tdg stowmarket aerosol cage
TRANSCRIPT
Aerosol Cage - TDG Stowmarket
When a major third party logistics
company wanted to create an aerosol
containment store within their existing
Pallet Racking system they called our
Project Sales Manager – Lance
Merryweather.
Listening to their requirements Lance
advised that the best solution would be an
all 25mm x 25mm steel mesh partition
system. Two partition walls would be
constructed to a height of over 10 meters
between two double entry runs of Pallet
Racking and one partition wall would be
constructed along the front to form an
enclosure, with the building acting as the
forth side. The screens would be cut to
suit the buildings ceiling profile. Fitted with 2no 1,000mm wide single side hung doors each fitted with
break glass bolts. Racking Frames/uprights along these runs would be extended to the full overall height of
the roof shape to enable the top lift of standoff brackets to be bolted in position.
Lance also suggested a self closing sliding
Door sliding door for fork-lift truck
entry/exit fitted with a simple counter
balance and cable mechanism to operate
in a self closing manner when activated
by the fire alarm.
The project was ordered and materials
including racking materials to extend
supporting uprights were delivered with
a short lead-time. The project was
completed in two weeks to the complete
satisfaction of the customer.