sparkling diy earrings projects work a pair of diy dangle earrings
TRANSCRIPT
Sparkling DIY earrings projects-work a pair of DIY
dangle earrings
Here is something amusing and feminine for both
girls and ladies to wear-a pair of dazzling DIY
dangle earrings. What’s more, for giving the
dangle earrings more radiant appearance I
choose the cat eye beads as main part of them.
The fascinating light and gorgeous gloss will help
your design more impressive.
Supplies needed in DIY dangle earrings:
8mm cat eye bead
4mm Bicone glass bead
Headpin
Eyepin
Brass chain
Earring hooks
Wire-cutter Plier
Side Cutting Plier
Round Nose Plier
How to DIY dangle earrings?
Step1: components’ preparation
1. Slide one 8mm cat eye bead onto the eyepin.
Loop the end with 6mm long pin tail. Remove the
excess part. Make 7 groups;
2. Thread three pieces cat eye beads onto a long
eyepin. Loop the end;
3 String the 8mm cat eye bead onto the headpin
along with one 4mm Bicone glass bead. Form a
loop at end in same way. Do another 2 pairs;
4. Snip a fraction of brass chain, approximately
5cm.
Wanna to learn how to DIY earrings? You can do this; it is exactly easy and amusing to work
with! Customize pairs of DIY dangle earrings with whatever beads and chains you prefer!
Step2: assemble all the above elements
So, that’s your new pair of DIY dangle earrings. From the materials collection to conclusion, it only
takes me less than twenty minutes. All that said-I love them extraordinarily, and I’m wondering to
work more DIY earrings in similar versions.
Get different kinds of beads and charms please visit our web:
http://www.pandahall.com/
1. Place all well-prepared elements on flat as the
picture show;
2. Open the loops at ends and assemble your
DIY earrings.