB5 LO, 175, 185, 200, 206, 250, 300, LT400, 720

Piper

DC208TT5 1 1⁄8 sq. W208PP5 Disk harrows and ridger

1 ¼ sq. W209PPB5 Do-all




Rome

DS208TT12 1 1⁄8 sq. W208PPB12 7 ½ disk harrows

Shaffer

DS209TT2 1.7717 rd. W209PPB2 Disk harrows DS85MS

DS210TT2 1 15⁄16 rd. W210PPB2 Disk harrows DS90MS

Strathmore

3055 DC210TT2 1 15⁄16 rd. W210PP2

3056 DS210TT2 1 15⁄16 rd. W210PPB2 DS90MS

Southern

DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows, 13"-pulverizing disks

Sunflower

1186 DS208TT7 1 3⁄16 rd. W208PPB7 DS80MS

1829 DS209TTR4 1.535 rd. GW209PPB4

2042 DS211TTR13 1 ¾ rd. GW211PPB13 Disk harrows DSG100MSA

24A5301 DS208TT5 1 1⁄8 sq. W208PPB5 DS80MS

SN3091 DC211TTR21 1 ¾ rd. GW211PP25

Disks 1130, 1211, 1212, 1231, 1232, 1233, 1234, 1321, 1331, 1431, 1432, 1433, 1434, 1435, 1441, 1442, 1443, 1444, 1541, 1543, 1544, 1550, 6630, 6631, disk rippers 4306, 4310, 4311, 4410, 4411, 4511, soil conditioners 7212, 7232, 7252

FK311007 FD209RK 1 ¼ sq. DHU1-1/4S209 Disk harrows

YYB3471 FD209RM 1 1⁄8 sq. DHU1-1/8S209 Disk harrows

Talbot

T151 DS208TT8 1 1⁄8 sq. W208PPB8 DS80MS

Taylor

DS209TTR5 1 ¼ sq. GW209PPB5 Disk harrows DSG85MSA

204147 DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows light duty, 12 ½, 19, 21

204147G DS208TT12A 1 1⁄8 sq. W208PPB19 Disk harrows

204679 DS211TT6 1 ½ sq. W211PPB6 Disk harows, extra heavy duty DS100MS

206090 7⁄8 sq. W208PPB11 Disk harrows

207022 DS211TTR3 1 ½ sq. GW211PPB3 Disk harows, heavy duty DSG100MSA

207359 DS208TTR8 1 1⁄8 sq. GW208PPB8 200000, series disks DSG80MSA

34392 DS208TT13 7⁄8 sq. W208PPB13 DS80MS

606793 DC208TT5 1 1⁄8 sq. W208PP5

Towner

7906 DS208TT8 1 1⁄8 sq. W208PPB8 101 ridgers DS80MS

7992 DC208TT5 1 1⁄8 sq. W208PP5 100, 101 ridger

15013 DS208TT12 1 1⁄8 sq. W208PPB12 101 ridgers, 420, 425 disks

18300 DS211TT6 1 ½ sq. W211PPB6 510, 515, 577, 532, 534, 535, 560, 600, 620, 621, 630 DS100MS




Tufline

T60 DS208TT5 1 1⁄8 sq. W208PPB5 Disk harrows, 1 1⁄8 gang bolts DS80MS

T602 DS208TT12 1 1⁄8 sq. W208PPB12 Disk harrows, 1 1⁄8

T603 7⁄8 sq. W208PPB11 Disk harrows with 7⁄8 gang bolt

Tye

552207 DS208TT6 1 sq. W208PPB6 DS80MS

552209 DC208TT5 1 1⁄8 sq. W208PP5

Unverferth


91134 FD209RB 1 ½ rd. DHU1-1/2R209 Disk harrows

Wanda MFG

481202 DC208TT5 1 1⁄8 sq. W208PP5 Ridger and more

481213 DC211TTR3 1 ½ sq. GW211PP3

481217 DC208TTR17 1 1⁄8 sq. GW208PP17

White

213778B 1 1⁄8 sq. GW208PPB5 Disk harrows with 1 1⁄8"-axle

237092B DS208TT7 1 3⁄16 rd. W208PPB7 251, 252, 253 DS80MS

237909B DS211TTR3 1 ½ sq. GW211PPB3 265, 281 DSG100MSA

238799B FD209RM 1 1⁄8 sq. DHU1-1/8S209 LATE 271, 272 disks

408808D DC210TT2 1 15⁄16 rd. W210PP2 Disk harrows with 1 15⁄16"-axle

W238481B DS208TTR8 1 1⁄8 sq. GW208PPB8 254, 255, 256 DSG80MSA

W238813 FD209RB 1 ½ rd. DHU1-1/2R209 273, 274

Wilrich

24022 DS211TTR2 2 3⁄16 rd. GW211PPB2 Disk harrows DSG100MSA

24677 DC208TTR17 1 1⁄8 sq. GW208PP17

25703 FD211RM 1 ½ sq. DHU1-1/2S211 Disk harrows

30185 FD211RJA 1 15⁄16 rd. DHU11516R211 Do-all seed bed, 1400, 1403

34002 DS209TT4 1.535 rd. W209PPB4 DS85MS

26

VERTICAL TILLAGE – ALL-MAKES

VERTICAL TILLAGE – ALL-MAKES

ALL-MAKES EARTH METAL® COULTERS

17.2-INCH X 4.5-MMPART NO. 87400930

Application: Salford RTS• More aggressive 8-wave design stands up to rugged high-speed

applications, cuts and distributes the soil to prepare the soil bed

20-INCH X 4.5-MMPART NO. 73340375

Application: Salford RTS• Very aggressive 8-wave design stands up to rugged high-speed


18-INCH X 4.5-MMPART NO. 87400936

Application: Salford RTS• Less aggressive 13-wave design stands up to rugged high-speed


20-INCH X 4.5-MMPART NO. 87400937

Application: Salford RTS• Less aggressive 13-wave design stands up to rugged high-speed


22-INCH X 4.5-MMPART NO. 73341695

Application: Salford RTS• Very aggressive 8-wave design stands up to rugged high-speed


22-INCH X 6.5-MMPART NO. 73341304

Application: Landoll Vertical Tillage

• Full concavity with R46 center (1.765"/1.826" diameter)• Interchangeable with Landoll part no. 155617

ALL-MAKES EARTH METAL COULTER FOR LANDOLL VT PLUS

SALFORD IS A REGISTERED TRADEMARK OF ©SALFORD FARM MACHINERY LTD.LANDOLL IS A REGISTERED TRADEMARK OF ©LANDOLL CORPORATION

REVERSIBLE POINTS FOR CHISEL PLOWS

14" 2" 5⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 5787

15 ¾" 4 ½" 5⁄16" 2 2 ¼" to 2 ½" ½" no. 3 plow (2) Chisel 602595R3

15 ¾" 4 ½" 5⁄16" 2 2 ¼" to 2 ½" ½" no. 3 plow (2) Chisel 602595R3N

16" 2" 5⁄8" 2 2 ¼" to 2 ½" 7⁄16" no. 3 plow (2) Chisel 87589836

16 7⁄8" 2" 5⁄8" 2 2 ½" ½" no. 3 plow (2) Chisel 601986R1

16 7⁄8" 2" 5⁄8" 2 2 ½" ½" no. 3 plow (2) Spike 602594R1

18" 2" 1" 2 2 ½" Hex ½"x 2 ¾" Chisel 193054A1

19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93368

19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93369*

19 ½" 2" 7⁄8" 2 2 ½" Hex ½" x 2 ½" Chisel B93370

*USE ON HIGH CLEARANCE SHANKS ONLY.

LENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.

POINTS AND SHOVELSChoose from a complete line of shovels and points—manufactured from durable, high-carbon steel and uniformly heat-treated for superior wear and toughness. They are available in single and double points, heavy-duty spikes, chisels, twisted shovels and heavy-duty, double-pointed shovels.

TWISTED SHOVELS FOR CHISEL PLOWSLENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.

21 ½" 3" 3⁄8" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, V point 594545R1

21 ½" 3" 3⁄8" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, V point 594546R1

22" 3" ½" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, V point B95242

22" 3" ½" 5 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, V point B95243

26 ½" 3 ½" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, slash point 812384C3

26 ½" 3 ½" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, slash point 812385C3

26 ½" 4" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) L.H. twist, slash point 1995505C1

26 ½" 4" ½" 4 2 ¼" to 2 ½" ½" no. 3 plow (2) R.H. twist, slash point 1995506C1

PART NO. B95242

REVERSIBLE SHOVELS FOR CULTIVATORS

6 7⁄8" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 594227R1**

8" 2" 3⁄16" 1 - 3⁄8" no. 3 plow (2) Chisel 25332BA

10" 2 ½" 5⁄16" 2 1 ¼"-2 ¼" 7⁄16" no. 3 plow (2) Chisel 130384

10 1⁄8" 1 ¾" ¼" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 596623R1

11" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 87546271

11" 2 ½" ¼" 2 2"-2 ¼" 7⁄16" special sweep (2) Chisel 25702BA

11 ½" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 811799C3

11 ¾" 2" 3⁄8" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel-flared ends 86990834

12" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 811889C1

14" 2" 5⁄16" 2 1 ¾" 7⁄16" no. 3 plow (2) Chisel 547188R2

**SINGLE POINT, NOT REVERSIBLE

LENGTH SIZE WIDTH THICKNESS NO. OF HOLES HOLE SPACING BOLTS USED STYLE PART NO.

DEEP TILLAGE 27

DEEP TILLAGE

CHISEL PLOW SWEEPS

CHISEL PLOW SWEEPS28

OLDER NEW HOLLAND MODELS AND SOME ALL-MAKES APPLICATIONS

SIZE THICKNESS PART NO. HOLE SPACING STEM ANGLE

8" ¼" 1547105C1 2 ¼" to 2 ½" 43°

10" ¼" 1547106C1 2 ¼" to 2 ½" 43°

12" ¼" 1547107C1 2 ¼" to 2 ½" 43°

14" ¼" 1547108C1 2 ¼" to 2 ½" 43°

16" ¼" 1547109C1 2 ¼" to 2 ½" 43°

18" ¼" 1547110C1 2 ¼" to 2 ½" 43°

12" 5⁄16" 248517A1 2 ¼" to 2 ½" 43°

14" 5⁄16" 248518A1 2 ¼" to 2 ½" 43°

16" 5⁄16" 248519A1 2 ¼" to 2 ½" 43°

18" 5⁄16" 248520A1 2 ¼" to 2 ½" 43°

CURRENT NEW HOLLAND MODELS AND MOST ALL-MAKES APPLICATIONS

SIZE THICKNESS PART NO. HOLE SPACING STEM ANGLE

8" ¼" 133765A1 2 ¼" to 2 ½" 50°

10" ¼" 133766A1 2 ¼" to 2 ½" 50°

12" ¼" 133767A1 2 ¼" to 2 ½" 50°

14" ¼" 133768A1 2 ¼" to 2 ½" 50°

16" ¼" 133769A1 2 ¼" to 2 ½" 50°

18" ¼" 133770A1 2 ¼" to 2 ½" 50°

12" 5⁄16" 248523A1 2 ¼" to 2 ½" 50°

14" 5⁄16" 248524A1 2 ¼" to 2 ½" 50°

16" 5⁄16" 248525A1 2 ¼" to 2 ½" 50°

18" 5⁄16" 248526A1 2 ¼" to 2 ½" 50°

New Holland chisel

plow sweeps have

2 ¼-inch – 2 ½-inch

combination hole

centers with ½-inch

bolt holes. To

accommodate

chisel plows with 7⁄16-inch bolt holes,

use adapter bolt,

part no. 594243R1

(bolt has ½-inch

head and 7⁄16-inch

shank).

CHISEL PLOW (WHEATLAND) SWEEPS APPLICATION CHART

EARTH METAL CHISEL PLOW SWEEPS

MAKE/MODELHOLE SIZE

HOLE CENTERS

STEM ANGLE

Allis Chalmers 22" – 32" 7⁄16" 2 ¼" 43°

Anderson 7⁄16" 2 ¼" 50°

Brady 7⁄16" 2 ¼" 50°

CASE (some) ½" 2 ¼" 47°

CASE (later models) 7⁄16" 2 ¼" 50°

Case IH and IH ½" 2 ½" 43°

C.C.I.L. 1" thick shank 7⁄16" 2 ¼" 50°

C.C.I.L. 1-¼" thick shank ½" 2 ½" 43°

Crown ½" 2 ¼" 50°

DMI ½" 2 ¼" 50°

Degelmen 7⁄16" 2 ¼" 50°

Edwards 7⁄16" 2 ¼" 50°

Flexi-Coil (2" x 1" shank) ½" 2 ¼" 50°

Ford ½" 2 ¼" 47°

Ford 131 7⁄16" 2 ¼" 50°

Friggstad 7⁄16" 2 ¼" 50°

Glencoe ½" 2 ¼" 47°

Glencoe (high clearance) 7⁄16" 2 ¼" 50°

Graham (high clearance) 7⁄16" 2 ¼" 50°

Hiniker ½" 2 ¼" 50°

Ingham 7⁄16" 2 ¼" 43°

Jeoffery – 16" 7⁄16" 2 ¼" 50°

Jeoffery – 22" – 32" 7⁄16" 2 ¼" 43°

John Deere 7⁄16" 2 ¼" 50°

John Deere (some) ½" 2 ¼" 47°

Kewanee 7⁄16" 2 ¼" 50°

MAKE/MODELHOLE SIZE

HOLE CENTERS

STEM ANGLE

Kilbery 7⁄16" 2 ¼" 50°

Krause (low clearance) ½" 2 ¼" 47°

Krause (high clearance) 7⁄16" 2 ¼" 50°

Leon ½" 2 ¼" 50°

Massey Harris 7⁄16" 2 ¼" 43°

Massey “Trash King” 7⁄16" 2 ¼" 50°

Mel-Cam 7⁄16" 2 ¼" 50°

Mel-Cam Cultiweeder 7⁄16" 2 ¼" 43°

Case IH – 5800 C.P. ½" 2 ½" 50°

Melroe (Clark) ½" 2 ¼" 47°

Minneapolis Moline T600, 1500, 1800

7⁄16" 2 ¼" 50°

Morris 220 7⁄16" 2 ¼" 43°

Morris MP 912 and Magnum ½" 2 ¼" 50°

Noble XR-20 7⁄16" 2 ¼" 50°

Oliver 247, 248, 347 U.S. 7⁄16" 2 ¼" 43°

Oliver 500, 3500 7⁄16" 2 ¼" 43°

Robin-Nodwell 7⁄16" 2 ¼" 50°

Rogin 7⁄16" 2 ¼" 50°

Roll-O-Cone ½" 2 ¼" 50°

Roll-O-Flex 7⁄16" 2 ¼" 50°

Schulte 300 ½" 2 ¼" 50°

Sunflower 7⁄16" 2 ¼" 50°

Versatile 7⁄16" 2 ¼" 50°

Victory 7⁄16" 2 ½" 50°

Wil-Rich ½" 2 ½" 43°

Wil-Rich (early) 7⁄16" 2 ¼" 43°

Long-life, true-width, low-crown design; constant-width wing design maintains cutting width longer that conventional wing sweeps; low-crown for reduced draft and excellent residue flow.

CHISEL PLOW SWEEPS

CHISEL PLOW SWEEPS 29

NON-EARTH METAL® MISCELLANEOUS CHISEL PLOW SWEEPS


87589822 14" ¼" 50° 2 2 ¼" ½"

4499 16" ¼" 50° 2 2 ¼" ½"

DART CHISEL PLOW SWEEPS


9686 12" ¼" 50° 2 2 ¼" ½"

5785 16" ¼" 50° 2 2 ¼" ½"

294957A1 22" ¼" 43° 2 2 ½" ½"

PENETRATOR DART CHISEL PLOW SWEEPS

PART NO. SIZE THICKNESS ANGLE

87515418 2" ¼" 47°

21460 4" ¼" 47°

21461 5 ½" ¼" 47°

9026 9" ¼" 47°

8503 11" ¼" 47°

SLIMWEDGE™ QUICK CHANGE CHISEL PLOW SWEEPS

QUICK CHANGE ADAPTERPART NO. 87625317

COULTERS

COULTERS30

EARTH METAL® COULTERSYour New Holland dealer offers a full line of fluted, wavy, and straight coulters—allowing for implement customization

to match any trash-cutting requirements, and soil and speed conditions. What’s more, they’re made from durable

Earth Metal steel, making them the toughest coulters on the market.

8 wave deep 87400930 17.6 4.5 4 4 5.25 (133.4) 1.85 (47) Rawson, Salford

73340375 20 4.5 4 4 5.25 (133.4) 2.17 (55) Salford

73341695 22 5 4 5 5.25 (133.4) 2.3 (58) Salford - NEW

8 wave 130800A2 14.3 4 4 8 5 (127) 0.75 (19)

87400932 15.8 4 4 8 5 (127) 0.87 (22) Kinze DG7803

87400933 17.6 4 4 8 5 (127) 1 (26) Great Plains 820-019C

140447A2 18.1 4 4 8 5 (127) 1.06 (27)

13 wave 87400934 14.3 4 4 8 5 (127) 0.63 (16)

87400935 15.8 4 4 8 5 (127) 0.63 (16) Kinze GD9254

87298834 16 4 4 4 5.25 (133.4) 0.63 (16) Kinze GD9255

129195A2 17.6 4 4 8 5 (127) 0.75 (19) Great Plains 820-082C

87400941 17.6 4 3.78 6 5 (127) 0.78 (20)

87400936 18 4.5 4 8 5 (127) 0.75 (19) Salford

87400937 20.4 4.5 4 8 5 (127) 0.87 (22) Salford

443637A1 22 4.5 3.65 4 5 (127) 1.2 (30)

20 wave 87299953* 16 4 4 4 5.25 (133.4) 0.35(9) Kinze, Deere, Great Plains

25 wave 87413627 14.33 4 4 8 5 (127) 0.59 (15)

431542A1* 14.7 4 4 4 5.25 (133.4) 0.63 (16) Yetter 2571-166

87413628 15.8 4 4 8 5 (127) 0.63 (16) Krause 30-228

321165A2 17.6 4 4 8 5 (127) 0.63 (16) Yetter 2571-179

Bubble fluted 140450A2 15.8 4 4 8 5 (127) 0.75 (19) Kinze GD7804

COULTER TYPE PART NO.

DIAMETER (IN.)

THICKNESS (MM)

CENTER HOLE DIA. (IN) NO. OF HOLES

BOLT CIRCLE (INCHES/MM)

CUTTING WIDTH (IN/MM) TYPICAL USES

Straight coulter disk

87584040 15 5 1 ½ 4 4 (101.1) Straight

31399R1 17 4 1 ½ 4 4.5 (114.3) Rippled

1344516C1* 17 4 4 4 5.25 (133.4) Rippled Yetter 2571-158

87299128 17 4.5 2 6 3.5 (88.9) Notched Kinze GD12676

SBP220303B* 18.1 4 4 4 5.25 (133.4) Rippled White/Ford Plows

141205C2 18.4 4 2.6 4 4.25 (108) Straight

443627A1 20.4 4.5 3.6 4 5 (127) Rippled

443626A1 20 4.5 3.6 4 5 (127) Straight

28341R1 20.4 4.5 1 ½ 4 4.5 (114.3) Rippled

T54196 20.4 4.5 4 4 5.25 (133.4) Rippled White/Ford Plows

SBP219537B* 20 4.5 3.5 4 5.25 (133.4) Rippled White/Ford Plows

122567C1 22.6 4.5 1 ½ 4 4.5 (114.3) Rippled

443635A1 22.6 4.5 3.6 4 5 (127) Straight

443638A1 24.8 4.5 3.6 4 5 (127) Straight

COULTER TYPE PART NO.DIAMETER

(IN.)THICKNESS

(MM)CENTER HOLE

DIA. (IN) NO. OF HOLESBOLT CIRCLE (INCHES/MM)

EDGE TYPICAL USES

*NOT EARTH METAL

COULTERS

COULTERS 31

Straight coulter disk (two sets of holes) 87400939 16 4 4

4 5 (127)

8 5.25 (133.4)

140445A2 17 4 44 5 (127)

8 5.25 (133.4)

Straight coulter (center hole only)

812362C1 20.4 4.5 1.25 - -28597R1 20.4 5 1.5 - -790-1002 20.4 6.5 1.5 - -

COULTER TYPE PART NO.DIAMETER

(IN.)THICKNESS

(MM)CENTER HOLE

DIA. (IN) NO. OF HOLESBOLT CIRCLE (INCHES/MM)

PLOW THROUGH THE FIELD IN NO TIMEWhen it comes to seedbed preparation, we are the perfect partner—helping you find the right tool for your application. We offer an extensive line of durable, high-performance moldboards, shares, shins and landsides that can cut your plowing work in half. Only we have access to a full line of parts for plows that will keep you moving this harvest.

MOLDBOARD PLOWS

MOLDBOARD PLOWS32

MOLDBOARDS

MAKE DESCRIPTIONPLOW

BOTTOM PART NO.

Ford 14" general purpose R.H. 251440DS

Ford16" general purpose - R619 series

R.H. 251441DS


Ford18" general purpose - R619H series

R.H. 251443DS

Ford18" general purpose - R619 series

R.H. 251444DS

Ford 18" general purpose L.H. 251574DS

IH/Case IH 14" R.H. ST462313DS

IH/Case IH 16"-18" R.H. ST462314HXDS

Massey Ferguson 16"-18" heavy duty R.H. ST660204DS

White/Oliver 16" R.H. 251441DS



Wil-Rich 16"- 18" R.H. ST14258

PLOW SHARES


BOTTOM PART NO.

2- AND 3-BOLT SHARES

Ford 12" R.H. 251419DS

Ford 14" R.H. 251421DS

Ford 16" R.H. 251424DS

4-BOLT SHARES

Ford 12" R.H. 251422DS

Ford 14" heavy duty R.H. 251423DS

Ford 16" short, heavy curve R.H. 251430DS

Ford 16" R.H. 251426DS

Ford 16" heavy curve R.H. 251427DS

Ford 16" heavy duty R.H. 251428DS

Ford 16" heavy curve L.H. 251565DS

Ford 16" heavy duty L.H. 251429DS

IH/Case IH 14" full upset R.H. ST463236R1



IH/Case IH 16" deep suck R.H. ST463253R1

IH/Case IH 18" deep suck R.H. ST463254R1

IH/Case IH 18" deep suck L.H. ST464591R1



Massey Ferguson 16" ribbed R.H. STMF164RSDS

Melroe/Morris 18" for 806 RR Plows R.H. STP6526829

Melroe/Morris 16" for 806 RR Plows R.H. STP6526832

White/Oliver 18" full curve L.H. 251566DS

White/Oliver 16" full, heavy curve R.H. 251427DS

White/Oliver 16" narrow, heavy curve R.H. 251430DS

White/Oliver 16" hard-surfaced, heavy curve R.H. 251427HDS

White/Oliver 16" heavy curve R.H. STRD16RDS

Wil-Rich 18" R.H. ST14255

5-BOLT SHARES

Ford 18" heavy curve R.H. 251431DS

Ford 18" short, heavy curve R.H. 251434DS

Ford 18" heavy curve L.H. 251566DS

White/Oliver 18" full, heavy curve R.H. 251431DS

White/Oliver 18" narrow, heavy curve R.H. 251434DS

White/Oliver 18" hard-surfaced, heavy curve R.H. 251431HDS

White/Oliver 18" hard-surfaced, heavy curve L.H. 251566HDS

MOLDBOARD PLOWS

MOLDBOARD PLOWS 33

LANDSIDES / WEARPADS


BOTTOM PART NO.

Ford9 3⁄8" long with 7⁄16" bolt

Front R.H. 251448DS

Ford15 1⁄8" long with 7⁄16" bolt

Rear R.H. 251449DS

Ford14"-16"-18" landside

R.H. 251578DS

FordLandside pad for 251578DS

251579DS

IH/Case IH4 ½" x 5⁄8" x 12 5⁄8" landside

R.H. ST59057C1

IH/Case IH4 ½" x 6" landside pad

ST59058C1

Massey Ferguson 12"x 9⁄16" landside R.H. ST475937HXDS

Melroe/Morris ½" x 6" landside pad for 806 RR plows

STP6526852

White/Oliver 9⁄16" x 5" x 9⁄16" flat landside

251578DS

White/Oliver 7 ½" x ½" landside pad

251579DS

Wil-Rich 12" x 9⁄16" landside ST14253

Wil-Rich4 ½" x ½" x 6" landside pad

ST14256

PLOW SHINS


BOTTOM PART NO.

Ford 12" through 18" RH R.H. 251435DS

Ford14"-16"-18" general purpose - R619 series

R.H. 251437DS


Ford14"-16"-18" general purpose - R619 series

L.H. 251571DS

IH/Case IH 14"-16"-18" R.H. ST522325R12

Massey Ferguson 14" through 18" R.H. ST660020HXDS

Melroe/Morris 16"-16"-18" for 806 RR Plows

R.H. STP6522182

White/Oliver 12" through 18" R.H. 251437DS

White/Oliver 12" through 18" L.H. 251571DS


Wil-Rich 16"- 18" R.H. ST14257

PART NO. STHS151DS

TRASHBOARDS

DESCRIPTION PART NO.

Case, Ford, Morris, Wil-Rich STHS151DS



EARTH METAL® DISK OPENERS FOR ALL-MAKESTRUST ONLY THE BEST FOR YOUR PLANTER OR DRILL

PLANTERS – OPENERS

HEAVY-DUTY DISK OPENER ASSEMBLY FOR KINZE PLANTERSPART NO. 428354A1

Application: Opener Disk Assembly – H.D.Size: 381mm (15") x 3.5mmManufacturer Part No. Reference: Kinze GA8324

TOP SELLER TO FIT GREAT PLAINS MODELSPART NO. 416443A1

Application: Opener Disk Assembly FlangeSize: 343mm (13-1/2") x 3mmManufacturer Part No. Reference: Great Plains 107-054S

HEAVY-DUTY DISK OPENER TO FIT SUNFLOWER & AG COPART NO. ZSN18358

Application: Opener Disk AssemblySize: 381mm (15") x 3.5mmManufacturer Part No. Reference: Sunflower/Agco SN9753N

PLANTERS – OPENERS34



PART NO. APPLICATION SIZE MANUFACTURER PART NO. REFERENCE ONLY

416443A1 Opener disk assembly 343mm (13 ½") x 3mm Lillison-Melrose 6603280/1

416010A1 (bearing kit 435483A1) Opener disk blade only 381mm (15") x 3.5mm Sunflower-Best 7176/DR800008

416015A1 (bearing kit 435483A1) Opener disk blade only 330mm (13") x 3mm Marliss, Sukup, Best, M&W

416442A1/B1980615C1 Opener disk 343mm (13 ½") x 3mm Tye-Uft 540-647/012

416015A1 (bearing kit 435483A1) Opener disk blade only 330mm (13") x 3mm Marliss-Sukup-M&W 701010

416442A1/B1980615C1 Opener disk assembly 343mm (13 ½") x 3mm Krause 5250-484-OALH

410526A1 Opener disk assembly 343mm (13 ½") x 3mm 5250-484-OARH

416442A1 Opener disk assembly L.H. 343mm (13 ½") x 3mm Crustbuster 863597LH

416442A1 Opener disk assembly R.H. 343mm (13 ½") x 3mm 863597RH

B500276 Opener disk assembly lead 381mm (15") x 3mm 859090

416443A1 Opener disk blade only plain 343mm (13 ½") x 3mm 863597

435480A1 Bearing kit (2 bearings and bolts) 400580/401042

141464C92 Opener disk assembly Fert. 343mm (13 ½") x 3mm John Deere AA27458

B500276 Opener disk assembly (AA20242) 381mm (15") x 3mm AA37474

133480A1 (bearing kit 419594A1) Opener disk – J.D. 750/1850 460mm (18 1⁄10") x 5mm Deere N283804

428354A1 Opener disk assembly – H.D. 381mm (15") x 3.5mm Kinze GA8324

B500276 Opener disk assembly 381mm (15") x 3mm GA2013

416443A1/B1980616C1 Opener disk assembly. New flange 343mm (13 ½") x 3mm Great Plains 107-054S

ZSN18358 Opener disk assembly 381mm (15") x 3.5mm Sunflower/Agco SN9753N

84389196 Disk assembly 356mm (14") x 3.5mm 800-955 Case IH planters

84389195 Disk assembly 356mm (14") x 3.5mm 800-955 Case IH planters

1344911C3 Opener disk assembly 366mm (14") x 2.5mm 5300, 5400, 5500 Case IH drills

603020R92 Grain drill opener disk assembly 14" x 3mm 5100, 5200, 6200, 6300, IH 10, 100, 510, 620

ALL-MAKES – EARTH METAL® OPENER ASSEMBLIES

PART NO. APPLICATION SIZE

84398745 Disk assembly 356mm (14") x 3.5mm




141464C92 Fertilizer opener disk assembly 343mm (13 ½") x 2.5mm

1277891C91 Covering disk assembly 8" x 2mm

EARTH METAL® OPENER ASSEMBLIES FOR NEW HOLLAND SP PLANTERS

35

MINI HOPPER ENHANCEMENT KITSPART NO. 47532784 PART NO. 47556260 (SPLIT ROW)Application: SP580

• An easy-to-assemble, quick-attach snorkel that slows down seeds to prevent clogging.

• Fills automatically for normal field operation and manually for plot-planning

• Mini hopper enhancement kit tool sold separately (part no. 47532734)

NEW

• Places seed 1 inch above and 1 inch beside the fertilizer

• Wing forces soil into the fertilizer trench to provide separation from seed

• Can be used with all press wheels• Available in standard or long-life

carbide

SIDE BAND

PART NO. DESCRIPTION

Standard Carbide

87506407 22846 LH sideband

87506409 22847 RH sideband

AIR HOE DRILLS – STEALTH OPENERS

AIR HOE DRILLS – STEALTH OPENERS

The Stealth opener is a modular system that adds versatility to your row seeding. A choice of tips or attachments mount to the main body. Replaceable tips promote long-life and customization.

STEALTH® OPENERS

Stealth openers use replaceable tips that work for both narrow-row and spread-row seeding styles.

SINGLE SHOOT

Stealth double-shoot attachments allow one-pass placement of seed and fertilizer. Seed/fertilizer separation prevents seedling damage.

DOUBLE SHOOT

36


Standard Carbide

87506287 87505195 Gumbo

87506283 87506293 Standard

KNIFE TIPS• Low soil disturbance• Very narrow spread of 7⁄8 to 1 inch• For use with any press wheel• Heavy-duty, gumbo or carbide tips

match soil condition.

• Seed is placed 1 inch above and 1 to 2 ½ inches on both sides of the fertilizer

• 3-inch size available in HS format for heavy soils and gumbo, and in LS format for light soils and sandy loam

• 3-, 4- and 5-inch sizes available in carbide for extended wear that helps to maintain integrity of seedbed over the full life of the opener; designed to force soil into the fertilizer trench, providing separation from the seed

• For use with press wheels that match row widths

PAIRED ROW


Standard Carbide

87506291 87506295 3-inch paired row

87506292 N/A 3-inch paired row light soild

87506261 22848 4-inch paired row

87506294 22849 5-inch paired row

SPREAD TIPS• Designed for low-disturbance

seeding• Wider product spread allows more

fertilizer to be placed with the seed• Spread tips are available in

3-, 4- or 5-inch sizes• For use with press wheels that

match row widths


Standard Carbide

84193957 84193966 3-inch spread

84193961 84193981 4-inch spread

87506290 87563695 5-inch spread

PART NO. 87506290

The rugged C-shank and trip design allow for use with a wide range of opener styles. Choose 350-pound trips for most soil types, or 550-pound trips for rugged conditions and double-shoot applications. Mount an optional one-bar, ½-inch tine harrow behind the rear shanks for added leveling and row closing.

AIR HOE DRILLS – SEED METERING AND TRIPS

PART NUMBER

# OF RUNS EXTRA FINE FINE COARSE EXTRA COARSE

2 GL-512S.1 GL-522S.1 GL-532S.1 GL-992SV1

3 GL-513S.1 GL-523S.1 GL-533S.1 GL-993SV1

4 GL-514S.1 GL-524S.1 GL-534S.1 GL-994SV1

5 GL-515S.1 GL-525S.1 GL-535S.1 GL-995SV1

6 GL-516S.1 GL-526S.1 GL-536S.1 GL-996SV1

7 GL-563SV1 GL527SV1 GL-537SV1 GL-997SV1

8 GL-518S.1 GL-528S.1 GL-538S.1 GL-998SV1


TP-351A 350-lb trip

87686090 550-lb trip


87506241 50° no offset

87506243 50° - 2 ¼-inch-left offset

87506242 50° - 2 ¼-inch-right offset

87500716 50° - 3 1⁄8-inch-left offset

87500715 50° - 3 1⁄8-inch-right offset

87506280 47° - no offset



METER ROLLERS

SHANKS

SEED METERS

TRIPS

NEW HOLLAND AIR CART METERING SYSTEMS ENSURE ACCURATE SEEDING, EVERY TIME. What crops do you seed now? How will that change next year, or three years from now? Whatever your plan, a range of meter roller designs provide you with accurate metering and efficient operation. Meters accommodate products ranging in size from the smallest forage seed to the largest bean—inoculated, treated or not—plus a wide range of fertilizer applications.

SELECT FORM THESE ROLLER OPTIONS:

Extra Fine: for micronutrients or very small seeds such as alfalfa, grass, canola and grain sorghum, at very low rates

Fine: for wheat, barley, oats, flax, millet and moderate rates of fertilizer

Extra Coarse: for very large, fragile seeds such as peas and large beans, and high rates of fertilizer

Coarse: for solid-seeding, larger crops such as corn and beans at high rates

37

AIR HOE DRILLS – SEED METERING AND TRIPS

CHOOSE YOUR SHANK STYLES AND TRIPS

PART NO. ID (INCHES) COLOR

4726 1 Clear/white helix

86993485 1 Black

73342889 1 Black

412786A1 1.25 Clear

84346017 1.25 Black

73342890 1.25 Black

350447A1 1.5 Black

73358256 1.5 Clear

6401 1.75 Clear

86992281 1.75 Black

1018883 2 Clear/white helix

241305A1 2 Black

3680 2.5 Clear/white helix

86992286 2.5 Black

73342891 2.5 Black

1978963CX 2.5 Black/urethane lined, extended wear

Your New Holland dealer offers PVC, low-pressure hose, sold by the foot, in sizes from 1 inch to 2.5 inches in diameter for air seeder applications.

AIR SEEDER HOSES

FLAT-FACED PACKER TIREPART NO. 290719A1

• Preferred for its ability to leave the field exceptionally smooth

• 6.5 inches x 15 inches • Pack the entire width of the

ribbon or row • Sustains minimal stubble

damage due to the thicker rubber on the flat face and the four-ply side

FOUR-PLY PACKER WHEELPART NO. 47357837

Application: P2070 precision hoe• 4.8 inches x 8 inches,

smooth wheel

HEADER STAND ELBOW


GP-103 Standard elbow

GP-102 High abrasion elbow

AIR HOE DRILLS

AIR HOE DRILLS38

LOW DISTURBANCE NH3 KNIVESPART NO. 47433844 (L.H.)PART NO. 47433845 (R.H.)

• Hard surfaced for extended acreage

L.D. SWEEP OPTIONSPART NO. 1032199 PART NO. 1032199N (ECONOMICAL IMPORT OPTION)6-inch sweep

PART NO. 1027915 PART NO. 1027915N (ECONOMICAL IMPORT OPTION)11-inch sweep

PART NO. 1033379 PART NO. 1033379N (ECONOMICAL IMPORT OPTION)13-inch sweep

PART NO. 87298812 L.D. 11-inch hard-faced sweep




47446028 25- and 30-foot kit

47446031 40-foot kit

Our clear rain and debris kit protects seed meters from the

elements—shielding the meter area from rain, overspray during

power-washing, and tire spray during transport. It also keeps dirt

clods, crop residue, gravel and small stones from getting into the

meter rolls. Two rain and debris kits are required per disk drill.

P2080/P2085 DISK DRILLS

P2080/P2085 DISK DRILLS 39

PART NO. DESCRIPTION CROP TYPE

84389793 Extra-fine roller Sorghum/milo, canola

84389792 Fine roller Flax, sorghum/milo

84389771 Coarse roller Barley, oats, rice, soybeans, wheat


84327548 Double castor and fixed rear wheel

GD-161A Single castor

84472211 High-flotation double castor and rear wing

RAIN AND DEBRIS KITS

SEED METERS

SERVICE SPINDLE ASSEMBLIES

EARTH METAL® OPENER DISKPART NO. 87488385

Application: P2080/P2085• 18 inches x 5 millimeters

GAUGE WHEEL ASSEMBLIESPART NO. 21618

Application: P2080/P2085• 4 inches x 16 millimeters

SEED LUBE/PAINT

SEED LUBE/PAINT


1132221N 12 oz. / 340 g

991049R2 1 qt. / 946 ml

1131548R2 1 gal. / 3.78 L

PART NO. APPLICATION

407408R1 14 oz. aerosol - No. 3

547596R1 1 qt. / .95 L - No. 1

1131916R1 1 gal. / 3.79 L - No. 1

TILCOATTilcoat is a specialized, oil-based coating designed to protect valuable field equipment during non-use periods.• Formulated to release from tillage tools upon their insertion

and use in the ground• Lead-free formula that dries to a non-toxic film and provides

short-term protection• Fast scouring, resists rust and easy to apply• Suggested applications include

tillage equipment, moldboards, plow shares, disks, sweeps and shovels

PENETRATING OILPART NO. B505502 12 oz. / 340 g

• Loosens rusted parts• Prevents corrosion on tools

and other parts• Dries out wet

engine parts• Stops binding

and squeaks

CHAIN AND CABLE LUBEPART NO. B505500 12 oz. / 340 g

• For use on construction and agricultural equipment

• Helps protect against rust and corrosion

• Fast penetrating action• Reduces chain wear

and increase life of chain and cables

• Resists high-temperature breakdown

• Heavy viscosity reduces throw-off

TALC/GRAPHITE SEED LUBRICANTIronGard™ seed lubricant is available for any type of planter, whether gravity or airflow. The proper use of seed lubricant prevents bridging in the hopper and reduces wear on moving parts in the seed meter.

NON-STICK GRAPHITE LUBRICANTSpray, brush or roll non-stick graphite lubricants onto any metal or wood surface to reduce sliding friction on chains and sprockets, hitches, overhead door tracks, winches, and hinges. This lubricant also works for the seed drum seal wearing ring and marker alternator of Cyclo planters, and as a surface conditioner on gravity boxes, hoppers, chutes, moldboards, planters and markers, forage boxes and wagon beds.

PART NO. DESCRIPTION APPLICATIONS

73341461 1 lb. 100% graphite All makes

73341462 8 lb. 100% graphite All makes

73341463 1 lb. 80% talc, 20% graphite All makes

73341464 8 lb. 80% talc, 20% graphite All makes

407486R1 1 lb. 100% graphite, fine particle size All makes

73340733 8 lb. 100% graphite, fine particle size All makes

73340734 1 lb. 50% talc, 50% graphite, fine particle size New Holland SP planters

73340370 8 lb. 50% talc, 50% graphite, fine particle size New Holland SP planters

73340918 Dispensing cap 8 lb. container

40

SEED LUBRICANT

Graphite seed lubricant provides lubrication for the seed delivery and seed meter components. For best coverage and performance with bulk fill, apply graphite seed lubricant either with an applicator on the seed tender or as the seed enters the tank. Refer to the planter operator’s manual for lubricant application rates for new planter hoppers and first fill. Also, set vacuum only as high as necessary to hold seeds to the seed disk; excessive vacuum accelerates seed disk and seed meter housing wear, makes singulation more difficult, and requires more oil flow and power to operate the fan.

SMART TIP

SEED LUBE/PAINT

LIFEBLOODS FOR ALL EQUIPMENT—

BOTH LEGACY AND NEW.

©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.

Simplify your shed with fluids for every application. New Holland lifebloods are the only fluids tested and recommended for your New Holland equipment by our expert engineers. New Holland fluids assure longer service intervals, higher performance and better-preserved machine equity. Don’t subject your equipment to the risk of unknown fluids—choose New Holland lifebloods.

PART NO. 87298942 73342896 73340374 73340677

Category 4 4 5 5

A= draw pin size 1 ½" or 2" 1 ½" or 2" 2 ¾" 2 ¾"

B= ball housing diameter 5 ½" 5 ½" 6 5⁄8" 6 5⁄8"

C= receiver width 4" 4" 4" 4"

D= draw pin to hole mtg 7" 7" 7 3⁄8" 6 5⁄8"

E= overall length 11" 11" 12" 12"

F= height (for drawbar strap) 2 ¾" 2 ¾" 3 3⁄8" 3 3⁄8"

G= bolt hole size 1" 1" 1" 1 5⁄8" pin

H= bolt hole distance 2 ¼" 2 ¼" 2 ¼" -

Number of bolt holes 2 3 2 1

J= receiver height 4 ½" 6 ¾" 4 ½" 4 ½"

K= hole center to back of receiver 1 ¼" 1 ¼" 1 ¼' 2"

L= ball housing thickness 2" 2" 2 3⁄8" 2 3⁄8"

Weight 31 lbs 37 lbs 35 lbs 35 lbs

HITCH PARTS

HITCH PARTS42

BULL PULL™

Give the connection between your tractor and implement the attention it deserves with Bull Pull: • Eliminates backlash for precise control• Heavy-duty for heavy loads• Easy to install• Increases the life of drawbars• Superior construction means

more pulls for your money

HARROW TEETHReplacement harrow teeth (shown in quantities of one) for a variety of implement manufacturers; heat-treated point.

PART NO. DESCRIPTION WIDTH LENGTH WEIGHT (LBS.)

SPC560216E Full diamond, 7⁄16" thread 5⁄8" x 7⁄8" 8" 0.6

SPC560217E Full diamond, ½" thread 5⁄8" x 7⁄8" 8" 0.6

SPC560218E Full diamond, 7⁄16" thread 5⁄8" x 7⁄8" 8 ½" 0.6

SPC560219E Full diamond, ½" thread 5⁄8" x 7⁄8" 8 ½" 0.6

SPC560220E Full diamond with head 5⁄8" x 7⁄8" 8" 0.62

SPC560221E Full diamond, no head 5⁄8" x 7⁄8" 8" 0.58

SPC560231E Square, no head 5⁄8" 8" 0.85

SPC560232E Square with head 5⁄8" 10" 1.05



SPC560240E Square, no head ¾" 8" 1.13

SPC560242E Square, no head ¾" 9" 1.25

SPC560245E Square with head ¾" 10" 1.45




H JF

D KG

E

LC

BA

FULL DIAMOND, NO HEAD

FULL DIAMOND WITH HEAD

FULL DIAMOND WITH THREAD

SQUARE, NO HEAD

SQUARE WITH HEAD

HITCH PARTS

HITCH PARTS 43

SIZE INDIVIDUAL COLOR CODE

½ inch 350704A1 Red5⁄8 inch 350703A1 Orange

¾ inch 350706A1 Yellow

1 1⁄8 inch 350747A1 Black

1 ¼ inch 350702A1 Green

1 7⁄16 inch 350701A1 Blue

1 ½ inch 350705A1 Silver

1 5⁄8 inch 350746A1 Black

4 inch 350845A1 Silver

HYDRAULIC CYLINDER DEPTH STOPSRustproof and lightweight stops are available for cylinder with shafts up to 2 ½ inches. Made from hardened,

high-density aluminum, these stops have an integral one-piece design that is easy to use and store. Our stops

are color coded to help with keeping things level from side to side.

HYDRAULIC HOSE ASSEMBLIESWHEN THE PRESSURE IS OFF, WHO DO YOU TRUST?When the loss of hydraulic pressure slows productivity, count on your New Holland dealer. He understands the pressure of your business, and stocks a wide range of OEM hose assemblies and bulk components.

CYLINDER STROKE CONTROL SEGMENTSDesigned to control the stroke on air or hydraulic cylinders; unique “Finger Tab” design on aluminum and steel models for easier installation and removal; clamshell package

PART NO. DESCRIPTION SEGMENTS PACAGE QTY.

87299447 Fits 1 3⁄8" and 1 ½" diameter shafts; aluminum; no finger tabs ¾", 1", 1 ¼", 1 ½" 1

87299448 Fits 1 1⁄8" and 1 ¼" diameter shafts; aluminum; no finger tabs ¾", 1", 1 ¼", 1 ½" 1

87299450 Fits 1 1⁄8", 1 ¼", 1 3⁄8" and 1 ½" diameter shafts; aluminum; finger tabs ¾", 1", 1 ¼", 1 ½" 1

87299451 Fits 1 ¾", 1 7⁄8" and 2" diameter shafts; aluminum; finger tabs 1", 1 ½", 2", 4" 1

87299447 87299448

87299450 87299451



PLOW BOLTS

PLOW BOLTS44

NO. 3 FLAT-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTSPART NO. LENGTH SETS PER BOX

3⁄8 — 16P2024481 1 ¼" 50

P2024483 1 ½" 50

7⁄16 — 14

P2024490 1 ¼" 50

P2024492 1 ½" 50

P2024494 1 ¾" 50

P2024496 2" 50

P2024498 2 ¼" 50

P2024500 2 ½" 50

P2024502 3" 25

½ — 13

P2024503 2" 50

P2024504 2 ¼" 50

P2024506 2 ½" 50

PART NO. LENGTH SETS PER BOX

3⁄8 — 16

P2024470 1 ½" 50

P2024472 1 5⁄8" 50

P2024474 1 ¾" 50

CONTOUR-HEAD PLOW BOLTS WITH SERRATED FLANGE NUTS

For convenience, the most popular plow bolts are available in packages that include bolts and serrated flange nuts for field cultivator sweeps, chisel plow shovels, Danish tine sweeps and many other tillage applications.

WHY NEW HOLLAND PLOW BOLTS?• Competitive pricing• Hardware is coated in environmentally friendly trivalent

chromium, eliminating the health and environmental concerns of previous hexavalent coatings

• Bolts are heat-treated to SAE J429 Grade-5 specifications



Storing your machine models and accessing parts is made easier with My Shed and My Shed Mobile App 2.1. Our apps offer.

Machine Management: enter serial number, hours and notesParts Manuals: access assembly diagrams and create part pick lists24/7 Dealer Connection: email part pick lists to a dealer

Toolboxes: Disk Blade Selector, Preservative Calculator, Oil/fluid Guide and Battery FinderMachine Info: product alerts and videos

MAKE THE SMART CHOICE AND REGISTER TODAY AT: PARTSTORE.AGRICULTURE.NEWHOLLAND.COM

Apple® Store for iPhone®

Google Play™ for Android™

©2014 CNH Industrial America LLC. New Holland is a registered trademark of CNH America LLC.

IN THE FIELD? NOT A PROBLEM.

ORDERING PARTS ONLINE COULDN’T BE EASIER.

EZ-GUIDE 250 FM-750 FM-1000 INTELLIVIEW IV

FEATURES

Size of color screen 4.3" 8.0" 12.1" 10.4"

Touchscreen - • • •

Video camera inputs - 2 4 3

GPS receiver 1 1 2 1

GLONASS compatibility - • • •

CORRECTION SERVICES

CenterPoint™ RTK <1" (2.5 cm) accuracy

- • • •

CenterPoint™ VRS™ <1" (2.5 cm) accuracy

- • • •

CenterPoint™ RTX™ 1.5" (3.8 cm) accuracy

- • • •

OmniSTAR® HP/XP 2-4" (5-10 cm) accuracy

- • • •

OmniSTAR® G2 3-4" (8-10 cm) accuracy

- • • •

RangePoint™ RTX™

6" (15 cm) pass-to-pass 20" (50 cm) repeatable

- • • •

SBAS (WAAS) 6-8" (15-20 cm) accuracy

- • • •

PRODUCT COMPATIBILITY

EZ-Steer® • • • -

EZ-Pilot™ - • • -

AutoPilot™ - • • -

Implement control - - • -

Row guidance - - • •

COMPARISON GUIDE: EZ-GUIDE® 250, FM-750™, FM-1000™ AND INTELLIVIEW IV DISPLAYS

CHOOSE FROM 7 DIFFERENT PATTERNS

Headland

Pivot

Identical curve

A-B pattern

FreeForm™

A+ pattern

Multi headlands

PRECISION FARMING

PRECISION FARMING46



ACCURACY: BIG PAYBACK ON YOUR TILLAGE INVESTMENT

Achieving lower operating costs is a multifaceted challenge—but precision farming can play a bigger part than you may think. Accuracy during tillage is often perceived as a lower priority than when seeding or planting, but it can still have a large impact on your overall costs. Less tilling overlap means less time in the field, which means less wear and tear on your machine and implement, and less fuel usage. The ultimate result? You guessed it: lower operating costs.

See below for some of the available accuracy options, and see the chart to the left for steering choices.

SMART TIP

PRECISION FARMING

47PRECISION FARMING

EZ-STEER® ASSISTED-STEERING SYSTEMThe EZ-Steer assisted-steering system provides simple, portable, hands-free farming for more than 1,200 vehicle models—old and new. The EZ-Steer system turns the steering wheel by combining a friction wheel and electric motor with guidance from an EZ-Guide® 250, FM-750™ or FM-1000™ display, giving you efficient, low-stress steering capabilities. It is ideal for broad-acre farming applications that don’t require extremely accurate positions.

EZ-STEER SYSTEM FEATURES:• Easy disengagement when you manually turn the steering

wheel for quick manual steering when desired

• The EZ-Steer system motor easily locks away from the steering wheel when not in use

• Easy installation and transferability from vehicle to vehicle

EZ-PILOT™

The EZ-Pilot assisted steering system turns the steering wheel for you with an electric motor drive using GPS guidance from the FM-750™ display and FM-1000™ display. While the EZ-Pilot system keeps you in line, you can focus on many different tasks, such as sprayer or planter performance, improving job quality and crop yields.

• T3™ enhances terrain compensation technology and immediately adjusts vehicle steering to compensate for rough terrain or slopes and hillsides

• Fast-reacting motor allows system to quickly get the vehicle in line and stay there

• Steering system can be installed onto existing steering wheels and used with telescoping steering wheels

• Allows for FreeForm™ steering

• Better steering of vehicles with more rigid power steering systems, such as floaters

• Motor integrated into the steering column provides clear access to all instrument panels without a decrease in cab legroom

AUTOPILOT™ AUTOMATED STEERING SYSTEMThe Autopilot™ automated steering system provides integrated, high-accuracy steering in any field type—hands-free. The Autopilot system automatically steers your vehicle—with speeds up to 30 mph (40 kph)—for maximum precision and increased productivity. It is ideal for the most demanding row crop farming applications.

THE AUTOPILOT SYSTEM:• Automatically steers your vehicle

• Integrates directly into your vehicle’s hydraulics for reduced clutter in cab

• Plugs in to many guidance-ready vehicles, minimizing the need for additional equipment

CenterPoint™ RTX™

1.5”OmniSTAR® XP/G2

3-5”RangePoint™ RTX™

6”SBAS (WAAS)

6-8”

From replacement engines to individual components, your New Holland dealer offers a wide range of remanufacturedparts for your New Holland equipment. All parts are re-engineered to meet or exceed

OEM specificationand cost 20 to 40 percent less than new parts. And we support each of our parts with an industry-leading warranty*. You’ll appreciate the value. Your equipment will appreciate the performance.

* When installed by a New Holland dealer.©2014 CNH Industrial America LLC. All rights reserved. New Holland is a registered trademark of CNH Industrial America LLC.

FOR A COMPLETE LIST OF REMANUFACTURED PARTS,SEE YOUR LOCAL NEW HOLLAND DEALER OR VISITPARTSTORE.AGRICULTURE.NEWHOLLAND.COM TODAY.

HIGH QUALITY. LOW PRICE.

SMART VALUE.

CNH Industrial New Corporate logo

AW_CNHI_ Reman_CMYK.ai

AC

03 12 2013

CMYK0. 90. 100. 23

CMYK0. 0. 0. 100

REMAN

REMAN

WARRANTIES FOR NEW HOLLAND REMANUFACTURED PARTS

49

WARRANTY PERIOD

DEALER INSTALLED NOT DEALER INSTALLED

Parts Labor Parts Labor

Remanufactured products not listed below 6 months Yes Yes Yes No

REMAN ENGINES/COMPONENTS

Replacement engines 24 months Yes Yes Yes No

Long block engines 24 months Yes Yes Yes No

Short block engines 12 months Yes Yes Yes No

Cylinder heads 6 months Yes Yes Yes No

Connecting rods 6 months Yes Yes Yes No

Fuel injectors 12 months Yes Yes Yes No

Turbochargers 12 months Yes Yes Yes No

Fuel injection pumps 12 months Yes Yes Yes No

REMAN DRIVELINE

Clutches 12 months Yes Yes Yes No

Axles 12 months Yes Yes Yes No

Torque converters 12 months Yes Yes Yes No

Power shuttles 12 months Yes Yes Yes No

Power shifts 12 months Yes Yes Yes No

Manual transmission 12 months Yes Yes Yes No

REMAN GEARBOXES

Wobble boxes 12 months Yes Yes Yes No

Rotor drives 12 months Yes Yes Yes No

REMAN ELECTRICAL

Alternators 12 months Yes Yes Yes No

Starters 12 months Yes Yes Yes No

Generators 12 months Yes Yes Yes No

All other electronics 12 months Yes Yes Yes No

REMAN HYDRAULICS

Pumps 12 months Yes Yes Yes No

Motors 12 months Yes Yes Yes No

Cylinders 12 months Yes Yes Yes No

MISCELLANEOUS

A/C compressors 12 months Yes Yes Yes No

CNH Industrial New Corporate logo

AW_CNHI_ Reman_CMYK.eps

AC

03 12 2013

CMYK0. 90. 100. 23

CMYK0. 0. 0. 100



SHOP PRODUCTS

SHOP PRODUCTS

NEW HOLLAND-BRANDED TOOLS

80-PIECE FIELD SERVICE KITPART NO. SN99980Kit includes:

• 32, 3⁄8-inch drive sockets • 31, ½-inch drive sockets • Two screwdrivers • 15 combination wrenches• Lifetime replacement warranty

45-PIECE BIT SETPART NO. SN18001A• Made from high-grade

chrome vanadium steel• Nickel chrome finish

for durability• Lifetime replacement warranty

AIR IMPACT WRENCHPART NO. SN17050• Steel-nose case with lightweight

aluminum housing• Rotary-action air motors—ball-bearing

mounted for balance, speed and power• Pressure feed grease lubrication• Five-position air speed regulator• Convenient side bar forward/reverse• Variable speed trigger—8,000 rpm• 425 feet per pound max torque forward/reverse• One-year warranty from date of purchase on parts and labor

8-PIECE WRENCH SETPART NO. SN70001• 15-degree offset on box end

provides knuckle clearance• Nickel chrome finish for durability• Dual-pawl ratcheting box end

provides smooth operation and maximum strength

• Lifetime replacement warranty

21-PIECE SOCKET SETPART NO. SN40001• Highly-polished chrome for

appearance and durability• Made from high-grade

chrome vanadium steel• Hardened for ultimate

strength and durability• Lifetime replacement warranty


PARTSTORE.AGRICULTURE.NEWHOLLAND.COM50

SHOP PRODUCTS

SHOP PRODUCTS

GR-9 MULTI-PURPOSE GREASE• Formulated for extreme pressure wheel-bearing and chassis applications • Formulated with a lithium complex thickener, rust and oxidation

inhibitors, and extreme-pressure additives to provide exceptional protection from wear and oxidation

GREASE

HI-TEMP EP GREASE• Formulated to withstand high-heat applications and still provide

outstanding wear-protection and load-carrying capabilities • Excellent choice for high-speed bearing applications

MOLY GREASE GR-75• Fortified with molybdenum disulfide (moly) to provide

exceptional wear protection for slow-speed, severe-wear, high-torque applications

• Perfect fit for areas like rockshafts, loader pins and bushings

SYNTHETIC GREASE GR-1000 SSL• An NLGI No. 2 high-performance grease—combines a synthetic

base fluid with a calcium-sulfonate complex thickener• Thickener system provides a high dropping point, while

heavy-duty additives provide optimum extreme-pressure properties and excellent resistance to water wash, oxidation and outstanding protection against rust and corrosion

• Excellent performance properties at both high and low temperatures

SOIL COMPACTION TESTERPART NO. 73340410

• 24-inch, stainless steel rod with adjustable shock collar to prevent damage to the gauge during transport or storage

• Easy-to-read, color-coded, stainless steel dial that is liquid-filled to reduce shock

• Durable molded housing with rubber-grip handles• Large and small tip included with convenient storage in tester housing• Hanger hole with nail included for easy storage on wall or

above workbench

SPECIFICATIONSPenetration depth Up to 24 inches in 3-inch increments

Two tips included – ½-inch tip for firm soil – ¾-inch tip for soft soil

Green testing range (0-200 psi) Good growing conditions

Yellow testing range (200-300 psi) Fair growing conditions

Red testing range (300 psi and above) Poor growing conditions

51

NOTES

NOTES52

NOTES

PART NUMBER INDEX

PART NUMBER INDEX 53

PART NO. PAGE NO.

3680 38

4497 8

4498 8

4499 29

4726 38

5785 29

5786 8

5787 27

6401 38

8503 29

9026 29

9686 29

21460 29

21461 29

21618 39

130384 27

1018883 38

1027915 38

1032199 38

1033379 38

47357837 38

47433844 38

47433845 38

47446028 39

47446031 39

47532734 34

47532784 34

47556260 34

73340370 40

73340374 42

73340375 26, 30

73340410 51

73340677 42

73340733 40

73340734 40

73340918 40

73341304 26

73341461 40

73341462 40

73341463 40

73341464 40

73341695 26, 30

73341805 15

73342628 9

PART NO. PAGE NO.

73342629 9

73342630 9

73342631 9

73342632 9

73342633 9

73342634 9

73342635 9

73342636 9

73342637 9

73342638 9

73342639 9

73342889 38

73342890 38

73342891 38

73342896 42

73358256 38

84180366 15

84193957 36

84193961 36

84327548 39

84346017 38

84380555 15

84380560 15

84389195 35

84389196 35

84389771 39

84389792 39

84389793 39

84398745 35

84398746 35

84416318 35

84416319 35

84472211 39

86990834 27

86992281 38

86992286 38

86993485 38

87298811 38

87298812 38

87298813 38

87298834 30

87298942 42

87299128 30

87299447 43

PART NO. PAGE NO.

87299448 43

87299450 43

87299451 43

87299953 30

87400930 26, 30

87400932 30

87400933 30

87400934 30

87400935 30

87400936 26, 30

87400937 26, 30

87400939 31

87400941 30

87401019 15

87413627 30

87413628 30

87415788 15

87443007 15

87443008 15

87443009 15

87443010 15

87460413 6

87460414 6

87488385 39

87500715 37

87500716 37

87506241 37

87506242 37

87506243 37

87506261 36

87506280 37

87506281 37

87506282 37

87506283 36

87506287 36

87506290 36

87506291 36

87506292 36

87506294 36

87506407 36

87506409 36

87515418 29

87546271 27

87584040 30

PART NO. PAGE NO.

87589793 8

87589822 29

87589836 27

87686090 37

1027915N 38

1032199N 38

1033379N 38

1131548R2 40

1131916R1 40

1132221N 40

122567C1 30

1277891C91 35

129195A2 30

130800A2 30

133480A1 35

133765A1 28

133766A1 28

133767A1 28

133768A1 28

133769A1 28

133770A1 28

1344516C1 30

1344911C3 35

140445A2 31

140450A2 30

141205C2 30

141464C92 35

1547095C2 6

1547096C2 6

1547097C2 6

1547098C2 6

1547099C2 6

1547100C2 6

1547101C2 6

1547102C2 6

1547103C2 6

1547104C2 6

1547105C1 28

1547106C1 28

1547107C1 28

1547108C1 28

1547109C1 28

1547110C1 28

1547180C1 9

PART NUMBER INDEX

PART NUMBER INDEX54

PART NO. PAGE NO.

1547181C1 9

1547182C1 9

1547183C1 9

193054A1 27

197511A1 29

1978963CX 38

1995505C1 27

1995506C1 27

241305A1 38

248517A1 28

248518A1 28

248519A1 28

248520A1 28

248523A1 28

248524A1 28

248525A1 28

248526A1 28

251419DS 32

251421DS 32

251422DS 32

251423DS 32

251424DS 32

251426DS 32

251427DS 32

251427HDS 32

251428DS 32

251429DS 32

251430DS 32

251431DS 32

251431HDS 32

251434DS 32

251435DS 33

251437DS 33

251439DS 33

251440DS 32

251441DS 32

251442DS 32

251443DS 32

251448DS 33

251449DS 33

251565DS 32

251566DS 32

251566HDS 32

251571DS 33

PART NO. PAGE NO.

251574DS 32

251578DS 33

251579DS 33

25332BA 27

25702BA 27

28341R1 30

28597R1 31

290719A1 38

294957A1 29

31399R1 30

321165A2 30

350447A1 38

372560A1 6

372561A1 6

372562A1 6

380434A1 7

380435A1 7

380436A1 7

400309A1 6, 7

407408R1 40

407486R1 40

410526A1 35

412786A1 38

416010A1 35

416015A1 35

416442A1 34, 35

416442A1 35

416443A1 34, 35

428354A1 34, 35

431542A1 30

435480A1 35

443623A1 15

443626A1 30

443627A1 30

443629A1 15

443630A1 15

443635A1 30

443637A1 30

443638A1 30

479005R2 8

479006R2 8

479007R2 8

479008R2 8

479009R2 8

PART NO. PAGE NO.

479010R2 8

479011R2 8

479012R2 8

547188R2 27

547596R1 40

594227R1 27

594545R1 27

594546R1 27

596623R1 27

601986R1 27

602594R1 27

602595R3 27

602595R3N 27

603020R92 35

6078BB 8

6079BC 8

6080BC 8

6081BC 8

6083BA 8

790-1002 31

811191C1 9

811799C3 27

811889C1 27

812362C1 31

812384C3 27

812385C3 27

991049R2 40

B500276 35

B505500 40

B505502 40

B93368 27

B93369 27

B93370 27

B95242 27

B95243 27

CDS209TTR 21

CDS211TTR 21

DC208TT1018, 19, 21, 22

DC208TT2 18

DC208TT516, 17, 18, 20, 21, 23,

24, 25

DC208TT8 17, 20

DC208TTR17 17, 21, 25

PART NO. PAGE NO.

DC210TT 20

DC210TT216, 19, 24, 25

DC210TTR4 16, 19

DC211TT2 18, 20

DC211TT316, 18, 19, 21, 22, 23

DC211TTR216, 17, 20, 21

DC211TTR21 22, 24

DC211TTR316, 17,

18, 21, 25

DC211TTR3E 22

DC211TTR4 16, 18, 19

DC214TTR2 16

DC214TTR3 16, 18, 19

DS208TT1217, 18, 19, 20, 21, 22, 23, 24, 25

DS208TT12A 17, 24

DS208TT13 17, 23, 24

DS208TT2A17, 19, 20, 22

DS208TT516, 17, 18, 19, 21, 22, 23, 24, 25

DS208TT616, 17,

18, 20, 22, 23, 25

DS208TT718, 21,

23, 24, 25

DS208TT8 16, 18, 24

DS208TTR5 23

DS208TTR6 23

DS208TTR816, 19, 21, 23, 24, 25

DS209TT217, 18,

19, 22, 23, 24, 25

DS209TT4 19, 21, 25

DS209TT6 18

DS209TT7 22

DS209TT8A 21

DS209TTR10 20

DS209TTR217, 19, 21, 23

DS209TTR419, 20,

21, 22, 24

DS209TTR5 18, 22, 24

DS209TTR6P 22

DS209TTR8 22, 23

PART NUMBER INDEX

PART NUMBER INDEX 55

PART NO. PAGE NO.

DS210TT217, 19,

20, 22, 24

DS210TT4 16

DS210TT5 21

DS210TTR2 16, 18, 19

DS210TTR4 21

DS210TTR5R 18

DS211TT3 17, 19, 22

DS211TT4 18

DS211TT616, 17,

18, 22, 24

DS211TTR1317, 19,

20, 23, 24

DS211TTR218, 20, 23, 25

DS211TTR23 22

DS211TTR316, 17,

18, 20, 22, 23, 24, 25

DS211TTR9 20

DS214TTR3 19

DS216TTR3 21

FD209RB19, 20, 21, 22, 23, 25

FD209RK 20, 22, 24

FD209RM 21, 24, 25

FD211RE 17, 20, 22

FD211RJA 20, 25

FD211RM17, 21, 23, 25

GD-161A 39

GP-102 38

GP-103 38

HPC100GP 21

P2024470 44

P2024472 44

P2024474 44

P2024481 44

P2024483 44

P2024490 44

P2024492 44

P2024494 44

P2024496 44

P2024498 44

P2024500 44

P2024502 44

P2024503 44

P2024504 44

PART NO. PAGE NO.

P2024506 44

SBP219537B 30

SBP220303B 30

SN17050 50

SN18001A 50

SN40001 50

SN70001 50

SN99980 50

SPC560216E 42

SPC560217E 42

SPC560218E 42

SPC560219E 42

SPC560220E 42

SPC560221 42

SPC560231E 42

SPC560232E 42

SPC560234E 42

SPC560236E 42

SPC560240E 42

SPC560242E 42

SPC560245E 42

SPC560247E 42

SPC560249E 42

SPC560251E 42

ST14253 33

ST14255 32

ST14256 33

ST14257 33

ST14258 32

ST462313DS 32

ST462314HXDS 32

ST463236R1 32

ST463237R1 32

ST463238R1 32

ST463253R1 32

ST463254R1 32

ST464582R1 32

ST464583R1 32

ST464591R1 32

ST475937HXDS 33

ST522325R12 33

ST59057C1 33

ST59058C1 33

ST660020HXDS 33

PART NO. PAGE NO.

ST660204DS 32

STHS151DS 32

STMF164RSDS 32

STP6522182 33

STP6526829 32

STP6526832 32

STP6526852 33

STRD16RDS 32

T54196 30

TP-351A 37

ZSN18358 34, 35

SAFETY NEVER HURTS !™ Always read the Operator’s Manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs, and use any safety features provided.

PM-17048A Issued 05/2014 Replaces: PM-17048

©2014 CNH Industrial America LLC. All rights reserved.

New Holland is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Reman is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. www.newholland.com

Any trademarks referred to herein, in association with goods and/or services of companies, other than owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, are the property of those respective companies.

tillage and planting - agricultural machinery parts,...

Documents