How To Enhance The Performance Of Your Swimming Pool Filter?

Being a pool owner, you need to keep a tab on the efficiency of your pool filtration system. For

that matter, install a high-grade pool filter and filter cartridge that ensure uninterrupted pool fun.

When it comes to swimming pool filters, you can have multiple options online. Many online

portals offer flawless pool filters and cartridges. One of the highly recommended pool filters is

Hayward pool filters. These filters are more efficient as compared to D.E filters and other brands.

If you are to retain the efficiency of your pool filtration system, you should make it a point to

clean the filter cartridge in a proper way without damaging its fibers. You can improve your

filtration by installing a pool filter of increased size. An over-sized filter can help you prevent

many water problems before they occur.

Here are some simple steps that you can follow to enhance the

performance and durability of your pool filters.

Don’t Try to Over-Clean the Filter Cartridges

When the filter cartridges are a bit dirty, they can more efficiently trap the dirt. With the already

trapped dirt, they can trap more dirt easily. Once you clean the pool filter cartridge, the fibers of

the cartridge get loosened and the dirt trapping power is alleviated to a certain extent. Consider

cleaning the cartridges with a pressure gauge ranging between 8 and 10 lbs or when the pressure

flow rate is substantially low.

Clean in a Gentle Manner

You may require a good amount of water pressure for cleaning the cartridge. However, do not use

too much water pressure, as it can cause damage to the fibers. Refrain from using pressure washer

to clean filter cartridges. You can make use of the filter flosser for maintaining a gentle and low

flow of water.

Do Away With all the Minerals and Oils

Both oils and minerals can cause clogging in the small spaces between the filter fibers. After

cleaning the cartridge, if you find that the pressure gauge is not dropping as far as it used to, clean

it with a filter cleaner for breaking down the mineral deposits as well as from removing oil from

airborne pollutants.

Content Source

Poolfilters.biz

3645 Marketplace Blvd. Suite 130-330 East

Point, GA 30344

http://blog.poolfilters.biz/how-to-enhance-the-pe

rformance-of-your-swimming-pool-filter/