courses for industry 2020/21...• using videos for marketing purpose • using igtv facebook for...

Courses for Industry

2020/21

2

Helping Your BusinessAt Southern Regional College, the Business Support and Innovation team understand that a highly skilled and motivated workforce is an essential component for a business to innovate, compete and grow.

Our highly skilled and qualified Business Development team can help identify your specific skills needs and offer flexible solutions to meet these needs.

What we offer:• Training Needs Analysis to establish skills gaps

• Tailored training solutions specific to your business, which can be delivered at a time and a place that suits you

• Funded Support – in some cases you may be eligible for 100% funding towards the cost of accredited training (recently introduced by the Department for the Economy (DfE) in response to the Covid-19 pandemic).

• Bespoke solutions at competitive prices.

• Online and blended training programmes in a range of areas

For more information contact us on 028 3839 7778 / 028 3025 9664 or email us at [email protected]

*For fully funded courses, please note that Terms and Conditions apply.SRC offers a wide range of courses to industry so please do not hesitate to contact us if the course you require is not listed.We endeavour to remain flexible during the current climate therefore delivery methods may be subject to change.

3

Skills Focus The Skills Focus programme has been developed to increase the skills levels and employability of employees within the existing workforce. The programme allows a tailored training solution for SMEs to upskill their staff.

The programme is supported by the Department for the Economy (DfE) and in response to the challenges that have arisen due to the Covid-19 pandemic, DfE is offering up to 100% funding towards the cost of selected non-mandatory training programmes.

Overview:

• Open to companies with less than 250 staff

• Private sector NI companies eligible only

• Support is available for accredited training at level 2 or above

• Southern Regional College can create new programmes to suit your needs

• Offers a range of accredited courses

• Tailored delivery and training location to meet your company requirements

Please note there is limited availability on fully funded Skills Focus places. Apply quickly to avoid disappointment.

If your business does not qualify for Skills Focus funding, or the training you require is not listed, please contact us and we will endeavour to meet your needs at competitive prices.

4

Contents• Administration & Accountancy

• Automotive

• Clinical & Beauty

• Childcare

• Construction Trades

• Digital Construction

• Digital Skills

• Electrical/Gas

• Engineering

• Health & Safety

• Health & Social Care

• Hospitality

• Leadership & Management

• Science

NEW Master Classes/Workshops

• Instagram for Business

• Facebook for Business

• LinkedIn for Business

• Digital Tools Unit BASIC

• Advanced Word Workshop

• Advanced PowerPoint Workshop

• Motor Vehicle Diagnostic Procedures and

Equipment Masterclass

• Motor Vehicle Diagnostics using Oscilloscopes

Masterclass

• Motor Vehicle 12/24 volt Electrical Systems

Masterclass

• Volt Electrical Systems Masterclass


5

Master ClassesInstagram for Business The Course will introduce Instagram and why it is an effective marketing platform for business. Participants will develop skills on how to identify their target market on the platform and create engaging content that increases sales. It will enable the learner to understand the basic principles of:

• Understand Instagram’s feed• Using Instagram’s Story feature• Using Videos for marketing purpose • Using IGTV

Facebook for Business This basic toolkit is a practical digital marketing course that allows participants to develop their practical skills on how to identify their target market on the platform and create engaging content that increases sales.

The course aims to:• Understand how Facebook for Business works• Create a Facebook Business Page • Create attractive images for Facebook using Canva• Monitor online engagement and understand the page

statistics• Developing a Strategy to grow your business

LinkedIn for Business The Course will introduce LinkedIn and why it is an effective marketing platform for business. Participants will develop skills in engagement, footfall and sales. It will enable the learner to understand the basic principles of:

• Understanding how LinkedIn networking works• Creating an attractive and professional profile• Developing a Strategy to grow your business

Digital Tools This basic toolkit is a practical digital marketing course that allows participants to develop their practical skills in planning and developing digital marketing campaigns. The course aims to introduce a variety of digital marketing tools to grow your business:

• Canva for image editing• Facebook Ads Manager for paid advertising• LinkedIn for Business• Instagram for Business

Campus Start Date End Date Day Start Finish time time

Duration

Cost

Newry 18/09/2020 18/09/2020 Friday 09:30 12:30

Armagh 22/01/2021 22/01/2021 Friday 09:30 12:30

1 day

£30.00


Duration

Cost

Newry 20/11/2020 20/11/2020 Friday 09:30 12:30

1 day

£30.00


Duration

Cost

Armagh 05/11/2020 05/11/2020 Thursday 09:30 16:30

1 day

£75.00Campus Start Date End Date Day Start Finish time time

Duration

Cost

Newry 16/10/2020 16/10/2020 Friday 09:30 12:30

Armagh 12/02/2021 12/02/2021 Friday 09:30 12:30

1 day

£30.00

Advanced Word Workshop This course is aimed at users who have at least 2 years of using MS Word. Participants will develop skills in:

• Using advanced editing and formatting features• Mail Merge• Creation of Automatic Table of Contents, Table of Figures and

Report Index• Managing Forms, Fields and Controls

Advanced PowerPoint This course is aimed at users who have at least 2 years’ experience of using MS PowerPoint. Participants will develop skills in:

• Working with Slide Master• Advanced Slide Animation• Collaborating your Presentation


Duration

Cost

Armagh 06/10/2020 13/10/2020 Friday 09:30 12:30

2 days

£30.00


Duration

Cost

Armagh 26/01/2021 02/02/2021 Friday 09:30 12:30

2 days

£30.00

Master Classes

6

Motor Vehicle Diagnostic Procedures and Equipment MasterclassThis masterclass is for people who want to learn vehicle diagnostic techniques and the equipment used in industry. This will cover:

• Electrical testing• Diagnostic Computers• Mechanical Diagnostics• Diagnostic Techniques

Motor Vehicle Diagnostics using Oscilloscopes MasterclassThis session is for people who want to develop their vehicle diagnostic skills by including oscilloscope testing. This will allow you to better test vehicle systems and more accurately and efficiently diagnose the cause of any faults. This is an excellent follow-on course from our Motor Vehicle Diagnostic Procedures

and Equipment Masterclass.

Motor Vehicle 12/24 volt Electrical Systems MasterclassThis masterclass is for people who would like to learn about vehicle 12v and 24v systems operate. This will cover

• Electric principles• Battery technology• Basic circuit design• Component testing

Master Classes


Duration

Cost

Portadown 22/01/2021 22/01/2021 Friday 09:00 17:00

1 day

£75.00


Duration

Cost


1 day

£75.00


Duration

Cost


1 day

£75.00


7

8

City & Guilds Level 3 NVQ Certificate and Diploma in Business and AdministrationThe City & Guilds Level 3 NVQ Certificate and Diploma in Business and Administration meet the needs of candidates already employed in or who wish to work in an administrative role with a high degree of autonomy. Students will develop their understanding of and skills in a broad range of administrative activities such as information management, event co-ordination and implementing procedures and systems.

SRC can design a programme to suit your business needs.

IAB Level 2 Certificate in Computerised Bookkeeping This course provides the knowledge and skills to set-up a computerised accounting system, prepare business documents, process a wide range of transactions from source documents and produce reconciliations and reports. The programme will enable you to use Sage software suitable for the production of business accounts. It uses the popular SAGE LINE 50 computerised accounts package. At level 2 the syllabus covers sales, purchases, bank reconciliation, VAT schemes & reports.

IAB Level 2 Certificate in PayrollThis course develops candidates’ skills and underpinning knowledge in the use of commercially available payroll software for preparing payroll records, progressing payroll and maintaining accurate information.

If your business does not qualify for Skills Focus funding or the training you require is not listed please contact us and we will endeavour to meet your needs at competitive prices.

Administration & Accountancy


Duration

Cost

Newry 24/09/2020 21/01/2021 Thursday 19:00 21:00

Portadown 23/09/2020 20/01/2021 Wednesday 19:00 21:00

Armagh 11/02/2021 10/06/2021 Thursday 18:30 21:45

Newry 23/09/2020 28/04/2021 Wednesday 19:00 21:00

Newry 09/02/2021 08/06/2021 Tuesday 18:30 21:45


15 weeks

*fully funded


Duration

Cost

Newry 22/09/2020 26/01/2021 Tuesday 19:00 21:00

Newry 11/02/2021 17/06/2021 Thursday 19:00 21:00

Portadown 28/09/2020 01/02/2021 Monday 19:00 21:00

Portadown 11/02/2021 17/06/2021 Thursday 19:00 21:00


16 weeks

*fully funded


9

Automotive L3 Award in Electric/Hybrid Vehicle System Repair and ReplacementIndividuals interested in taking this course will need to possess appropriate vehicle maintenance and repair knowledge and skills at level 3 and have completed Level 2 Award in Electric/Hybrid Electric Vehicle Routine Maintenance Activities.

The content of this qualification has been designed to give the learners the knowledge and skills required to work safely on Electric/Hybrid vehicles whilst carrying out diagnostic, testing and repair activities. This may include vehicles that may have or had damage to their high energy/electrical system.

If progression from L2, it contains one mandatory unit covering knowledge and skills of:

• working safely on an electric/hybrid vehicle• using information to carry out the task• carrying out repairs on high energy electrical systems• recording information and making suitable recommendations

IMI Level 2 Award in Electric/Hybrid Vehicle Routine Maintenance ActivitiesIndividuals interested in taking this course will need to possess appropriate vehicle maintenance and repair knowledge and skills at level 2.

The content of this qualification has been designed to give the learners the knowledge and skills required to work safely on Electric/Hybrid vehicles whilst carrying out routine maintenance and repair activities (not voltage components or systems). This may include vehicles that may have or had damage to their high energy/electrical system.

It contains one mandatory unit covering knowledge and skill of:

• electric/hybrid vehicle system components and operation• hazards surrounding electric/hybrid vehicles• how to reduce the risks to yourself and others when working

on electric/hybrid vehicles• safely preparing the vehicle when carrying routine

maintenance (NOT high voltage components or systems)• working safely on an electric/hybrid vehicle (NOT high

voltage components or systems)


Duration

Cost

Armagh 08/03/2021 12/03/2021 Mon – Fri 09:00 17:00

5 days Monday – Friday

*fully funded


Duration

Cost

Armagh 12/11/2020 13/11/2020 Thurs & Fri 09:00 17:00

Portadown 26/11/2020 27/11/2020 Thurs & Fri 09:00 17:00

Armagh 14/01/2021 15/01/2021 Thurs & Fri 09:00 17:00

Portadown 18/02/2021 19/02/2021 Thurs & Fri 09:00 17:00

2 days

*fully funded


10

Automotive IMI Level 3 Award in Automotive Refrigerant Handling (EC842-2006) (VRQ)This Defra-approved qualification offers a single unit solution that provides experienced automotive Mobile Air Conditioning (MAC) technicians with evidence that they meet the minimum F-gas requirement (EC842/2006 and annex EC307/2008).

This course is for technicians who have a minimum of a Level 2 vocationally related qualification or extensive industrial experience.



Duration

Cost

Armagh 09/12/2020 11/12/2020 Wed-Fri 09:00 17:00

Portadown 17/02/2021 19/02/2021 Wed-Fri 09:00 17:00

3 day course Wednesday – Friday

*fully funded


11

Clinical & Beauty City & Guilds Level 4 Award in Laser & Light for Hair Removal (QCF)This unit is about the skills and knowledge required for laser and light treatments for hair removal. It includes both the preparation and the provision of the treatment.

There are two learning outcomes to this unit. The learner will:

1. be able to prepare for laser and light treatments

2. be able to provide laser and light treatments for hair removal

City & Guilds Level 4 Award in Laser & Light Treatment for Skin Rejuvenation (QCF)This unit is about the skills and knowledge required for carrying out laser and light treatments for skin rejuvenation.

There are two learning outcomes to this unit. The learner will:

1. be able to prepare for skin rejuvenation treatment

2. be able to provide laser and light treatment for skin rejuvenation


Duration

Cost

Lurgan 14/09/2020 18/01/2021 Monday 17:30 20:30

15 weeks

*fully funded


Duration

Cost

Lurgan 25/01/2021 07/06/2021 Monday 17:30 20:30

15 weeks

*fully funded

Other Short Beauty Courses Available:Hot Towel Shaving

4 hrs £30.00

Hair Shaving Designs

4 hrs £30.00

Colour Correction

8 hrs £60.00

Micro Dermabrasion

8 hrs £60.00

Henna Brows

4 hrs £30.00

Lash Lift

4 hrs £30.00

Spray Tan

4 hrs £30.00

Learn the techniques and skill to use the traditional cut throat razorLearn the techniques and skill to use the traditional cut throat razor

Learn how to design shape and create patterns in hairLearn how to design shape and create patterns in hair

Learn hair colour correction skills and techniques.

Learn to renew the overall skin tone & texture approving appearance of fine lines, wrinkles, sun damage & acne scarring.

Learn how to create an illusion of depth & fullness to the brows without the use of hydrogen peroxide – last 6/7 weeks on brow hairs.

Learn how to Lift, shape & curl your lashes from base to tip using a chemical solution.

Learn a form of self tanning (sunless tanning) where a fine mist is sprayed onto the bod.

12

Clinical & Beauty Other Short Beauty Courses Available:

HD Brows

8 hrs £60.00

Brow Lamination

4 hrs £30.00

Ear Candling

4 hrs £30.00Learn this traditional skilled method of hair removal which involves thread to precisely remove hairs.

Learn a bespoke eyebrow treatment that involves waxing, threading, tweezing and tinting to achieve a ‘high definition’ brow.

Learn the process of re-shaping and re-aligning eyebrows.

Learn the ancient and therapeutic techniques of Ear Candling.

Learn how to perfect gel polish nail treatments.

Learn effective Indian Head Massage Techniques.

Gel Polish

4 hrs £30.00

Indian Head Massage

8 hrs £60.00

Threading

8 hrs £60.00


13

ChildcareCity & Guilds Level 5 Diploma in Leadership for Children’s Care, Learning & Development (Management) (Wales & Northern Ireland)This course aims to provide you with the skills and knowledge needed to manage a practice and lead others. This course is for senior practitioners in a leadership and management role who work within early years and childcare settings including day nurseries, crèches, and playgroups and after school settings.

Unit - L3 Understanding how to support individuals with autistic spectrum Level 3This unit provides a range of knowledge and understanding about autistic spectrum conditions and explores theories and concepts about autism. It enables learners to reflect on the impact of these conditions on the lives of individuals and those close to them and to learn about good practice in areas such as communication and support.

Unit - L3 Working with Children & Young People with Special Needs (OCN)This qualification is ideal if you are working with or planning to work children and young people with special needs. This unit will provide you with an understanding of the concept of special needs and current attitudes and values.



Duration

Cost

Banbridge 15/09/2020 07/06/2021 Tuesday 18:30 21:45

Newry 17/09/2020 09/06/2021 Thursday

32 weeks

*fully funded This is 2 year programme Year 1 will be fully funded. Year 2 will incur a 25% employer cost of £368.00 per candidate


Duration

Cost

Banbridge 04/02/2021 29/04/2021 Thursday 18:30 21:45

10 weeks

*fully funded


Duration

Cost

Newry 01/02/2021 05/05/2021 Wednesday 18:00 21:00

10 weeks

*fully funded


14

Construction TradesCSkills Awards Level 3 NVQ Diploma in Stonemasonry (Construction)The Stone Fixer or Banker Mason qualification has been developed for delivery in a working environment meaning you need to be employed to complete this qualification. It is a progression route for those who have completed the level 3 Heritage Skills NVQ.

This course provides the opportunity for individuals who specialise in stone fixing, stone cutting, dressing or carving to demonstrate their competence. Duration 30 weeks.

CSkills Awards Level 3 NVQ Diploma in Heritage Skills (Construction) (QCF) The aim of this qualification is to recognise the knowledge, skills and competence demonstrated by an individual in the workplace. This Level 3 NVQ Diploma in Heritage Skills provides the opportunity for individuals who specialise in masonry to achieve a relevant qualification to recognise their knowledge, skills and understanding in the heritage sector.



Duration

Cost

Banbridge 21/09/2020 19/04/2021 Monday 18:30 21:30

25 weeks

*fully funded


15

OCN NI Level 4 Certificate in Collaboration in Building Information, Modelling/ManagementThe OCN NI Level 4 Certificate in Collaboration in Building Information Modelling/Management qualification has been designed to provide the learner with the knowledge and skills to work collaboratively with others on building information models. In addition, the learner will gain knowledge and skills relating to information management.

OCN Level 4 3D Building Modelling using RevitThis unit will enable the learner to understand the basic principles of 3D Building Information Modelling with the authoring software Revit.

• Understand what is meant by BIM

• Understand and be able to use modelling interface.

• Be able to create a three dimensional (3D) model.

• Be able to create a two dimensional (2D) drafting views

• Understand sheet compilation and publication.

Building Information Modelling: Basic’s for Front end UsersThe course is designed to give site managers/foremen a basic introduction to BIM and the use of BIM on construction sites. Areas covered in the course will include

• What is BIM

• How to view and interrogate models

• Use of field viewers

• How to use a Common Data Environment on site.

• How to operate workflows with Status and Revision Codes

• What is a Project Information Model

• How to comply with Naming Conventions

• How to read MIDPs and TIDPs.

• How to utilize a construction sequence using a model

• How to set out on site using Models and Total Stations

• How to capture COBie information

• How to integrate O&M Manuals with an AIM



Duration

Cost

Newry 29/09/2020 01/06/2021 Tuesday 18:00 21:00

30 weeks

*fully funded

Digital Construction


Duration

Cost

Newry 01/10/2020 01/01/2021 Thursday 18:00 21:00

Newry 28/01/2021 06/05/2021 Thursday 18:00 21:00

12 weeks

*fully funded


Duration

Cost

Newry 24/09/2020 22/10/2020 Thursday 18:00 21:00

Newry 04/02/2021 04/03/2021 Thursday 18:00 21:00

5 weeks

£138.00

16

OCN NI Level 2 Award in Social Media (QCF)The OCN NI Social Media Qualification (QCF) is designed to give learners the opportunity to explore how social media can be used to create good content, interact across a variety of platforms and engage with individuals and groups to drive up sales. This course will provide learners with the practical confidence and knowledge to create content using a variety of social medial platforms including Facebook, Twitter, Instagram, Snapchat, LinkedIn and You Tube as well as making them aware of the positive and negative aspects of using social media and the importance of reputation management.

OCR Unit Level 3 Audio Visual Media Skills By completing this unit learners will understand audio-visual promos. Learners will be able to generate ideas and produce pre-production material for an audio-visual promo. Learners will also gain some practical skills by producing and editing the planned audio-visual promo.

OCR Unit - Level 2 Audio Visual Media Skills - Video ProductionThis user friendly video making course will allow you to produce short videos to export to social media platforms for the promotion of your business. Candidates can progress to a level 3 unit.

Unit-Level 2 Adobe Certified Associate-DREAMWEAVER Adobe Level 2 Unit (Blended)Adobe Certified Associate (ACA) certification demonstrates proficiency in Adobe’s digital communication tools i.e. Creative Cloud (CC) software. ACA is a prerequisite qualification to succeed in the high demand areas of digital communication and media. It provides students and job-seekers with a valuable competitive edge.

ACA Exam Packs make it very affordable for academic institutions to offer ACA training and certification. Certiport’s internet-based testing software makes ACA exams easy to deliver and delivers robust, internationally standardised assessment of each student’s performance.


Duration

Cost

Newry 21/09/2020 30/11/2020 Monday 18:30 21:45

Armagh 11/01/2021 22/03/2020 Monday 18:30 21:45

10 weeks

*fully funded


Duration

Cost

Banbridge 04/11/2020 20/01/2021 Wednesday 18:00 21:00


10 weeks

*fully funded


Duration

Cost

Newry 22/09/2020 19/01/2021 Tuesday 19:00 21:00


Armagh 22/09/2020 19/01/2021 Tuesday 19:00 21:00

15 weeks

*fully funded


Duration

Cost


20 weeks

*fully funded

Digital Skills

17

Unit-Level 2 Adobe Certified Associate-InDESIGN Adobe Level 2 Unit (Blended)Adobe conducted research to identify the foundational skills students need to effectively communicate using digital media tools. Based on feedback from educators, design professionals, businesses, and educational institutions around the world, the objectives cover entry-level skill expectations for print and digital media publishing.

Unit-Level 2 Adobe Certified Associate-PHOTOSHOP Adobe Level 2 Unit (Blended)Adobe conducted research to identify the foundational skills students need to effectively communicate using digital media tools. Based on feedback from educators, design professionals, businesses, and educational institutions around the world, the objectives cover entry-level skill expectations for visual design.

Microsoft Technology Associate (MTA) SECURITY FUNDAMENTALS Level 2 Unit (Blended)This exam validates that a candidate has fundamental security knowledge and skills. It can serve as a stepping stone to the Microsoft Certified Solutions Associate (MCSA) exams. It is recommended that candidates become familiar with the concepts and the technologies and will gain hands-on experience with Windows Server, Windows-based networking, Active Directory, anti-malware products, firewalls, network topologies and devices, and network ports.


Duration

Cost

Armagh 24/09/2020 21/01/2021 Thursday 19:00 21:00

Newry 24/09/2020 21/01/2021 Thursday 19:00 21:00


15 weeks

*fully funded


Duration

Cost

Armagh 23/09/2020 20/01/2020 Wednesday 19:00 21;00

Newry 23/09/2020 20/01/2020 Wednesday 19:00 21:00


15 weeks

*fully funded

Digital Skills


Duration

Cost

Newry 24/09/2020 21/01/2021 Thursday 19:00 21:00

Armagh 24/09/2020 21/01/2021 Thursday 19:00 21:00


15 weeks

*fully funded


18

Level 2 Introduction To Cyber Security This introduction to cyber security course covers three main areas:

1) Be aware of physical and virtual risks to security of information and strategies to prevent this occurring

2) Be able to install and update protection software and passwords to minimise unauthorised access

3) Be able to protect data on devices vulnerable to unauthorised access

ECDL Level 1 Database Software (Blended)Enter, edit and organise structured information in a database.

ECDL Level 1 Project Management Software (Blended)The learner will create and define a project Enter and edit information about project tasks and resources

Digital Skills


Duration

Cost

Armagh 21/09/2020 02/11/2020 Monday 19:00 21:00


Armagh 23/09/2020 04/11/2020 Wednesday 19:00 21:00

Armagh 12/04/2021 24/05/2021 Monday 19:00 21:00



6 weeks

*fully funded


Duration

Cost

Banbridge 11/01/2021 22/02/2021 Monday 09:30 11;30


Newry 13/01/2021 24/02/2021 Wednesday 09:30 11:30


6 weeks

£55.00


Duration

Cost

Portadown 12/01/2021 23/02/2021 Tuesday 09:30 11:30


Newry 14/01/2021 25/02/2021 Thursday 09:30 11:30

Armagh 14/01/2021 25/02/2021 Thursday 09:30 11:30

6 weeks

£55.00


19

ECDL Level 2 Database Software (Blended)Create and modify nonrelational database tables

ECDL Level 2 Project management software (Blended)Create and define a projectEnter and edit information about project tasks and resourcesUpdate information about project progressSelect and use appropriate tools and techniques to display and report on project status

Digital Skills


Duration

Cost

Banbridge 01/03/2021 19/04/2021 Monday 09:30 12:30


Newry 03/03/2021 21/04/2021 Wednesday 09:30 12:30


6 weeks

Fully Funded


Duration

Cost



Newry 04/03/2021 22/04/2021 Thursday 09:30 12:30

Armagh 04/03/2021 22/04/2021 Thursday 09:30 12:30

6 weeks

*fully funded

20

Excel Basic This course is aimed at the complete novice or a user that has limited experience of using Excel. The course demonstrates how Excel can be used to improve productivity and is a time saving tool for manipulating numeric or statistical data. The course will provide practical experience of:

Creating and managing workbooks

1. Manage data cells and ranges

2. Perform operations with formulas and functions

3. Create Charts and Objects.

Excel IntermediateThis course is aimed at a user who has been using Excel for up to a year and who wants to develop their existing skills further. The course demonstrates how Excel can be used to improve productivity and is a time saving tool for manipulating numeric or statistical data. The course will provide practical experience of:

1. Creating Tables

2. Complex Functions and Formula

3. Customising Worksheets E.g. Protection, Freezing panes, Filtering, Conditional Formatting

4. Relative, Absolute and Mixed Cell references.

Excel For Business


Duration

Cost

Newry 09/09/2020 16/09/2020 Wednesday 09:30 12:30


2 days

£75.00


Duration

Cost

Newry 07/10/2020 14/10/2020 Wednesday 09:30 12:30


2 days

£75.00

21

Excel AdvancedThis course is aimed at a user who probably has a lot of experience using Excel but needs further training in advanced features. The course demonstrates how Excel can be used to improve productivity and is a time saving tool for manipulating numeric or statistical data. The course will provide practical experience of:

1. Pivot Tables

2. Goal Seek/What If scenarios

3. Handling Large Spreadsheets

Excel SpecialistThis course is aimed at a user who probably has a lot of experience using Excel but needs further training in advanced features. The course demonstrates how Excel can be used to improve productivity and is a time saving tool for manipulating numeric or statistical data. The course will provide practical experience of:

1. Working with the Developer Tab

2. VBA Programming/Macros

Excel For Business


Duration

Cost

Newry 11/11/2020 18/11/2020 Wednesday 09:30 12:30


2 days

£75.00


Duration

Cost

Newry 09/12/2020 16/12/2020 Wednesday 09:30 12:30


2 weeks

£75.00


22

Level 4 Award in the Design and Verification of Electrical Installations 2396 This City and Guilds qualification helps to develop the essential, up-to-date knowledge and techniques needed to professionally design and install or inspect and test electrical systems.

This award is ideal for qualified electricians wishing to expand or update their professional knowledge and skills. Level 4 is ideal if you are an experienced electrician, working with minimal or no supervision. You are looking to develop or update your electrical installation and verification knowledge and technique.

This qualification demonstrates the specialist knowledge and skills you need, including, designing and installing electrical systems, appropriate legislation and verifying installations. Assessment will be through an assignment and a written exam.

It is recommended that those wishing to enrol for this course have passed the 18th Edition Wiring Regulations and the 2391-52 Inspection and Testing course.

City & Guilds Level 3 Award in Initial & Periodic Inspection & Testing of Electrical Installations This qualification is intended for practicing electricians who want to expand their skills and knowledge in the area of Initial Verification and Periodic Inspection and continue their professional development.

Electrical/Gas


Duration

Cost

Armagh 22/09/2020 23/03/2021 Tuesday 18.00 21.30

22 weeks

*fully funded


Duration

Cost

Newry 28/09/2020 01/02/2021 Monday 18:00 21:00

16 weeks

*fully funded


City & Guilds Level 3 Award in the requirements for electrical installations BS 7671 (18th Edition)All commercial, domestic and industrial wiring installations must be designed, constructed, inspected, tested and certificated to meet the requirements of BS 7671: 2018.

Core Domestic Natural Gas Safety and Appliances Level 3 Certificate PT-G The CCN1 initial training and assessment course is for gas installers undertaking their ACS qualifications for the first time or renewing certificates which have expired more the 12 months previously.

Any candidate wishing to undertake the ACS assessments will need to demonstrate they have undertaken a recognised training programme and have a supporting portfolio of onsite work experience with a registered gas engineer.

Electrical/Gas


Duration

Cost

Newry 30/09/2020 25/11/2020 Wednesday 18:00 22:00


8 weeks

£415.00


Duration

Cost

Greenbank 18/01/2021 22/01/2021 Mon - Fri 09:00 17;00

Greenbank 19/04/2021 23/04/2021 Mon – Fri 09:00 17:00

5 day course Monday – Friday

*fully funded

“It is our great pleasure to recommend SRC to all local employers and potential students in our area. We have been working with SRC for many years to keep our employees and managers upskilled through the SRC Business Support & Innovation Centre. In the past 12 months Braham Electrical and SRC have worked together to provide our staff with the current regulations in the electrical industry. With the support of SRC each employee has completed and passed the course enabling our company to go forward to bring fully approved up to standard electricians to our clients and customers’’

Braham Electrical- Skills Focus


23

24

Level 3 Unit Industrial Robotics This unit will give learners an understanding of the principles and operation of industrial robots used in modern manufacturing. The unit will cover robot control systems, the operating principles of different types of sensors used and their application in an industrial robot.

Pearson Level 3 Unit Computer Numerical Control This unit is designed to develop your skills in computer numerical control and includes machine preparation, loading programmes and simulating & proving programmes.

Programmable Logic Controllers Level 3 Unit EV-N This unit will give students an understanding of the use and application of programmable logic controllers (PLC’s), the hardware and software that makes up a PLC & the interaction needed between both components.

Edexcel Level 3 Unit Electro, Pneumatic & Hydraulic Systems & Devices BSU PT-T This unit covers a basic understanding of how fluid power systems are used to control the operation of machinery and equipment.

Engineering


Duration

Cost

Newry 19/01/2021 18/05/2021 Tuesday 15:00 17:00


15 weeks

£358.00


Duration

Cost

Newry 23/01/2021 25/05/2021 Monday 14:00 17:00


Portadown 22/09/2020 26/01/2021 Tuesday 18.45 22:00


16 weeks

£468.00


Duration

Cost

Newry 22/09/2020 26/01/2021 Tuesday 18:45 22:00


Newry 23/01/2020 25/05/2021 Monday 14:00 17:00


Newry 09/02/2021 15/06/2021 Tuesday 18:45 22:00

Portadown 09/02/2021 15/06/2021 Tuesday 18.45 22:00

16 weeks

£468.00


Duration

Cost

Newry 23/01/2021 25/05/2021 Monday 14:00 17:00


15 weeks

£468.00


25

Introduction to MIG Welding This is a basic course designed to introduction to basic MIG welding techniques and will cover the following:

• Set up/Shut down procedures

• Health and Safety Awareness

• System settings for all appropriate material types

• Basic welding techniques

• Metal prep of materials to be welded

• Completion and mastery of welded joints

Introduction to TIG WeldingThis is a basic course designed to introduction to basic TIG welding techniques and will cover the following:

• Set up/Shut down procedures

• Health and Safety Awareness

• System settings for all appropriate material types

• Basic welding techniques

• Metal prep of materials to be welded

• Completion and mastery of welded joints

Engineering


Duration

Cost

Portadown 25/09/2020 23/10/202 Friday 09;00 17:00

Armagh 11/01/2021 08/02/2021 Monday 09:00 17:00

5 weeks

£385.00


Duration

Cost


Armagh 22/02/2021 22/03/2021 Monday 09:00 17:00

5 weeks

£385.00


26

NEBOSH Level 3 Certificate in Occupation Health & Safety The NEBOSH National General Certificate is a qualification designed to help those with health and safety responsibilities (e.g. managers, supervisors and employee representatives) to discharge more effectively their organisational duties and functions. This course is suitable for Health and Safety officers, safety representatives, SME owners and managers, Middle & Senior management with health and safety responsibilities.

IOSH Level 3 Managing Safely for Managers This course will provide candidates with the knowledge to manage health and safety activities and risk assessment of personnel, in compliance with organisational safety policies, the Health and Safety at Work (NI) Order and other relevant legislation.

Health & Safety


Duration

Cost


27 weeks

*fully funded


Duration

Cost

Newry 25/02/2021 18/03/2021 Thursday 09:30 16:30

4 weeks

*fully funded


27

Level 3 Manual Handling Training the Trainer (for the care sector)Course covers legislation, manual handling devices candidates, best practice, anatomy and physiology of the muscular skeletal systems. Candidates will develop competency in planning and presenting a teaching session. This course is for trainers in the care sector.

Level 1 Manual Handling Update (for the care sector)Update course for Train the Trainer full course covering the key principles including legislation and best practice in the care sector.

Health & Safety


Duration

Cost

Newry 06/11/2020 27/11/2020 Friday 09:30 16:30

Newry 15/04/2021 06/05/2021 Friday 09:30 16:30

4 weeks

£250.00


Duration

Cost

Newry 04/12/2020 04/12/2020 Friday 09.30 12:45

Newry 11/02/2021 11/02/2020 Thursday 09:30 12:45

Newry 13/05/2021 13/05/2021 Thursday 09:30 12:45

3 hours

£50.00


28

Health & Social Care


Duration

Cost


30 weeks

Fully Funded

This is 2 year programme Year 1 will be fully funded. Year 2 will incur a

25% employer cost of £436.00 per candidate


Duration

Cost

Newry 28/09/2020 14/06/2021 Monday TBC TBC

30 weeks

*fully funded

City & Guilds Level 5 Diploma in Leadership for Health and Social Care Services (Adults’ Management) (Wales & NI) (QCF) This course is designed to enhance the skills of managers and assistant managers in the health and social care sectors and prepare staff for more roles and responsibilities. You will be required to compile a portfolio of evidence. The qualification guides and assesses development of knowledge, understanding and skills in management practice within health and social care.

Requirements

The course is aimed at health and social care managers and assistant managers. Interested candidates will have an informal interview prior to commencing course. It is the new benchmark qualification to be held by advisers to meet FSA Requirements.

Assessment is through a combination of exams, coursework and practical assessments.

City & Guilds Level 3 Diploma in Health & Social Care (Adults) for Wales and Northern Ireland This course provides a sector wide recognised qualification for working in health and social care as senior care workers, or other roles with similar responsibilities. It covers the skills and knowledge required to care for others in a wide range of health and social care settings.

‘Ann’s Home Care rely on the training provided by SRC to upskill our staff and provide them with the knowledge that they require to equip them in this challenging but rewarding field of work. We wholeheartedly recommend Southern Regional College for the support they provide to employers and for their professionalism and innovation’

Ann’s Home Care


29

Health & Social CareCity & Guilds Level 2 Diploma in Health & Social Care (Adults) for Wales and Northern Ireland This course is the recognised qualification for those who want to work in the health and social care sector as care workers in nursing homes, residential or domiciliary care settings. You may already be employed in the care sector and need to achieve this qualification.

SRC can organise an onsite bespoke course to suit your business needs.

Range of Bespoke First Aid/Health & Safety Courses for Continuous Professional Development in the Care SectorContact Business Support & Innovation to discuss hours and costs, as content can be tailored to your business needs.

• Manual Handling Awareness for Care Workers• COSHH & Infection Control• Safe Handling of Medications• Report Writing & Confidentiality• Safeguarding• Handling complaints • Managing Challenging Behaviour • Level 3 Emergency First Aid (6 hours)• Level 3 Award First Aid at Work (18 hours)• Level 3 Paediatric First Aid (16 hours)


30

Hospitality Professional Restaurant Ready Do you want to upskill existing staff and recruit and retain new staff? This programme has been designed for existing employees within a business who wish to gain Industry recognised qualifications in their field. We have grouped all desirable entry level qualifications for the Hospitality Industry together as a complete package.

Package:

• City & Guilds Level 2 Cert in Professional food and beverage service skills

• City & Guilds Level 2 Award in Barista Skills• RSPH Level 2 Award in Food Safety & Hygiene• RSPH Level 2 Award in Identifying & Controlling Food Allergy

Risks• ICQ Level 2 Award in Understanding Customer Service


Duration

Cost

Newry 29/09/2020 08/06/2021 Tuesday 13:15 21:30

30 weeks

£63.00

“The content was business focused. Candidates enjoyed the restaurant service aspect and working in a high end food service environment. They look forward to the opportunity to progress to a Level 3 qualification in hospitality”

Quinn’s Bar, Newcastle

31

This Level 3 qualification is designed principally for those who are, or intend to be, supervisors of food handlers within the catering and hospitality industry. Holders will gain a broad knowledge of food safety and food hygiene, enabling them to identify problem areas and recommend solutions.

RSPH Level 2 Award in Food Safety & HygieneThis course covers the basic principles of food hygiene for caterers and other food handlers to ensure they are preparing or serving food which is safe to eat in line with Environmental Health and legislative guidelines.


Duration

Cost

Newry 28/09/2020 19/10/2020 Monday 09:30 16:30


4 days or 8 evening

*fully funded

Duration

Cost

8 hours

*fully funded


Newry 21/09/2020 28/09/2020 Monday 17:30 21:45

Newry 02/11/2020 02/11/2020 Monday 09:15 18:15

Armagh 09/11/2020 09/11/2020 Monday 09:15 18:15

Newry 18/11/2020 25/11/2020 Wednesday 17:30 21:45


Armagh 01/02/2021 08/02/2021 Monday 17:30 21:45


Greenbank 12/04/2021 12/04/2021 Monday 09:15 18:15


Lurgan 11/05/2021 18/05/2021 Tuesday 17:30 21:45

RSPH Level 3 Award in Supervising Food Safety & Hygiene

Hospitality “Tutor was fantastic, made me feel very welcome and at ease, she is in the right job”

Friar Tucks

RSPH Level 2 Award in Allergens This qualification will provide learners with an understanding of why food allergens need to be controlled and strategies for control, such as keeping and making available information about allergen ingredients, reducing cross contamination, improving communication and providing advice to consumers.

SRC can organise an onsite bespoke course to suit your business needs. (8hr course, fully funded)

32

Level 2 Award in Principles of Customer Service/World Host What does it cover?

• Identifying customer needs and managing expectations• The importance of making a great first impression• Applying customer service within your role and sector• Communication skills to improve your customer interactions• Leaving a lasting impression• Planning for professional development

Benefits of the programme

• 1 day programme that is adaptable to multiple roles, sectors or industries

• Easy to contextualise • Planning • Participative and interactive with an applied focus on ‘active

learning’

Positive outcomes for your organisation

• Increased revenue, repaet business, average spends and net sales

• Increased staff motivation, and therefore reduced staff turnover and absenteeism

• Higher quality assurance ratings and improved scores on online review sites.

World Host customer service training is an interactive, engaging experience for staff covering real world situations.

Duration

Cost

10 Hours

*fully funded


Greenbank 04/11/2020 11/11/2020 Wednesday 09:30 15:30






“Convenient time for staff, staff members enthusiastic about the course delivery and content. Business cluster brought real life examples to classes”

The Oliver

Hospitality

33

Hospitality City & Guilds Level 2 Award in Barista Skills Do you like a cafe latte? Americano? Want to become a barista? With this qualification you’ll gain the knowledge and skills you need to prepare and serve hot and cold drinks in any environment.

SRC can organise an onsite bespoke course to suit your business needs. (30hrs course, fully funded.)

Bespoke Hospitality Industry Courses and Services

Offered by SRC:

• FDQ Level 2 Award for Proficiency in Food Industry Skills (Duration 65 hours)

• Food Safety Awareness training • Menu Development• Allergen awareness • Labelling advice• Recipe development

Contact Business Support & Innovation to discuss hours and costs as content can be tailored to your business needs.



34

Leadership & Management ILM Level 5 Diploma in Leadership & Management The course is delivered through tutor presentation, group discussions and group activities. The qualification is made up of a broad range of units covering skills in core areas of leadership and management. It is a professional qualification for practicing leaders/managers, or new leaders/managers, who want to gain a wider knowledge and understanding of core skills. The course will provide you with core management techniques, develop your ability to lead, motivate and inspire, benchmark your skills and help you raise your profile in your organisation. Students will be expected to complete 7 assignments. Staff currently delivering the course have experience in Leadership and Management roles across different sectors.

ILM Level 3 Award in Leadership and Management (QCF) The Level 3 Award in Leadership and Management aims to give practicing and potential first line managers the foundation for their formal development. The course is ideal for individuals who have management responsibilities but no formal training, and those who wish to develop their abilities. It particularly supports practising team leaders seeking to move up to the next level of management, and managers who need to lead people through organisational change and other pressures.


Duration

Cost

Newry 14/09/2020 06/06/2021 Monday 17:30 21:45


30

*fully fundedDuration

Cost

30

*fully funded


Armagh 06/10/2020 15/12/2020 Tuesday 09:30 12:30



Newry 08/10/2020 07/01/2021 Thursday 18:30 21:45


Newry 25/02/2021 13/05/2021 Thursday 09:30 12:30

Armagh 13/04/2020 25/05/2020 Tuesday 18:30 21:45

35

Leadership & Management ILM Level 3 Certificate in Leadership & Management This qualification is ideal if you have management responsibilities but no formal management training and wish to develop your skills and knowledge. It’s particularly suited to practising team leaders seeking to move up to the next level of management, and managers who need to lead people through organisational change.

You will gain a range of key management skills and apply them to your own role as well as developing your leadership capabilities.

ILM Level 2 Award in Leadership and Team Skills ILM Level 2 Certificate in Leadership and Team Skills is ideal for practicing team leaders, helping them become more effective and confident in their role. This level will help candidates to learn core leadership and management skills and also support new or aspiring team leaders, helping them make the transition from working in a team to leading a team.

SRC can organise an onsite bespoke course to suit your business needs. (30hrs course, fully funded)

ILM Level 3 Train the Trainer Endorsed Unit Learning Outcomes: (the learner will)

• be aware of own current presentational skills and competences;

• know and understand different presentational techniques• be able to employ some of the principles of best practice

presentational skills; and• be able to demonstrate presentational skills in a training

session


Duration

Cost

Newry 25/01/2021 22/03/2021 Monday 09:30 12:30

8 weeks

*fully funded


Duration

Cost

Armagh 06/10/2020 23/03/2021 Tuesday 18:30 21:45


Newry 08/10/2020 25/03/2021 Thursday 18:30 21:45

20 weeks

*fully funded‘’This Course was great, our Trainer Fola was excellent. This Course helped us understand our own personal learning styles, among other styles that are used to train. We were taught different training methods and how to keep the attention of Training alongside the importance of teaching plans and how to prepare our Training, in and outside the Training Room. For our PowerPoint Presentation assessment Fola was there to help us also on a one to one session, and gave each of us the confidence to present our Courses to the rest of the group and to the CEO. I would highly recommend this course, it is suitable for all levels with the business, Our course was made up of Management, Supervisors and Port Operators who all worked together and showed true teamwork with the Authority’’

“Great management tool that can be shared with others in the workplace”

Warrenpoint Harbour Authority

36

Leadership & Management Level 3 CIPD The CIPD Level 3 Foundation Diploma in Human Resource Practice is an internationally recognised qualification which is relevant and applicable both to those new to the field and existing HR professionals operating in all sectors and organisations.



Duration

Cost

Newry 23/09/2020 02/06/2021 Wednesday 17:30 21:45

Portadown 23/09/2020 02/06/2021 Wednesday 17:30 21: 45

30 weeks

*fully funded


SciencePearson Edexcel Level 3 NVQ Diploma in Laboratory and Associated Technical Activities (QCF) The Level 3 Diploma in Laboratory and Associated Technical Activities provides recognition of the skills and knowledge of individuals who work in a laboratory. It covers health and safety; effective working relationships; dealing with laboratory specimens/samples and communicating information. This work-based qualification is aimed at learners who are working, or want to work, in a laboratory. It could lead to employment as an analytical scientist, biochemist, biomedical scientist, biologist, biotechnologist, clinical scientist, microbiologist, physicist, laboratory technician or laboratory assistant.


Duration

Cost

Newry 29/09/2020 11/05/2021 Monday 09.15 16.15

27 weeks

*fully funded



37

39

Business Support We have a dedicated team who will work with you to identify your training needs and find the appropriate solution (which may also be eligible for funding). SRC can also deliver bespoke courses, tailored to your organisation’s specific requirements. If the dates and times of the courses above do not suit your business, we may be able to set up additional courses to suit your needs. For any of your training needs please do not hesitate to contact us today.

Other Support Available The Business Support and Innovation centre at SRC also supports local business and industry with new ideas and developments to help take their business to the next level. We have a team of industry specialists who work exclusively with businesses across a wide range of industry sectors who can work with you to explore your ideas and help make them a reality. They offer technical mentoring and R&D support to help develop new product/service ideas or to enhance existing products, services and processes. Innovation is not the preserve of science and technology businesses – all businesses have the potential to innovate. SRC has a number of support programmes available to help your business to innovate, most of which are partially or fully funded.

InnovateUs The InnovateUs Programme is designed to deliver one-to-one bespoke mentoring support relating to a new development in your business, regardless of what stage that development is at. Support can be delivered over 30 or 60 hours (dependent on need) and is 100% funded by the Department for the Economy.

Typical projects include product/service design and development or process improvement. Projects that fall within the following areas will be supported under this programme:

• Business Services (specifically ICT)• Financial Services• Manufacturing (including food/drink/agri-food, advanced

manufacturing and advanced engineering)• Hotels/Catering (in support of Tourism)• Retail• Life and Health Sciences• Creative Industries & Digital Media

Your business must have less than 50 employees and be trading in Northern Ireland in order to be eligible.

Andrea KearneyE: [email protected]: 028 3025 9675

Margaret McNameeE: [email protected]: 028 3839 7860

40

Innovation VoucherWhat could a £5000 Innovation Voucher do for your Business?

Do you have an idea for a new product, service or process? Do you need help to carry out research or do you need support for product design or prototyping?

Our Innovation Specialists at Southern Regional College can partner with you to explore and develop your new idea. You can apply for a voucher up to the value of £5000 – funded through Invest NI’s Innovation Voucher scheme - which will buy you over 60 hours of our experts’ time. This partnership will bring new knowledge to your business to help it innovate, develop and grow.

FUSIONThe Fusion programme involves a three-way partnership between a company with a development need, a graduate who can deliver the solution and an academic who can offer additional expertise to support the project.

Fusion supports strategic development within companies where there is a technology / product development focus, enabling companies to tap into the expertise available within Colleges. The company and academic institution must reside on either side of the Irish border.

Funding is provided by InterTradeIreland and typical programme duration is 12-18 months.

Knowledge Transfer Partnership (KTP)Knowledge Transfer Partnerships (KTP) is a UK-wide programme that has been helping businesses for the past 40 years to improve their competitiveness and productivity through the better use of knowledge, technology and skills that reside within the UK Knowledge Base.

A KTP serves to meet a core strategic need and to identify innovative solutions to help that business grow. The project involves a partnership between a company, a graduate and a college/university. The KTP often delivers significant increased profitability for business partners as a direct result of the partnership through improved quality and operations, increased sales and access to new markets. The graduate will be employed to deliver the project for the company with ongoing support from an experienced academic. KTP is part funded by InnovateUk and Invest NI.

If you have an idea or concept that could potentially help your business to grow and if you need support to take that concept further, then contact the Business Support and Innovation Centre at SRC on 028 3025 9664 or email [email protected]. The local team of experts can discuss your ideas with you and explore the potential for support.

41

Innovation Team

Laura WallsBusiness Development Executive T: 075 8777 0221 E: [email protected]

Darren Haughey Engineering Specialist T: 077 67 167165 E: [email protected]

Kieran SwailTourism SpecialistT: 077 33463146 E: [email protected]

Emma Lyttle Food SpecialistT: 075 01 493979E: [email protected]

Brenda KelleghanFood SpecialistT: 079 77 159439 E: [email protected]

Brian McGeeIT Specialist T: 078 94 594780 E: [email protected]

James DonnellyEngineering SpecialistT: 078 4146 9512 E: [email protected]

42

Apprenticeships Apprenticeships are available for both existing staff who are moving into a new job role and newly recruited employees/apprentices and are delivered through the ApprenticeshipsNI programme. Apprentices can be aged 16-24 years of age (over 25 years of age apprenticeships are available in priority skills areas) and are employed from Day 1 for a minimum of 21 hours per week (which includes directed training time) with an employer that has its base in Northern Ireland. We offer Apprenticeships in a wide range of areas and are currently developing a new Engineering Technician Apprenticeship. To explore how Apprenticeships can work for your business and/or notify SRC of an Apprenticeship position within your business, please contact Sylvia Moorhead.

Higher Level ApprenticeshipsThe aim of HLAs are to equip young people with both the theoretical knowledge through the qualification and relevant work experience to be effective in any company. Currently, SRC offers HLA in:

• Accountancy• Digital Marketing, Advertising and Communications• Hospitality & Tourism with Specialisms• Mechatronics• Digital Construction• Computing• Applied Industrial Science (both Chemical and Life Science

pathways)

HLAs enable employers to “grow their own” by developing a pipeline of motivated, skilled, qualified and professional staff.

For more information on the below HLA’s please contact Michelle Billham:

• Mechatronics• Digital Construction• Computing• Applied Industrial Science (both Chemical and Life Science

pathways)

For the below HLA’s please contact Sylvia Moorhead:

• Digital Marketing, Advertising and Communication• Accountancy• Hospitality & Tourism with Specialisms

Michelle Billham E: [email protected] T: 028 3025 9664

Sylvia Moorhead E: [email protected] T: 028 3025 9664

SRC Portadown Campus36 Lurgan Road PortadownCo. ArmaghBT63 5BL

T: 028 3839 7778

SRC Newry CampusGreenbank BuildingGreenbank Industrial EstBallinacraig Way, NewryCo. DownBT34 2QX

T: 028 3025 9664

Contact Us

2b

:cre

ativ

e 0

28

92

66

9 8

88

@southernregionalcollegeSouthernRegionalCollege srcchat

Great Careers Start Here

#

E: [email protected]

courses for industry 2020/21...• using videos for marketing purpose • using igtv facebook for...

Documents