IndiaAgartala

IndonesiaJakarta

KazakhstanAlmaty

KyrgyzstanBishkek

RussiaMoscowand roads around

SudanKhartoum

Saudi ArabiaDammam

Macedonia (FYROM)Skopjeand roads around

BotswanaGaborone

GermanyBremenBispingenFrankfurtHeinsbergHemer

GreeceAthensand roads around

IsraelTel Aviv

RomaniaBucharest

SloveniaLjubljanaSlovenska Bistrica

UAEDubai

Sundrax Electronics is a pioneering developer and manufacturerof hardware and software for lighting control. The company’smission is to design innovative, turn-key, fully integrated solutionsfor almost every single area of the lighting industry: Whateveryour requirements are, we can provide you with reliableand project-oriented products for road & street, architectural,and stage lighting management. Working in the field of lightingcontrol solutions for more than 14 years, Sundrax Electronicshas grown to become an industry leading developerand internationally recognized company with Head Office in London,UK, and a Regional Office in Moscow, Russia.

This catalogue is dedicated to the QULON System — our affordablypriced yet incredibly advanced and reliable road and street lightingmanagement system, unmatched in terms of scalability and flexibilityand supported by a first-class customer service worldwide. Proceedto the next pages to find out how we can create together a brighterand sustainable future.

Providing the worldwith smart systemsfor over 14 years

DrawingA FINELINEWe all share the desire to live in a safer and greener environment:At Sundrax Electronics we focus our efforts on developing smarttechnologies that provide better lighting both functionallyand aesthetically, helping companies and local communitiesto improve people’s quality of life by creating efficient and visuallyunique infrastructures, as well as preserving the environmentby drastically reducing their carbon footprint. From small townsto megacities, municipal governments all over the world are facinghuge challenges presented by this fast and demanding processof urban transformation. The increasing costs of infrastructuresand utilities, the limited budgets as well as the pressureof environmental issues and strict regulations are some of the biggestobstacles to this renovation: As a company we are well awareof these issues, and we can find the best option for your needsin the vast range offered by our QULON Light Management Systemportfolio of solutions.

Let us provide you with a project-oriented, intelligent and costeffective design to optimize your lighting infrastructure, whetherfor a road, parking lot, street, highway, industrial complex, railway,airport or else, and start saving energy today, optimizing costsand defending the environment.

35,000 kWh or £5,000is saved each yearper 1 km of motorway withintelligent light managementin the UK

40% of energy and50% of maintenancecosts may be saved by smart lightmanagement only.

Up to 40% of city energy budgetsare spent on outdoor lighting.

WHY QULON5 ADVANTAGES OF OUR SYSTEM

Our strict Quality Control Procedures provide extreme performanceand reliability for a fail-proof control of any luminaire type. We keepall stages of production under strict control as every module is designedand manufactured by Sundrax exclusively. We equip our QULON moduleswith short-circuit resistance and over-voltage protection up to 315 V;All of our components have been tested over time and in extreme weatherconditions from the hottest deserts of Central Asia to the severely lowtemperatures of Russian Polar Regions. This is why we confidently provideyou with full 3-year warranty (free of charge) and a 24/7 online technicalsupport for our products.

Reliability

Challenged by the diverse demands of our customers, we managedto design the most flexible modular solution in the world. QULON Systemsare professionally tailored for any kind of light and budget. Simply addor remove existing modules to create a kit that is perfect for your lightingmanagement needs. Upgrade your system at any time to keep up withthe evolving smart city requirements by simply installing additional modules.This modular nature is what makes QULON a simple yet very powerful system.Our highly precise SCADA compatible modules provide control throughany existing communication channel including radio channels, GSM, 3G/GPRS,Ethernet, as well as through existing Powerlines (PLC) or even scheduledautonomously in case there is no connection to remote areas. We designedthe QULON System on open standards, which makes it compatible with otherdata management systems of your smart city, including architectural lighting.

QULON systems are easily integrated into the existing lighting infrastructure.There’s no need to change your lamps or poles to experience the full controlfunctionalities of QULON, as the modules are installed straight into the powercabinets: our plug-and-play components require no additional skills or wiring.This technology allows a substantial reduction of maintenance costsand provides a better perception of the environment and an improved experienceof lighting while maintaining the original design of your luminaires and facilities.The QULON System Software includes integrated architectural lighting controlswhich provide the perfect solution for smart monitoring and managementof each and every lighting facility, all from a unique interface.

Scalability

Seamless integration

Use our innovative technology to drastically reduce your energy consumption,cutting down CO2 emissions and enhancing the green perception of your smartcity. We can employ motion sensors, dimming devices, soft-start, and otherdynamic lighting features to achieve energy savings of up to 70% only by properlighting management compared to conventional systems. We do not keep yoursavings virtual: Our software provides, amongst other readings, detailedreal-time reports of both energy and financial savings at no additional cost.This real time monitoring feature also allows reporting of the network conditionsand failure of any lamp at its exact location, which offers the opportunityfor a significant reduction of maintenance costs through the strategic deploymentof maintenance teams and a proven prolonged bulb life. Sundrax systemscan help you to manage your lighting network responsibly and in an energyefficient way.

Energy efficiency

A wide range of internal functionalities with extensive report featuresand auxiliary sensors provide an unbelievable level of control of your lightingsystem, by collecting various parameters of the network such as current,voltage, energy consumption, phase shifts, current frequency, power factorand many more. Light level scheduling, motion sensors, lamp burnout detection,real-time financial savings reports in your currency, weather and traffic data,temperature sensors enable the highest possible level of lighting managementand optimization.

Wide functionality

The System is easy to operate and requires minimal skills from staff.QULON provided a perfect tool to significantly simplifythe maintenance of the power lines of the Caspian Roads FederalAgency (over 150 facilities), reduce the maintenance time and costsfor maintenance company as well as for us as the owners of the facilities.

— Dmitry VasilievChief Power Engineer of CaspianRoads Federal Agency, Russia

“”

The QULON System provides a unique wayto centralize the remote management of architecturaland street lighting in one software and on one server.Once integrated, the QULON System provides seamlessmanagement for street and architectural facadelighting with an all-in-one solution.

To receive more details and information on the functionalitiesof our architectural lighting management system please requesta MONARQ brochure.

ALL-IN-ONEStreet Lighting Controls + Architectural Lighting Controls

Novy Arbat Avenue, Moscow

GROUP CONTROLStreet lighting management optimizationand energy savings for traditionallighting system

FEATURES:

KEY BENEFITS:Low installation and maintenance costsInstallation is performed into power cabinets in anycountry of the world, components are easily integratedin the existing lighting infrastructure. Immediate failurereporting and lamp replacement forecasts allowmaintenance support planning and obviate the needfor regular patrolling thus reducing maintenance costs.

Energy-effective Energy consumption is proven to be reduced by 40%with group control + dimming, and up to 75% with fullyintelligent central control and monitoring system comparedto old conventional lamps. Lower energy consumptionreduces CO2 emissions drastically. Energy monitoringmade easy as QULON System provides real time reportson energy consumption.

Fast paybackEven by choosing basic Group Control Solution you gethigh return on investment (ROI) for smart street lightingwith a top-ranked, unified lighting management systemwhich delivers rapid payback of investments and accuratelypredictable savings.

Easy upgradeDue to modular structure of the equipment, the systemcan be easily upgraded by adding new modules. Suchstructure helps to plan your future expenditures graduallyheading to smarter city technologies.

GSM, GPRS, 3G

SPECIFICATIONS: 105 x 210 x 75mm DIN-rail mount in the power cabinet4 relay outputs6 checkpoint inputsMax voltage 230V on inputs, 250 on outputs, 5A2 dry contact inputsWorking conditions: 100-250V, 50/60Hz, -40° to +60°C,IP23 protectionRemote control over GSM 1800/ 850/ 1900Transmit Power Range(s): Class 4 (+33dBm ±2dB) for EGSM 850/900Class 1 (+30dBm ±2dB) for GSM 1800/1900Settings over GPRS, SMS, CSD, 3GBuilt-in non-volatile clockRS-485 (MODBUS RTU) interface

On behalf of Amco Advanced Technologies I would like to thank SundraxElectronics for providing us with the centralized management systemfor street lights (QULON CMS). Following the installation of the QULONSystem close to Athens, the Sundrax software has been seamlessly integratedin our municipal web portal and now we can control the street lights usingour own web-based software.What we liked the most about QULON is that it is very affordable and allowsto start saving with the simplest group control solution and later enhancethe system based on our requirements using the same core modules.We value the expertise received and believe our cooperation with Sundraxwill continue in our future projects.

— Vaios Kakavas Head of Public Sector DivisionAmco Advanced Technologies, Greece

“

”

On/off schedulingIndependent control of each phaseData collection from electric metercurrent, power factor, cumulative power (kWh/kVAh), activeand apparent power, voltages, current and voltage per each phase etc

Identification of electrical faults GPS/GLONASS and astronomical clock onboard

Central Module QULON-C(Gateway)

ON ON OFF OFF

PHASEDIMMING

Start nowEven though Sundrax Electronics is dedicatedto develop the most innovative telemanagementsystems, our Group Control Solution still representsan affordable yet very powerful and cost-effectivealternative providing street lighting control toolsfor projects where individual control isn’t essential.While being easily integrated into any type of lightingnetworks without additional wiring, our basic solutioncollects data and provides diagnostic, scheduling,profiling, and even phase dimming tools.

Upgrade laterSundrax Electronics managed to develop a unique modularsystem that allows upgrades at any time simply by addingmore intelligent products to the existing components.Our Group Control solution is easily enhanced by addingmore complex telemanagement modules to create a fullyintelligent system, as all of them are based on the samecore module.

The additional dimming module QULON-D is a smart supplement thatstabilizes and controls voltage in three-phase networks with conventionallamps. By providing phase dimming in 180-245V range for 230V networks,QULON-D saves you up to 40% of energy costs and prolongs bulb lifetime through “soft start” technology.

This dimming module provides a wide range of diagnostic tools for outputpower lines as well as incorporating overload protection and short circuitresistance including built-in bypass for emergencies.

SPECIFICATIONS: Outdoor cabinet 800 x 900 x 280mmIP65 protectionInput 380/400 V, 3 phases + 0Max total power for 3 phases: up to 60 kWRegulates voltage in 180-245V with 5V pitchRemote control via GSMManual controlPower supply 130-300V, 50HzAny weather conditions (from -40 to +60 C)

40% energy savingsonly by phase dimming

FEATURES:On/off schedulingIndependent dimming of each phasePowerline voltage stabilizationData collection from electric meterIncreases lamp burning hoursNo need to change old lamp

GROUP CONTROL+DIMMINGStreet lighting management optimizationand energy savings for traditionallighting system

60% 60% 80%

205V170V

80%QULON-DDimming Module

STEP BY STEP

To learn more about Sundrax’s energysaving lighting management systemsand to order a free demo installation,call + 44 (0) 208 991 33 19or visit us at www.sundrax.com

Over 14 years of successful business Sundraxhas developed step-by-step program of projectimplementation that helps us to provide ourcustomers with precise turn-key solutions:

At the stage of network design we select the optimaltechnology (wireless or PLC) and determine whereto locate gateways to provide full coverage of the streetlights network using the minimum possible numberof gateways considering the location topographyand urban layout. Sundrax adopts an omni-comprehensiveapproach to design specific solutions that can satisfythe requirements of our customers and while paying greatattention to budget availability.

Before investing time and resources on a fullinstallation, Sundrax specialists choose a small areato test the designed system. This approach givesus the opportunity to optimize the system andupdate it according to the results of the tests. Wealso offer free trial installations so that our customerscan experience the advantages of our solutionsand quality of our products before committingto an order. Although the QULON system is designed

to be operated without any special skills,Sundrax has developed specific trainingprograms and provides instructionsand guidelines based on the customer’sneeds.Based on the results of these tests, Sundrax can

customize each solution to ensure flawless resultsfor the installed street light management system.

Commissioning of the full version of street lightmanagement system that perfectly matchescustomer’s needs.

Sundrax provides free of charge full 3-Yearperformance warranty and 24/7 customer support.

Audit

Trial installation

Training

Tuning and installation

Full mode startup

Network design

Benefits of the systemReduces maintenance costsProvides perfect platform for energy savingsSignificantly cuts CO2 emissionsImproves public well-beingEasily enhancedSuitable for any lighting standardsFully integrated with 3rd party controland monitoring systems

Professional assessment of existing lightinginfrastructure is one of the key elementsfor a successful lighting management andshould not be underestimated. We offerfull technical inspections to establish projectsrequirements and collect data for tailored design.

12

3

4

5

6

7Support

FULLY INTELLIGENTSTREET LIGHTMANAGEMENT SYSTEMSWireless / Powerline lighting controlfor your smart city

QULON Gateways were installed for outdoor lightingmanagement of the Sochi 2014 Olympic Park providingsignificant savings for our client and safety and well-beingfor the guests of theXXII Winter Olympic Games.

WIRELESS SOLUTION

SPECIFICATIONS LiTouch Node LiTouch Gateway

Reliability of our wireless solution is ensured by fault-proof technology that makes it possibleto manage the lighting system even if GSM connection is temporarily down.

Technical characteristics — Wireless control nodeHousing — Solid plastic case, IP65Dimensions — 88(D) x 190(H) x 88(W)mmWeight — 0.3 kgOperating Temperature — -40…+70°CInput Voltage — ~100-250 VAC, 50/60 HzInput Power — 5WConnectors — Leads, Screw terminalsSensors — Motion sensor input, Embedded light sensorControl output interface — 1-10 V, DALI, PWM or Discrete outputCommunication with controller — LiTouch (ISM band 868/915MHz)Settings — Remote via Qulon LiTouch

Scenario scheduling and live remote controlFull management through built-in GSM/GPRS/3G modemWireless control in ISM band 868/915 MHz (up to 4 km)Access to electric meter and other sensors via RS-485Identification and immediate alert of electrical faultsWithstand voltage up to 305 VWorking temperature range — -40° – 70°CBuilt-in backup power supplyBuilt-in AC power supplyNon-volatile memory for data storageGPS/GLONASS and astronomical clock onboard72x105x75mmIP20Mounted on a DIN rail

ON OFF 80% 20%Qulon LiTouch LiTouch

moduleLiTouchmodule

LiTouchmodule

LiTouchmodule

Wireless lighting management +Smart presence detection

Individual lighting managementthrough LiTouch technology

SERVER

On the housing From the insideof the housing

On the NEMAsocket

3 options for LiTouch Node installation:

Wireless slave devices, installed into thehousing of each luminaire, and controlledby Qulon LiTouch via 800-950MHz radiochannel. Provide load control (on/off)as well as dimming function on luminaire.Compatible with 3rd party motion sensors.Installed only one per pole. In case thereare two luminaries on the pole, oneLiTouch module provides control for bothof them.

LITOUCH MODULE SOFTWAREWireless system is managed by anoperator remotely from a laptop oreven on-the-go from a cellphone.Big data is stored on the server soreports may be generated on the click.Qulon web-based database allows detailedanalysis of the system performance.

QULON LITOUCHQulon LiTouch is enhanced version of our classicQulon-C controller providing individual communicationwith nodes (slaves) using 800-950MHz wireless interface.In addition to its master functions, Qulon LiTouch controlsall electrical equipment in the cabinet, collects data fromelectric meter and other connected devices and sendslive status of overall QULON system to servervia GSM/GPRS /3G mobile network. Programmingof Qulon LiTouch and light scheduling are performedremotely from the software, additional access is providedvia Ethernet cable.

800-950MHz 3G, GSM, SMS

LiTouch is a technology for remote control and status data transmission via 868/915 MHznarrow-band wireless channel developed by Sundrax Electronics. The LiTouch systemis a great platform for Smart City and Internet of Things applications, providing a long-range,stable communication and data collection instrument. LiTouch takes advantage of low-speed2-FSK modulation in 868 MHz band (for Europe), or 915 MHz band (for US). The exactoperating frequency (channel) can be selected automatically or manually: Such flexibilityprovides enough space for several wireless networks to operate independently in the samearea with no interferences or disruptions. LiTouch provides half-duplex, “master-slave”communication between one central gateway (master) and a number of nodes (slaves).

Every node has unique number, which allows the gateway to address each one of themindividually. The gateway creates a network with nodes located in the same area (road,district, etc.), continuously polling nodes for their status and sending commandsto an individual node, group of nodes or to the entire network. In case nodes are scatteredover a large area that cannot be covered by the central gateway itself, certain nodes mayretransmit the signal from the central gateway to distant nodes and back, providing a stablecommunication across the entire network.

SPECIFICATIONS Simpline Node Simpline GatewayTechnical characteristics — PLC control nodeHousing — Solid plastic case, IP65Dimensions — 80(D) x 57(H) x 35(W)mmWeight — 0.3 kgOperating temperature — -40…+70°CInput Voltage — ~100-250 VAC, 50/60 HzInput Power (max) — 5WConnectors — Leads, Screw terminalsSensors — Motion sensor inputControl output interface — 1-10 V, DALI, PWM or Discrete outputCommunication with controller — Simpline (CENELEC EN 50065-1, band C)

Settings — Remote via Qulon Simpline

Scenario scheduling and live remote controlFull management through built-in GSM/GPRS/3G modemIndividual comtrol via power line (CENELEC EN 50065-1, band C)Access to electric meter and other sensors via RS-485Identification and immediate alert of electrical faultsWithstand voltage up to 305 VWorking temperature range — -40° – 70°CBuilt-in backup power supplyBuilt-in AC power supplyNon-volatile memory for data storageGPS/GLONASS and astronomical clock onboard72x105x75mmIP20Mounted on a DIN rail

We recommend Simpline solution if:Radio control is prohibited by state regulationsRadio connection is hindered by some physical obstacles thatcannot be avoidedStreet-light luminaire design forbids installation of 13 cmprotruding antenna of radio module(decorative luminaires, hystoric significance)

ON OFF 80% 20%QULON Simpline

Simplinemodule

Simplinemodule

Simplinemodule

Simplinemodule

SERVER

POWER LINE SOLUTIONIndividual lighting managementthrough Simpline technology

Mounted into the luminaire. It provides loadcontrol (on/off) as well as dimming functionof luminaire. It is also compatible with 3rdparty motion sensors. PLC interface operateson CENELEC EN 50065-1 standard in132.5kHz frequency band.

SIMPLINE MODULE SOFTWAREPowerline system is managed by anoperator remotely from a laptop or evenon-the-go from a cellphone. Big data isstored on the server so reports may begenerated on the click. Qulon web-baseddatabase allows detailed analysis of thesystem performance.

QULON SIMPLINEQulon Simpline is enhanced version of our classicQulon-C controller providing individual communicationwith nodes (slaves) using existing power lines.In addition to its master functions, Qulon Simplinecontrols all electrical equipment in the cabinet, collectsdata from electric meter and other connected devicesand sends live status of overall QULON system to servervia GSM/GPRS /3G mobile network. Programmingof Qulon Simpline and light scheduling are performedremotely from the software, additional access is providedvia Ethernet cable.

On the housing Inside ofthe pole

OEM insidethe housing

3 options for Simpline node installation:

Simpline is a technology for remote control and status data transmission via 230V ACpower lines developed by Sundrax Electronics. The Simpline system is a great platformfor Smart City and Internet of Things applications, providing a stable communicationwith the different types of fixtures connected to the powerline that require permanentattention from the operator/supervisor. Simpline complies with European StandardCENELEC EN 50065-1, and uses narrow-band modulation in C-band. Each electricdevice connected to the power line is equipped with filtering inductances to avoid signalsuppression. Simpline signal network is decoupled from the rest of the power distributionsystem using appropriate filtering inductances as well.

Simpline provides half-duplex, “master-slave” communication between one centralgateway (master) and a number of nodes (slaves). Every node has unique number,which allows the gateway to address each one of them individually. The gateway alsocreates a network of nodes connected to the same power line by continuously pollingnodes for their status and sending commands to an individual node, group of nodesor to the entire network. In case the power line used by a Simpline gateway controlis too long or noisy, certain nodes may retransmit signal from the central gatewayto distant nodes and back providing a stable communication across the entire network.

PLC 3G, GSM, SMS

SPECIFICATIONS LiteWide NodeMechanicalHousing — Solid caseMaterial — PlasticDimensions, mm — 84(D) x 48(H) x 84(W)Mass — 0.2 kgMounting — Luminaire case, pillar, e.t.c

EnviromentalOperating Temperature — -40...+70°CStorage Temperature — -50...+80°COperating Relative Humidity (max) — 100%IP Rating — IP 65Certification — CE, RoHSWarranty — 36 Month (Return to base)

Interfaces and ProtocolsControl output interface — 1-10 V/ PWM, DALI,Discrete or DMX512 outputNavigation — GPS/GLONASSRadio Channel — GSM 850/900/1800/1900Transmit Power Range(s)— Class 4 (+33dBm ± 2dB) for EGSM 850/900;— Class 1 (+30dBm ± 2dB) for GSM 1800/1900

Power & ElectricalInput Voltage — ~100-270 VAC, 50/60 HzInput Power (max) — 5 WMax load Power — 1000 W

Inputs/ OutputsConnectors — Leads, NEMA socketSensors — Motion sensor input, Embedded light sensor

Configuration / IndicationSetup — Remote via softwareIndication — LED

Key FeaturesVersions with open wires and NEMA plugWaterproof case IP65Individual lighting control without additional wiresEmbedded light sensorEmbedded GSM antennaEmbedded GPS/GLONASS receiverEmbedded triac for load switching on/offScheduled on/off and dimmingAutomatic node positioning on the mapMotion sensor input

ONLiteWide Node

GSM SOLUTIONControl your lights individually and directlyconnect them to server and software through GSM

60% 80% 40%

SERVER

GSM

LiteWide – decentralized wireless management systemfor territories with high density of buildings or mountainousterrain, and for regions where legislation prohibits to useradio transmission. Each LiteWide node has built-in GSMand connects directly to the server: The lights areprogrammed straight from software without any sortof intermediate gateways. LiteWide takes advantageof the existing GSM network, which allows a quickerand easier deployment.

The QULON Server is based on a PC platform and has a cloud baseddatabase that can store data from an unlimited number of luminaires.We offer the option to host the server on our servers or on the client’s.Regardless of the chosen option, you will be astonished by the manycapabilities that the database and server provide to our clients.

EASY MANAGEMENT WITHQULON SOFTWARE

QULON Software is carefully crafted to be powerful and user-friendly at the same time.We offer both web-based and separate client software solutions.

QULONSERVER& DATABASE

User accesslevel management

Storage of informationabout energy consumption

Easy Web accessto the database

Real-time or scheduledsavings reports

Database grouping,filtering and updatingactions

Advanced reporting toolsand performance graphs

DAILY REMOTE MANAGEMENTDisplay of remote objects and their statusImmediate failure reportingLive remote dimming & schedulingDimming & scheduling based on customscheduleMultilevel secured user access systemLamp replacement forecasts

VISUAL REPORTSFlexible reporting toolsReports from various additionalsensors such as weather and trafficAnalytic tool that shows real-timeinformation about power consumptionand financial savings

VERSATILE SOLUTIONAstronomical clock that correctsequipment parametersGoogle Maps compatibilityOPC support allows integrationwith any 3rd party softwareiOS/Android compatibility

OUR FULLY INTELLIGENTSYSTEM IS:

EfficientSystem operators can easily interact withthe lighting control system, monitor livedata from the lamps and perform on/offand dimming operations for lampsand entire groups of lamps.

The System wirelessly switches on/off or dimsfrom 0 to 100% single lamps, phases, or groupsof lamps to prevent over-lighting or under-lightingof given areas.

Direct

Fast connectionAccurate reportsEasy installation

Remote management

Fully intelligent system by Sundrax:

The QULON System allows constant remotecontrolling of energy-usage parameters,including power, voltage, current, temperatureand actual runtime or work time of luminaires.

Handy

LiTouch and Simpline modules (wireless or PLC)fit into any conventional lamp with electronicballast, as well as into any LED using a DALI, 1-10Vor PWM interface and CENELEC C for PLC solution.

Future-proof

Due to the modular structure of the equipment,our system can be easily upgraded by adding newmodules. Such structure helps to plan your futureexpenditures consciously, heading to smarter citytechnologies step by step.

Flexible

SuburbsGroup control: phase dimming,simple group lighting management.

Park, recreation zoneLED lighting. Individual lamp control.Motion sensors turn on the lightsonly where needed.

Central streetLED lighting. Individual lighting control.Integration with architectural lighting.Energy saving dimming from 12 to 6 AM

Bus stop, pedestrian crossingLED lighting. Individual flexible dimming profiles.Power supply from solar panel. 0% consumption.

HighwayGroup control. Traffic intensity sensor.Dimming profiling based on traffic intensity.

Sundrax’s QULON Nodes operate in a mesh network,meaning that they can transmit data to one another:This technology allows one QULON Gateway to controlan unlimited number of nodes.

FTP

SCADAOPC

SQL

API,dll

E-MAIL

QULONsoftware

XML

reports in PDF,XLS, DOC, RTF

SMART CITYSOLUTIONThe control nodes in our wireless solution may also be equippedwith motion sensors that automatically dim the lights whenno pedestrian or vehicle activity is detected in the areaand increase the light intensity when a movement is detected.This energy-effective function is the perfect smart solutionfor car parks, quiet residential areas, schools and universities,recreational areas, embankments etc.

QULON software is designed to transmit data in differentformats and via different media and protocols.QULON’s hardware and software are easily integratedInto any existing municipal supervisory control and dataacquisition system to provide remote control of outdoorstreets and architectural lighting.

INTELLIGENT TUNNEL LIGHTINGSpecific control solutions for a safer and more comfortabletunnel lighting adjustment

KEEPING IT VISIBLEIntelligent adjustment of the luminance level is very important in tunnel accessand exit zones to guarantee a correct visual perception of drivers at any timeof the day or night. The luminance meter integrated into QULON Photo visualmodule allows the system to adjust automatically the intensity of tunnel lighting,based on the measured intensity of natural light.

Daytime Lighting ManagementThe luminance meter sends information about measured intensity of natural lightto the software, that increases lighting intensity in the access zone of the tunnelin the daytime, helping drivers’ eyes to adapt and avoid the so-called black holeeffect. Moderate dimming is present in the central portion of the tunnel whilein the exit zone luminance is again increased for smoother visual adaptation.

Night-Time Lighting ManagementAt night, the lighting level inside the tunnel is kept in full accordance with the oneon the road outside, to avoid blind spots and guarantee an optimal perceptionof any obstacles in any part of the tunnel access/exit zones for the drivers.

QULON PhotoHi-res photo camera withluminance meter and night view modeDesigned to monitor road conditions onsite and transfer hi-res snapshotsto control room

3G/GSM/HSPA modem onboard

Die-cast waterproof metal casing with built-in power supplyand thermo cover

Integrated into QULON software for street lighting control

Luminance meter or night view mode

ADAPTIVE LIGHTINGRoad lighting management based on traffic volumeand weather conditions

QULON TrafficTraffic intensity sensor

Multi-lane measurement up to 6 lanes

Works at long distances (37 meters max)

Classifies vehicles by their length

Die-cast waterproof metal casing with built-in power supply

Remote control and monitoring through QULON software for street lighting management

GSM/GPRS/EDGE onboard

Traffic-based lighting management is a smart solution for roads with highly fluctuating traffic volumes.Lighting intensity is modified based on the hourly statistics collected by QULON Trafficto ease the strain on the environment and city budget. In addition, QULON Traffic is usefulto collect traffic stats at the pre-design stage for planned changes in lighting infrastructure.

QULON MeteoCompact pole-mounted

weather stationMeasures air temperature, relative humidity and atmospheric pressure

Remote control and monitoring through QULON software for street lighting management

Easy mounting

Plastic waterproof box with optional protective shield

Adverse weather conditions usually require higher level of lighting intensity to increase security,safe conditions on the roads and public well-being. QULON Meteo provides city operators

with live weather information for better lighting adjustment to the environment.

Qulon Helios (ex Qulon-SPM)provides management and control ofstand-alone lighting systems.

Solar panels and photovoltaic cells collect solar energy during the dayand store it in a rechargeable battery. This intelligent controller regulatesbattery charge and turns the LED light on when it is necessaryusing a portion of the stored energy in the rechargeable battery.

KEY FEATURES:MPPT charge technology (efficiency 97%)Optimized 3-step process of the battery charge(bulk charge, absorption change, float charge)Automatic detection of the nominal system voltage(12V/24V)Supports three types of batteries (GEL, AGM, Flooded)Remote management and configuration via GPRS / SMSIntegrated LED driverControl and monitoring of current supplied to the lampSchedule of events for light controlElectronic protection against over-load current

SPECIFICATIONSBattery rated voltage 12/24VMax open circuit voltage 100VMax charge current 12AMax power 180W (12V) / 360W (24V)Max load current 5AOwn consumption 20mA

COMPONENTS:Solar panelLED lampPower controllerBattery

QULON Helios helps to monitor and control the activityof stand-alone solar powered lighting units in real time.Amongst other functions, it provides additional safety forpedestrian crossings, bus stops and traffic lights systemsby ensuring their correct functioning at all times.

REMOTE LIGHTING MANAGEMENTFOR SOLAR POWERED INSTALLATIONS

20Sundrax Electronics

ON 8:30 PM - 7:30 AM

100%: 8 PM - 12:30 AM70%: 12:30 AM

-2 AM30%: 2 AM-5 AM100%: 5:00 AM - 8:30 AM

PM

AM

replacementsuggested

R 175G 238B 238

ON: 8:30 PM - 2 AMOFF: 2 AM - 5 AMON: 5 AM - 7 AM

100%: 8 PM - 12:30 AM

70%: 12:30 AM - 2 AM

30%: 2 AM - 5 AM

100%: 5:00 AM - 8:30 AM

…AND EVEN SMARTER!Supplement modules and sensors Committed to maintaining the widest possible variety of street light managementsolutions, Sundrax offers several additional modules and sensors that have alreadybeen integrated into our software. Easy access to weather sensors, road surfacemonitoring, multilane traffic sensors and other useful add-ons make our street lightingmanagement system even smarter and more powerful.

Road temperature sensorProvides the information about road surfacetemperature that is used by road managementand maintenance companies who monitor thequality of the road. Easy pole-mounting installation.Remote control and monitoring. Very compactand almost invisible.

Motion sensorThe QULON System can be equippedwith any third party motion sensorfor specific local adaptation and to fitany existing system and its requirements.Outdoor lighting is increased to fullbrightness in specific places wherepedestrians or vehicles are detectedby the motion sensors. This flexibilitygives an opportunity to choose the mostsuitable and convenient model on the marketfor the best results.

Traffic intensity sensorUseful for obtaining traffic statistics on multi-laneroads and highways up to six lanes.Grades vehicles by their length.Works at long distances: up to 37 m.Mounted to the pole. Essential for thosewho desire to have accurate traffic information.

Visual moduleHi-res camera that sends snapshotsvia 3G/GPRS network straight to theoperator’s software, 1.3 or 5 megapixel.Integrated luminance meter for smooth lightingintensity correction. Night view available.Integrated into lighting management system.Smart way to control the state of the road surfaceand lighting fixtures remotely.

Weather sensorProvides information about air temperature(-30° to +60°C range) and relative humiditythat may also be useful for other telemanagementsystems. Easy pole-mounting installation.Remote control and monitoring. Compactand accurate as a Swiss watch.

THIS IS HOW WE WORK HEREGeneral Business Principles appliedby Sundrax Electronics in dozens of citiesaround the world

Project-oriented solutionsHere at Sundrax we aim to work together with you, our valued client, to enhance your road and street lighting infrastructure. We canprovide project-oriented solutions designed for specific projectrequirements and backed up with know-how and proactive support.We develop our advanced lighting solutions and technology aroundthe needs of the people who ultimately experience them.

By adhering to such simple principles of everyday work, wesucceeded to customize our Qulon System for intelligentlight management of Murmansk City Airport, one of thenorthernmost civil airports in the world being challengedby polar nights and extremely low temperatures.

1

2

4

Constant developmentWe all have natural curiosity, this is what keeps us constantlystriving for better, investigating new solutions, posing questionsand coming up with new methods and technologies. We neverstop delving in, that is how we achieve the greatest resultsin building sustainable future every day: Because we dare.

Highest qualityEveryone, from executives and employees, at Sundrax Electronicsis making continuous efforts to achieve the very best qualityfor the products and services we offer. We relentlessly improveand tighten our methodologies to increase productivity, quality,cost-effectiveness and customer satisfaction at all stages, startingfrom research and development through production to shipment,installation and technical support.

Sustainability“Sustainable future” are not just buzzwords for us. Everythingwe do here at Sundrax Electronics is about promotingand building sustainable cities. Our products are developedand designed with concern for the environment and to enhancethe sustainability agenda. We ourselves aim to follow and adhereto a good and sustainable practice not only to help our clients,but also to act responsibly on behalf of future generations.

3