robustrobust performer performer - salvex · new delhi +91-11-2983 9188 mumbai +91-22-4005...

All specifications reflect average values based on typical machine layouts. Actual figures will vary depending on final machine configuration. Performance specifications are based on theoretical data. Photograph may show attachments or accessories,which may not be part of the standard scope of supply. Due to continual improvements, specifications & some components are subject to change without notice.

09

/20

09

marg

Cat

#O

W04

FERROMATIK MILACRON INDIA LTD.(Formerly known as Cincinnati Milacron Ltd.)

92, Phase-I, Phone : +91-79-2589 0081, 2589 0133, 2583 0063

G.I.D.C. Vatva, Fax : +91-79-2583 0125

Ahmedabad - 382 445, E-mail : [email protected]

India. Website : www.milacronindia.com

NEW DELHI +91-11-2983 9188 MUMBAI +91-22-4005 5459/60/61/62/66 CHENNAI +91-44-2361 3639/3319 KOLKATA +91-98300 33633

HYDERABAD +91-40-2340 2159/60 BANGALORE +91-80-2340 8984/85 CHANDIGARH +91-172-3917 428 PUNE +91-20-2614 0200

DAMAN +91-260-246 5150 COIMBATORE +91-94449 04912 KERALA +91-94477 21221

Hydraulic Injection Moulding Machines

CONTROLS

• 22 Parameter Monitoring for last 150 cycles with Graphics• 10.4" TFT Color Display with Alpha - Numeric Keypad• Actual Injection Speed & Pressure Graph Display• 80 Mould Data Storage• Configurable Multilevel Password with Operator's Name• Graphically Presentation of Hourly Production• Customized Setup Menu• High / Low Limit Display for Each Adjustable Parameter• I / 0 diagnosis - Analog & Digital• Timer Precision in 0.01 Second• Change Log Menu: logs last 100 Set Points Changes with Time & Date• Statistical Process Control (SPC) with Graphics• Process Mode: Functions with its Co-fuctions on a Single Key Press• Note Pad & Maintenance Scheduling• Freely Programmable Smart Outputs• Over View Screen with Graphical Display of Machine Functions• Soft Keys for Fast Access of Select Menus• Auto shut down• Visual & Audible Alarm• 1000 Alarm History with Date & Time Log• Printer Interface with USB Port

HYDRAULICS

• Multiple Pump with PQ circuit• Pump & Motor slide out from Base for Ease of Maintenance• Ergonomic Hydraulic Layout for Easy Approach• Valves Placed near Actuators for Rapid Response• Pre-Heating Circuit for Hydraulic Oil• Low Oil Level Audible Alarm & Motor Shut Down• Continuous Oil Filtration with 10 Micron Filter• Audible Alarm for Filter Clogging

AVAILABLE OPTIONS

• Air Ejection• Hydraulic Core pull• Feed Throat Temperature Control• PID Oil Temperature Control• Part Drop Detect for Single Cavity• Water Battery with Temperature Indicator• Water Manifolds• Robot Interface (SPI / EUROMAP)• Extra Heating Zones• Nozzle Contact Force by Pressure Switch• Ejector on Fly• Jam Bar• T-slot Platens• Extended Daylight with Ram Spacer• Eject Retract Limit Switch Verification• Insulated Heater Band• Bimetallic Barrel & Hardened / Coated Screw• AC Variable Frequency Drive• Special Paint

CLAMP

• Hollow Headless Ram with Mono Seal & No Piston Rings• Large Prefill Designed for Fast Tonnage Build-up• Rapid Traverse Cylinders• Conical Strain Rod Nuts & Controlled Stress on Tie Rods• Adjustable moving Platen Skates• Rigid Cast Platens with FEA• Adjustable Pressure setting of Closing & Opening Stage• Proportional Speed Control with 5 Closing & 5 Opening Speed• Adjustable 2 Stage Mould Safety Pressure & 1 Stage Speed• Position Based Ramping for Accurate Position Switching -

Precise Speed & Pressure Control• Linear Position Transducer for Accurate Clamp Position Control• Sensitive Mould Protection with Try Again Circuit• Stage Wise Actual Time Display• Insert Moulding Program

EJECTOR

• Knock-Out Bar• 2 Stage Programmable Ejector Forward Profile with Soft Eject• Ejector Speed & Pressure adustable on Screen• Linear Transducer for Ejector Position• Pulsating Ejector Strokes upto 9 Pulses• Intermediate Retract Set Point• Ejector Stay Forward & Forward Dwell Timer

INJECTION

• 6 Stage Injection Velocity & 15 Stage Injection Pressure Profile• 5 Stage Screw Speed & 5 Stage Back Pressure Control (Setting)

through Screen• Digital setting of Extruder RPM & Digital Read out of Actual RPM• Wide Choice of Injection Units with A-B-C Screw/Barrel Combinations• Easy Injection Unit Swivelling• Switch Over from Fill to Pack based on Position or Time• Linear Position Transducer for Accurate Injection Position Control• Injection Decompression Before / After Refilling or Both• Semi-Auto Purge, Cold Slug removal & Intrusion Moulding Programs• Aluminum Chequered Plate below Purge Area• Sprue Break with Timer• Injection start, Suck-back & Melt Decompresion - Delay Timer• Graphically Adjustable Alarm Bands for Injection Pressure• Sliding Hopper

TEMPERATURE CONTROL

• Actual Current Display of Heating Zones• Heater Failure & Thermocouple Failure Detection• Accurate PID Temperature Control settable on Screen• Feed Throat Temperature Indication• Auto Heat Startup & Shutdown• Heat Standby after set number of Cycles• Soak Timer for Cold Star t Protection• High / Low Temperature Alarm• Set & Actual Temperature Data with Bar Graph

The ROBUST PerformerThe ROBUST Performer

Generous SpecificationsHigh Productivity


80 to 910 Ton

Robust & ReliableUser Friendly Control

Design Advantages & Features Technology for Productivity

Energy Saving

Upto 40%

02 03

Endura-II - Advanced User Friendly Control• Ergonomic Layout• High Speed Microprocessor• Direct Access Menu Keys• Graphical Presentation of Machine Features• Self Diagnostic & Fault Finding Capability• Parameter Entry in Absolute Value• Central Monitoring System• Stastical Process Control (SPC)

Large Ram Diameter• Provides Uniform Force

Distribution across Platen• Provides Excellent Mould

Squareness & Parallelism• Reduces Mould Wear

62

Closed Loop PID Temperature Control• Provides Precise Temperature Control• Excellent Process Control & Stability

5

Generous Mould Space• Accommodates Large Moulds

Wide Skates for Platen Supports• Reduced Platen Deflection• Enhanced Life of Tie-bars• Higher Mould Carrying Capacity

Twin Cylinder Injection Unit• Uniform Load Distribution across

Screw Centerline

3

2

4

6

7

4

3 5

7

The Robust PerformerHydraulic Injection Moulding Machines

Unique Prefill

Cylinder Design• Fast Tonnage Built-up Time

1

1

AC Drive

(Optional)

Additional Control Features...

• Parameter Entry in Absolute Values

• User Customized Menu

• On Board I/O Diagnosis

• Mould Data Storage - 80 Nos.

Hollow Headless Ram• Minimized Friction – Faster Clamp Movement

Mono Seal & No Piston Rings• Long Life of Sealing System• Ease of Maintenance

Hydraulic Valves Mounted Close to Actuators• Fast Response From Actuator to Control Unit

More Use of Hoses• Quieter Machine Operation

Fully Guided Knock Out Bar• Provides Multi Point Ejection & Even Ejection Force

The OMEGA Series is Fully Hydraulic Direct Locking Ram Type Machine.


04

AC Variable Frequency Drive - One of the Best Energy Saving Concept

(Upto 100 HP - Optional Feature)

■ Principle

AC Variable Frequency Drive adjusts the Electric Motor Velocity to match the Power requirement of the Moulding

Cycle by Optimizing the Oil Volume from the Pump during various Moulding Phase.

■ Benefits

• Large Energy Saving when Machine Cycle with High Idling Time

Other Advantages

• AC Variable Frequency Drive offers a 'Soft Start' Capability of Motor

• Reduced Wear & Tear on the Hydraulic Component & Motor related Components

• Prevents Excess Flow of Oil resulting in

– Lower Oil Temperature

– Reduced Oil Cooling Requirement

– Enhanced Oil Life

• Reduced Motor Noise

05

Cartridge Valves• Smooth Operations• Low Energy Dissipation

Finite Element Analysis (FEA) for Machine Components• Provides Maximum Strength to Weight Ratio

■ Typical Applications Suitable for AC Variable Friquency Drive

• Automotive • House Ware • Construction

• White Goods • Rigid Packaging • Furniture

Technical Specifications

ALL DIMENSIONS ARE IN MM OMEGA 100 W

A M16x40 DEEP (106 HOLES ON MOVING PLATEN)M16x40 DEEP (108 HOLES ON STATIONARY PLATEN)

B MOVING PLATEN : Ø 50.0 THRU BORE K/O BAR CENTER HOLE M16 THRUSTATIONARY PLATEN : Ø 101.6 (±0.05) WITH LOCATING RING,Ø 125.0 (+0.040/0.00) WITHOUT LOCATING RING

C Ø 27.0 THRU, (4) HOLES & K/O BAR HOLES M12 THRU (4) NOS

OMEGA 80 W


B MOVING PLATEN : Ø 50.0 THRU BORE K/O BAR CENTER HOLE M16 THRUSTATIONARY PLATEN : Ø 101.6 (±0.05) WITH LOCATING RING,Ø 125.0 (+0.040/0.00) WITHOUT LOCATING RING

C Ø 27.0 THRU, (4) HOLES & K/O BAR HOLES M12 THRU (4) NOS07

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT

INJECTION CAPACITY MAX. (GPPS) gm

THEORETICAL DISPLACEMENT cc

INJECTION PRESSURE bar

INJECTION RATE cc/sec

INJECTION SCREW STROKE mm

SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm

SCREW TORQUE @ 172 BAR Nm

PLASTICIZING RATE (GPPS) gm/sec

PLASTICIZING RATE (BARRIER SCREW) gm/sec

NO. OF PYROMETER (BARREL+NOZZLE)

TOTAL HEAT CAPACITY kW

CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm

MINIMUM MOULD HEIGHT mm

PLATEN SIZE (H x V) mm

DISTANCE BETWEEN TIE ROD mm

TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL

ELECTRIC MOTOR kW (HP)

OIL TANK CAPACITY ltr

WATER REQUIREMENT (Inlet temp. 29°C) lpm

CONNECTED LOAD kW

MACHINE DIMENSION (L x W x H) m

MACHINE WEIGHT kg

OMEGA 80 W

800 - 140 800 - 215

20 HP 20 HP

28 MM FRAME 32 MM FRAME

A B C A B C

64 84 106 99 125 171

67 88 112 104 132 180

2068 1584 1251 2074 1639 1204

107 140 177 105 133 180

110 110 110 130 130 130

28 32 36 32 36 42

23 20 17.7 22.6 20 17

400 399 399 399 295 295

268 537 537 537 671 671

11 14 19 14 14 21

– – – – – –

3+1 3+1

6.4 7.3

80 80

500 500

700 700

200 200

610 x 570 610 x 570

410 x 370 410 x 370

70 70

100 100

3.0 3.0

15 (20) 15 (20)

280 280

80 80

21.4 22.3

4.21 x 1.33 x 1.98 4.29 x 1.33 x 1.98

3600 3800

Technical Specifications


OMEGA 100 W

1000 - 215 1000 - 430

25 HP 25 HP


A B C A B C

99 125 171 215 272 336

104 132 180 226 286 353

2074 1639 1204 1902 1503 1217

115 146 199 135 171 211

130 130 130 180 180 180

32 36 42 40 45 50

22.6 20 17 22.5 20 18

400 295 295 295 251 205

537 671 671 671 875 1074

14 14 21 19 22 24

– – – 23 27 29

3+1 3+1

7.3 13.2

100 100

560 560

760 760

200 200

610 x 610 610 x 610

410 x 410 410 x 410

70 70

100 100

4.5 4.5

18.5 (25) 18.5 (25)

315 315

80 80

25.8 31.7

4.73 x 1.36 x 2.04 4.83 x 1.36 x 2.04

4200 4500

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 150 W

1500 - 430 1500 - 605

30 HP 30 HP


A B C A B C

215 272 336 303 374 452

226 286 353 318 392 475

1902 1503 1217 1901 1540 1273

191 242 298 186 230 278

180 180 180 200 200 200

40 45 50 45 50 55

22.5 20 18 22.2 20 18.2

295 353 288 288 288 288

671 875 1074 1074 1074 1074

19 31 34 25 34 44

23 38 41 31 41 51

3+1 3+1

13.2 15

150 150

625 625

825 825

200 200

715 x 715 715 x 715

510 x 510 510 x 510

85 85

100 100

4.5 4.5

22 (30) 22 (30)

405 405

80 80

35.2 37

5.24 x 1.54 x 2.25 5.32 x 1.54 x 2.25

6800 7300

OMEGA 200 W

2000 - 605 2000 - 935

40 HP 40 HP


A B C A B C

303 374 452 467 565 789

318 392 475 491 594 829

1901 1540 1273 1901 1571 1125

233 288 348 241 292 407

200 200 200 250 250 250

45 50 55 50 55 65

22.2 20 18.2 22 20 16.9

360 360 340 288 288 206

1074 1074 1074 1342 1342 1879

31 43 52 34 44 50

38 51 61 41 51 58

3+1 3+1

15 19.6

200 200

750 750

950 950

200 200

820 x 820 820 x 820

560 x 560 560 x 560

95 95

100 100

7.5 7.5

30 (40) 30 (40)

425 425

80 80

45 49.6

5.89 x 1.62 x 2.37 6.01 x 1.62 x 2.37

9800 10500

OMEGA 150 WA M16x40 DEEP (156 HOLES ON MOVING PLATEN)

M16x40 DEEP (164 HOLES ON STATIONARY PLATEN)B MOVING PLATEN : Ø 100.0 THRU BORE K/O BAR CENTER HOLE M16 THRU

STATIONARY PLATEN : Ø 160.0 (+0.04) WITH LOCATING RING,Ø 175.0 (+0.04/0.00) WITHOUT LOCATING RING

C Ø 27.0 THRU, (12) HOLES & K/O BAR HOLES M16x40 DEEP (12) NOS



STATIONARY PLATEN : Ø 160.0 (+0.04/0.00) WITH LOCATING RING,Ø 175.0 (+0.04/0.00) WITHOUT LOCATING RING

C Ø 27.0 THRU, (12) HOLES & K/O BAR HOLES M16x40 DEEP (12) NOS06

ALL DIMENSIONS ARE IN MM




C Ø 27.0 THRU, (12) HOLES & K/O BAR HOLES M16x40 DEEP (12) NOS

* With Ram Spacer

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 450 W

4500 - 2350 4500 - 3335

75 HP 75 HP


A B C A B C

1172 1531 1937 1722 2179 2690

1231 1607 2036 1810 2290 2827

1910 1463 1156 1843 1456 1180

452 591 748 481 609 752

320 320 320 360 360 360

70 80 90 80 90 100

22.9 20 17.8 22.5 20 18

218 218 170 152 152 136

3356 3356 4295 4832 4832 5369

61 84 88 59 78 91

76 102 107 71 95 109

3+1 4+1

29.5 42.8

450 450

1100 1100

1500 1500

400 400

1200 x 1200 1200 x 1200

830 x 830 830 x 830

140 140

200 200

11.5 11.5

55 (75) 55 (75)

1160 1160

150 150

84.5 97.8

8.26 x 2.28 x 2.80 8.81 x 2.28 x 2.80

22300 23000

Technical SpecificationsTechnical Specifications


OMEGA 350 W


B MOVING PLATEN : Ø 100.0 THRU BORE K/O BAR CENTER HOLE M16 THRUSTATIONARY PLATEN : Ø 160.0 (+0.04/0.00) WITH LOCATING RING,Ø 175.0 (+0.04/0.00) WITHOUT LOCATING RING

C Ø 27.0 THRU, (12) HOLES & K/O BAR HOLES M16x40 DEEP (20) NOSD Ø 52.40 THRU, (8) HOLES

OMEGA 450 WA M20x50 DEEP (168 HOLES ON BOTH PLATENS)B MOVING PLATEN : Ø 125.0 THRU BORE K/O BAR CENTER HOLE M24 THRU

STATIONARY PLATEN : Ø 175.0 (+0.040/–0.00) WITH LOCATING RING,Ø 200.0 (+0.046/–0.00) WITHOUT LOCATING RING


08 09

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 250 W

2500 - 935 2500 - 1185

50 HP 50 HP


A B C A B C

467 565 789 588 821 952

491 594 829 617 862 1000

1901 1571 1125 1919 1374 1185

269 325 454 252 353 409

250 250 250 260 260 260

50 55 65 55 65 70

22 20 16.9 23.6 20 18.6

320 320 229 229 229 200

1342 1342 1879 1879 1879 2148

38 49 55 35 55 56

45 57 65 41 65 69

3+1 3+1

19.6 23.7

250 250

830 830

1080 1080

250 250

880 x 880 880 x 880

620 x 620 620 x 620

100 100

100 100

7.5 7.5

37 (50) 37 (50)

655 655

130 130

56.6 60.7

6.30 x 1.73 x 2.50 6.54 x 1.73 x 2.50

13000 13500

OMEGA 350 W

3500 - 1185 3500 - 2350

60 HP 60 HP


A B C A B C

588 821 952 1172 1531 1937

617 862 1000 1231 1607 2036

1919 1374 1185 1910 1463 1156

334 466 540 350 458 579

260 260 260 320 320 320

55 65 70 70 80 90

23.6 20 18.6 22.9 20 17.8

302 290 264 169 169 132b

1879 1879 2148 3356 3356 4295

47 70 74 48 65 68

54 82 92 59 79 83

3+1 3+1

23.7 29.5

350 350

960 960

1260 / 1500* 1260 / 1500*

300 / 540* 300 / 540*

1010 x 1010 1010 x 1010

710 x 710 710 x 710

125 125

125 125

7.5 7.5

45 (60) 45 (60)

885 885

130 130

68.7 74.5

7.45 x 1.93 x 2.71 7.80 x 1.93 x 2.71

15750 16250

ALL DIMENSIONS ARE IN MM ALL DIMENSIONS ARE IN MM

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 550 W

5500 - 3335 5500 - 4850 5500 - 3335 5500 - 4850

75 HP 75 HP 100 HP 100 HP

80 MM FRAME 90 MM FRAME 80 MM FRAME 90 MM FRAME

A B C A B C A B C A B C

1722 2180 2691 2421 2990 3618 1722 2180 2691 2421 2990 3618

1810 2291 2828 2545 3142 3802 1810 2291 2828 2545 3142 3802

1843 1456 1180 1906 1544 1276 1843 1456 1180 1906 1544 1276

477 605 746 448 554 670 659 834 1029 618 764 924

360 360 360 400 400 400 360 360 360 400 400 400

80 90 100 90 100 110 80 90 100 90 100 110

22.5 20 18 22.2 20 18.2 22.5 20 18 22.2 20 18.2

152 152 136 110 110 110 206 206 185 150 150 150

4832 4832 5369 6631 6631 6631 4832 4832 5369 6631 6631 6631

59 78 91 57 74 93 80 106 124 77 100 127

71 95 109 69 88 111 97 129 148 94 119 152

4+1 4+1 4+1 4+1

42.8 54 42.8 54

550 550 550 550

1140 1140 1140 1140

1676 1676 1676 1676

536 536 536 536

1245 x 1245 1245 x 1245 1245 x 1245 1245 x 1245

870 x 870 870 x 870 870 x 870 870 x 870

160 160 160 160

200 200 200 200

12 12 12 12

55 (75) 55 (75) 75 (100) 75 (100)

1375 1375 1375 1375

150 150 150 150

97.8 109 117.8 129

9.20 x 2.48 x 2.8 9.60 x 2.48 x 2.80 9.20 x 2.48 x 2.8 9.60 x 2.48 x 2.80

32300 33000 32300 33000


OMEGA 550 WA M20x50 DEEP (168 HOLES ON BOTH PLATENS)B MOVING PLATEN : Ø 160.0 THRU BORE & Ø 200x15 DEEP C’BORE K/O BAR CENTER HOLE M24 THRU




MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 660 W

6600 - 4850 6600 - 6440 6600 - 10065

100 HP 100 HP 100 HP

90 MM FRAME 100 MM FRAME 110 MM FRAME

A B C A B C A B

2421 2990 3618 3289 3979 5139 5063 6538

2545 3142 3802 3457 4183 5401 5322 6872

1906 1544 1276 1864 1540 1193 1891 1465

618 764 924 668 808 1044 567 732

400 400 400 440 440 440 560 560

90 100 110 100 110 125 110 125

22.2 20 18.2 22 20 20 22.7 20

150 150 150 120 120 120 120 120

6631 6631 6631 8268 8268 8268 8268 8268

77 100 127 80 102 150 102 150

94 119 152 96 122 162 122 162

4+1 4+1 4+1 4+1

54 59.3 61.9 62

660 660 660

1320i 1320 1320

1780 1780 1780

460 460 460

1400 x 1400 1400 x 1400 1400 x 1400

950 x 950 950 x 950 950 x 950

170 170 170

200 200 200

12 12 12

75 (100) 75 (100) 75 (100)

1995 1995 1995

150 150 150

129 134.3 136.9 137

10.1 x 2.56 x 2.92 10.57 x 2.56 x 2.92 10.87 x 2.56 x 2.92 11.10 x 2.56 x 2.92

35300 36000 37000



STATIONARY PLATEN : Ø 200.0 (+0.072/0.00) WITH LOCATING RING, Ø 315.0 (+0.052/0.00) WITHOUT LOCATING RINGC Ø 27.0 THRU, (8) HOLES & K/O BAR HOLES M16x40 DEEP (28) NOSD Ø 52.4 THRU, (16) HOLES

10 11







12 13

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 660 W

6600 - 4850 6600 - 6440 6600 - 10065

150 HP 150 HP 150 HP


A B C A B C A B

2421 2990 3618 3289 3979 5139 5063 6538

2545 3142 3802 3457 4183 5401 5322 6872

1906 1544 1276 1864 1540 1193 1891 1465

874 1079 1306 944 1142 1475 801 1034

400 400 400 440 440 440 560 560

90 100 110 100 110 125 110 125

22.2 20 18.2 22 20 20 22.7 20

212 212 212 170 170 170 170 170

6631 6631 6631 8268 8268 8268 8268 8268

110 142 180 114 144 212 144 212

133 169 215 136 172 229 172 229

4+1 4+1 4+1 4+1

54 59.3 61.9 62

660 660 660

1320 1320 1320

1780 1780 1780

460 460 460

1400 x 1400 1400 x 1400 1400 x 1400

950 x 950 950 x 950 950 x 950

170 170 170

200 200 200

12 12 12

112 (150) 112 (150) 112 (150)

1995 1995 1995

200 200 200

166 171.3 173.9 174

10.1 x 2.56 x 2.92 10.57 x 2.56 x 2.92 10.87 x 2.56 x 2.92 11.10 x 2.56 x 2.92

35300 36000 37000

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 775 W

7750 - 4850 7750 - 6440 7750 - 10065

100 HP 100 HP 100 HP


A B C A B C A B

2421 2990 3618 3289 3979 5139 5063 6538

2545 3142 3802 3457 4183 5401 5322 6872

1906 1544 1276 1864 1540 1193 1891 1465

618 764 924 668 808 1044 567 732

400 400 400 440 440 440 560 560

90 100 110 100 110 125 110 125

22.2 20 18.2 22 20 20 22.7 20

150 150 150 120 120 120 120 120

6631 6631 6631 8268 8268 8268 8268 8268

77 100 127 80 102 150 102 150

94 119 152 96 122 162 122 162

4+1 4+1 4+1 4+1

54 59.3 61.9 62

775 775 775

1320 1320 1320

1920 1920 1920

600 600 600

1680 x 1475 1680 x 1475 1680 x 1475

1150 x 950 1150 x 950 1150 x 950

190 190 190

200 200 200

18.3 18.3 18.3

75 (100) 75 (100) 75 (100)

1995 1995 1995

150 150 150

129 134.3 136.9 137

10.3 x 2.93 x 2.92 10.74 x 2.93 x 2.92 11.05 x 2.93 x 2.92 11.4 x 2.93 x 2.92

38300 39000 40000







MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 910 W

9100 - 6440 9100 - 10065

150 HP 150 HP


A B C A B

3289 3979 5139 5063 6538

3457 4183 5401 5322 6872

1864 1540 1193 1891 1465

944 1142 1475 801 1034

440 440 440 560 560

100 110 125 110 125

22 20 20 22.7 20

170 170 170 170 170

8268 8268 8268 8268 8268

114 144 212 144 212

136 172 229 172 229

4+1 4+1 4+1

59.3 61.9 62

910 910

1600 1600

2350 2350

750 750

2000 x 1600 2000 x 1600

1530 x 1120 1530 x 1120

190 190

210 210

18.3 18.3

112 (150) 112 (150)

2900 2900

200 200

171.3 173.9 174

12.2 x 3.36 x 2.89 12.5 x 3.36 x 2.89 12.7 x 3.36 x 2.89

60000 61000


M24x60 DEEP (180 HOLES ON STATIONARY PLATEN)B MOVING PLATEN : Ø 250.0 THRU BORE K/O BAR CENTER HOLE M20x50 MM DEEP


C Ø 52.4 THRU, (28) HOLES & K/O BAR HOLES M20x50 DEEP (28) NOS14 15

MODEL

INTERNATIONAL SIZE

POWER PACK

INJECTION UNIT UNIT






SCREW DIAMETER mm

SCREW L/D RATIO

SCREW SPEED rpm






CLAMP UNIT

CLAMP FORCE ton

CLAMP STROKE mm

MAXIMUM DAYLIGHT mm




TIE ROD DIAMETER mm

EJECTOR STROKE mm

EJECTOR FORCE ton

GENERAL




CONNECTED LOAD kW


MACHINE WEIGHT kg

OMEGA 775 W

7750 - 4850 7750 - 6440 7750 - 10065

150 HP 150 HP 150 HP


A B C A B C A B

2421 2990 3618 3289 3979 5139 5063 6538

2545 3142 3802 3457 4183 5401 5322 6872

1906 1544 1276 1864 1540 1193 1891 1465

874 1079 1306 944 1142 1475 801 1034

400 400 400 440 440 440 560 560

90 100 110 100 110 125 110 125

22.2 20 18.2 22 20 20 22.7 20

212 212 212 170 170 170 170 170

6631 6631 6631 8268 8268 8268 8268 8268

110 142 180 114 144 212 144 212

133 169 215 136 172 229 172 229

4+1 4+1 4+1 4+1

54 59.3 61.9 62

775 775 775

1320 1320 1320

1920 1920 1920

600 600 600

1680 x 1475 1680 x 1475 1680 x 1475

1150 x 950 1150 x 950 1150 x 950

190 190 190

200 200 200

18.3 18.3 18.3

112 (150) 112 (150) 112 (150)

1995 1995 1995

200 200 200

166 171.3 173.9 174

10.3 x 2.93 x 2.92 10.74 x 2.93 x 2.92 11.05 x 2.93 x 2.92 11.4 x 2.93 x 2.92

38300 39000 40000





robustrobust performer performer - salvex · new delhi +91-11-2983 9188 mumbai +91-22-4005...

Documents