c7h 8x4 curtainsider - uploads-ssl.webflow.com

EXTERNAL DIMENSIONS

Length (mm) 10225

Width (mm) 2496

Height (mm) (empty) 3560

Wheel base (mm) 5850

Track (mm)Front 2041

Rear 1870

Min. ground clearance (mm)

257

Approach angle (o) 15

Departure angle (o) 20

Front overhang (mm) 1540

Rear overhang (mm) 2200

0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton

C7H 8X4 CURTAINSIDER

FEATURES

The new Sinotruk C7H off ers you fl exibility with a high torque 540HP engine, drivelines and wheelbases in chassis confi gurations to meet your transportation requirements.

Leading safety features include a built in crumple zone, ABS and EBS

H Permit Glidemaster trailer and body built by Roadmaster paired with a Sinotruk C7H 8X4 with AMT transmission

A cost eff ective, reliable road freight solution

Mezzanine fl oor capable

Front Body Length= 7400mm, Trailer Length= 11500mm, Pallet capacity= 36



WEIGHTS

Cross weight of chassis (kg) 9800

Weight allocation of chassis (kg)

Front axle 2790/2890

Rear axle 2060/2060

GVM (kg) 31000

Max load of two axles (kg) Front 6500/6500

Rear 18000

GCM (kg) 55000

CAPABILITY

Max speed(km/h) 110

Min turning diameter (m) 22.4

Max climb gradient (%) 35

Fuel tank (L) 400

CABIN

Model U

Sits 2

Turing radius (mm) 2800

CLUTCH

Model CH430-25 diaphragm

Operation Mode Hydraulic with air

ENGINE

Model MC13.54-50

Displacement (L) 12.419

Power rating kW/(r/min) 397/1900

Max torque Nm/(r/min) 2500/1050-1350

TRANSMISSION

Model HW25712XA

Forward gear ratio 15.012, 11.667, 9.03, 7.146, 5.568, 4.375, 3.431, 2.667, 2.064, 1.633, 1.273, 1

Reverse gear ratio 13.811, 3.157

FRAME

Model Trapezium frame

Main beam cross-section (mm) 270×85×8

Width of frame Assembly (mm)

Front 940

Rear 762

STEERING GEAR

Model Ball circul

Ratio 22.2-26.2

Max pressure of pump (kPa) 18300

Steering way Recirculating ball power Steering

BRAKING SYSTEM

Working pressure (kPa) 1000

Drive braking type Dual circuitcompressed air brake

Brake power adjust type ABS/EBL/ASR

Parking brake type Spring stored energy air cut brake

Assistant brake type EVB

ELECTRICS

Circuit type double, controlpositive pole

Voltage (V) 24

Generator power (kW) 2.0

Accumulator voltage / capacity(V/Ah) 2x12/165

EXTRAS

Trailer brakes ABS to rear Included

Sunvisor, side skirts Included

Retarder VR115CT

SUSPENSION

Front Model Spring

Number 3 leaf parabolic

Rear Model Air

Number 8 air bags

DRIVING AXLE

Model MCY13 disc

Redactor ratio Ratio 3.08

Optional 3.36, 4.11, 2.85

Differential lock Diff lock + Cross lock

FRONT AXLE

Model HF7 (disc) 22’’



GLIDEMASTER TRUCK BODY

Body Length Overall 7400mm

Body Length Internal 7150mm

Width Overall 2490mm

Height Overall 4240mm

Decking 3mm C/10 steel decking. Pressed steel coaming rails, rope rails both sides with chain hooks

Roof One piece aluminium roof skins attached to aluminium Top-hats, steel RHS side rails with aluminium curtain tracks.

Front Bulkhead Pressed steel uprights, 7mm GRP outer front panels with plywood inner panels. Structurflex type 3 curtain tensioners with luff groove curtain poles.

Rear Bulkhead Pressed steel uprights and top header panel with 21mm Duopan rear wall. Structurflex type 3 curtain tensioners with luff groove curtain poles.

Roof Supports Two sliding roof support poles per side.

Curtains Single skin dry freight curtains with low stretch bottom straps attached to stainless steel buckles.

Mudguards Alloy pressed half guards complete with MTE mudflaps.

Drawbeam Certified drawbeam with mounts for duomatic and trailer sockets.

Ringfeder 50mm Ringfeder coupling fitted

Signage DG combination sign. (One on rear wall only)

Steps Tread plate step at the bottom of each rear pillar.

Outriggers Roof prop outriggers (Two pair)

Lighting LED lighting system

Lighting Front One front clearance lamp per side.

Lighting Rear Painted finish light bars, One Hella stop/tail and one indicator at bottom per side, Two reversing lights.

Lighting Sides Five lower and upper side marker lights, One lower side indicator.

5 AXLE GLIDEMASTER TRAILER

Body Length Overall 11500mm

Body Length Internal 11250mm

Width Overall 2490mm

Height Overall 4290mm

Axles 19.5 Disc braked axles, 8 stud, grease filled hubs. Mechanical hubometer fitted.

Suspension Airlight II air suspension

Brakes Wabco EBS braking system, coded to LTSA NZHVBC brake regulations.

Wheels 20 x 19.5” 8 stud, Weigh-cheetah alloy wheels.

Tyres 20 x Bridgestone 265/70R, 19.5 G540 tyres.

Dolly Fabricated G350 tandem axle dolly assembly fitted with a DK90/20 ballrace turntable. A certified “A” frame drawbar with a 50mm tow eye complete with a pig tail spring assembly.

Chassis Fabricated G350 I beam steel chassis rails, webs profile cut to accept pressed steel G350 cross members. Fabricated light weight I beam suspension cross members with integrated gusseting.

Decking 3mm C/10 steel decking fixed and sealed to crossmembers these are spaced at approximately 400mm centres. Pressed steel coaming rails, certified rope rails with chain hooks on every 2nd crossmember, this designed complies with NZS5444.

Roof One piece aluminium roof skins attached to aluminiumt op-hats, steel RHS side rails with alu-minium curtain tracks.

Front Bulkhead Pressed steel uprights, 7mm GRP outer front panels with plywood inner panels. Structurflex type 3 curtain tensioners and luff groove poles.

Rear Bulkhead Pressed steel uprights and top header panel with 21mm Duopan rear panel. Structurflex type 3 curtain tensioners with luff groove curtain poles.



5 AXLE GLIDEMASTER TRAILER

Roof Supports Three sliding roof support poles per side.

Curtains Single skin dry freight curtains with low stretch bottom straps attached to stainless steel buckles.

Equipment Alloy pressed half guards complete with Roadmaster mudflaps.

Rear Bumper Alloy infill panel with the BULL stamp in rear dock bumper.

Storage 2400x450x250mm alloy bearer carrier box with 2 x stainless steel lids.

Tie Downs Ferry tie downs.

Signage 1 x D/G Sign on rear of trailer only.

Steps Tread plate step at the bottom of each rear pillar.

Light Panels Stainless steel light panels at top and bottom of rear.

Scales Weight scales Knorr Timms module.

Electronics LED lighting system featuring, 7-core main wiring harness with a 7-pin coupling wired to the standard code.

Lights One front clearance lamp per side.

Lights Two Hella stop/tail and one indicator per side. (Bottom), One Hella stop/tail and one indicator per side. (Hi-level), Two reversing lights.

Lights Six lower and upper side marker lights. Per side, One lower side indicator.

c7h 8x4 curtainsider - uploads-ssl.webflow.com

Documents