seismic design criteria for bridges and other highway
TRANSCRIPT
NATIONALCENTER FOREARTHQUAKEENGINEERINGRESEARCH
ISSN 1088-3800
Seismic Design Criteria for Bridges and Other Highway Structures
by
C. Rojahn, R. Mayes, D.G. Anderson, J. Clark, J.H. Hom, R.V. Nutt and M.J. O’Rourke
Technical Report NCEER-97-0002
April 30, 1997
This research was conducted at the Applied Technology Council and was supported by the Federal Highway Administration under contract number DTFH61-92-C-00112.
NOTICEThis report was prepared by the Applied Technology Council as a result of research sponsored by the National Center for Earthquake Engineering Research (NCEER) through a contract from the Federal Highway Administration. Neither NCEER, associ-ates of NCEER, its sponsors, the Applied Technology Council nor any person acting on their behalf:
a. makes any warranty, express or implied, with respect to the use of any informa-tion, apparatus, method, or process disclosed in this report or that such use may not infringe upon privately owned rights; or
b. assumes any liabilities of whatsoever kind with respect to the use of, or the damage resulting from the use of, any information, apparatus, method, or process disclosed in this report.
Any opinions, findings, and conclusions or recommendations expressed in this publica-tion are those of the author(s) and do not necessarily reflect the views of NCEER or the Federal Highway Administration.
ISSN 1088-3800
State University of New York at BuffaloRed Jacket QuadrangleBuffalo, New York 14261Telephone: 716/645-3391FAX: 716/645-3399
NATIONALCENTER FOREARTHQUAKEENGINEERINGRESEARCH