little josef prusa character - 3d puzzle · 45 hrs 1 pcs f 0.20 mm k 0.40 mm h pla 241 g d mk3s +...
TRANSCRIPT
45 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
PLA
241 g
d
MK3S +MMU2S
Summary
Little Josef Prusa Character was used as a source model. Printed asmultimaterial print on MK3S + MMU2S.
Read how to create your own puzzles: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
Toys & Games > Puzzles & Brain-teasers
3dpuzzle puzzle prusacek josefprusa
Ondřej Stříteský
Little Josef PrusaCharacter - 3Dpuzzle
VIEW IN BROWSER
updated 8. 7. 2019 | published 8. 7. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
54.4 MB
45.08 hrs f 0.20 mm k 0.40 mm h PLA 241.00 g d MK3S +MMU2S
updated 8. 7. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
2.5 MBupdated 8. 7. 2019
Check the first layer. If the first layer is squeezed too much, the puzzlepieces will stick together. Live-adjust-Z ;)
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
josef-prusa_02mm_pla_mk3smmu2s.gcode
josef_prusa_mmu2s.3mf