tillage and planting products catalog - ingersoll tillage · 4 product selection chart discs plain...

Tillage and PlantingProducts Catalog

There was a time when farming was done at a slower

pace. It was a time when horses and oxen provided

the pulling power and farmers walked the field behind

them. Fields were tilled with a single coulter blade

fastened in front of a plow that would cut through

crop residue and break up clumps of sod prior to

turning the soil. And we were there.

In 1884, Steven Ingersoll took over a small coulter

disc manufacturing company in Sandoval, Illinois.

The discs produced there were the state of the art,

back then, but everything was about to change.

In 1905, the company moved to Galesburg, Illinois,

was renamed the Galesburg Coulter-Disc Company, and

grew very rapidly as farming was changing dramatically.

By 1920, tractors were now pulling coulters

through the soil faster and faster, slicing through

fields and slamming into rocks at a pace nobody

could have imagined just a few years earlier. The old

discs, with their old steel were wearing out too fast

and breaking too often.

Enter the next generation.Roy Ingersoll, Steven’s son, began experimenting

with new heat treating processes and improved

manufacturing techniques. These resulted in discs

that could hold their shape and sharpness under the

most demanding conditions. This new technology,

made it possible to create blades that were slightly

cup shaped (concave) to more aggressively manipu-

late the soil.

Since then, farms have continued to increase in

size, tractors have continued to increase in power

and Ingersoll has continued to improve our blades to

meet each of

these new chal-

lenges. Today,

the Ingersoll

Tillage Group is

built upon the

legacy of Steven

and Roy Ingersoll.

A History of Innovation

Our North American manu-

facturing center is the most

modern in the industry, on a

site that has been producing

tillage and planting equip-

ment and components for

over 100 years. Proud of our

heritage, we are dedicated

to serving the farmer

through innovation in new products and support.

New steels, new processes, newadvantages for the farmer.At Ingersoll, we use an advanced proprietary boron

steel alloy that’s the best in the industry. This very

special steel alloy means that our blades are among

the hardest you can buy.

Hard steel is a good thing. But a disc also has to be

flexible to resist chipping in rocky soil. Disc metal has

to possess a quality that material scientists refer to

as “fracture toughness” - the ability to resist fractures.

No farmer wants to pick up broken disc shrapnel

with a harvester at the end of the season.

Hardness. Flexibility. Sharpness. Ductility. Fracture

toughness. We know of no other disc you can buy

that matches us in all of these critical properties.

Unparalleled manufacturing quality.For the very best coulters and discs, advances in

material science have to be matched with advances

in material handling and manufacturing processes.

This is where we excel. Our metal forming and heat

treating operations as well as robotic cutting and

grinding machines produce strict dimensional control,

edge sharpness and wobble tolerances that exceed

every OEM specifications on the planet.

4

Product Selection Chart

DiscsPlain Concave Notched Concave SoilRazor™ SoilRebel™

Shallow Full Shallow Full CT VT

See Page 7 See Page 7 See Page 8 See Page 8 See Page 9 See Page 23

Diameters Concavity (C)

Disc Size 18˝ 25 mm 38 mm 25 mm 38 mm 38 mm20˝ 31 mm 53 mm 31 mm 53 mm 51 mm 47 mm22˝ 41 mm 65 mm 41 mm 65 mm 55 mm 49 mm24˝ 52 mm 78 mm 52 mm 78 mm 70 mm26˝ 63 mm 87 mm 63 mm 87 mm 90 mm28˝ 74 mm 95 mm 74 mm 95 mm 105 mm30˝ 104 mm 104 mm 122 mm32˝ 127 mm 127 mm 122 mm36˝ 130 mm

Factors Qualities

Aggressive-ness

LowMedium X XHigh X X X X

Tillage Practice

Vertical X X XConventional X X X X X

ResidueManagement

GoodBetter X XBest X X X X

Soil Penetration

Good X XBetter X X XBest X

SpeedSlow

Medium X X XHigh X X X

How to use this catalog.

The selection chart shown below is a goodplace to start. It helps you to choose the disc orcoulter that’s best-suited for your needs.Then, go to the catalog page indicated to se-

lect the specific product based on diameter,thickness, etc. With the product number indi-cated, you can order the products you need.If you need a product that’s not listed in this

C C C C C

Chart concept courtesy of our good friends at Yetter Co.

C

5

Coulters

Product SelectionChart

VT 25 13 8 36 Radial Wave Wave Wave Wave Bubble Rippled Plain

8-10mm 14-16mm 14-16mm 18-20mm 25-55mm 16-18mm 8-10mm 4-7mmSee Page 15 See Page 24 See Page 16 See Page 16 See Page 16 See Page 15 See Page 16 See Page 14 Diameters

X X 14˝

Disc Size

X X X 15”X X X X X X X X 16”X X X X X X 17”X X X X X X X 18”

X X X X X 20”X X X X 22”

X 25”

Qualities FactorsX X X X Low

Aggressive-nessX X Medium

X X X High

X X X X X X X No-TillTillagePracticeX X X X X X X X Reduced Till

X X X X X Conventional

Good

FertilizerX X Better

X X X Best

X GoodResidue

ManagementX X X Better

X X X X Best

X X X X X X X X Dry

SoilConditions

X Damp/Sticky

X X X X X X X X Sandy

X X X X X X X Heavy

X X Deep PlacementX X X Coarse

Soil TilthX X X X X X Medium

X X X Fine

X X Extra Fine

X X X X X Slow

SpeedX X X X X X X Medium

X X X X X X X X High

catalog, contact your authorized IngersollSales Representative. To help you determinethe size and specs, we’ve provided handyworksheets in the back of this catalog. For all

additional information, please visit our website:

www.IngersollTillage.com

Sharp and strong, all day long.

Concave discs are used to pulverize andsmooth the soil. Large diameter discs, some-times called plowing discs, cut deep into thesoil and turn it as they go. They’re usedwhere extensive soil disturbance is desiredand the farmer’s goal is to bury the residuefrom the last crop.

The Ingersoll family of discs includesplain edge discs, notched edge discs andthe new SoilRazor disc, all in a varietyof sizes and styles. You’ll also find spe-cial metals, like our new RollableBoron discs and special surface treat-ments like the DuraFace.

Best of all, because they’re made by In-gersoll, you have the assurance that theyare manufactured to the highest standardsof quality and sharpness and uniformityfeaturing the best steel formulations in thebusiness.

Concave Discs

6

Plain Concave DiscsDiameter (D) Thickness (T) Concavity (C) Part

NumberWeight

Inches mm Gauge mm Inches mm Radius (CR) Lbs Kgs9 229 9 3.5 0.36 9.4 560 mm 10004 2.7 1.212 305 11 3 0.85 21.7 560 mm 10001 3.0 1.414 356 11 3 1.10 28 560 mm 10480 5.0 2.314 356 9 3.5 1.10 28 560 mm 10005 5.5 2.514 356 8 4 1.10 28 560 mm 10187 6.3 2.916 406 11 3 1.5 38 560 mm 10007 6.9 3.116 406 9 3.5 1.5 38 560 mm 10013 7.9 3.616 406 8 4 1.5 38 560 mm 10015 8.9 4.018 457 9 3.5 1.7 42 620 mm 10025 9.8 4.518 457 8 4 1.7 42 620 mm 10034 11.3 5.118 457 7 4.5 1.7 42 620 mm 10035 12.7 5.818 457 6 5 1.7 42 620 mm 10039 14.2 6.5

18 457 1/4˝Heavy

6.5 1.7 42 620 mm 10045 18.0 8.2

The concave disc doesan excellent job of tillingand inverting the soil.The action of the discdepends on the sizeand depth of the disc,the concavity and thespeed.

20 508 9 3.5 2.1 53 620 mm 10046 12.9 5.920 508 8 4 2.1 53 620 mm 10049 13.9 6.320 508 7 4.5 2.1 53 620 mm 10055 15.9 7.220 508 6 5 2.1 53 620 mm 10060 17.5 7.920 508 6 5 1.4 34 920 mm 10062 17.5 7.920 508 1/4˝ 6 2.1 53 620 mm 10070 20.7 9.4

20 508 1/4˝Heavy

6.5 1.4 34 920 mm 10076 22.6 10.3

22 560 7 4.5 2.5 65 620 mm 10082 19.6 8.922 560 6 5 2.5 65 620 mm 10091 21.9 9.922 560 1/4˝ 6 2.5 65 620 mm 10100 25.7 11.7

22 560 1/4˝Heavy

6.5 2.5 65 620 mm 10104 27.5 12.5

24 610 7 4.5 3.1 78 620 mm 10112 23.5 10.724 610 6 5 3.1 78 620 mm 10117 26.1 11.824 610 1/4˝ 6 3.1 78 620 mm 10123 30.8 14.0

24 610 1/4˝Heavy

6.5 3.1 78 620 mm 10128 33.6 15.3

24 610 5/16˝ 8 3.1 78 620 mm 10140 40.6 18.426.5 673 1/4˝ 6 3.4 87 675 mm 10144 37.5 17.0

26.5 673 1/4˝Heavy

6.5 3.4 87 675 mm 10148 40.2 18.3

26.5 673 5/16˝ 8 3.4 87 675 mm 10157 49.4 22.528.5 724 5/16˝ 8 3.7 95 710 mm 10170 58.2 26.430 762 5/16˝ 8 3.5 90 840 mm 10176 60.7 27.632.5 826 7/16˝ 10 5.0 127 710 mm 10185 60.7 27.6

Concave Disc Measurements

7

Diameter(D)

(T) Thickness

ConcavityRadius (CR)

(C) Concavity

Edge Detail(Type 1)*

*Standard edge for concave discs. See page 32 for other edge styles.

Notched Concave Discs

Diameter Thickness Concavity PartNumber

Weight(D) (T) (C)

Inches mm Gauge mm Inches mm Radius (CR) Lbs Kgs16 406 11 3 1.34 34 620 mm 10009 6.0 2.7

18 457 11 3 1.9 49 560 mm 10021 8.7 4.018 457 8 4 1.7 42 620 mm 10033 11.3 5.118 457 7 4.5 1.7 42 620 mm 10037 11.4 5.218 457 1/4˝ 6 1.7 42 620 mm 10043 16.2 7.3

20 508 9 3.5 2.1 53 620 mm 10047 12.3 5.620 508 8 4 2.1 53 620 mm 10051 13.0 5.920 508 7 4.5 2.1 53 620 mm 10058 14.3 6.520 508 6 5 2.1 53 620 mm 10068 16.2 7.420 508 1/4˝ 6 2.1 53 620 mm 10078 18.9 8.6

20 508 1/4˝Heavy

6.5 2.1 53 620 mm 10079 22.6 10.3

22 560 7 4.5 2.5 65 620 mm 10087 18.0 8.222 560 6 5 2.5 65 620 mm 10097 20.2 9.222 560 1/4˝ 6 2.5 65 620 mm 10101 23.8 10.8

22 560 1/4˝Heavy

6.5 2.5 65 620 mm 10109 27.5 12.5

24 610 7 4.5 3.1 78 620 mm 10113 22.2 10.124 610 6 5 3.1 78 620 mm 10115 24.4 11.124 610 1/4˝ 6 3.1 78 620 mm 10124 28.6 13.0

Notched concave discsprovide a very aggressivecutting edge that is well-suited for soil penetration(especially when the con-cavity of the disc is shal-low). These discs are alsoa good choice for residuemanagement.

24 610 1/4˝Heavy

6.5 3.1 78 620 mm 10125 31.7 14.4

24 610 5/16˝ 8 3.1 78 620 mm 10126 32.8 14.9

26.5 673 1/4˝ 6 3.4 87 675 mm 10146 34.4 15.6

26.5 673 1/4˝Heavy

6.5 3.4 87 675 mm 10151 37.5 17.0

26.5 673 5/16˝ 8 3.4 87 675 mm 10155 46.5 21.1

28.5 724 1/4˝ 6 3.7 95 710 mm 10163 41.7 19.0

28.5 724 1/4˝Heavy

6.5 3.7 95 710 mm 10164 45.2 20.5

28.5 724 5/16˝ 8 3.7 95 710 mm 10472 45.2 20.5

30 762 5/16˝ 8 3.5 90 840 mm 10178 60.7 27.6

32.5 826 5/16˝ 8 5.0 127 710 mm 10183 60.7 27.6

8

Concave Disc Measurements

Diameter(D)

(T) Thickness

ConcavityRadius (CR)

(C) Concavity


*Standard edge for concave discs. See page 32 for other edge styles.

SoilRazor™ CT Discs

New!Diameter Thickness Concavity Part

Number(C) (T) (C)

Inches mm Gauge mm Inches mm22 560 8 4 2.17 55 10530

22 560 6 5 2.17 55 10601

24 610 6 5 2.75 70 10604

24 610 1/4˝ 6 2.75 70 10531

26 660 6 5 3.54 90 10532

26 660 1/4˝ 6 3.54 90 10533

26 660 5/16˝ 8 3.54 90 10534

28 711 1/4˝ 6 4.13 105 10535

28 711 5/16˝ 8 4.13 105 10536

30 762 5/16˝ 8 4.80 122 10551

30 762 3/8˝ 9.5 4.80 122 10552

30 762 1/2˝ 12.5 4.80 122 10553

32 813 5/16˝ 8 4.80 122 10537

32 813 3/8˝ 9.5 4.80 122 10538

32 813 1/2˝ 12.5 4.80 122 10539

36 915 1/2˝ 12.5 5.12 130 10540

The saw-tooth cutting edge of the SoilRazor Disc is extremely well-suited for deep soilpenetration and cutting through the toughest of residue. With its unique profile,it main-tains it’s cutting ability long after traditional coulters have become dull.

Notch DetailsDiameter Notch Width Notch Depth Number of

Notches(D) (NW) (ND)Inches mm Inches mm Inches mm18 457 3.1 78 1.1 29 920 508 3.1 78 1.1 29 1022 559 3.1 78 1.1 29 1024 610 3.1 78 1.1 29 1026.5 673 3.5 90 1.6 40 1028.5 724 3.5 90 1.6 40 1030 762 3.5 90 1.6 40 1032 813 3.5 90 1.6 40 10NW

ND

9

ND = Notch DepthNW = Notch Width

Rollable Boron DiscsDiameter Thickness Concavity

Part Number

Weight(D) (T) (C)

Inches mm Gauge mm Inches mm Radius (CR) Lbs Kgs

22 560 1/4˝Heavy

6.5 2.5 65 620 mm 10514 27.5 12.5

24 610 1/4˝Heavy

6.5 3.1 78 620 mm 10515 33.4 15.2

Rollable boron discs enjoy the advanced properties of Ingersoll’s exclusive boron alloy, yet theedges of these discs can be renewed by rolling, rather than grinding. For farmers who userolling equipment, these discs offer the best of both worlds.

Plain Flat Center Discs

Diameter (D) Thickness (T) Flat Center Dia(FCD) Concavity(C) Part

NumberWeight

Inches mm Gauge mm Inches mm Inches mm Lbs Kgs8 203 12 2.5 3.50 88.9 0.4 11 10196 1.5 0.7

12 1305 12 2.5 3.80 96.5 0.8 21 10206 3.5 1.6

13 330 11 3 4.75 120.7 1.2 31 10221 3.4 1.5

14 356 12 2.5 4.75 120.7 1.4 36 10229 4.3 2.014 356 11 3 4.75 120.7 1.4 36 10236 5.2 2.414 356 8 4 4.75 120.7 1.4 36 10245 6.3 2.9

16 406 9 3.5 4.50 114.3 1.3 35 10288 8.5 3.916 406 8 4 4.50 114.3 1.3 35 10291 8.7 4.0

18 457 11 3 6.50 165.1 1.1 28 10329 7.8 3.5

20 508 6 5 6.50 165.1 1.4 36 10363 17.4 7.920 508 1/4˝ 6 6.50 165.1 1.4 36 10364 19.1 8.7

Plain flat center discshave a slight concavityto provide careful con-trol over soil tillage.

20 508 1/4˝Heavy

6.5 6.50 165.1 1.4 36 10372 22.5 10.2

22 559 1/4˝Heavy

6.5 6.50 165.1 1.8 45 10390 27.0 12.3

24 610 1/4˝Heavy

6.5 6.50 165.1 2.5 64 10401 32.2 14.6

10

Diameter(D)

(T) ThicknessFlat Center Disc measurements

(FCD) Flat CenterDiameter


(C) Concavity

Notched Flat Center DiscsDiameter Thickness Flat Center Dia Concavity Part

NumberWeight

(D) (T) (FCD) (C)Inches mm Gauge mm Inches mm Inches mm Lbs Kgs13 330 9 3.5 4.75 120.7 1.2 31 10225 4.7 2.1

14 356 12 2.5 4.75 120.7 1.4 36 10231 4.3 2.0

16 406 9 3.5 4.50 114.3 1.3 35 10290 8.5 3.9

16 406 8 4.0 4.50 114.3 1.3 35 10293 8.5 3.9

18 457 11 3.0 6.50 165.1 1.1 28 10327 7.8 3.5

20 508 1/4˝Heavy

6.5 6.50 165.1 1.4 36 10369 19.5 8.9

24 610 1/4˝Heavy

6.5 6.50 165.1 2.5 64 10398 31.1 14.1

As with notched concave discs, flat center discs provide a very aggressive cutting edge that is well-suited for soil penetration (especially when the concavity of the disc is shallow). These discs arealso a good choice for residue management.

*Standard edge for flat center discs. See page 32 for other edge styles.

11

Notch DetailsDiameter Notch Width Notch Depth Number of

Notches(D) (NW) (ND)Inches mm Inches mm Inches mm18 457 3.1 78 1.1 29 9

20 508 3.1 78 1.1 29 10

22 559 3.1 78 1.1 29 10

24 610 3.1 78 1.1 29 10

26.5 673 3.5 90 1.6 40 10

28.5 724 3.5 90 1.6 40 10

30 762 3.5 90 1.6 40 10

32 813 3.5 90 1.6 40 10

NW

ND

ND = Notch DepthNW = Notch Width

Notched DuraFace Discs

New!Diameter Thickness Concavity

PartNumber

Weight(D) (T) (C)


24 610 1/4˝ 6 3.1 78 620 mm 10340 29.5 13.4

26.5 673 1/4˝ 6 3.4 87 675 mm 10355 33.9 15.4

28.5 7241/4˝Heavy

6.5 3.7 95 710 mm 10357 43.619.8

28.5 724 5/16˝ 8 3.7 95 710 mm 10370 58.2 26.5

30 762 5/16˝ 8 4.1 104 710 mm 10377 60.4 27.5

32.5 826 5/16˝ 8 5.0 127 710 mm 10419 72.9 33.1

32.5 826 1/2˝ 10 5.0 127 710 mm 10386 90.3 41.0

Concave DuraFace Discs

New!Diameter Thickness Concavity Part

NumberWeight(D) (T) (C)

Inches mm Gauge mm Inches mm Radius (CR) Lbs Kgs24 610 1/4˝ 6 3.1 78 620 mm 10234 33.6 15.3

26.5 673 1/4˝ 6 3.4 87 675 mm 10237 37.5 17.0

28.5 724 1/4˝Heavy

6.5 3.7 95 710 mm 10303 43.619.8

28.5 724 5/16˝ 8 3.7 95 710 mm 10325 58.2 26.5

30 762 5/16˝ 8 4.1 104 710 mm 10449 61.9 28.1

The patented DuraFace process is a special surface coating that yields a disc that nearly as hardas tungsten carbide but without the brittleness, nearly as corrosion-resistant as stainless steelbut without the high price.

12

Center Hole Configurations available for Concave Discs and Coulters

Plain Concave, Rollable Boron, DuraFace and SoilRazor CT

ITG Hole PatternsOrder Number

Spec Fits Axle Type Fits Axle Sizes

10 DS1 Dual Square 7/8˝ Square 1˝ Square 1˝ Round

11 DS2 Dual Square 1˝ Square 11/8˝ Square 11/8˝ Round

12 DS3 Dual Square 11/8˝ Square 11/4˝ Square 11/4˝ Round



15 R1 Round 1˝ Round

16 R2 Round 11/8˝ Round





21 R6 Round 2˝ Round

22 R6.5 Round 21/4˝ Round


24 SQ1 Square 1˝ Square

25 SQ1.5 Square 11/4˝ Square

26 SQ2 Square 23/8˝ Square

27 SR1 Square Round 7/8˝ Square 1˝ Round

28 SR2 Square Round 1˝ Square 11/8˝ Round

29 SR3 Square Round 11/8˝ Square 11/4˝ Round


31 SR4.5 Square Round 11/2˝ Square 15/8˝ Round


33 SR6 Square Round 13/4˝ Square 2˝ Round


35 CL1 Cloverleaf 7/8˝ Square 7/8˝ Round

36 CL2 Cloverleaf 1˝ Square 1˝ Round






13

Something for every farming application.

Coulters come in a wide variety of sizesand shapes. The right coulter for yourapplication depends on your soil com-position and humidity as well as the cropyou’re planting, the residue from your lastcrop and your choice of farming tech-niques. Plain coulters provide excellentpenetration and cutting ability with verylittle soil disturbance while wavy coultersdisturb the soil to a much greater de-gree. Of course, the depth of the wavehas a lot to do with how much the soil isdisturbed. Fluted coulters are some-where in between.

Coulters

Diameter (D) Thickness (T) Part Number

WeightInches mm Gauge mm Lbs Kgs8 203 12 2.5 10197 1.5 0.7

12 305 11 3.0 10208 4.0 1.8

14 356 9 3.5 10240 5.5 2.5

14 356 8 4.0 10243 6.4 2.9

15 381 11 3.0 10247 7.6 3.5

15 381 8 4.0 10251 7.7 3.5

15 381 7 4.5 10259 8.0 3.6

16.1 410 8 4.0 10275 9.7 4.4

16.1 410 7 4.5 10282 9.7 4.4

16.1 410 6 5.0 10284 10.3 4.7

16.1 410 1/4˝ Heavy 6.5 10285 12.8 5.8

17.6 430 8 4.0 10309 10.1 4.6

17.6 430 7 4.5 10314 11.5 5.2

18 460 7 4.5 10332 12.6 5.7

18 460 6 5.0 10322 13.1 6.0

18 460 1/4˝ Heavy 6.5 10476 13.1 6.0

20.4 518 8 4.0 10352 15.4 7.0

20.4 518 7 4.5 10358 15.4 7.0

20.4 518 6 5.0 10361 17.4 7.9

20.4 518 1/4˝ Heavy 6.5 10367 22.0 10.0

22.6 574 7 4.5 10380 19.5 8.9

22.6 574 6 5.0 10383 22.0 10.0

22.6 574 1/4˝ Heavy 6.5 10389 22.0 10.0

24.8 630 7 4.5 10394 23.5 10.7

24.8 630 1/4˝ Heavy 6.5 10397 34.6 15.7

27.3 694 1/4˝ Heavy 6.5 10551 37.5 17.0

14

Plain Coulters

Plain coulters arethe perfect solu-tion for when youwant to cutthrough residueand penetratethe soil with mini-mal soil distur-bance.

Plain Coulter Measurements

Diameter(D)

(T) Thickness


*Standard edge for coulters. See page 32 for other edge styles.

RadialRazor™

New! Diameter (D) Thickness (T) Flat Center Diameter (FCD) Number

of Flutes(NF)

FluteHeight

Part Number

Inches mm Gauge mm Inches mm

14 355 8 4 8.27 210 20 .16˝ 10546

15 381 8 4 8.27 210 20 .22˝ 10547

16 406 8 4 8.27 210 20 .22˝ 10548

17 432 8 4 8.27 210 20 .22˝ 10549

18 457 8 4 8.27 210 20 .22˝ 10550

The unique asymmetrical wave design of the RadialRazor allows the blade to cut progressively athigher speeds with minimum effort, reduced soil stirring and reduced humidity loss.

36 Bubble Coulter

Diameter (D) Thickness (T) Flat Center Diameter (FCD) Flute

HeightPart

NumberWeight

Inches mm Gauge mm Inches mm Lbs Kgs

15.8 401 8 4.0 8 203.2 .75˝ 10265 7.9 3.6

Bubble coulters are well-suited for fields with light residue where minimum stirring of the soil is de-sired.

15

Wave/Fluted and Rippled Coulter Measurements

Diameter(D)

(T) Thickness

(FH) Flute Height

Number of Flutes (NF)

(FCD) Flat CenterDiameter


*Standard edge for coulters. See page 32 for other edge styles.

Diameter(D)

Thickness(T)

Flat Center Dia(FCD)

Numberof

Ripples(NR)

PartNumber

Weight

Inches mm Gauge mm Inches mm Lbs Kgs

15 381 9 3.5 12 304.8 50 10249 6.1 2.8

15.8 401 8 4.0 12 304.8 50 10264 8.3 3.8

17 430 9 3.5 12 304.8 50 10294 8.3 3.8

17 430 8 4.0 12 304.8 50 10520 9.5 4.3

18 460 8 4.0 12 304.8 50 10316 10.7 4.9

20.4 520 8 4.0 14 355.6 60 10350 15.4 7.0

20.4 520 7 4.5 14 355.6 60 10336 14.9 6.8

22.6 576 7 4.5 14 355.6 60 10378 19.2 8.7

Rippled coulters offer excellent penetration and cutting with a minimum of soil disturbance.They are good for a wide variety of soil conditions.

Diameter(D)

Thickness(T)

Flat Center Dia(FCD) Flutes Part

NumberWeight

Inches mm Gauge mm Inches mm Number(NF)

Height(FH) Lbs Kgs

14 356 7 4.5 7 177.8 8 0.78˝ 10490 7.1 3.2

15.8 401 8 4.0 7 177.8 8 0.88˝ 10265 7.9 3.615.8 401 7 4.5 7 177.8 8 0.88˝ 10269 9.3 4.2

17 430 7 4.5 7 177.8 8 1.75˝ 10312 11.5 5.217 430 7 4.5 7 177.8 8 0.90˝ 10313 11.5 5.2

18 460 7 4.5 7 177.8 8 1.81˝ 10317 12.6 5.718 460 7 4.5 7 177.8 8 1.00˝ 10318 12.6 5.7

20.4 520 7 4.5 7 177.8 8 2.09˝ 10339 15.4 7.0

13 330 11 3.0 8 203.2 13 .056˝ 10219 4.3 2.0

14 356 7 4.5 8 203.2 13 .060˝ 10494 6.4 2.9

15.8 401 7 4.0 8 203.2 13 0.68˝ 10263 8.0 3.615.8 401 7 4.5 8 203.2 13 0.68˝ 10268 9.3 4.2

17 430 7 4.5 8 203.2 13 0.82˝ 10311 11.5 5.2

18 460 6 5.0 8 203.2 13 0.87˝ 10320 13.1 6.0

20.4 520 6 5.0 8 203.2 13 1.08˝ 10343 17.1 7.8

22.6 576 7 4.5 8 203.2 13 1.26˝ 10376 19.2 8.722.6 576 1/4˝ 6.0 8 203.2 13 1.22˝ 10388 27.6 12.5

13 330 11 3.0 9.4 238.8 25 .059˝ 10218 4.3 2.0.

14 356 8 4.0 9.4 238.8 25 0.63˝ 10482 6.4 2.9

15.8 401 8 4.0 11.6 294.6 25 0.63˝ 10262 8.3 3.8

17 430 8 4.0 11.6 294.6 25 0.63˝ 10304 10.1 4.6

20 520 8 4.0 11.6 294.6 25 0.63˝ 10349 15.4 7.0

16

Wavy Coulters

Wavy and flutedcoulters are de-signed to cutthrough groundresidue and opena strip in the soil.

Rippled Coulters

Hole Configuration

OEM Reference Used On Center Hole

Bolt CircleDia.

Bolt Holes

HoleNo.

FFlex King, Miller Weeder,

Noble/Versatile, Roll-a-Cone,Sunflower, others

41/8˝ 51/2˝ (5) 17/32˝ 63

H

Hiniker, Black Machine, BrillionDMI, Glencoe/Farmland,

Haybuster, Landoll, Sukup, UnitedFarm Tools, Wil-Rich/Noble,

21/2˝ 4˝ (4) 17/32˝ 81

IH IH older style, others 31/32˝ x 111/32˝ 31/4˝ (6) 11/32˝ 51

IHN IH newer style including 720,800, others 11/2˝ 41/2˝ (4) 17/32˝ 52

JDJohn Deere HS and NU

bottoms (non-metric) Yetter,others

2˝ 31/2˝ (6) 13/32˝ 53

17

Coulter Hole Configurations

Diameter(D)

Thickness(T)

WeightPackQty

Remarks

Inches mm Gauge mm Inches mm

16˝ 406 7˝ 4.5 8.80 4.0 75/bolt slotted cluster hole pattern

17˝ 432 6˝ 5 11.03 5.0 75/bolt slotted cluster hole pattern

only

18˝ 459 6˝ 5 13.10 6.0 75/bolt slotted cluster hole only

20˝ 508 6˝ 5 17.27 8.0 75/bolt slotted cluster hole and single

1.75˝ shaft size hole

20˝ 508 1/4˝ Heavy 6.5 22.40 10.0 60/bolt 1.75˝ shaft center hole only

22˝ 559 6˝ 5 21.50 9.75 60/boltslotted hole cluster and single

1.75˝ shaft size hole

22˝ 559 1/4˝ Heavy 6.5 27.50 12.5 50/bolt 1.75˝ shaft hole only

VT Wave Configurations

Hole Configuration OEM Reference Used On Center

HoleBolt Circle

Bolt Holes

HoleNo.

JDD John Deere 750 drill, others 3˝ 43/8˝ (4) 13/32˝ 80

JDM John Deere NU 450 (metric bottoms), Yetter,others 21/8˝ 43/4˝ (5) 33/64˝ 55

K Kinze, Black Machine, others 2˝ 33/8˝ (6) 33/32˝ 83

MF Massey Ferguson, others311/64˝(3.172) 43/4˝ (4) 15/32˝ 62

MLWR

Melroe/Wil-Rich, Acra Plant, Ag Systems,Bigham Bros., Caldwell-Hamby, DMI, Flexi-Coil,Harrell, Landoll, Marliss, Monroe/Tufline,

Noble, Sunflower, Thurston/Blu Jet, Tye, UnitedFarm Tools Wetherell, Wiese, York Agri Prod.,

others

311/16˝ 5˝ (4) 17/32˝ 78

OL Oliver/White, Great Plains, KBH, others 4˝ 51/4˝ (4) 17/32˝ 69

ITGDual function slotted hole pattern can be used in place of #78 and or #69�

(1/2� flat washer required)4˝ 51/4˝ (4) 17/32˝ 89

ORT Orthman, others 211/16˝ 41/4˝ (4) 13/32˝ 84

R Rawson, others 33/4˝ 5˝ (6)7/16˝ 55

S Simba, others 213/32˝ 429/64˝ (5) 33/64˝ 79

18

19

Planting and Seeding Discs

Leading the way to successful planting.

Everything you do, all year ‘round is dependent onsuccessful seed planting at the beginning of theseason. That’s why it’s so important to choosethe industry’s most reliable openers. Made withan exclusive alloy of boron steel and availablewith the exclusive ResidueRazor™ edge,these openers from Ingersoll offer unsur-passed performance in the field. Available as either plain or assembledunits. Not only are Ingersoll assembliesmade to exact OEM spec’s using OEMapproved bearings and hubs, but we caneven provide these assemblies withheavy duty bearings and hubs for no-tillplanting and seeding applications.

Plain OpenersDiameter (D) Thickness (T) Part

NumberWeight

Inches mm Gauge mm Lbs Kgs13.5 343 11 3.0 10426 4.0 1.8

14 356 9 3.5 10437 5.7 2.6

15 381 11 3.0 10445 5.6 2.615 381 9 3.5 10452 6.6 3.015 381 8 4.0 10456 7.5 3.4

15.8 401 9 3.5 10459 6.8 3.1

18 460 8 4.0 10463 10.9 5.018 460 6 5.0 10322 13.1 6.0

22.6 576 1/4˝ Heavy 6.5 10393 26.8 12.2

Plain openers are made with our exclusive boron steel alloy that offers excellent wearcharacteristics for a longer useful life.

Covering Assembly DiscDiameter (D) Thickness (T) Part

NumberWeight

Inches mm Gauge mm Lbs Kgs13.5 343 11 3.0 10426 4.0 1.8

Diameter (D) Thickness (T) Fits Shaft

Part Number

Weight

Inches mm Gauge mm Lbs Kgs Remarks

8 203 12 2.5 5/8˝ 10408 2.2 1.0

13.5 343 11 3.0 5/8˝ 10427 4.6 2.1

14 356 12 2.5 5/8˝ 10433 4.2 1.9

14 356 9 3.5 5/8˝ 10438 6.5 3.0 Standard Bearing RH

14 356 9 3.5 5/8˝ 10439 6.5 3.0 Standard Bearing LH

14 356 9 3.5 5/8˝ 10499 7.0 3.2 Heavy Duty Bearing RH, Standard Blade

14 356 9 3.5 5/8˝ 10500 7.0 3.2 Heavy Duty Bearing LH, Standard Blade

15 381 9 3.5 10450 7.6 3.4 Standard Bearing

15 381 9 3.5 3/4˝ 10501 8.1 3.7 Heavy Duty Bearing with HD Hub

15.8 401 9 3.5 3/4˝ 10253 8.5 3.9 Heavy Duty Bearing with HD Hub

Assembled openers are available with standard bearings or a specially designed heavy-dutybearing.

20

Assembled Openers

Planting and Seeding Disc Measurements

Diameter(D)

(T) Thickness


*Standard edge for openers. See page 32 for other edge styles.

Ingersoll Innovations

21

SoilRazor™ CTThe new SoilRazor CT disc from Ingersoll isone of the most exciting new products to comealong in many years.The unique saw-tooth design is extremely

well-suited for cutting through the toughest ofresidue and penetrating deep into the soil.The SoilRazor CT has excellent clod-crushing

capabilities at normal working speeds and yields

superior performance in soft soils.What’s more, as the cutting edge wears

away, it actually becomes more aggressive. Soyou can continue to work with it for seasonafter season, even in the toughest ofconditions. So if you’re looking for long servicelife in an aggressive disc, be sure to take acloser look at the SoilRazor from Ingersoll.

Diameter (C) Thickness (T) Concavity (C) Part NumberInches mm Gauge mm Inches mm

22 560 8 4 2.17 55 1053022 560 6 5 2.17 55 1060124 610 6 5 2.75 70 1060424 610 1/4˝ 6 2.75 70 1053126 660 6 5 3.54 90 1053226 660 1/4˝ 6 3.54 90 1053326 660 5/16˝ 8 3.54 90 1053428 711 1/4˝ 6 4.13 105 1053528 711 5/16˝ 8 4.13 105 1053630 762 5/16˝ 8 4.80 122 1055130 762 3/8˝ 9.5 4.80 122 1055230 762 1/2˝ 12.5 4.80 122 1055332 813 5/16˝ 8 4.80 122 1053732 813 3/8˝ 9.5 4.80 122 1053832 813 1/2˝ 12.5 4.80 122 1053936 915 1/2˝ 12.5 5.12 130 10540

SoilRebel ™NEW

1.25” square x 1.5” round shafts

20” and 22” diameter x 5mm thick available

20” 17.25 lbs 80 per bolt

22” 21.2 lbs 80 per bolt

part # CL4457

part # CL4459

22

VT Wave ™

NEW

BOL

23

Diameter (D) Thickness (T) WeightLbs

Part Number

RemarksInches mm Gauge mm16 406 7 4.5 4.00 4461 ITG # 89 (slotted cluster)17 432 6 5 5.00 4566 ITG # 89 (slotted cluster)18 459 6 5 6.00 4462 ITG # 89 (slotted cluster)20 508 6 5 8.00 4463 ITG # 89 (slotted cluster)20 508 6 5 8.00 4468 1.5” square and 1.75” round20 508 1/4” heavy 6.5 10.0 4465 1.5” square and 1.75” round20 559 6 5 21.50 4464 ITG # 89 (slotted cluster)22 559 1/4” heavy 6.5 27.50 4466 1.5” square and 1.75” round

ResidueRazor™Take a close look at the two disc bladeedges below. The one on the right side hasthe unique Ingersoll ResidueRazor™ edge.The one on the left is an ordinary edge, thekind you’ll find on many competitive blades.Now imagine that you’re out in the field, cut-

ting through the residue of last season’s crop.Which blade would you rather have? With theone on the left, you’re missing the point.With the ResidueRazor, we use carbide

cutters to create an edge that’s five timessharper than any ordinary blade. So when a ResidueRazor goes up against

genetically engineered corn or soybean

residue, it’s no contest. Wheat and barleystraw? Like a hot knife through soft butter.And because ResidueRazor blades aremade by Ingersoll, they’re made fromIngersoll’s own proprietary boron steel –amazingly hard and flexible at the sametime.Not to put too fine a point on it, but if

you’re looking for sharp performance from along-lasting, efficient, high quality blade,there’s only one that makes the cut. To order discs with the ResidueRazor

edge, talk to your Ingersoll sales rep.

24


25

RadialRazor™Ingersoll Innovations

The RadialRazor from Ingersoll features apatented asymmetrical wave pattern. In the illustration at the right, notice the dif-

ference between the rising slope of eachwave and the descending slope. This allowsthe blade to cut progressively at higherspeeds with minimum effort, reduced soilstirring and reduced humidity loss.

In wet or dry earth, the RadialRazor worksregardless of soil type or degree of residue.Because of the patented wave pattern,side wall compaction has been reducedover typical wavy coulterdiscs. It’s another excit-ing innovation fromIngersoll.

Diameter (D) Thickness (T) Flat Center Diameter (FCD)

Number ofFlutes(NF)

FluteHeight

Part Number

Inches mm Gauge mm Inches mm14 355 8 4 8.27 210 20 .16˝ 10546

15 381 8 4 8.27 210 20 .22˝ 10547

16 406 8 4 8.27 210 20 .22˝ 10548

17 432 8 4 8.27 210 20 .22˝ 10549

18 457 8 4 8.27 210 20 .22˝ 10550

26


Rollable BoronA genuine benefit to boron alloy steel is itshardness, and our exclusive boron alloy isas hard as any disc steel made in the world.The only problem with hard steel is that

it’s almost impossible to roll the edge to afine sharp edge. Until now. Ingersoll metal-lurgists have worked tirelessly to develop analloy with the toughness and durability of

boron while maintaining the ability to roll theedge. This means that if you can enjoy thebenefits of boron alloy steel and still refreshthe disc edge in a roller. Rollable Boron discs are available in the

sizes shown below. For custom sizes, seethe ordering chart on page 34 of this cata-log.

Diameter (D) Thickness (T) Concavity (C) Part Number

Weight


22 560 1/4˝ Heavy 6.5 2.5 65 620 mm 10514 27.5 12.5

24 610 1/4˝ Heavy 6.5 3.1 78 620 mm 10515 33.4 15.2

27


Heavy Duty OpenersTo meet the most demanding conditions inthe field, our assembled openers are nowavailable with specially designed heavyduty caged and shielded ball bearings. Ofcourse, you can still order assembled

openers with standardbearings or order plainopeners without abearing assembly.

Diameter (D) Thickness (T) Fits Shaft

Part Number

WeightInches mm Gauge mm Lbs Kgs Remarks14 356 9 3.5 5/8˝ 10499 6.5 3.0 Heavy Duty Bearing RH, Standard Blade14 356 9 3.5 5/8˝ 10500 6.5 3.0 Heavy Duty Bearing LH, Standard Blade15 381 9 3.5 3/4˝ 10501 7.6 3.4 Heavy Duty Bearing with HD Hub15.8 401 9 3.5 3/4˝ 10253 8.0 3.6 Heavy Duty Bearing with HD Hub

28


DuraFace™ Discs — PlainThe patented DuraFace process yields adisc that’s nearly as hard as tungsten car-bide but without the brittleness. What’smore, it’s almost as corrosion resistant asstainless steel but without the high cost.

The result is a disc like nothing you’veever seen before. It lasts a long long timeand remains sharp even when it faces offagainst the worst soil conditions you canthrow at it.


WeightInches mm Gauge mm Inches mm Radius (CR) Lbs Kgs24 610 1/4˝ 6 3.1 78 620 mm 10234 33.6 15.3

26.5 673 1/4˝ 6 3.4 87 675 mm 10237 37.5 17.0

28.5 7241/4˝Heavy

6.5 3.7 95 710 mm 10303 43.619.8

28.5 724 5/16˝ 8 3.7 95 710 mm 10325 58.2 26.5

30 762 5/16˝ 8 4.1 104 710 mm 10449 61.9 28.1

29


DuraFace™ Discs — NotchedThe DuraFace discs are available in twoIngersoll Express styles: Plain and notched.The notched version features the

DuraFace coating laid on top of a notcheddisc for a very aggressive cutting edge that

is well-suited for soil penetration.You may have tried other “hard-faced”

discs in the past, but our customers tell usthat nothing comes close to the unique,patented DuraFace from Ingersoll.


Weight

Inches mm Gauge mm Inches mm Radius (CR) Lbs Kgs24 610 1/4 6 3.1 78 620 mm 10340 29.5 13.4

26.5 673 1/4 6 3.4 87 675 mm 10355 33.9 15.4

28.5 7241/4

Heavy6.5 3.7 95 710 mm 10357 43.6 19.8

28.5 724 5/16 8 3.7 95 710 mm 10370 58.2 26.5

30 762 5/16 8 4.1 104 710 mm 10377 60.4 27.5

32.5 826 5/16 8 5.0 127 710 mm 10419 72.9 33.1

32.5 826 1/2 10 5.0 127 710 mm 10386 90.3 41.0

30


• Return your ResidueRazor discs to factory approved sharpness.• Sharpen ResidueRazor disc blades right on the gang.• Simple design allows quick and easy setup to the disc gang.• Patent pending EdgeCare cold sharpening technology extends blade life.• Unique EdgeCare inside ground bevel profile does not reduce blade diameter.• Ensures that the disc maintains factory approved hardness and ductility.

PLUS

tillage and planting products catalog - ingersoll tillage · 4 product selection chart discs plain...

Documents