How to Make Triple Beaded Pendant DIY Jewelry Making Tutorial

Download How to Make Triple Beaded Pendant DIY Jewelry Making Tutorial

Post on 17-Feb-2017

175 views

Category:

Design

2 download

TRANSCRIPT

<p>PowerPoint Presentation</p> <p>How To Make: Triple Beaded Pendant</p> <p>Materials: 7.5 Inches of 20 gauge copper wire, 3 crackle beads size 6 mm, 1 copper bead size 5 mm, 1 copper bead size 2.5 mm</p> <p>Tools: Round Nose Pliers, Wire Cutters</p> <p>Step 1: Insert crackle beads onto the wire</p> <p>Step 2: Bend wire as shown in the photo</p> <p>Step 3: Bend wires around beads cluster as shown in the photo, then put copper bead size 5 mm onto both wires</p> <p>Step 4: Shape wire around the copper bead, then bend it to the reverse side of the pendant. Trim wire if you need to, to create small loop at the end of the wire</p> <p>Step 5: Insert another copper bead onto the wire and wrap it around the bead as shown in the photo</p> <p>Step 6: Now bend the wire to create a hook shape, then close it. If you need to trim the wire. Now attach the chain. Your necklace is ready to wear!</p>