pico wi-fi manaual - revo · revo pico wi-fi interne t radio no wire less networks found < scan...

W I - F I I N T E R N E T R A D I O

w w w . r e v o . c o . u k

NorwayItalianoDeutschFrançaisEnglish

mode d’emploi Bedienungsanleitung Mode dÕemploi Bruksanvisning

Operating Guide

I N T E R N E T R A D I O A D A P T O R

MONDO Wi-Fi Manual.qxd 10/12/07 12:01

ContentsWelcome to Mondo Wi-Fi 3

Benefits of Internet Radio 3

Mondo Wi-Fi Overview 3

Warranty 3

Warranty Registration 3

Before Getting Started 3

Wi-Fi Internet Requirements 3

Connecting Mondo 3

Controls and Connections 4

Remote Control 4

Powering Mondo 4

Reciva Radio Portal 4

Connecting To Your Network 5

Choosing a Station 6

Station Updates 6

On-Demand Broadcasts 7

General Operation 7

Resetting Mondo 7

Alarm + Clock Functions 8

Setting Mondo’s Clock 8

Setting An Alarm 8

Configure Menu 9

Network Configuration 9

Version + Firmware Updates 9

Languages 9

Factory Reset 9

Register 9

Clock 9

Sleep Mode 9

Backlight 9

Wi-Fi Strength 9

Media Player Operation 10

Windows + Apple Mac Set-Up 10

Accessing Shared Music 10

General Media Player Operation 10

Windows PC UPnP Set-Up 11

Troubleshooting 12

Spare and Accessories 12

Copyright andAcknowledgements

Copyright © 2007 Revo Technologies Ltd.All rights reserved.

Revo Technologies LtdThe Inox BuildingCaldwellsideLanarkScotlandUnited KingdomML11 7SR

Tel. 01555 66 61 61Int. Tel. +44 1555 66 61 61Fax. 01555 66 33 44Int. Fax. +44 1555 66 33 44Email. [email protected]: www.revo.co.uk

The information in this guide is believed tobe correct at the time of publication.However, our policy is one of continuousdevelopment and so the information issubject to change without notice.

Revo, Mondo and M-Port are trademarks orregistered trademarks of Revo TechnologiesLimited.

iPod® is a registered trademark of AppleComputer, Inc.

Safety Warnings

Do not operate this radio near water.Avoid small objects and liquids from gettinginto this product.Do not remove screws or casing parts.Use only the power supply unit supplied.

EEC: This product has been designed andtype-tested to comply with EU requirementsand carries a CE mark.

Technical SupportShould you encounter any difficulties withthe operation of your Revo Mondo Wi-Fi, orshould you suspect that it may be faulty insome way, please call our technical supportdepartment on the number below:

01555 66 61 61

Alternatively, email [email protected] orvisit the troubleshooting section of ourwebsite at: www.revo.co.uk/support

Preface

2

English


3

Benefits of Internet RadioAccess to 7,000+ internet radio stations

Search by genre or country

Access ‘Listen Again’ services

Station list updates automatically

No subscription charges

Mondo Wi-Fi OverviewThe Mondo Wi-Fi Internet Radio Adaptor is capable of accessing thousands of internet radio stations from all over the world, givingthe user an unprecedented choice of radiocontent.

Mondo Wi-Fi connects to any sound systemthat has RCA inputs, be it a hi-fi system orboombox type product. It then links to anybroadband Wi-Fi connection to stream bothlive and “Listen Again" internet radiobroadcasts.

Mondo has the added benefit of providingfull electronic alarm clock functionality.

WarrantyRevo Technologies Ltd warrants to thepurchaser that this product will be freefrom parts and manufacturing defects inthe course of normal use for a period ofone year from the date of purchase.

This warranty does not apply in cases ofaccidental damage, where the case hasbeen removed, wear and tear, negligence,modification or inappropriate use.

Should you encounter problems with thisproduct, please contact your supplier oralternatively see page 2 of this guide fortechnical support contact details.

Warranty RegistrationIt is a warranty condition that you registeryour purchase by either completing thewarranty card enclosed with your radio oralternatively registering online atwww.revo.co.uk/register

Wi-Fi Internet Requirements In order to use your Mondo Wi-Fi internetradio adaptor you will require a wireless(Wi-Fi) broadband Internet connection.

If your wireless network is configured to useWired Equivalent Privacy (WEP) or Wi-FiProtected Access (WPA) data encryption,you need to know the WEP or WPA code(Web Key) in order allow Mondo Wi-Fi to

communicate with the network.Mondo Wi-Fi should be able to operateanywhere within 35 metres of the wirelessbase station – depending on the operatingenvironment and the specification of yourwireless base station.

Please ensure that your wireless network ispowered-up and connected to yourbroadband Internet connection.

Thank you for buying our Mondo Wi-Fi internet radio, we feel sure that it willprovide you with years of enjoyment and reliable service.

This guide has been designed to quickly get you up-and-running and listeningto internet radio, offer guidance on the more complex features of thisproduct and provide information on safety, warranty and registration.

Welcome to Mondo Wi-Fi

Before Getting Started

English

Connecting Mondo Mondo can be connected to any audiosystem that has stereo RCA connectors.

Using the connection leads supplied, simplyconnect to the corresponding red and blackRCA connectors on Mondo’s rear panel.


4

Controls and Connectors

Your Mondo Wi-Fi internet radio adaptor can be powered from the mains using the poweradaptor supplied.

To power from the mains, insert the power adaptor plug into the DC power socket on therear of Mondo Wi-Fi. Pressing the button will switch Mondo Wi-Fi on.

Only use the power adaptor supplied. Replacements can be purchased from our websitewww.revo.co.uk, or alternatively call us on 01555 66 61 61.

The station list used by Mondo Wi-Fi’ iscompiled and managed by Reciva Limited,they also provide the internet radiotechnology used in Mondo Wi-Fi.

Mondo Wi-Fi users are able to accessadditional internet radio services by visitingthe Reciva Radio Portal at - www.reciva.comand registering their radio.

Reciva Radio Portal

Powering Mondo Wi-Fi

English

1. Power2. Back3. Scroll Left4. Scroll Right5. Select

1. Wi-Fi Antenna2. Stereo RCA Line-Out3. DC Power Socket4. Headphone Socket

1.

2. 3.

2.1. 3. 4.

4. 5.

A

A

back select

1. Scroll Left2. Select3. Reply4. Back5. Presets6. Media Player7. Browse8. Volume Down9. Scroll Right10. Volume Up11. Alarm 0n/Off12. Standby

1.

3.4.

5. 6.

8.

10.

11.

12.

7.

9.2.

Media Player

Stop

Skip Back Skip Forward

Play / Pause

Remote Control


5

Press the ON/OFF button to power-upMondo Wi-Fi. Mondo’s LCD screen willdisplay a welcome message.

After a few seconds this message willchange to ‘Initialising Network’

You will then be given the option to scanfor available networks. Press the SELECTbutton to action this request.

NOTE: If you make a mistake at any point,press BACK to return to previous screen.

If Mondo can’t find a wireless network itwill display the following message.

If this happens please check that yourwireless router is switched on, refer tothe manufacturer if problem persists.

If Mondo does find your wireless network,it will display the network name, forexample:

In some cases Mondo Wi-Fi may findmore than one network. Use the < >buttons to see the names of each one –and press the SELECT button when thename of your own network is displayed.

If your network is not configured torequest a password (WEP/WPA), Mondowill connect to the network and display:

If a WEP/WPA key (password) isrequired, Mondo will display the following:

After a few seconds, Mondo will ask youto input the WEP/WPA code and willdisplay the password entry screen:

Use the < > buttons to cycle back andforward through the alpha-numericcharacter list. Press the SELECT buttonto select a character.

Please note, WEP/WPA pass codes arecase-sensitive.

If you make a mistake while entering yourpassword, press the BACK button todelete a character.

After selecting the final character of yourpassword, scroll to the word ‘END’ andpress the SELECT button to enter yourcode. Mondo Wi-Fi should nowsuccessfully connect to your network.

Mondo Wi-Fi will automatically rememberthe WEP/WPA code for your network,and other networks you have usedpreviously. You will not need to re-enterthese codes in the future.

Connecting To Your Network

Scanning... 10

•••••

6 Music

Now tuning...

Station not

available

87.50MHz

99.50MHz

12:03:26

12-08-2006

Setting clock...

Revo Uno

Digital Radio

Welcome to DAB

•••••

1Xtra

txt us...on 0203

Clock not set...

English

Revo Mondo

Wi-Fi

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found

< Scan for

network >

My Home Network

Network Ok

Enter WEP key

<END<> 0 1234>

<END<> 0 1234>

Using saved key

Connecting to

Network

Initialising

Network

Revo Pico Wi-Fi

Internet Radio

No Wireless

Networks Found


When Mondo Wi-Fi has connected to yourwireless network, you are now ready toselect a station.

Please Note: You can move back to theprevious screen at any time by pressingthe BACK button.

Mondo Wi-Fi has three main menuheadings Stations, Configure and MediaPlayer.To select a radio station, use the< > buttons until the word STATIONSappears, then press the SELECT button.

You now have the option of selecting astation by location (country) or by genre.Use the < > buttons to pick your searchmethod, then press SELECT.

Choosing location will give you analphabetical list of countries broadcastinginternet radio. Use the < > buttons toscroll through the country list. PressSELECT to select your desired location.For example:

You will then be given the choice of listingall station types in this country, or listingthem by genre eg. Pop, Dance... etc.

Use the < > keys and press SELECT tomake your selection, Mondo Wi-Fi will nowdownload the station list for your choice.

You can now scroll through the station listand make your selection by pressing theSELECT button.

Choosing Genre will give you analphabetical list of station types. Use the< > keys to view these.

Press the SELECT button to choose yourdesired genre.

You will now be given the choice of viewingall stations in this genre, or furthersorting them by location (country)

Now select your chosen station from thealphabetical list.

Station UpdatesOccasionally, Mondo Wi-Fi will tell you that itis receiving an updated station list. It doesthis automatically and periodically, ensuringthat Mondo Wi-Fi always has the lateststation directory on-board.

Choosing a Station

Scanning... 10

•••••

6 Music

Now tuning...

Station not

available

87.50MHz

99.50MHz

12:03:26

12-08-2006

Setting clock...

Revo Uno

Digital Radio

Welcome to DAB

•••••

1Xtra

txt us...on 0203

Clock not set...

6

OR

ORScanning... 10

•••••

6 Music

Now tuning...

Station not

available

87.50MHz FM

99.50MHz FM

94.50MHz

Preset 1

BBC 7

?????????

12:03:26

12-08-2006

Setting clock...

Revo Uno

Digital Radio

Welcome to DAB

•••••

1Xtra

txt us...on 0203

Clock not set...

English

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

<Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations <Albania >

16 Stations

Loading 323

Stations

Loading 323

Stations

<Cool FM >

96 kbps WMA

<Cool FM>

96 kbps WMA

Station Update

from Reciva

< Genre >

6537 Stations

< Dance >

323 Stations

< Dance >

323 Stations

<[All Station] >

323 Stations

<Genre >

6537 Stations

<Location >

6537 Stations

<Stations >

<[All Station] >

323 Stations

OR


General Operation

7

Changing VolumeTo change Mondo Wi-Fi’s volume, press theVOLUME UP and DOWN buttons onMondo’s remote control, the volume levelwill be displayed on Mondo’s LCD screen.Mondo Wi-Fi will remember its previousvolume level after shutdown and power-up.

Internet Radio PresetsMondo Wi-Fi can store five presets on itsremote control. To store the currentstation, press and hold one of the presetkeys for a period of two seconds. To selecta stored station, simply press thecorresponding preset key.

Returning To Main MenuYou may return to Mondo’s top-line main

menu at anytime by pressing the BACKbutton and working back through previousmenus.

LCD BacklightUnder standard factory settings, Mondo willdim its LCD backlight after approximately 30 seconds. Pressing any button on Mondoor the remote control will temporarily returnthe LCD brightness to full. To change thesefactory settings see the ‘Backlight’instructions on page 9 .

Requesting a StationIf you want to listen to a radio station thatis not listed in Mondo’s station list, you canvisit the Reciva website athttp://www.reciva.com/ and make arequest to add the station to the list.

OR

On-Demand BroadcastsSome radio stations provide a number ofadditional ways to listen to content; forexample being able to listen to radioshows that have already been broadcast,know as On-Demand or ‘Listen-Again’.

To choose between a ‘Live’ broadcast oran On-Demand one, simply use the < >buttons to select your option and pressSELECT to choose.

If you select On-Demand, you will bepresented with a list of shows that areavailable to ‘Listen Again’.

Use the < > buttons until your choice isdisplayed on the LCD, then press theSELECT button to confirm.

Some stations may allow you to fast-forward through an On-Demandbroadcast. Do so by pressing BROWSEon the remote control and using the < >buttons to forward and rewind throughthe broadcast. Press SELECT to playfrom your selected point.

Resetting Mondo Wi-FiIn the unlikely even that Mondo Wi-Fi should‘crash’, ‘freeze’ or stop responding to keypresses, it is possible to perform a resetand bring it ‘back to life’.

A ‘Factory Reset’ can be activated fromMondo’s ‘Configure’ menu. Performing a

factory reset will completely reset Mondo’smemory, clearing all WEP/WPA codes anduser settings. This will effectively returnMondo to its default factory settings.

English

< On Demand >

< Chart Show >

Start Time

<00:03:03 >

< Live (Real

Audio) >

< On Demand >

< Chart Show >

Start Time

<00:03:03 >

< Live (Real

Audio) >

< On Demand >

< Chart Show >

Start Time

<00:03:03 >

< Live (Real

Audio) >

< On Demand >

< Chart Show >

Start Time

<00:03:03 >

< Live (Real

Audio) >

OR


8

English

Setting An AlarmPress the button to switch on yourradio, then press the button on theMondo Wi-Fi remote control. Use the < >keys to change the hour, then pressSELECT to set. Mondo Wi-Fi will now askyou to set the minutes in the same way,press SELECT to set the alarm time.

Press the button to put Mondo intostandby mode. Mondo will now display thecurrent time on the top row of its display,with the alarm time shown in brackets onthe second line of the display.

Mondo Wi-Fi wake you up to an audibletone, to stop the alarm simly press anybutton on Mondo or its remote control.When the alarm has been deactivated,Mondo will switch to the radio station thatwas playing before Mondo went intostandby mode.

Alarm + Clock FunctionsSetting Mondo’s ClockTurn Mondo Wi-Fi on and from theConfigure menu locate the Clock option.Press SELECT and Mondo will give youtwo options; ‘Set Clock’ or ‘Set Alarm’. Choose ‘Set Clock’ and press SELECT,now use the < > keys to change the hour,then press SELECT to set. Mondo Wi-Fiwill now ask you to set the minutes in thesame way, press SELECT to set the time.

<Alarm1 >

<Set alarm >

<Set clock >

Set alarm

<On >

08:00

<Set time >

Set minutes

<08:05 >

Set minutes

<08:05 >

Buzzer

<Set mode >

Once

Set days >

Snooze 10 mins

< 10 >

Sleep time

< 15 mins >

BBC Radio 1

calls cost max

08:05:10

10-10-2007

08:05:10

10-10-2007

22:35

(07:10 )

Alarm Set:

07:10

Set Alarm

00:00

Set Clock

08:10

¯ Clock ˘

22:35

(07:10 )

Alarm Set:

07:10

Set Alarm

00:00

Set Clock

08:10

¯ Clock ˘

22:35

(07:10 )

Alarm Set:

07:10

Set Alarm

00:00

Set Clock

08:10

¯ Clock ˘

22:35

(07:10 )

Alarm Set:

07:10

Set Alarm

00:00

Set Clock

08:10

¯ Clock ˘

22:35

(07:10 )

Alarm Set:

07:10

Set Alarm

00:00

Set Clock

08:10

¯ Clock ˘


9

English

Network ConfigurationEnables you to scan again for connection toanother wireless network, or to manuallyconfigure the network parameters. You canalso choose to enable the ‘Low SignalWarning’ prompt when your wirelessnetwork signal is low.

VersionThis will display such information as yourdevice s serial number andhardware/software version numbers. This information may be requested whendealing with technical support issues.

Update FirmwareUse this to check whether there are anyfirmware updates available for your Mondo Wi-Fi radio adaptor. Mondo will check, andprompt you if there is. You can then makethe decision whether to start a firmwaredownload or not. A firmware update cantake several minutes, do not switch MondoWi-Fi off until this procedure has beencompleted. Doing so my cause permanentdamage.

LanguageThis allows you to change Mondo’s displaylanguage. Languages supported includeEnglish, French, German, Italian,Norwegian, Danish, Dutch, Portuguese,Spanish, Swedish and Finnish.

Factory ResetSee page 7 for details.

RegisterThis will display a key code that can be usedto register your radio on the Recivacustomer portal: http://www.reciva.com/

ClockSet Mondo Wi-Fi’s on-board clock via this

menu. It is also possible to access thealarm clock features of Mondo Wi-Fithrough this menu, as an alternative tousing the remote control.

Sleep ModeSelect Sleep Mode from the congiguremenua to programme Mondo to turn itselfoff after a pre-defined period of time. SleepMode operates in 15 minute incraments,from 15 minutes to 90 minutes. Simply usethe < > keys to define the sleep period andpress SELECT. Mondo Wi-Fi will nowautomatically put itself into standby modeafter the time has elapsed.

BacklightIt is possible to change the brightness ofMondo Wi-Fi’s LCD screen via the Configuremenu. There are three brightness settingsas follows:

Normal: This setting defines Mondo’snormal LCD brightness level. Use the < >keys to select the required brightness leveland press SELECT to set.

Auto-Bright: When switched on, pressingany button on Mondo or its remote controlwill activate ‘Auto-Bright’ mode for a periodof 30 seconds. The actual brightness levelfor ‘Auto-Bright’ is defined by this setting.

Standby: This sets the LCD brighness levelfor when Mondo Wi-Fi is in ‘Standby’ mode. Use the < > keys to select the requiredbrightness level and press SELECT to set.

Wi-Fi StrengthThis will display the strength of your Wi-Fisignal and will range between 0% - 100%.The further Mondo Wi-Fi is away from yourWi-Fi base-station, the weaker the signalstrength will be.

Configure Menu


10

English

Mondo Wi-Fi’s media player functionalityallows you to play audio files (AAC, AIFF, AU,MP3, RM, WAV and WMA) and playlists(M3U) stored on a networked PC or AppleMac. The media player functions have beentested and certified to operate withWindows 2000, Windows XP, WindowsVista and Mac OSX 10.2 or a later version.

Windows PC Set-UpEnsure that your PC is available on the

network, then using Windows Explorer,locate the folder where your audio files arestored...then

Right click on the folder.Select ‘Properties’Click on ‘Sharing’Select “Share this folder on the network’and ‘Allow network users to change myfiles’. Please note, do not try to make your‘My Documents’ or any of its sub-folders(e.g. ‘My Music’) shareable.

Apple Mac Set-Up

Setup Windows File Sharing on the MAC:From the ‘Dock’, click ‘System Preferences’.From the ‘System Preferences’ window(under the ‘Internet & Network’ section)click ‘Sharing’.

From the ‘Sharing’ window, do the following:

Under the ‘Services’ section, enable‘Personal File Sharing’ and ‘WindowsSharing’. Also, click ‘Start’ for each of theseservices.

Under the ‘Firewall’ section, keep firewall off.

Under the ‘Internet’ section, keep ‘InternetSharing’ off.

Setup an Account:

From the ‘System Preferences’ window,under the ‘System’ section, click ‘Accounts’.Select an account and remember its ‘ShortName’ and password. This information willbe used by Mondo Wi-Fi when connecting toyour Mac.

Directory Setup:

From the ‘Dock’, click ‘Finder’. From the‘Finder’ window, click ‘Applications >Utilities’. Holding Ctrl click on ‘DirectoryAccess’ then select ‘Get Info’ and ensurethat read / write enabled. Next double clickon ‘Directory Access’ and enable thefollowing:

AppleTalk LDAPv3SLP SMB/CIFS

Also, for the ‘SMB/CIFS’ item, click‘Configure’ and select an appropriateworkgroup.

Copy and paste the audio files to‘Documents’ in the ‘Finder’ window. Ensurethat your Mac is successfully connected tothe wireless network. Note, you may needto wait for few minutes for the changes totake effect.

You should now be able to access the audiofiles on your Mac by selecting ‘Media Player> Windows Shares’ on Mondo Wi-Fi, thenselecting your Mac from the list of devices.On selecting your Mac, if no shared foldersare found, press the SELECT button andselect user - at this point you can enter inthe ‘Short Name’ and password for yourMac account.

Accessing ‘Shared’ MusicWhen Mondo has connected to yourwireless network, press the BACK buttonuntil ‘Stations’ is displayed. Use the < >keys to find the ‘Media Player’ menu on-screen, then press the SELECT button.

Using the < > keys, find and select“Windows Shares’, then ‘Scan for PCs’. Mondo will now display ‘Finding PCs’. Whenthe scan is complete, use the < > keys tofind your PC and select, Mondo will nowsearch for shared folders. Using the < >keys to highlight the correct folder andpress SELECT.

Mondo will display ‘File Scan...’ as it scansthrough all the files on your Mac or PC.

PLEASE NOTE If you have a large numberof files, this operation could take severalminutes.

When Mondo has finished scanning, it willdisplay ‘By Album’. You can now browsethrough the scanned media files, which willbe organised ‘By Album’, ‘By Artist’, and‘Playlist’ - if available.

IMPORTANT The first time Mondo Wi-Ficompletes a file scan, a file called“reciva_media_cache” is written to the folderwhere the audio files are stored. This willspeed-up subsequent file scans.

Listening To A Single TrackScroll until ‘By Artist’ is on-screen thenpress SELECT. Now use the < > keys toscroll until your artist choice is displayed,then press SELECT. Now scroll until yourdesired album is displayed, and select it.The prompt ‘Add To Queue’ will appear atthis point. Scroll until your chosen trackname is on-screen and press SELECT. Yourchoice will now start to play.

Listening To A Complete AlbumUsing the < > keys, locate and select ‘By Artist’, then select your choice of artist.Now use the < > keys to scroll until youralbum choice is displayed, then pressSELECT. The prompt ‘Add To Queue’ willappear at this point, press SELECT andyour chosen album will start to play.

Queuing Tracks For PlaybackHighlight your chosen track then pressSELECT. ‘Track Added To Queue’ will nowbe displayed.

Queuing Albums For PlaybackHighlight your chosen album then pressSELECT. Scroll to ’Add To Queue’ thenSELECT. ‘Tracks Added To Queue’ will nowbe displayed.

Media Player Operation

✓✓ ✓

✓


11

Controlling PlaybackUse the STOP button on Mondo’s

remote control to stop playback.

Use the PLAY/PAUSE button to starta track, pause a track, or restart a pausedtrack.

Use SKIP TO PREVIOUS TRACK tostart playback of the previous track in thequeue.

Use the SKIP TO NEXT TRACK tostart playback of the next track in thequeue.

Browsing A QueuePress the BROWSE button - the currently

playing track name will be displayed. Usethe < > keys to see the tracks that arequeued for playback. To jump ahead andplay a track from the queue, use the < >keys and SELECT.

Removing Tracks From A QueuePress the BROWSE button - the currently

playing track name will be displayed.

Use the < > keys to scroll to the trackthat you would like to remove from thequeue. Press and hold the STOP key for 2seconds. Mondo will display ‘Delete Track?’.

Use the < > keys to to highlight either‘Yes’ or ‘No’. Press SELECT to make yourselection. ‘Removed From Queue’ will bedisplayed if you decided to delete a track.

To clear the entire contents of a queue,select ‘Clear Queue’ from the the mainMedia Player menu.

Playing Tracks RandomlySelect and add the individual tracks to the

queue as described previously.

Return to the main top-line Media Playermenu and select ‘Playback Mode’.

Use the < > keys to display ‘Shuffle’, thenselect SELECT.

Confirm that ‘Shuffle’ mode should beenabled, by selecting YES or NO.

Repeating Tracks In A QueueSelect the individual tracks as previously

described.

Return to the main top-line Media Playermenu and select ‘Playback Mode’.

Scroll to display ‘Repeat’, then pressSELECT button.

Confirm that ‘Repeat’ mode should beenabled, by selecting YES or NO.

Windows PC UPnP Set-UpIf your PC is running Microsoft Windows XPor Vista, then you can use Window MediaPlayer 11 (WMP 11) to act as your UPnP(Universal Plug and Play) media server 1.0.

WMP 11 can be downloaded fromMicrosoft’s website and installed by followingthe instructions detailed in its installationwizard.

Once installed, Windows Media Player 11will create a library from all the media filesavailable to it on your PC. To add new mediafiles to the library, select ‘File > Add toLibrary… > Advanced Options’, click ‘Add’and choose the files you wish to add andclick ‘OK’.

You will now need to connect Mondo Wi-Fito Windows Media Player 11 and configureit to allow the radio to access your medialibrary. In order to this, you will need to dothe following:

Keep pressing BACK to get to Mondo’stop-line menu and then scroll to ‘MediaPlayer’ and press SELECT.

Now use the < > keys to scroll to ‘UPNPServers’ and press SELECT. Mondo willscan for all available UPnP servers. Note, itmay take a few seconds for Mondo tocomplete its scan and before the scan hasbeen completed. Mondo will display‘[Empty]’. Mondo will continue to display‘[Empty]’ if no UPnP servers are found.

If “No PC Found” is displayed on Mondo’sdisplay, click the library tab in WindowsMedia Player and select media sharing, nowselect share my media and then click ‘OK’.

At this point you can scan for UPnPservers on Mondo Wi-Fi again, Mondo willnow be listed as a unknown device in themedia sharing window click the ‘Allow’button and then click ‘OK’. Mondo Wi-Fishould now be accessing your WindowsMedia Player Library.

PLEASE NOTE that only WMA files inWindows Media Player are accessible usingUPnP.

Playing Music Using UPnPWhen the UPnP server is configured to

share media files with Mondo Wi-Fi, you canbegin playing music as follows:

Press the BACK button until ‘Stations’ isdisplayed, then scroll to ‘Media Player’option, now press the SELECT button.

Use the < > keys to highlight ‘UPNPServers’ and press SELECT. Mondo willscan for all available UPnP servers. Pleasenote, it may take a few seconds for Mondoto complete its scan. Before the scan hasbeen completed, Mondo will display ‘[Empty]’and continue to do so if no UPnP serverscan be found.

After a successful scan, select your UPnPserver using the < > keys (if there is morethan one UPnP server), and then pressingthe SELECT button.

Mondo will now list the media categoriesavailable from the UPnP server, e.g. ‘Music’,‘Playlists’ etc. Use the < > keys to choosewhich category you wish to browse, thenpress SELECT. Use the < > keys tohighlight a sub category and press SELECT.Scroll to highlight the media files that youwish to play, then press SELECT. Mondowill display ‘[Add to Queue]’, press SELECTagain and Mondo will add the tracks to itsqueue and begin playing them automatically.added to the radio’s queue.

English


Browsing A QueuePress the BROWSE button - the currently

playing track name will be displayed. Usethe < > keys to scroll through the tracksthat are queued for playback. If you want tojump to a particular place in the queue,press the SELECT button when therequired track is displayed. It is important to

note here that media files scanned from theradio’s ‘Windows Shares’ function can alsobe added to the radio’s queue.

Full instructions on queue management,controlling music playback etc. under UPnPcan be found on page 11.

If you are experiencing any problems withyour Mondo Wi-Fi internet radio adaptor,please read the following ‘troubleshooting’guide. Alternatively can can visit the HELPsection of the Reciva website(www.reciva.com) the support section of theRevo website (www.revo.co.uk) or call ourtechnical support staff on 01555 66 61 61.

If you have trouble connecting Mondo Wi-Fito your wireless network, these steps mayhelp to resolve the problem:

1. Confirm that a Wi-Fi connected PC canaccess the Internet (i.e. can browse theweb) using the same network.

2. Check that a DHCP server is available, orthat you have configured a static IP addresson the radio. You can configure a static IPaddress on the radio using the menu item‘Configure -> Network Config -> Edit Config’,and then select ‘No’ for ‘Auto (DHCP)’.

3. Check that your network’s firewall is notblocking any outgoing ports. As aminimum, Mondo Wi-Fi needs access toUDP and TCP ports 80, 554, 1755, 5000and 7070.

4. Check your access point does notrestrict connections to particular MACaddresses. You can view the radio’s MACaddress using the menu item ‘Configure ->Network Config -> View Config -> MACaddress’.

5. If you have an encrypted network, checkthat you have entered the correct key orpass phrase into the radio. Remember thattext-format keys are case sensitive. If, whenattempting to connect to an encryptednetwork, your radio displays: ‘Wirelesserror’ followed by a 5-digit number, thenplease ensure that you enter the correctpass phrase for the network. If the problempersists, then you may need to consult yournetwork configuration.

If Mondo Wi-Fi can connect to the networksuccessfully, but is unable to play particularstations, it may be due to one of thefollowing causes:

1. The station is not broadcasting at thistime of the day (remember it may belocated in a different time zone).

2. The station has reached the maximumallowed number of simultaneous listeners.

3. The station is not broadcasting anymore.

4. The link on the radio is out of date.

5. The Internet connection between theserver (often located in a different country)and you is slow. Try using a PC to play backthe stream via the broadcaster’s web site. If you can play back the station with a PC,but not via Mondo Wi-Fi - use the form athttp://www.reciva.com/ to notify Reciva ofthe problem - they can change the stationdata that is used by the radio.

Troubleshooting

12

Accessories and Spares

Remote Control: Replacement Mondo remote control.

Mains Power Supply Unit: Replacement power supply for Mondo.

Stereo RCA Leads: Replacement leads to connect Mondo to a hi-fi system or similar.

The following optional accessories and spare parts are available for Mondo.Please contact your local retailer or alternatively call us on 01555 666 161.Accessories and spare parts can also be purchased online at www.revo.co.uk

English


Safety Information

The lightning flash witharrowhead symbol within anequilateral triangle is intendedto alert the user to thepresence of uninsulated"dangerous voltage" within theproduct's enclosure that maybe of sufficient magnitude toconstitute a risk of electricshock to persons.

The exclamation point within anequilateral triangle is intendedto alert the user to thepresence of importantoperating and maintenance(servicing) instructions in theliterature accompanying theappliance.

WARNING: TO REDUCE THE RISK OF FIREOR ELECTRIC SHOCK, DO NOT EXPOSETHIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electrical shock, fire,etc:

1. Read these instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth. For stubbornstains, use a soft cloth dampened with aweak solution of mild detergent andwater. Dry the apparatus immediatelyafterwards with a clean cloth. Do not useabrasive clothes, thinners, alcohol, orother chemical solvents, because theymay damage the finish or remove thepanel lettering.

7. Do not block any ventilation openings. Theventilation shall not be impeded bycovering the ventilation openings withitems, such as newspapers, table clothes,curtains, etc.

8. Do not install near any heat source suchas radiators, heat registers, stoves, orother apparatus (including amplifiers) thatproduce heat.

9. Do not defeat the safety purpose of thepolarized or grounding - type plug. Apolarized plug has two blades with onewider than the other. A grounding typeplug has two blades and a third grounding

prong. The wide blade or the third prongare provided for your safety. If theprovided plug does not fit into your outlet,consult an electrician for replacement ofthe obsolete outlet.

10. Protect the power cord from beingwalked on or pinched particularly atplugs, convenience receptacles, and thepoint where they exit from the apparatus.If the power cord is damaged, it must berepaired by a qualified repairer.

11. Only use attachments/accessoriesspecified by the manufacturer.

12. Use only with the cart, stand, tripod,bracket or table specified by themanufacturer, or sold with the apparatus.When a cart is used, use caution whenmoving the cart/apparatus combinationto avoid injury from tip-over.

13. Unplug this apparatus during lightningstorms or when unused for long periodsof time.

14. Refer all servicing to qualified servicepersonnel. Servicing is required when theapparatus has been damaged in any way,such as power-supply cord or plug isdamaged, liquid has been spilled orobjects have fallen into the apparatus, theapparatus has been exposed to rain ormoisture, does not operate normally, orhas been dropped.

15. The apparatus shall not be exposed todripping or splashing and no objects filledwith liquids, such as vases, shall beplaced on the apparatus.

16. The mains plug or an appliance coupler isused as the disconnect device, thedisconnect device shall remain readilyoperable.

17. Please read Rating Labels at the bottomof the Sender and Receiver for powerinput and other safety information.

FCCThis device complies with Part 15 of the FCC Rules Operation that is subject to followingtwo conditions:

(1) This device may not cause harmfulinterference and,

(2) This device must accept anyinterference received, includinginterference that may cause undesiredoperation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

PORTABLE CART WARNING

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK: DO NOT REMOVE SCREWS, COVERS OR THE CABINENT. NO USER SERVICING PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

13

English


Revo Technologies Ltd The Inox Building Caldwellside Lanark Scotland United Kingdom ML11 7SR

Telephone Support 01555 666 161

Online Support www.revo.co.uk/support [email protected]

MONDO Wi-Fi Manual.qxd 10/12/07 12:02 Page 64