workshop equipment catalogue - levanta...workshop equipment catalogue 9 • takes only 10 - 15...
TRANSCRIPT
WORKSHOP EQUIPMENT CATALOGUE
When quality equipment is the benchmark, there is no better choice than Levanta...
WORKSHOP EQUIPMENT CONTENTS
For further information visit: www.levanta.com.au or call 1300 577 541
WORKSHOP PRESSES ........................................................................................................................................................................................................................................................................... 4
OIL FILTER CRUSHERS .......................................................................................................................................................................................................................................................................... 8
AIR COMPRESSORS & ACCESSORIES ............................................................................................................................................................................................................................................. 12
WORKSHOP BENDERS & ACCESSORIES ........................................................................................................................................................................................................................................ 20
WORKSHOP EXPANDERS .................................................................................................................................................................................................................................................................. 18
EXHAUST EXTRACTION REEL SYSTEMS ....................................................................................................................................................................................................................................... 16
WORKLABS & BENCHES ......................................................................................................................................................................................................................................................................17
A/C RECOVERY MACHINES ............................................................................................................................................................................................................................................................... 10
WORKSHOP PRESSES
4 : WORKSHOP PRESSES For further information visit: www.levanta.com.au or call 1300 577 541
WORKSHOPPRESSES
5WORKSHOP EQUIPMENT CATALOGUE
PJ16H / PJ20H
• Foot-operated pneumatically controlled high speed and precise ram approach to work piece
• Traversing ram• Built-in pressure gauge at convenient eye level• Built-in safety overload valve• Welded frame and press table made from high
strength steel for long life• Removable ram end cap for mounting of various
piston heads• Supplied with 2 vee blocks
Description PJ16H PJ20HCapacity: 16,000 kg 20,000 kgStroke: 150 mm 150 mmHeight: 1620 mm 1620 mmWidth: 885 mm 885 mmWidth between legs: 640 mm 640 mmDepth between legs: 640 mm 130 mmClearance: 105 - 780 mm 105 - 780 mmWeight: 120 kg 130 kg
Technical Data
Hand hydraulic junior presses for passenger car workshops and light industry
PJ25H
• Foot-operated pneumatically controlled high speed and precise ram approach to work piece
• Traversing ram• Built-in pressure gauge at convenient eye level• Built-in safety overload valve
Description DimensionCapacity: 25,000 kgStroke: 150 mmHeight: 1620 mmWidth: 885 mmWidth between legs: 640 mmDepth between legs: 130 mmClearance: 105 - 780 mmWeight: 135 kg
Technical Data
Hand hydraulic junior press for passenger car workshops and light industry
• Welded frame and press table made from high strength steel for long life
• Removable ram end cap for mounting of various piston heads
• Supplied with 2 vee blocks
P40H
• Foot-operated double-acting pneumatically controlled high speed leaving both hands free for quick and precise positioning of item
• Traversing ram• With 300 mm stroke for dealing with demanding jobs• Built-in pressure gauge at convenient eye level
Description DimensionCapacity: 40,000 kgStroke: 300 mmHeight: 1740 mmWidth: 1190 mmWidth between legs: 850 mmDepth between legs: 215 mmClearance: 85 - 785 mmWeight: 425 kg
Technical Data
Hand hydraulic press for truck workshops and industry
• Wide, welded frame and press table ensuring high flexibility
• Ram-operated adjustment of table• Built-in safety overload valve• Removable ram end cap for mounting of various
piston heads• Supplied with 2 vee blocks
WORKSHOP PRESSES
6 : WORKSHOP PRESSES For further information visit: www.levanta.com.au or call 1300 577 541
P40EH1
Description DimensionCapacity: 40,000 kgStroke: 300 mmHeight: 1740 mmWidth: 1355 mmWidth between legs: 850 mmDepth between legs: 215 mmClearance: 85 - 785 mmPress speed: 6,1 mm/sReturn speed: 7,9 mm/sWeight: 445 kg
Technical Data
Electro-hydraulic press for truck workshops and industry
• Electro-hydraulic single stage pump (Press speed: 6,1 mm/sec)
• The pressure can be set to any required tonnage up to 40 t
• Traversing double-acting ram• Long stroke of 300 mm• Built-in pressure gauge at convenient eye level• Wide, welded frame and press table• Ram-operated
adjustment of table• Built-in safety
overload valve• Removable ram end
cap for mounting of various piston heads
• The motor is 3x400V and 50/60 Hz (can be switched for 3x230V)
• Supplied with 2 vee blocks
P60H
• Foot-operated double-acting pneumatically controlled high speed leaving both hands free for quick and precise positioning of item
• Traversing ram• With 300 mm stroke for dealing with demanding jobs• Built-in pressure gauge at convenient eye level
Description DimensionCapacity: 60,000 kgStroke: 300 mmHeight: 1982 mmWidth: 1390 mmWidth between legs: 1010 mmDepth between legs: 259 mmClearance: 180 - 780 mmWeight: 625 kg
Technical Data
Hand hydraulic press for truck workshops and heavy industry
• Wide, welded frame and press table ensuring high flexibility
• Ram-operated adjustment of table• Built-in safety overload valve• Removable ram end
cap for mounting of various piston heads
• Supplied with 2 vee blocks
P60EH1 / P60EH2
• P60EH1: Single stage pump• Press speed: 4,2 mm/sec• P60EH2: 2-stage pump• Press speed: 10,0 mm/sec• The pressure can be set to any required tonnage up
to 60 t• Traversing double-acting ram with long stroke of
300 mm• Built-in pressure gauge at convenient eye level• Ram-operated adjustment of table• Removable ram end cap for mounting of various
piston heads• The motor is 3x400V and 50/60 Hz (can be switched
for 3x230V)• Supplied with 2 vee blocks
Description P60EH1 P60EH2Capacity: 60,000 kg 60,000 kgStroke: 300 mm 300 mmHeight: 1982 mm 1982 mmWidth with motor: 1555 mm 1555 mmWidth between legs: 1010 mm 1010 mmDepth between legs: 259 mm 259 mmClearance: 180 - 780 mm 180 - 780 mmPress speed: 4,2 mm/s 10,0 mm/sReturn speed 5,9 mm/s 14,5 mm/sWeight: 630 kg 635 kg
Technical Data
Electro-hydraulic press for truck workshops and heavy industry
7WORKSHOP EQUIPMENT CATALOGUE
P100H
• Foot-operated double-acting pneumatically controlled high speed leaving both hands free for quick and precise positioning of item
• Traversing ram• With 300 mm stroke for dealing with demanding jobs• Built-in pressure gauge at convenient eye level
Description DimensionCapacity: 100,000 kgStroke: 300 mmHeight: 2042 mmWidth: 1600 mmWidth between legs: 1100 mmDepth between legs: 325 mmClearance: 75 - 675 mmWeight: 1200 kg
Technical Data
Hand hydraulic press for truck workshops and heavy industry
• Wide, welded frame and press table ensuring high flexibility
• Ram-operated adjustment of table• Built-in safety overload valve• Removable ram end
cap for mounting of various piston heads
• Supplied with 2 vee blocks
P100EH2
• Electro-hydraulic 2-stage pump (Press speed: 6.2 mm/sec)
• Traversing double-acting ram with long stroke of 300 mm• The pressure can be set to any required tonnage up to 100t
Electro-hydraulic press for truck workshops and heavy industry
• Built-in pressure gauge at convenient eye level• Wide, welded frame and press table ensuring high
flexibility• Ram-operated
adjustment of table• Removable ram
end cap for mounting of various piston heads
• The motor is 3x400V and 50/60 Hz (can be switched for 3x230V)
• Supplied with 2 vee blocks
Description DimensionCapacity: 100,000 kgStroke: 300 mmHeight: 2042 mmWidth with motor: 1765 mmWidth between legs: 1100 mmDepth between legs: 325 mmClearance: 75 - 675 mmPress speed: 6,2 mm/sReturn speed: 8,3 mm/sWeight: 1215 kg
Technical Data
OIL FILTER CRUSHERS
8 : OIL FILTER CRUSHERS For further information visit: www.levanta.com.au or call 1300 577 541
OIL FILTERCRUSHERS
9WORKSHOP EQUIPMENT CATALOGUE
• Takes only 10 - 15 seconds to crush a filter• Cuts your disposal costs by up to 75 - 80% due to
lower waste volume (crushes filters down to 1/4 - 1/5 of original size) and converts into scrap metal and recyclable oil
• Protects your employees from injury because of our unique safety features, saving costs of workers’ compensation and downtime
• Oil drains cleanly from bottom of crusher into your container or through a hose you can attach to our fitting under the crusher
• Crushing force of 9,000kg (Auto) and 22,000kgs (Truck)
• Ready to go – fully assembled and pre-tested prior to shipment
• 1 Year Warranty
TC100
Description DimensionOverall height: 1892 mmOverall width: 686 mmOverall depth: 762 mmChamber size: 343 mm (H) x 248 mm (Sq)Shipping weight: 282 kgCycle Time: 10 - 15 SecondsPneumatic Power: 120 PSI Air PressureCrushing Force: 22,360 kgCrushed Result: 1/4 to 1/5 of original size
Removes approx. 95% of oil
Technical Data
• Heavy gauge steel construction & chrome drive shafts, built for long lasting operation
• Air powered (pneumatic) uses shop air - saves on maintenance costs by avoiding typical problems with motors, pumps, fluids, & electrical issues; only 3 moving parts
MC1000
Description DimensionOverall height: 584 mmOverall width: 305 mmOverall depth: 305 mmChamber size: 216 mm (H) x 152 mm (Sq)Shipping weight: 31.2 kgCycle Time: 10 - 15 SecondsPneumatic Power: 120 PSI Air PressureCrushing Force: 9,072 kgCrushed Result: 1/4 to 1/5 of original size
Removes approx. 95% of oil
Technical Data
• Fast! 10 - 15 second Cycle time • Crushes filters down to 1/4 to 1/5 of original size • Removes approximately 95% of excess oil • Little or no maintenance • Only 3 moving parts • Quiet to operate
• Crushing force of 9,000kgs • Safety interlock - operation prohibited if door is open • Patented pivoting door design doesn’t allow oil to
drip on the floor when loading or retrieving filter from crusher unit
• No need to pre-drain filters • Oil drains cleanly from bottom of crusher into your
container or through a hose you can attach to our fitting (3/4”) under the crusher
• No electrical components • Simple air hook-up • Air filter included • Comes fully assembled and
tested • 1 Year Warranty
Description DimensionOverall height: 2475 mmOverall width: 770 mmOverall depth: 680 mmChamber size: 660 mm (H) x 248 mm (Sq)Shipping weight: 350 kgCycle Time: 10 - 15 SecondsPneumatic Power: 120 PSI Air PressureCrushing Force: 22,360 kgCrushed Result: 1/4 to 1/5 of original size
Removes approx. 95% of oil
Technical Data
TC500• Heavy gauge steel construction & chrome drive
shafts, built for long lasting operation• Air powered (pneumatic) uses shop air - saves on
maintenance costs by avoiding typical problems with motors, pumps, fluids, & electrical issues; only 3 moving parts
• Takes only 10 - 15 seconds to crush a filter• Cuts your disposal costs by up to 75 - 80% due to
lower waste volume (crushes filters down to 1/4 - 1/5 of original size) and converts into scrap metal and recyclable oil
• Protects your employees from injury because of our unique safety features, saving costs of workers’ compensation and downtime
• Oil drains cleanly from bottom of crusher into your container or through a hose you can attach to our fitting under the crusher
• Crushing force of 9,000kgs (Auto) and 22,000kgs (Truck)
• Ready to go – fully assembled and pre-tested prior to shipment
• 1 Year Warranty
AIR CONDITIONING MACHINES
10 : AIR CONDITIONING MACHINES For further information visit: www.levanta.com.au or call 1300 577 541
Equipped with the most complete database in the market, AUTODATA, with an unlimited expiry date, the Databank enables the device the automatic use of specific recharge parameters of the vehicle under maintenance while the recharge hoses have also been equipped with external quick couplings so as to avoid opening the tool in case of replacement.
The integrated printer enables the emission of a document acknowledging the successful results of the operations, which can be copied and given to the customer.
• Oil care function a protection system that prevents humidity from entering the oil container, in order to preserve the PAG oil’s purity until it is completely used
• UV Tracer• Non-condensing vent valve non condensible gases discharge with
manually-operated solenoid valve, it enables the eventual discharge of air by accelerating the recovery phase, thus guaranteeing higher purity of the refrigerant present in the vehicle
• Automation of the oil recharge• Hybrid function thanks to this “reset” function, residual PAG oil within the
machine can be completely replaced, with a view to managing changeover from maintenance of traditional engine vehicles to maintenance of hybrid vehicles
• Flushing with integrated solenoid valve• 1 Year Warranty• Capable of working with both R-134A or R-1234YF gas
CLIMA 8500
Description DimensionSoftware InterfaceDisplay: Alphanumeric – 4 x 20 LCDKeyboard: 6 - key membraneSoftware update: via RS232 with PC or CLIMA SOLUTION deviceMaximum Quantity In Vessel: 16.5 kgOil ContainersExhaust oil container capacity: 250 mlNew PAG oil container capacity: 250 mlUV tracer container capacity: 250 mlPneumatic CircuitVacuum pump capacity: 6m³ / hDehydrating filter capacity (expressed as kilograms of recovered refrigerant): 45 kgExternal HP and LP pipes length: 4.5 mAnalogue HP and LP pressure gauges: 80 mm, pulse-freeAnalogue vessel pressure gauge: 40 mm, pulse-freeWeight: 80 kgPower supply: 50HZ - 220-240V - 700W
Technical Data
A/C RECOVERYMACHINES
11WORKSHOP EQUIPMENT CATALOGUE
• The volumetric injection technology uses compression generated by the dosing cylinder which turns the present gas into liquid state thus reducing its volume. The special electronically controlled injector can hence push the liquefied gas into the vehicle circuit following a completely automatic sequence. A controlled system for the opening/closing of couplers allows for the recovery phase and optimises the charge cycle by allowing injection exclusively under suitable pressure conditions.
• Flushing with integrated solenoid valve• Hybrid Function “reset” function, residual PAG oil within the machine can be completely
replaced, with a view to managing changeover from maintenance of traditional engine vehicles to maintenance of hybrid vehicles
• Non-Condensing vent valve electronic, it enables the eventual discharge of air by accelerating the recovery phase, thus guaranteeing higher purity of the refrigerant present in the vessel
• The volumetric injection technology allows the exact dosing of the injected gas whose measurement features an accuracy index of more than 99% . This feature enables the full control of the operating costs for the recharge of the air conditioning circuit
• The quick couplers mounted on the stations fitted with VOLUMETRIC INJECTION technology are completely automatic and directly controlled by the complex software installed on the BRAIN BEE CLIMA stations.
• 1 Year Warranty• Screen guided operation and support
CLIMA 9000 P BUS
Description DimensionSoftware InterfaceDisplay: 4.3”, 480 x 272 graphics (widescreen), 65536 ColoursKeyboard: Touch screenSoftware update: via RS232 (with CLIMA Solution - optional)Capacity conforming to PED Directive: 32 kgOil ContainersExhaust oil container capacity: 1000 mlNew PAG oil container capacity: 1000 mlUV tracer container capacity: 250 mlOil/UV scale: 1g resolution, 5g precision with overcharge mechanical protectionPneumatic CircuitVacuum pump capacity: 8m³ / hRefrigerant gas recovery compressor displacement: 9 cc -high efficiencyDehydrating filter capacity (expressed as kilograms of recovered refrigerant): 160 kgExternal HP and LP pipes length: 4.5 mWeight: 80 kgPower supply: 50HZ - 240V
Technical Data
• Every intervention concerning maintenance, cleaning and recovery of the cooling system are performed by the device through the powerful control software without any assistance of the operator, who can actually optimise time with an increase in efficiency, and with a considerable decrease in costs
• Multipass enables a further closed-circuit filtering of the recovered cooling liquid• Non-Condensing vent valve electronic, it enables the eventual discharge of air by accelerating the recovery
phase, thus guaranteeing higher purity of the refrigerant present in the vehicle
• Integrated printer enables the emission of a document acknowledging the successful results of the operations. It can be customised by inserting records of the garage
• Wheel system is specifically designed to guarantee rotation of the machine’s axle for easy positioning in situations where space is limited
• The 10 m3/h vacuum pump, among the most powerful pumps in the market, enables optimisation of liquid recovery time from the vehicle system, by further increasing the operative efficiency.
• The 26-litre gas cylinder enables to perform more than 100 recharges, by reducing to the minimum the maintenance interventions on the tool
• Recharge hoses have also been equipped with external quick couplings so as to avoid opening the tool in case of replacement
• 1 Year Warranty
CLIMA 9000
Description DimensionSoftware InterfaceDisplay: 4.3”, 480 x 272 graphics (widescreen), 65536 ColoursKeyboard: Touch screenSoftware update: via RS232Capacity conforming to PED Directive: 19.6 lOil ContainersExhaust oil container capacity: 250 mlNew PAG oil container capacity: 250 mlUV tracer container capacity: 250 mlOil/UV scale: 1g resolution, 5g precision with overcharge mechanical protectionPneumatic CircuitVacuum pump capacity: 10m³ / hRefrigerant gas recovery compressor displacement: 14 ccDehydrating filter capacity (expressed as kilograms of recovered refrigerant): 45 kgNet HP and LP pipes length: 4.5 mWeight: 100 kgPower supply: 50HZ - 240V
Technical Data
AIR COMPRESSORS
12 : AIR COMPRESSORS For further information visit: www.levanta.com.au or call 1300 577 541
AIRCOMPRESSORS
13WORKSHOP EQUIPMENT CATALOGUE
• Forged aluminium alloy connecting rods• 100% cast iron block• Cast iron cylinders and heads with deep cooling fins• Forced-air after cooler• Oil sight gauge• Automatic pressure switch• ASME rated overload
pressure safety valve• Pressure gauge with service
valve• Oversized replaceable air
filters• Automatic start / stop• ASME rated tank• No need for harmonic
balancer• Optional Moisture Minder®
available• Optional 1/2” rubber anti-
vibration pads available
LS580V-503
Description DimensionHorsepower: 5 HpTank: 303 lVoltage: 208 - 460 VPhase: 3 PhHertz: 50 HzAmps: 13.6 ampMax psi: 175 psiCFM: 20.2 - 22.8
Technical Data
• Siemens™ UL approved electric mag-starter• Integrated pressure unloader valve for loadless starts• Precision-balanced fan flywheel• Fully-enclosed belt guard• Oversized tapered roller bearings• Precision-balanced forged ductile iron crankshaft• Forged aluminium alloy pistons
• Precision-balanced forged ductile iron crankshaft• Forged aluminum alloy pistons• Forged aluminum alloy connecting rods• 100% cast iron block• Cast iron cylinders and heads with deep cooling fins• Forced-air after cooler• Oil sight gauge• Automatic pressure switch• ASME rated overload
pressure safety valve• Pressure gauge with service
valve• Oversized replaceable air
filters• Automatic start / stop• ASME rated tank• No need for harmonic
balancer• Optional 1/2” rubber anti-
vibration pads available
LS7580V-503
Description DimensionHorsepower: 7.5 HpTank: 303 lVoltage: 230 - 460 VPhase: 3 PhHertz: 50 HzAmps: 10 - 20 ampMax psi: 175 psiCFM: 25.3 - 28.5
Technical Data
• 7-1/2 Hp, energy-efficient, UL approved Baldor™ motor
• Siemens™ UL approved electric mag-starter• Integrated pressure unloader valve for loadless starts• Precision-balanced fan flywheel• Fully-enclosed belt guard• Oversized tapered roller bearings
CSA 10 / CSA 15 / CSA 20CSA TANK & CSA DRY are two industrial options for compressed air production. They are compact, pre-assembled and ready for use. Designed for small and medium-scale industrial needs. Ideal where space is limited or close proximity to the work site is required.
• High performance, silent running, simple installation and maintenance, makes CSA compressor the top class of models currently available in the market
• The CSA range is a modern and aesthetically designed belt driven oil lubricated screw compressor offering a wide choice of variants, built with quality components in a state of the art assembly plant
• CSA range can fulfil industrial requirements up to 71 cfm with maximum reliability and efficiency whilst ensuring user friendliness, easy serviceability and low noise levels
• Everything required from a compressor with technology you can trust
• Atmospheric air is compressed by the compressor and stored in the air receiver, then filtered and dried before entering the air network.
• Condensates formed during the various compressed air treatment phases are automatically drained.
• Sturdy structure allows all components to be assembled without affecting the tank’s stability.
Description CSA 10/10 CSA 15/10 CSA 20/10Bar: 10 10 10PSI: 145 145 145HP: 10 15 20kW: 7,5 11 15l/1’: 1.000 1.435 1.790m3/h: 60,0 86,1 107,4cfm: 35,3 50,7 63,2dB: 64 63 65
Technical Data
AIR COMPRESSORS
14 : AIR COMPRESSORS For further information visit: www.levanta.com.au or call 1300 577 541
Description T30 415V V40 415V T55 415V T75 415VMotor Power: 4 kWh (5.5 hp) 5.5 kWh (7.5 hp) 7.5 kWh (10 hp) 11 kWh (15 hp)Pump Displacement: 781 L/min (27.6 cfm) 1,041 L/min (36.8 cfm) 1,479 L/min (52.3 cfm) 2,086 L/min (73.7 cfm)Free Air Delivery: 604 L/min (21.3 cfm) 777 L/min (27.5 cfm) 1,203 L/min (42.5 cfm) 1,729 L/min (61.1 cfm)Maximum Pressure: 980 kPa (142 psi) 980 kPa (142 psi) 980 kPa (142 psi) 980 kPa (142 psi)Tank Volume: 150 Litres 250 Litres 300 Litres 400 LitresPump Model: Fusheng TA-80 Fusheng TA-100 Fusheng TA-100 Fusheng TA-120Pump Speed: 863 rpm 946 rpm 897 rpm 769 rpmCurrent Draw: 8.3 Amps 12.2 Amps 16.0 Amps 23.0 AmpsProduct Code: AM T30 415V AM V40 415V AM T55 415V AM T75 415V
Technical Data
415 Volt Air CompressorsThe Airmac 415 Volt series is the best choice for industry users who need a reliable heavy duty air compressor for their factory or workshop. Widely regarded as the gold standard of three-phase electric compressors, each model from 3 to 11kWh offers a superb combination of unique features and high performance.
15WORKSHOP EQUIPMENT CATALOGUE
AIR RECEIVER TANK ANTI-VIBRATION PADS
• Suits LS15RS• 454 Litre capacity• 2 Year Limited Warranty
• Set of 4• Made from high-quality elastomer compound• Tread greatly reduces the chance slippage• Resists aging, compression set, water and oil
MOISTURE MINDER MOISTURE MINDER KIT
• LED lights and test button• Available with or without timer• Built-in, self-cleaning strainer resists clogging• Does not stick open• No wasted air• Easy installation to existing filters• Allows drain valve to be mounted higher than the mandatory 18”• Bulkhead feature allows for easy installation on dryer side panel or motor
mounting plates• Optional mounting bracket available
• Kit includes everything you need to mount the Moisture Minder® quickly and easily
• Mounts Moisture Minder® to dryer side panels• Mounts Moisture Minder® to motor mounting plates• Mounts Moisture Minder® to standard piping
EXHAUST EXTRACTION REEL SYSTEMS
16 : EXHAUST EXTRACTION REEL SYSTEMS For further information visit: www.levanta.com.au or call 1300 577 541
Spring recoil hose reel complete with fan, flexible hose and stopper
GMRF-10010
On / Off switch for fans with overheating protection
GSI-0.5
Rubber nozzle opening with intake for C.O. probe, silicon handle and gripper with clamps covered by vulcanized rubber
GRNGM-160100
Y piece complete with 1.25mt hose each side and oval rubber nozzles
GYN-100100100
Switchboard for the start and stop of the fans
GSQED-15
Crushproof flexible hose for exhaust extraction resistant up to 200°C
GT2-100-20
Microswitch for the automatic start / stop of the centralised fan
GM
Sliding hose reel for rail series GAT complete with hose and stopper
GSR
EXHAUSTEXTRACTION
REEL SYSTEMS
17WORKSHOP EQUIPMENT CATALOGUE
Piece trolley with 3 shelves and ABS protection, RAL 7040 (800 mm x 450 mm x 850 mm)
WB-T3
Workstation complete with: NR.1 WB-2000 Workbench 2mtr long made of sturdy steel 2mm thick. NR.1 WB-WT2000A ABS Top protection.
NR.3 WB-2AF Adjustable feet set.
WB - 021
Tool trolley 6 drawers with slides
WB-T6
Workstation set, complete with: NR.1 WB-2000 Workbench 2mtr long made of sturdy steel 2mm thick. NR.1 WB-WT2000A ABS top protection. NR.3
WB-2AF adjustable feet set. NR.1 WB-RC1000 closet with door, that can be hidden in the upper part. NR.1 WB-W1000 waste bin. NR.1 WB-WP2000 wall panel.
WB - 016
Heavy duty bench including sturdy 2mm steel top, ABS top protection
WB - 010
Workstation set, complete with: NR.1 WB-2000 Workbench 2mtr long made of sturdy steel 2mm thick. NR.1 WB-WT2000A ABS top protection. NR.3
WB-2AF adjustable feet set. NR.1 WB-DC1000 Drawer-chest with 4 drawers. NR.1 WB-W1000 waste bin. NR.1 WB-WP2000 wall panel.
WB - 013
Heavy duty bench including sturdy 2mm steel top, ABS top protection, adjustable feet
WB - 011
Workstation set, complete with: NR.1 WB-1500 Workbench 1.5m long made from sturdy steel 2mm thick. NR.1 WB-DC1000 Drawer-chest with 4 drawers. NR.1 WB-S0500 shelf with side handing tool panels. NR.1 WB-WT1500A ABS Top protection.
NR.2 WB-2AF Adjustable Feet. NR.1 WB-WP1500 Wall Panel.
WB - 009
WORKLABS & BENCHES
Panel - Hanging Unit 1m in length
WB - H1000
Workstation set, complete with: NR.1 WB-2000 Workbench 2m long made of sturdy steel 2mm thick. NR.1 WB-DC1000 Drawer-chest with 4 drawers. NR.1 WB-RC 1000 Closet with door, that can be hidden in the upper part. NR.1 WB-
WT2000A ABS top protection. NR.1 WB-3AF Adjustable feet set.
WB - 014
WORKLABS& BENCHES
WORKSHOP EXPANDERS
18 : WORKSHOP EXPANDERS For further information visit: www.levanta.com.au or call 1300 577 541
WORKSHOPEXPANDERS
19WORKSHOP EQUIPMENT CATALOGUE
H1691 - Portable Expander• Hands-free operation with foot pedal activation• Allows you to create custom brackets with Huth’s 985
Rod Bracket Bender (optional)• Standard expanding capacity from 1 1/2” to 3 1/2”• Expanding capacity from 1” to 5 1/2” with additional
tooling.• Powerful 2HP Motor in 240v• 25,000 pounds of expanding power• Features Huth’s Accu-Sizer system• Built-in tool tray for easy access to tooling• Rugged cart for maximum portability• Just wheel the 1691 to the job and put Huth’s
expanding power to work. Quickly and easily size muffler end tubes and pipes anywhere in your shop
• 1 Year Warranty
H1673 - Portable Swage Expander• 5 HP Motor, single-phase (30amp), or three-phase
(20amp)• Runs on 415volt or 240volt, 50Hz supply• 25,000 pounds of expanding power• 3 1/2” cylinder• Expanding capacity from 1” to 5 1/2”• Features Huth’s Accu-Sizer system• Adjustable collar for expanding 1” to 3 1/2”• Collet holder for 1” to 2 1/2” O.D. tubing• Swaging capacity from 1” to 3”• Front swivel caster with brake• Compact design – 1016mm high, 940mm long,
610mm” wide• Mounted on its own easy-wheeling cart, Huth’s Model
1673 Portable Swager/Expander equips you to form ball joints, slip joints, flares and flanges and perform doming and reducing anywhere in your shop.
• 1 Year Warranty
H1690 - Bench Top Expander• Hands-free operation with foot pedal Activation• Create custom brackets with Huth’s Rod Bracket
Bender (optional).• Standard capacity from 1 1/2” to 3 1/2”• Capacity from 1” to 5 1/2” with additional tooling• Powerful 2HP motor available in 240V, 20 Amp. • 25,000 lbs of expanding power• Features Huth’s Accu-Sizer™ system for quick, precise
expanding each and every time.• Built-in tool tray for easy access to tooling• Includes: 508 Arbor, 498 Small Arbor Tip, 499 Large
Arbor Tip, as well as 473, 474, 475, 476, and 477 Segment Sets
• The 1690’s compact design allows it to fit on your bench-top while the foot pedal gives you hands-free operation.
• Quickly and easily size muffler end tubes and pipes. • 1 Year Warranty
1685 - Mitey Mate JNR• Expanding capacity from 1 1/2” to 2 1/2” comes
standard• 3”, 3 1/2”, and 4” capability with additional tooling• Air regulator included in package• Huth redefines expanding portability and
convenience with this down-sized, air-powered expanding unit. Ideal for making flares (requires part 440-flaring segment), ball joints (requires use of ball-joint segment tools), and slip connections under the vehicle or on the bench, Mitey Mate Jr. is not a lesser expander: it delivers both the power and the accuracy you demand.
• Set to operate at 3200 psi (shop air pressure between 80 and 120 psi maximum - air regulator included in package) this pint-sized power-house puts 17,000 pounds of expanding force in your hands. Mitey Mate Jr. also comes with tooling to expand 1 1/2” to 2 1/2” I.D. mufflers and pipes (3”, 3 1/2” or 4” capability with additional tooling).
• It also comes with Huth’s unique Accu-Sizer system for right-on expansions, job after job.
• The expander itself, with its high-impact pistol grip, removable arbor tips and simple-to-setup bulls-eye sizing adjustments, weighs only 3.2kg. All three peices together weigh only 15kg.
• 1 Year Warranty
WORKSHOP BENDERS
20 : WORKSHOP BENDERS For further information visit: www.levanta.com.au or call 1300 577 541
WORKSHOPBENDERS
21WORKSHOP EQUIPMENT CATALOGUE
1502BA-3A• 2 separate end-finishing units at rear for all necessary
flaring and expanding• Dual-unit expander• Digital control for automatic or manual bending
operations• 202 & 302 Standard Tooling Package included• Includes high-speed clampless swager and internal
expander• Easy-to-use drop-in collar makes swaging operations
quick and efficient• Twist-lock tooling• Integrated power-relief control valve• Pass-through cylinder stem passes completely
through the primary frame• Rigid 6” x 6” x 3/8” welded-steel tube frame• Commercial-grade hydraulic cylinders• All cylinders feature chrome-molly shafts, conforming
to ANSI 92.2 standards• Quick-release bending dyes for reduced set-up times• Bending heads precision grounded to within .002”• 2-1/2” oversized barrel shafts for maximum
dependability and minimum maintenance• NEMA rated on / off switch box incorporates overload
relays that automatically disrupt power supply should an unforeseen over-current situation occur
• Pressure gauges let you know exactly what the system pressures are at all times
• Remote foot operated controls for added long-distance control
• One piece barrel ensures that the bending gates stay perfectly aligned with the ram
• Strong, 5 Hp Baldor energy efficient motor delivers maximum performance
• Direct-drive, high-speed, 4 gpm pump• Single enclosed bottom cylinder applies pressure
evenly to the back gates and, because it is hidden, does not interfere with the tubing
• Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination
• Over-sized 1/2” high-pressure hose provides better speed and cooling
• Open-sided swager box allows for easier access and reduces the chance of “crashing” tools and damaging the cylinder
1502BAS-3A• 2 separate end-finishing units at rear for all necessary
flaring and expanding• Dual-unit expander• 3-button control for automatic or manual bending
operations• 202 & 302 Standard Tooling Package included• Comes complete with quick release bending and
finishing dies• Includes high-speed clampless swager and internal
expander• Extensively updated bend data system supports light
trucks back to mid-60s• Integrated power-relief control valve• Pass-through cylinder stem passes completely
through the primary frame• Rigid 6” x 6” x 3/8” welded-steel tube frame• Quick-release bending dies for reduced set-up times• Bending heads precision grounded to within .002”• 2-1/2” oversized barrel shafts for maximum
dependability and minimum maintenance• Standard grease fittings allow for simple lubrication• NEMA rated on / off switch box incorporates overload
relays that automatically disrupt power supply should an unforeseen over-current situation occur
• Pressure gauges let you know exactly what the system pressures are at all times
• Remote foot operated controls for added long-distance control
• One piece barrel ensures that the bending gates stay perfectly aligned with the ram
• Strong, 5 Hp Baldor energy efficient motor delivers maximum performance
• Direct-drive, high-speed, 4 gpm pump• Single enclosed bottom cylinder applies pressure
evenly to the back gates and, because it is hidden, does not interfere with the tubing
• Large capacity fluid reservoir keeps the hydraulic oil running cooler and prevents contamination
• Over-sized 1/2” high-pressure hose provides better speed and cooling
• Open-sided swager box allows for easier access and reduces the chance of “crashing” tools and damaging the cylinder
• 180° bending dye available
WORKSHOP BENDERS
22 : WORKSHOP BENDERS For further information visit: www.levanta.com.au or call 1300 577 541
300-1
300-2
CS-1
Workshop BendersAccessories
• Made from precision machined solid steel• Step-cut manufacturing process contains larger-sized tubing• Gives benders the ability to bend 3” OD tubing• 6-piece set
• Made from precision machined solid steel• Step-cut manufacturing process contains larger-sized tubing• Gives BendPak benders the ability to bend 3” OD tubing• 4-piece set
• Over 3,500 cards on one CD• 10,000 bending applications• Supports exhaust systems going back as far as 1965• Fully-illustrated reference catalog• Rotation dial for standard and “mirror image” bending
H2806• Easy-to–use manual knee pedal control• Push button control• Automatic Depth-Of-Bend selector• Auxiliary on/off switch• 58,000 lbs of bending force - more than enough for
3” tubing• Heavy duty Swager/Expander• Rugged I-Beam construction• Model 2806 is designed for high volume shops that
need quick, precise, bending and end finishing.• The 2806 offers the convenience of a knee pedal
control along with manual and automatic push buttons. A reduced size control panel allows the operator to get closer to the work area for more precision and less fatigue.
• The heavy duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1” to 3” tubing. The expander end allows for expansions from 1” to 5 1/2”. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.
• The 2806 bender is available with your choice of tooling packages. (Refer to 1502BA / 1502-BAS)
• 3PH 415V motor• 1 Year Warranty
HB-10• Comes with comprehensive tooling package and
instructional DVD• Easy-To-Use Knee Pad Control• Manual Depth-of-Bend Indicator• Complete Manual Control• 58,000 lbs of bending power - More than enough for
3” tubing• Agricultural Cylinders• Flat Tool Tray• Bending Dye Retainer• Heavy-Duty Swager/Expander• Rugged I-Beam Construction• Exclusive Safety-Guard Package• Front Swivel Casters w/o Brakes • 3PH 415V motor• 1 Year Warranty
W O R K S H O P E Q U I P M E N T C A T A L O G U E
Queensland • New South Wales • Australian Capitol Territory • Victoria • South Australia • Western Australia • Tasmania • Northern Territory
Telephone: 1300 577 541
Fax: 1300 677 643
Email: [email protected]
Web: www.levanta.com.au
Head Office: 17 Canberra Street, Hemmant QLD 4174
NSW Office: 89 Gascoigne Street, Kingswood NSW 2747
WA Office: 9 Beete Street, Welshpool WA 6106