How To Make: Blissful Leaf Pendant

Materials: 10 Inches of 20 Gauge Copper Wire, 9 Glass Beads – Size 3 mm

Tools: Round Nose Pliers, Wire Cutters

Step 1: Bend your wire in the middle, as shown in the photos

Step 2: Create a small loop then a bigger one

Step 3: Create 2 loops as shown in the photo. There are 4 loops at this side of the pendant

Step 4: Shape the pendant into a drop then insert 4 beads onto the wire

Step 5: Insert 5 beads onto the other wire and make 4 small loops. If your pendant is bigger or smaller you can make less/more loops. Important thing is that they should reach the top of the pendant

Step 6: Wrap one wire around the other to close the pendant. Trim one wire if you need to and smooth the edge

Step 7: Create hook shape, trim wire if you need to and close the hook to create a final loop

Step 8: Attach chain to the pendant. Your necklace is ready to wear!