swimming pool & spa solutions - fipnet · – swimming pool & spa solutions 02 – public...
TRANSCRIPT
SWIMMING POOL & SPASOLUTIONS
www.fipnet.com
The information in this leaflet is provided in good faith. No liability will be accepted concerning technical data that is not directly covered by recognised international standards. FIP reserves the right to carry out any modification. Products must be installed and maintained by qualified personnel.
CONTENTSVALVES AND FITTINGS MANUFACTURER SINCE 1954 01
SWIM AND WELLNESS – Swimming pool & SPA solutions 02 – Public swimming pool water treatment 04 – Private swimming pool water treatment 06 – Aqua park water treatment 08 – SPA & Wellness water treatment 10
CONVEYANCE OF WATER 12
CHEMICAL DOSING 13
SAND FILTRATION 14
MEMBRANE FILTRATION 15
DISINFECTION AND PH ADJUSTMENT 16
THERMOPLASTIC MATERIALS - KEY FEATURES 17
SYSTEM OVERVIEW - TECHNICAL DATA AND RANGE – Valves 18 – Pipes and Fittings 20 – Measurement and instrumentation 20
CASE HISTORY – SPA FACILITY - Italy 22 – OLYMPIC SWIMMING FACILITIES - Brazil 23
ALIAXIS WORLDWIDE 24
SOLUTIONSFIP is a reliable supplier for the most conventional pressure pipeline systems such as water distribution systems, civil and industrial water treatment, irrigation, gardening, field and greenhouse farming, sports facilities, swimming pools, aqua parks, SPA and everywhere is required ease of installation, minimum maintenance and long life.
VERSATILITYGlobal market challenge is to provide versatile products to be turned into reliable solutions, simple to install and use but effective to the needs of each application.FIP develop products able to adapt to different conditions of use, featuring design, innovation, functionality, reliability and safety.
EVERYWHEREWe are constantly investing in R&D and process technologies to improve the products offer as well as the production efficiency; indeed FIP products, available in PVC-U, PP-H, PVC-C, PVDF are able to adapt to different conditions of use always providing additional smart features such as the customization system to clearly identify each valve of the plant!
RESPONSIBILITYFIP products are manufactured in EU production sites, operating in compliance to the Quality Assurance System ISO 9001 and with the Environmental Management System ISO 14001 standards requirements. We believe that environmental sustainability must be an important component of business practices at all stages of the product life cycle; since its foundation FIP takes care of people health and safety and it is committed to a sustainable use of natural resources and environment respect.
VALVES AND FITTINGS MANUFACTURER SINCE 1954
MOLDED IN FIP PRODUCTS THERE ARE OVER 60 YEARS OF
EXPERIENCE AS WELL AS A STRONG QUEST FOR INNOVATION
KNOW-HOWSince 1954 FIP produces injection molded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays a leading European valves manufacturer.
1
SWIMMING POOL AND SPA SOLUTIONSSwimming pool and water park industry is a dynamic and growing market thanks to the evolution of process technologies, building techniques and no limit to imagination in design as well as the introduction of new European regulations concerning quality standards and technological equipment.SPA centers are, on the other hand, a distinctive element for prestigious hotels, thermae and resorts willing to provide unique wellness services.Since its foundation in 1954, FIP is providing solutions for worldwide customers in swimming pool, water park and SPA industry.
2
EVERYWHERE
SWIM AND WELLNESS
3
Pump
Balancetank
PUBLIC SWIMMING POOL WATER TREATMENTPublic swimming pool must constantly provide safe and crystal water even at peak usage times. Moreover, as the clear water recirculation must not interfere with swimmers’ performance during a competition, swimming and waterpolo facilities usually combine innovation and technology for water filtration and recirculation.
4
CHEMICALDOSING
SAND FILTRATION
CONVEYANCE OF WATER
DISINFECTION AND PH ADJUSTMENT
HeatExchanger
5
VERSATILITY
Pump
Balancetank
6
PRIVATE SWIMMING POOL WATER TREATMENTAn efficient water treatment of a private swimming pool is necessary mainly for ensuring healthy condition to every owner that can not undertake any risk for his personal and family health.Therefore a proper filtration and disinfection processes are needed for maintaining crystal clear water and for preventing the transmission of infectious waterborne diseases.
Salt chlorination
HeatExchanger
RESPONSIBILITY
7
MEMBRANEFILTRATION
CONVEYANCE OF WATER
Pump
DISINFECTION AND PH ADJUSTMENT
HeatExchanger
8
AQUA PARK WATER TREATMENTNowadays aqua parks have become more demanding concerning design flexibility and usage of corrosion free materials, water valves and filter systems.Increasing environment sensibility requires efficient recovery systems and recycled water as well as geothermal and solar heaters.Safe clean water in a well-protected environment for children and adults of all ages are hallmarks of water parks’ advertising and track records.
SAND FILTRATION
KNOW-HOW
Balancetank
9
CHEMICALDOSING
CONVEYANCE OF WATER
Pump
UltravioletDisinfection (UV)
Balancetank
10
SPA & WELLNESS WATER TREATMENTHotel and Resort invest in amazing pools and SPA facilities to attract and retain their guests and to distinguish in a high competitive sector.Water quality is a vital factor for SPA tourism industry: to meet the high expectations of customers, the most beautiful pools or luxurious SPA should be able to always grant excellent water quality standard.
SAND FILTRATION
UltravioletDisinfection (UV)
HeatExchanger
DISINFECTION AND PH ADJUSTMENT
SOLUTIONS
11
CONVEYANCE OF WATER
CONVEYANCE OF WATERA safe and efficient conveyance of water involved in every swimming pool and SPA facilities is also necessary for avoiding chemical corrosion problems and for maintaining low O&M costs.PVC-U and PVC-C resins guarantee excellent chemical resistance, optimal thermal stability and an extremely extended lifetime. PVC-U and PVC-C systems offer pipes and fittings for solvent welding to convey swimming pool and SPA water under pressure at a maximum operating temperature of 100 °C. The range includes a complete choice of ball valves, butterfly valves and check valves.
FIP SYSTEM FOR CONVEYANCE OF WATER
FIP KEY PRODUCTS
VEEEasyfit 2-way ball valveMain features n Innovative quick release Easyfit handle used as a ball seat adjustment tooln Settings for the customisable Labelling System using the LCE module n Stem with high surface finish, double o-ring and PTFE anti-friction disktem extension on requestn Valve body set for SHE kit installation that blocks the handle closing and opening
FKButterfly valve - large boreMain features n New largest dimensions: DN350-400n Nominal pressure up to PN 7 with water at 20 °Cn Body PP-GR resistant to UV rays and characterised by high mechanical strengthn Interchangeable liner in EPDM or FPM with the dual function of hydraulic seal and isolating the body from the fluidn Disk available in different thermoplastic materials (PVC-U, PP-H and PVDF)n Stainless steel AISI 316 square section stem completely isolated from the fluid complying with ISO 5211n Drilling pattern according to DIN or ANSI standards
Pipe and FittingPVC-U and PVC-C
Main featuresn Pipes and fittings are designed for conveying fluids under pressure with a cold chemical weld jointing system (solvent welding)n All products follow the highest quality standards: ISO9001 for the Quality Assurance System and ISO14001 for the Environmental Management System. n Construction criteria and test methods and requirements according to EN ISO 15493
12
Product group Range Actuation PVC-U PVC-C PP-H PE
Valves
Ball valves up to DN100 Manual Electric Pneumatic n n n End connector
Butterfly valves up to DN400 Manual Electric Pneumatic n n n -
Check valves up to DN300 Self - - n n n End connector
Fittings - up to d1000 - - - n n n n
Pipes - up to d600 - - - n* n n n*
* Traded
CHEMICAL DOSING The chemical dosing is a crucial part of swimming pool and aqua park processes because the suspended particles are different in size, composition, charge and density.The addition of coagulants and flocculants is an essential method used before the filtration process and it is necessary to destabilize and agglomerate colloidal matters. In most of these cases, the chemicals used are corrosive and dangerous. For this reason, it is required high chemical resistance and extended lifetime of the system.
Ball valve
Diaphragm valve
Check valve
Pipe& fitting
pH/ temperature monitoring
ORP/ temperature monitoring
Flow monitoring
Pressure/level monitoring
Flowmeter
VKD DK SXE PVC-U PH 200 ORP 200 F6.60 HF6 FS-FC
VXE DK/CP SSE PVC-C PH 222 ORP 222 F6.30 M9.10
VKR PH 660 ORP 660 F3.80
VKR/CE PH 870 M9.06 F3.00
VKD/CE-CP M9.06 M9.02
M9.08
FIP SYSTEM FOR CHEMICAL DOSING
FIP KEY PRODUCTS
DKDIALOCK® 2-way diaphragm valveMain featuresn New body design for higher flow coefficientn Ergonomic hand wheel and bonnet in PP-GR with PVC cap for an excellent chemical resistancen Dialock® system: innovative handwheel with a patented locking device that allows it to be adjusted and locked in over 300 positions.n DKL version with integrated Stroke limiter and Travel stopn Customisation plate and TAG ready
VKD/CEElectrically actuated DUAL BLOCK® 2-way ball valveMain featuresn Electric actuator selected by FIP according to its requirements of quality and reliabilityn ON/OFF or modulating functions.n Thermoplastic case to prevent corrosion: IP66 protection classn Manual override as standard and availability of a wide range of accessoriesn DUAL BLOCK® patented union nut locking systemn Floating full bore ball with high surface finishn Integrated bracket for valve anchoring
ORP 200/222Epoxy body bulb electrodeMain featuresn Epoxy bodyn Single or double junction technologyn Large gel reference volumen Easy and quick installation systemn Outline cable or BNC connectionn Low cost fittingsn Special version on request
13
SAND FILTRATION
Ball valve
Butterfly valve
Diaphragm valve
Checkvalve
Pipe& fitting
Flow monitoring
Pressure/ level
monitoring
Flowmeter
VKD FK DK SSE PVC-U F6.60 HF6 FS-FC
VXE FK/CP DK/CP SXE PVC-C F6.30 M9.10
VEE FE VM VR PP-H F3.00
VKD/CP FE/CP VM/CP PE M9.02
TKD/CP
FIP SYSTEM FOR SAND FILTRATION
Sand filtration is the heart of the process and it is used for achieving an accurate removal of suspended solids and pathogens. This kind of filtration system is the most common and simple to use with low maintenance and long lifetime. Furthermore, the sand, as filter medium, is easy to find in the market and the filtration quality can improve thanks to coagulation and flocculation processes.Sand filtration system is equipped with automated backwashing and rinsing in order to keep a high level of efficiency.
FIP KEY PRODUCTS
FK/CPPneumatically actuated butterfly valveMain features n Pneumatic actuator selected by FIP according to its requirements of quality and reliability.n Normally Closed, Normally Open or Double action Functions.n Valve body in PP-GR resistant to UV rays completely isolated from the fluidn Valve disc in PVCU, PVCC, PPH or PVDFn Stainless steel stem completely isolated from the fluidn Availability of a wide range of accessories
FEButterfly valveMain featuresn Ergonomic multifunctional handle in HIPVC with the option for quick operation and graduated adjustment in 12 positionsn Customisable labelling systemn Drilling pattern with oval slots that allow coupling to flanges according to numerous international standardsn Interchangeable liner with the dual function of forming a hydraulic seal and isolating the body from the fluidn Stem in stainless steel AISI 316
HF6 and M9.10Level/pressure transmitter and monitor
Main featuresn Level/Pressure/Depth measurement provided by the same transmittern Level measurement not affected by foam or vapourn Semi flush ceramic diaphragm for a long-lasting operating timen Options for gauge pressure and for absolute pressuren Monitor able to manage analog and frequency signals (or two analog signals) with wide graphic display and multicolor backlight
14
MEMBRANE FILTRATIONMembrane filtration is another common kind of pool filter for the removal of particulates and natural organic material. Particularly, microfiltration (MF) through cartridge filter is the most used membrane filtration in theswimming pool & SPA industry, removing material up to approximately 5 microns. MF filters finer particles and requires less water flow and less energy than a sand filter. On the other side, the cartridge filter uses a paper filter medium which simply does not last as long as sand media and requires replacement every 3-5 years.
FIP SYSTEM FOR MEMBRANE FILTRATION
FIP KEY PRODUCTS
Ball valve
Butterfly valve
Diaphragm valve
Checkvalve
Pipe& fitting
Flowmonitoring
VKD FK DK SSE PVC-U F6.60
VXE FE SXE PVC-C F6.30
VEE VR PE F3.00
M9.02
VXEEasyfit 2-way ball valveMain featuresn Easyfit ergonomic multifunctional handle with union nut tightening controln Customisable Labelling System on the handle to identify the valve on the system according to specific needsn PTFE ball seat system with locked carrier and valve stem with double O-Ringn High surface finish valve stem with double o-ring, produced in CNC work stations
SSEEasyfit true union spring check valveMain features n Ideal for horizontal installation: perfect seal even with low back pressuren Optimised dynamic fluid design: energy savings thanks to the improved valve Kv value with consequent pressure drop reductionn Customisable labelling systemn PVC-U shutter and springs available made of stainless steel 316, hastelloy C276, A316 PTFE encapsulated
15
F6.60Magmeter flow sensorMain featuresn Accurate measurement of dirty liquidsn Pipe size range: from DN15 (0,5”) to DN600 (24”)n Low pressure dropn 4-20 mA, frequency or volumetric pulse output settable by friendly SW through USB connection n Bi-directional flow measurement selectablen Special versions on request
DISINFECTION AND PH ADJUSTMENTThe disinfection has the aim to destroy pathogens harmful to the health of the bather, to keep the water clear, disinfected and without unpleasant odors. Today the most common system for water disinfection is chlorine since it oxidizes both the organic and the metal substances in the water and disinfects it from bacteria and virus. On the other hand, the pH control and adjustment is very important for the swimmer comfort and for the protection of the pool system and its components.
FIP SYSTEM FOR DISINFECTION AND PH ADJUSTMENT
FIP KEY PRODUCTS
PH 200/222Epoxy body bulb electrodeMain featuresn Single or double junction technologyn Large gel reference volumen Easy and quick installation systemn Outline cable or BNC connectionn Version with temperature sensor combinedn Low cost fittingsn Special version on request
VKRDUAL BLOCK® regulating ball valveMain features n Patented ball design to provide linear flow adjustment throughout its range of operation even when the valve is open just a few degreesn Flow direction and opening angle indication plate with 5° resolution graduated scale for clear and accurate readingn DUAL BLOCK® patented union nut locking systemn SEAT STOP® ball carrier system that allows micro-adjustments of the ball seats, guarantees optimal operability and increases the service life
DK/CPPneumatically actuated 2-way diaphragm valveMain featuresn New body design for higher flow coefficient n High visibility optical position indicatorn Light and compact piston type actuator in PP-GRn Long lifetime without maintenance ensured by the actuator design and the floating pin connection between the actuator stem and diaphragmn Customisation plate and TAG readyn Integrated bracket for valve anchoring
Ball valve
Diaphragm valve
Check valve
Pipe& fitting
pH/ temperature monitoring
ORP/ temperature monitoring
Flow monitoring
Pressure/ level
monitoring
Flowmeter
VKD DK SXE PVC-U PH 200 ORP 200 F6.60 HF6 FS-FC
VXE DK/CP SSE PVC-C PH 222 ORP 222 F6.30 M9.10
VKR PH 660 ORP 660 F3.80
VKR/CE PH 870 M9.06 F3.00
VKD/CE-CP M9.06 M9.02
M9.08
16
THERMOPLASTIC MATERIALS KEY FEATURESThe success of thermoplastic materials, together with the ease of installation, the minimum maintenance and long life, has brought them even in most conventional pressure pipeline systems.
Polypropylene is a thermoplastic and partially crystalline resin belonging to the family of polyolefins. PP is obtained through the polymerization of propylene (C3H6) with the aid of catalysts. For use in piping systems, the latest-generation Polypropylene Homopolymer variant, or PP-H, offers excellent performance at working temperatures of up to 100° C and a high resistance to chemicals due to the excellent physical and thermal characteristics of the resin.
Material PP-H (100) Polypropylene homopolymer
Coupling standards Socket and butt weldingRange from DN10 to DN400
Working pressure classes up to PN10
Working temperature range From 0°C to 100°C
PP-H
Polyethylene is a polyolefin, which forms a separate group among the semi-crystalline thermoplastics. Polyethylene, commercially known as PE, is an umbrella term for a group of individually distinctive PE types.PE-HD has an average high density between 0.94-0.965 g/cm3. Due to its greater strength, the use of PE100 (density 0.958 g/cm3) is increasingly more common in pressure pipe construction.
Material PE100 Polyethylene high density
Coupling standards Butt welding and electrofusion
Range from DN10 to DN1000
Working pressure classes up to PN16
Working temperature range From -40 °C to 60 °C
PE
Developed in 1958 by the company BF Goodrich, now LUBRIZOL, PVC-C (post-chlorinated polyvinyl chloride) is obtained by chlorinating the PVC resin in suspension. During the transformation, alternate hydrogen atom monomers in the PVC molecular chain are replaced by chlorine atoms. The process produces a high performance resin with excellent thermal stability, chemical and mechanical strength up to temperatures of 100°C.
MaterialPVC-C Chlorinated Polyvinylchloride, made of CORZAN® resin only
Coupling standards Solvent welding
Range from DN10 to DN300
Working Pressure classes up to PN16
Working temperature range From 0 °C to 100 °C
PVC-C
Material PVC-U Unplasticized Polyvinyl Chloride
Coupling standards Solvent welding
Range from DN10 to DN500
Working pressure classes up to PN16
Working temperature range From 0 °C to 60 °C
PVC-UDeveloped in 1930 in Germany, PVC-U (rigid polyvinyl chloride –unplasticized) is obtained through the polymerization of a vinyl chloride monomer. The presence of chlorine in the PVC-U molecule results in a high performance resin, in terms of thermal stability and chemical and mechanical resistance, up to temperatures of 60° C.
17
SYSTEM OVERVIEWTECHNICAL DATA AND RANGE VALVES
Product group Type Range Description Actuation PVC-U PVC-C PP-H
Ball valves
VKD DN 10÷100 Industrial ball valve Manual PN 16 PN 16 PN 10
VKD/CE DN 10÷100 Industrial ball valve with electric actuator Electric up to PN 16 up to PN 16 PN 10
VKD/CP DN 10÷100 Industrial ball valve with pneumatic actuator Pneumatic up to PN 16 up to PN 16 PN 10
VKR DN 10÷50 Regulating ball valve Manual PN 16 PN 10
VKR/CE DN 10÷50 Regulating ball valve with modulating electric actuator Electric up to PN 16 PN 10
TKD DN 10÷50 Three way Industrial ball valve Manual PN 16 PN 16 PN 10
TKD/CE DN 10÷50 Three way Industrial ball valve with electric actuator Electric up to PN 16 up to PN 16 PN 10
TKD/CP DN 10÷50 Three way Industrial ball valve with pneumatic actuator Pneumatic PN 16 PN 16 PN 10
VXE DN 10÷100 Two way universal ball valve Manual PN 16 PN 16
VXE/CE DN 65÷100 Two way Universal ball valve with electric actuator Electric up to PN 10 up to PN 10
VXE/CP DN 65÷100 Two way Universal ball valve with pneumatic actuator Pneumatic up to PN 6 up to PN 6
VEE DN 10÷100 Two way Water ball valve Manual PN 16
Butterfly valves
FK DN 40÷400 Industrial butterfly valve Manual up to PN 16 up to PN 16 up to PN 10
FK/CE DN 40÷400 Industrial butterfly valve with electric actuator Electric up to PN 16 up to PN 16 up to PN 10
FK/CP DN 40÷400 Industrial butterfly valve with pneumatic actuator Pneumatic up to PN 16 up to PN 16 up to PN 10
FE DN 40÷200 Water butterfly valve Manual up to PN 16
FE/CE DN 40÷200 Water butterfly valve with electric actuator Electric up to PN 16
FE/CP DN 40÷200 Water butterfly valve with pneumatic actuator Pneumatic up to PN 16
Diaphragm valves
DK DN 15÷65 Diaphragm valve Manual PN 10 PN 10 PN 10
DK/CP DN 15÷65 Diaphragm valve with pneumatic actuator Pneumatic PN 10 PN 10 PN 10
VM DN 80÷100 Diaphragm valve Manual up to PN 10 up to PN 10 up to PN 10
VM/CP DN 80÷100 Diaphragm valve with pneumatic actuator diaphragm type Pneumatic up to PN 6 up to PN 6 up to PN 6
CM DN 12÷15 Compact diaphragm valve Hand PN 6 PN 6 PN 6
CM/CP DN 12÷15 Compact diaphragm valve with pneumatic actuator piston type Pneumatic PN 6 PN 6 PN 6
Check valves
SR DN 15÷50 Ball check valve Self PN 10
SXE DN 10÷100 True union ball check valve Self PN 16 PN 16
SSE DN 10÷100 True union spring check valve Self PN 16
CR DN 40÷300 Wafer check valve Self PN 5
VR DN 10÷100 Angle seat check valve Self up to PN 16 up to PN 10
FR DN 32÷300 Wafer check valve Self PN 6 PN 6
Pressure control valves
SV DN 15÷25 Angle seat relief valve Self PN 16
VSF DN 10÷100 Diaphragm relief valve Self up to PN 10 up to PN 10
VCP DN 10÷100 Diaphragm back valve Self up to PN1 0 up to PN 10
VPR DN 10÷100 Pressure reducing valve Self up to PN 10
Ancillary valves
RV DN 10÷100 Sediment strainer - up to PN 16 PN 16 DN 10-50 up to PN 10
VV DN 10÷50 Angle seat valve Manual up to PN 16
VA DN 10÷50 Air release valve Self PN 16
VZ DN 10÷50 Foot valve Self PN 16
PN: nominal pressure with water at 20 °C
SYSTEM OVERVIEWTECHNICAL DATA AND RANGE
18
VALVES
Product group Type Range Description Actuation PVC-U PVC-C PP-H
Ball valves
VKD DN 10÷100 Industrial ball valve Manual PN 16 PN 16 PN 10
VKD/CE DN 10÷100 Industrial ball valve with electric actuator Electric up to PN 16 up to PN 16 PN 10
VKD/CP DN 10÷100 Industrial ball valve with pneumatic actuator Pneumatic up to PN 16 up to PN 16 PN 10
VKR DN 10÷50 Regulating ball valve Manual PN 16 PN 10
VKR/CE DN 10÷50 Regulating ball valve with modulating electric actuator Electric up to PN 16 PN 10
TKD DN 10÷50 Three way Industrial ball valve Manual PN 16 PN 16 PN 10
TKD/CE DN 10÷50 Three way Industrial ball valve with electric actuator Electric up to PN 16 up to PN 16 PN 10
TKD/CP DN 10÷50 Three way Industrial ball valve with pneumatic actuator Pneumatic PN 16 PN 16 PN 10
VXE DN 10÷100 Two way universal ball valve Manual PN 16 PN 16
VXE/CE DN 65÷100 Two way Universal ball valve with electric actuator Electric up to PN 10 up to PN 10
VXE/CP DN 65÷100 Two way Universal ball valve with pneumatic actuator Pneumatic up to PN 6 up to PN 6
VEE DN 10÷100 Two way Water ball valve Manual PN 16
Butterfly valves
FK DN 40÷400 Industrial butterfly valve Manual up to PN 16 up to PN 16 up to PN 10
FK/CE DN 40÷400 Industrial butterfly valve with electric actuator Electric up to PN 16 up to PN 16 up to PN 10
FK/CP DN 40÷400 Industrial butterfly valve with pneumatic actuator Pneumatic up to PN 16 up to PN 16 up to PN 10
FE DN 40÷200 Water butterfly valve Manual up to PN 16
FE/CE DN 40÷200 Water butterfly valve with electric actuator Electric up to PN 16
FE/CP DN 40÷200 Water butterfly valve with pneumatic actuator Pneumatic up to PN 16
Diaphragm valves
DK DN 15÷65 Diaphragm valve Manual PN 10 PN 10 PN 10
DK/CP DN 15÷65 Diaphragm valve with pneumatic actuator Pneumatic PN 10 PN 10 PN 10
VM DN 80÷100 Diaphragm valve Manual up to PN 10 up to PN 10 up to PN 10
VM/CP DN 80÷100 Diaphragm valve with pneumatic actuator diaphragm type Pneumatic up to PN 6 up to PN 6 up to PN 6
CM DN 12÷15 Compact diaphragm valve Hand PN 6 PN 6 PN 6
CM/CP DN 12÷15 Compact diaphragm valve with pneumatic actuator piston type Pneumatic PN 6 PN 6 PN 6
Check valves
SR DN 15÷50 Ball check valve Self PN 10
SXE DN 10÷100 True union ball check valve Self PN 16 PN 16
SSE DN 10÷100 True union spring check valve Self PN 16
CR DN 40÷300 Wafer check valve Self PN 5
VR DN 10÷100 Angle seat check valve Self up to PN 16 up to PN 10
FR DN 32÷300 Wafer check valve Self PN 6 PN 6
Pressure control valves
SV DN 15÷25 Angle seat relief valve Self PN 16
VSF DN 10÷100 Diaphragm relief valve Self up to PN 10 up to PN 10
VCP DN 10÷100 Diaphragm back valve Self up to PN1 0 up to PN 10
VPR DN 10÷100 Pressure reducing valve Self up to PN 10
Ancillary valves
RV DN 10÷100 Sediment strainer - up to PN 16 PN 16 DN 10-50 up to PN 10
VV DN 10÷50 Angle seat valve Manual up to PN 16
VA DN 10÷50 Air release valve Self PN 16
VZ DN 10÷50 Foot valve Self PN 16
19
SYSTEM OVERVIEWTECHNICAL DATA AND RANGE
MEASUREMENT AND INSTRUMENTATIONProduct group type Description M9.00 M9.02 M9.03 M9.20 M9.50 M9.05 M9.06 M9.07 M9.08 M9.10
Flow
F3.00 Paddlewheel Flow sensor n n n n n n n nF3.20 High pressure Paddlewheel sensor n n n n n n nF6.30 Paddlewheel Flow Transmitter Transmitter / PLC
F3.10 Paddlewheel Mini Flow sensor n n n n n n nF3.05 Paddlewheel Flow switch
F6.60 Magmeter Flow Sensor n n n n n nF6.61 Hot Tap Magmeter Flow Sensor n n n n n nF111 Hot Tap Paddlewheel and Turbine Flow sensor n n n n n n n nULF Ultra Low Flow sensor n n n n n n n n
F3.80 Oval Gear Flow sensor n n n n n n
pH/ORP
pH/ORP 200 Epoxy body Bulb electrodes n npH/ORP 400 Glass body Bulb electrodes n npH/ORP 600 PVC-C Body Flat Surface electrodes n n
pH 800 Ryton Body Flat Surface electrodes n n
Conductivity
C150-200 Graphite or Platinum Conductivity sensors n nC100-300 Stainless steel Conductivity sensors n n
C6.30 Inductive Conductivity Transmitter Transmitter / PLC nPressure/Level HF6 Level and Pressure Transmitter Transmitter / PLC n
PIPES AND FITTINGSProduct group Description PVC-U PVC-C PP-H PE
Fittings
Solvent Welding ISO-DIN standard PN 16d 12÷500
PN 16d 16÷200
Adaptor fittings Solvent Welding/Threaded ISO-UNI/BSP standard PN 16d 16÷125
PN 16d 16÷63
Solvent Welding BS Imperial standard PN 16d 1/2”÷8”
Socket Welding ISO-UNI Standard PN 10d 20÷110
Adaptor fittings Socket Welding/Threaded ISO-UNI/BSP Standard PN 10d 20÷63
Butt Welding ISO-UNI Standard up to PN 10 d 20÷400
up to PN16 d 16÷1000
Adaptor fittings Butt Welding/Threaded ISO-UNI/BSP Standard up to PN 10 d 20÷63
Pipe Solvent, Butt and Socket Welding ISO-DIN Standard up to PN 16 d 16÷315*
up to PN 16 d 16÷200
up to PN 10 d 20÷400
up to PN 16d 16÷600*
* Traded
20
MEASUREMENT AND INSTRUMENTATIONProduct group type Description M9.00 M9.02 M9.03 M9.20 M9.50 M9.05 M9.06 M9.07 M9.08 M9.10
Flow
F3.00 Paddlewheel Flow sensor n n n n n n n nF3.20 High pressure Paddlewheel sensor n n n n n n nF6.30 Paddlewheel Flow Transmitter Transmitter / PLC
F3.10 Paddlewheel Mini Flow sensor n n n n n n nF3.05 Paddlewheel Flow switch
F6.60 Magmeter Flow Sensor n n n n n nF6.61 Hot Tap Magmeter Flow Sensor n n n n n nF111 Hot Tap Paddlewheel and Turbine Flow sensor n n n n n n n nULF Ultra Low Flow sensor n n n n n n n n
F3.80 Oval Gear Flow sensor n n n n n n
pH/ORP
pH/ORP 200 Epoxy body Bulb electrodes n npH/ORP 400 Glass body Bulb electrodes n npH/ORP 600 PVC-C Body Flat Surface electrodes n n
pH 800 Ryton Body Flat Surface electrodes n n
Conductivity
C150-200 Graphite or Platinum Conductivity sensors n nC100-300 Stainless steel Conductivity sensors n n
C6.30 Inductive Conductivity Transmitter Transmitter / PLC nPressure/Level HF6 Level and Pressure Transmitter Transmitter / PLC n
PIPES AND FITTINGSProduct group Description PVC-U PVC-C PP-H PE
Fittings
Solvent Welding ISO-DIN standard PN 16d 12÷500
PN 16d 16÷200
Adaptor fittings Solvent Welding/Threaded ISO-UNI/BSP standard PN 16d 16÷125
PN 16d 16÷63
Solvent Welding BS Imperial standard PN 16d 1/2”÷8”
Socket Welding ISO-UNI Standard PN 10d 20÷110
Adaptor fittings Socket Welding/Threaded ISO-UNI/BSP Standard PN 10d 20÷63
Butt Welding ISO-UNI Standard up to PN 10 d 20÷400
up to PN16 d 16÷1000
Adaptor fittings Butt Welding/Threaded ISO-UNI/BSP Standard up to PN 10 d 20÷63
Pipe Solvent, Butt and Socket Welding ISO-DIN Standard up to PN 16 d 16÷315*
up to PN 16 d 16÷200
up to PN 10 d 20÷400
up to PN 16d 16÷600*
21
SPA FACILITYITALY
Type Model Material Actuation Connection Size GasketTwo way water ball valves VEE PVC-U Manual Socket welding up to DN50 EPDM
Water butterfly valves FE PVC-U Manual Flanged up to DN125 EPDM
Industrial butterfly valves FK PVC-U Manual Flanged up to DN125 EPDM
Industrial butterfly valves FK/CP PVC-U Pneumatic Flanged up to DN125 EPDM
Sediment strainer valves RV PVC-U - Socket welding up to DN50 EPDM
Flow monitor M9.02 PVC-U - Wall mount - -
The new San Pellegrino SPA, located in the Province of Bergamo, northern Italy, has been constructed by QC Terme. The building is characterized by restored frescoes, colonnades and early twentieth century ceilings merge with modern architecture and the facility allows to enjoy a thermal bath in the world’s most famous water.
All the thermal baths of the SPA facility have a specific water temperature and a dedicated water treatment plant that includes sand filtration, UV system, disinfection and pH adjustment skids.
QC Terme, one of the most important and innovative player for thermal and wellness sectors and hotel accommodations, gives experiences that improve the quality of life and moments of gratification, vitality and joy. Thermal baths, wellness centers and charming hotels in Bormio, Pré Saint Didier, Milano, Torino, Monte Bianco, Roma, San Pellegrino Terme and in the Dolomites.
FIP has supplied to QC Terme all manual and actuated valves of
The new SPA, located in San Pellegrino Terme, northern Italy, allows to enjoy a thermal bath in the world’s most famous water.
PROJECT
TECHNICAL SOLUTIONFIP has supplied to QC Terme all manual and actuated valves of the facility in PVC-U.
Each thermal bath has a balance tank and a chlorine dosing for water disinfection only when strictly required.
Sand filtration is the heart of the process and it is used for achieving high quality level of removal of suspended solids and pathogens. QC Terme has used ball valves (VEE series) and manual and pneumatically actuated butterfly valves (FK series) because this package is equipped with automated backwash system in order to keep a high level of efficiency. In this way, the customer has taken advantage of PP-GR body with stainless steel stem of FK valve that guarantees high performance and long-term reliability.
The conveyance of water is managed through flow monitor (M9.02 series) and butterfly valves (FE and FK series) that have allowed ease of installation and minimum maintenance.
At the end of the water treatment process, QC Terme uses UV disinfection system and pH adjustment skid in order to control the potential of hydrogen before returning water to the thermal bath.
PRODUCTS SELECTION
22
OLYMPIC SWIMMING FACILITIES BRAZIL
Type Model Material Actuation Connection Size GasketTwo way water ball valves VEE PVC-U Manual Socket welding up to DN100 EPDM
Industrial butterfly valves FK PVC-U Manual Flanged up to DN300 EPDM
Water butterfly valves FE PVC-U Manual Flanged up to DN200 EPDM
Ball check valves SXE PVC-U Self Socket welding up to DN100 EPDM
Angle seat check valve VR PVC-U Self Socket welding up to DN100 EPDM
Sediment strainer valves RV PVC-U - Socket welding up to DN100 EPDM
Fittings - PVC-U - Socket welding up to DN300 EPDM
The Rio 2016 Olympics has chosen the Italian company Myrtha Pools to equip all 18 swimming facilities with state-of-the-art pool technology and FIP valves. For the first time, the Olympic swimming and water polo competitions are held in temporary pools that have been dismounted and repositioned in other Brazilian locations at the end of the event.
This has been possible because the swimming facilities were made by Myrtha Pools with the innovative modular system Myrtha, developed in over 50 years of know-how and expertise increasing.
FIP is proud to have contributed to the success of this prestigious Italian company through several years of constant collaboration focused on the improvement of our valves, in order to satisfy the requirements of reliability, simplicity of installation and long life required by the plant designers and engineers.
Today, FIP can be proud to have provided the over 1000 ball valves (VEE series) and butterfly valves (FE e FK series), from DN25 to DN300, that have been installed in the water treatment plants of the Olympic Park in Rio, the heart of each pool.
Ball check valves (SXE series), sediment strainer valves (RV series), angle seat check valves (VR series) and fittings complete the thermoplastic package for this important project.Rio 2016 Olympics
has chosen the made in Italy for all 18 swimming facilities as a guarantee of high technological level and reliability.
PROJECT
TECHNICAL SOLUTION
PRODUCTS SELECTION
23
We are a global leader in the manufacturing and distribution of fluid handling solutions. Our extensive plastic pipes and fittings offering finds its way into buildings, infrastructure and industrial applications all over the world. With a global workforce of more than 16,000 employees, our flexibility means we provide both standard and tailored solutions that match the needs of our customers and end-users perfectly. Our Group is active through more than 100 manufacturing and commercial companies, operating in over 45 countries. Aliaxis is privately owned, and our global headquarters is in Brussels, Belgium.
CUSTOMER-FOCUSED INNOVATIONInnovation is key for Aliaxis. In our highly competitive sector, innovation is one of the most powerful differentiators. We invest in market-leading R&D and dedicate people to develop what our customers need - products and solutions to get projects up and running, quickly, easily, reliably and more profitably. And by sharing practices and learning from colleagues and customers around the world, we innovate at speed.
THE ALIAXIS GROUP
HEALTH AND SAFETY ABOVE ALLThe health, safety and well being of our employees are our top priority. We aim to raise our overall safety performance, with a goal of zero accidents worldwide. Our global safety community, consisting of HSE managers from our different divisions, is dedicated to streamlining the structural exchange and the transfer of best practices.
COMMITTED TO THE ENVIRONMENTLifecycle analyses have shown that plastic pipe systems are not only more environmentally-friendly but also healthier alternatives to pipes made from other materials. But we don’t rest on our laurels. Environmental protection is taken into account for each of our business processes. Our environmental programme defines specific KPIs for monitoring CO2 emissions, non-recycled waste and water consumption. It also includes initiatives aimed at sharing best practices and training, as well as raising environmental awareness among our employees.
ALIAXIS WORLDWIDE
24
n AKATHERM - Netherlands
n DURAPIPE - United Kingdom
n AKATHERM-FIP - Germany
n ALIAXIS UI - France
n ALIAXIS UI - Spain
n NICOLL - Greece
n ALIAXIS UI - Russia
n ALIAXIS UI - Poland
n ALIAXIS UI - Hungary & CEE
n ALIAXIS UI - Bulgaria
n ALIAXIS UI - Serbia
n ALIAXIS UI - Romania
n GLYNWED UAB - Baltics
n ALIAXIS - Singapore & SEA
n ALIAXIS Fluid Systems - China
n VINIDEX - Australia
n RX PLASTICS - New Zealand
n IPEX - Canada
n IPEX - USA
n HARRINGTON INDUSTRIAL PLASTICS - USA
n HARRINGTON INDUSTRIAL PLASTICS - Mexico
n DURMAN - Mexico
n NICOLL - Peru
n NICOLL - Brazil
n VINILIT - Chile
n DURMAN - Colombia
n DURMAN - Costa Rica
n NICOLL - Uruguay
n MARLEY - South Africa
THE ALIAXIS DISTRIBUTION NETWORK
25
FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova ItalyTel. +39 010 9621.1 Fax +39 010 [email protected]
www.fipnet.com
LESP
SPR
OM
- 06
/201
7