a200 – 2” air operated double diaphragm pump · a200 – 2” air operated double diaphragm...

A200 2” PUMP

DiMension

Air inlet 3/4” (19mm)

Liquid inlet 2” (51mm)

Liquid outlet 2” (51mm)

Pump weight aluminium 62lbs (28kg)

Pump weight stainless steel 130lbs (59kg)

PerforMAnce

Max. flow 190 gpm (719 lpm)

Max. air pressure 120 psi (8.3 bar)

Max. solids 1/4” (6.4mm)

Max. suction lift dry 24 ft - H20 (7.3m - H20)

Max. suction lift dry with PTfe 19 ft - H20 (5.8m - H20)

Max. suction lift wet 32 ft - H20 (9.8m - H20)

noise level (without muffler) 76 dB (103 none)

2” sTAinLess sTeeL

� Ansi/Din flange, combination Ansi Din flange and nPT or combination Ansi/Din flange and BsP

� stainless steel hardware � non-metallic muffler � suction center front / discharge

center rear standard porting

2” ALUMiniUM

� nPT or BsP connections � Zinc plated hardware � non-metallic muffler � suction center front / discharge

center rear standard porting

A200 2” MoDeL DesiGnATion MATriX

ProDUcT series

fLUiD connecTion

TyPe

fLUiD cHAMBers/

MAnifoLDs

DiAPHrAGMVALVe/BALLVALVe seAT

o-rinGs

sPeciAL (oTHer)

inTerMeDiATe/

inner cHAMBer

sPeciAL (HArDwAre,

MUffLer)

sPeciAL

(PorTinG)

A 2 0 0 - 1 2 3 - 4 5 6 7 - 0 0 0

siZe

1

2

4

0

3

fLUiD connecTion TyPen = nPTB = BsPf = Ansi/Din flangec = combination Ansi / Din fLAnGe & nPTe = combination Ansi / Din fLAnGe & BsP

inTerMeDiATe / inner cHAMBerA = Aluminium

fLUiD cHAMBer / MAnifoLDsA = Aluminium3 = 316 stainless steel

5

DiAPHrAGMsn = Buna-ne = ePDMV = Viton®/fKMG = Geolast®

s = santoprene®

T = PTfe (overlay)

VALVe/BALLn = Buna-ne = ePDMV = Viton®/fKMG = Geolast®

3 = stainless steelT = PTfes = santoprene®

6

7

VALVe seATA = Aluminium3 = stainless steelP = Polypropyleney =nylon

o-rinGsn = Buna-ne = ePDMT = PTfeV = Viton®/fKM

sPeciAL oPTion000 = standard

stock Pump Models

2” ALUMiniUM

NPT Connection

A200-nAA-GGPn-000A200-nAA-ssPe-000A200-nAA-TTyT-000

BSP Connection

A200-BAA-GGPn-000A200-BAA-ssPe-000A200-BAA-TTyT-000

2” sTAinLess sTeeL

ANSI/DIN Flange Connection

A200-cA3-GG3n-000A200-cA3-ss3e-000A200-cA3-TT3T-000

DiAPHrAGMVALVe/BALLVALVe seAT

o-rinGs

A w e - 2 0 0 - 4 5 6 7

ProDUcT

series

weT enD

rePAir KiT

PUMP siZe

wet end repair Kit

wet end kit contains 2 diaphragms, (2 back-up diaphragms if required), 4 balls, 4 seats, and 4 seat o-rings.

inTerMeDiATe / inner cHAMBerA = Aluminium

MATeriAL

A A K - 2 0 0 - 2

ProDUcT

series

PUMP siZe

Air enD

rePAir KiT

Air end repair Kit

Air end repair kit contains pilot sleeve assembly and main air valve.

QUicK sHiP confiGUrATions

ships in All-flo standard Lead Time. Many additional pump configurations are available upon request. Lead time may vary depending on configuration. Please contact factory for more information.

A200 2” PerforMAnce cUrVes

Performance curve (2” rubber)*

PerforMAnce sPecificATions




Max. suction lift dry 24.4 ft - H2o (7.4m - H2o)

Max. suction lift wet 31.7 ft - H2o (9.7m - H2o)

weight AL - 62lbs (28kg) / ss - 130lbs (59kg)

Air inlet 3/4” nPT f

Liquid inlet 2” nPT f, 2” BsP f, or Ansi/Din flanged

Liquid outlet 2” nPT f, 2” BsP f, or Ansi/Din flanged

Height 26.3” (668mm) AL / 29.5” (749mm) ss

width 19.5” (495mm) AL / 19.1” (483mm) ss

Depth 13.5” (343mm) AL / 14.9” (378mm) ss










Height 26.3” (668mm) AL / 29.5” (749mm) ss

width 19.5” (495mm) AL / 19.1” (483mm) ss

Depth 13.5” (343mm) AL / 14.9” (378mm) ss



Max. solids 1/4” (6.4 mm)







Height 26.3” (668mm) AL / 29.5” (749mm) ss

width 19.5” (495mm) AL / 19.1” (483mm) ss

Depth 13.5” (343mm) AL / 14.9” (378mm) ss

Performance curve (2” TPe)*

Air consUMPTion (scfM)

Performance curve (2” PTfe)*


Aluminium stainless steel

*Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminium intermediate fitted pump. For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.


A200 – 2” Air Operated Double Diaphragm Pump

Every effort has been made to ensure all information and photographs contained in this publication were correct and accurate at time of printing, however no warranty is given in respect of this publication and JSG Industrial Systems Pty Ltd (JSG) shall not be liable for any error therein. Technical information, specifications and products shown may be subject to change without prior notice. Pictures shown are for illustration purposes only. WARNING: For sale and proper use consult instructions, the supplier or JSG. Contact your nearest JSG Distributor for latest information. © 2014 JSG Industrial Systems Pty Ltd., All rights reserved.

www.jsgindustrial.com Unit 1, 21 Amour St Revesby NSW 2212

PO Box 333 Milperra NSW 2214

Ph: (02) 9914 8720 Fax: (02) 9914 8798

Email: [email protected]

www.jsgindustrial.com

LubricationManagementsystems

MaterialDispensingManagementsystems

Hose & cableManagementsystems

Diesel & fluidManagementsystems

fireextinguisher& suppressionsystems

onboard weighing &ccTV systems

flow Measurementsystems

General Lubrication& exhaust extraction

A200 2” PUMP DiMensions inDUsTries

24.80”630mm

1.90” (48mm)

14.00”336mm

2.40”(61mm)

26.30”668mm

19.54” (496mm)

15.86” (403mm)

13.516” (343mm)

12.25” (311mm)

10.00” (254mm)

10.00”(254mm)

.70” (18mm)

9.00”(229mm)

14.00”(356mm)

2” FNPT or FBSP (x4)

3/4” FNPT

24.80”630mm

1.90” (48mm)

14.00”336mm

2.40”(61mm)

26.30”668mm

19.54” (496mm)

15.86” (403mm)

13.516” (343mm)

12.25” (311mm)

10.00” (254mm)

10.00”(254mm)

.70” (18mm)

9.00”(229mm)

14.00”(356mm)


3/4” FNPT

24.80”630mm

1.90” (48mm)

14.00”336mm

2.40”(61mm)

26.30”668mm

19.54” (496mm)

15.86” (403mm)

13.516” (343mm)

12.25” (311mm)

10.00” (254mm)

10.00”(254mm)

.70” (18mm)

9.00”(229mm)

14.00”(356mm)


3/4” FNPT

ALUMiniUM

3.49”(89mm)

16.06”(408mm)

26.54”(674mm)

29.54”(750mm)

19.09” (485mm)

4.60”(117mm)

3.90”(99mm)

16.06”(408mm)

15.86” (403mm)

13.52” (343mm)12.25” (311mm)10.00” (254mm)

12.80”(325mm)

.70” (18mm)

ANSI/DIN Flange (x2)

14.90”(378mm)

3/4” FNPT

3.49”(89mm)

16.06”(408mm)

26.54”(674mm)

29.54”(750mm)

19.09” (485mm)

4.60”(117mm)

3.90”(99mm)

16.06”(408mm)

15.86” (403mm)

13.52” (343mm)12.25” (311mm)10.00” (254mm)

12.80”(325mm)

.70” (18mm)


14.90”(378mm)

3/4” FNPT

3.49”(89mm)

16.06”(408mm)

26.54”(674mm)

29.54”(750mm)

19.09” (485mm)

4.60”(117mm)

3.90”(99mm)

16.06”(408mm)

15.86” (403mm)

13.52” (343mm)12.25” (311mm)10.00” (254mm)

12.80”(325mm)

.70” (18mm)


14.90”(378mm)

3/4” FNPT

sTAinLess sTeeL

A200 – 2” Air Operated Double Diaphragm Pump

Introducing ALL-FLO’s new line of A Series pumps, featuring simpler design with fewer parts and increased reliability. With fewer parts leading to quicker repair times as well as industry leading efficiency that reduces cost. The A200 comes in either aluminium or stainless steel and variety of internal materials that make them suitable for almost every application in the industry.

TOUGH; these pumps have stall-free, freeze free and lube-free air systems built to handle

extreme weather conditions.

VERSATILE; available in both aluminium and 316 stainless steel with a variety of optional

internal materials to suit a range of applications.

EXCEPTIONAL; performance makes these pumps the most efficient in today’s industry.

oeMs

MininG

oiL & GAs / refinery

PAinT & coATinG

superior performance with efficiency

2”

a200 – 2” air operated double diaphragm pump · a200 – 2” air operated double diaphragm...

Documents