how to make adorable angel pendant diy jewelry making tutorial
TRANSCRIPT
How To Make: Adorable Angel Pendant
Materials: Around 20 inches of 26 Gauge Copper Wire, 3 Crackle Beads – size 12 mm, 1 Crackle Beads – size 8 mm, 2 Copper Beads – size 4 mm
Beads For Wings: 2 Copper Beads – size 2.5 mm, 14 Glass Tube Beads – size 1x7 mm
Beads For Head: 1 Pink Glass Bead – size 5x8 mm, 2 Bead Caps – size 8 mm, 1 Metal Bead – size 3 mm
Tools: Round Nose Pliers, Wire Cutters
Step 1: Insert two crackle beads (size 12 mm) onto the wire, then bend wires like in the photo and insert copper beads
Step 2: Insert next two crackle beads onto both wires
Step 3: Insert 3 tube beads then a copper bead then 4 tube beads on one wire, then bend wire up but through the crackle bead
Step 4: Repeat step 3 with the second/left wire to create second wing
Step 5: Insert rest of the beads and bead caps as shown in the photo
Step 6: Create final loop, wrap wire around the bottom of the loop, trim wire which is left and attach the chain. Your necklace is ready to wear!