qcomdloader manual 1127
DESCRIPTION
ManualTRANSCRIPT
QcomDloader :
Prepared by
Date2014-11-04
:
Reviewed by
Date2014-11-04
:
Approved by
Date2014-11-04
Revision record
Date
Revision Version
Section NumberChange Description
Author
2014-8-291.0.01Preliminary
2014-9-121.0.2Update procedure
2014-11-271.0.2Add New download method 2
Catalogue1Purpose42Application scope43Tool list44Intall45Operation steps86Note12
1 PurposeThe QcomDloader tool is to guide the after-sale service personnel and related personal to download and upgrade phone software of Qualcomm platform2 Application scopeThe manual is suitable for mobile phone of Qualcomm platformaim to after-sale service personnel and related personal to download and upgrade mobile software3 Tool list
NumberBOM coding.namespecificationsquantity.
1PCCPU freq. :>700 MHzMemory:128MOS:Win98Win2KWinXP1pcs
2QcomDLoaderQcomDLoader.exe1pcs
3Mobile phoneQualcomm platform1pcs
4battery1pcs
5driverusb-driverSetupUSB driver1pcs
6cableUSB cable1pcs
4 Install4.1 Install Usb driver1. How to install usb-driverRun Setup, pop up following window
Click Next button
Choose I accept the terms in the license agreement, Click Next button
Click Install button
Click Finish button.2.check following windowif show Qualcom HS-USB QDLoader 9008 (comX)when phone is connected to pc with usb cableIt means that usb driver had been installed well
5 Operation steps5.1 Run QcomDLoader toolThis tool doesnt need to install it. Only need double-click QcomDLoader.exe to run it in tool folder, the UI is following:
There are five buttons in main UI, they are LoadSettingsStartStopAbout Click Load button in the upper leftChoose software that prepare to download or upgrade. Please see the following figure
5.2 Click Settings to configure QcomDLoaderClick Settings button, pop up the following UI
eMMC Programmer: prog_emmc_firehose_8916.mbnRaw Program: rawprogram_unparse.xmlPatch0: patch0.xmlThe files are been included in the software package. Please see belowif the names in setting UI are difference with the names in the software package, please stay the same with names in the software package
For example: rawprogram_unparse.xml in the software package
So Raw Program column must fill in for: rawprogram_unparse.xmlChipset:8916
ClickOKthen exit the setting UI 5.3 Click Start to DownloadMethod 1: Click Start button in main UIPlease firstly enter to factory mode(press volume upper and power buttons, please see the following figure of factory mode)then connect phone to PC with USB cable to download.
Method 2: Click Start button in main UIPlease firstly enter to 9008 download mode(Press the volume upper and volume down keys together), then connect phone to PC with USB cable to download.
1Download progress
2Download finish
3if unplugged USB cableIt shows as
4Click Stop buttonThe downloading status bar will disappearSee below:
6 Note
1. After finished download completely, can download again with the same port.stepAfter finished downloadunplug USB and connect USB 2. It supports multi-port download, now can support 8 ports