tools & equipment catalogue - uts ltdutsltd.ie/wp...tools-equipment-catalogue-low-res.pdf ·...

Sales • Support • Solutions |

ELECTRONIC – MASCHINENBAU

Tools & Equipment Catalogue

| www.utsltd.ie1

[Type text]

Company Overview

Underground Technical Services is involved in the supply and repair of equipment to the sewer and drainage industry. At UTS Ltd. we are passionate about the environmental services sector. We believe that our excitement and constant quest to find the best solutions to the challenges faced by our customers will ensure that our company can always offer the best products on the market and an unrivalled after sales support service. Our product range includes main line camera systems, push rod cameras, water recycling sewer cleaning vehicles, jetting nozzles, vanpacks and jetting trailers, pipe rehabilitation repair equipment, robotic cutting systems as well as smaller tools and accessories associated with the industry. We have sourced the best products from manufactures across Europe, UK and USA. After sales support and service is at the very core of our company and is something we take very seriously. We believe that by continuing to support our customers through the use of our high level of technical ability and knowledge will enable us to further grow our loyal customer base We also have a dedicated Show Room which allows us to showcase the equipment available and provide product demonstrations. Here you will find the most comprehensive range of drain tools, equipment and machinery in the country.

Sales • Support • Solutions | 2

[Type text]

Contents

Nuflex Universal & Lockfast Rods & Accessories ............................................................ 4

Steelkane Rods & Accessories .......................................................................................... 7

Cobra Rods ......................................................................................................................... 9

Domestic Range Rods & Accessories ............................................................................. 10

Gully Grabs, Stone Pickers & Silt traps ........................................................................... 11

Cover Lifting Tools & Systems ........................................................................................ 12

Stoppers ............................................................................................................................ 14

Drain Tracing & Smoke ..................................................................................................... 17

Spring Machines & Hand held Drain Cleaning Equipment ............................................. 18

Safety Equipment .............................................................................................................. 20

Pressure Testing ............................................................................................................... 20

Jetting Accessories .......................................................................................................... 21

Jetting Nozzles .................................................................................................................. 22

Drain Jetting : Van Packs, Trailer and Combi units ........................................................ 28

Sewer Trucks, Recyclers, Tankers .................................................................................. 30

Pushrod Camera Systems & Accessories ...................................................................... 31

Mainline Camera Systems ................................................................................................ 32

Robotic Cutters ................................................................................................................. 33

Sewer Repair ..................................................................................................................... 33

After Sales Support & Service ......................................................................................... 34

3

6

8

9

10

11

13

16

17

19

19

20

21

27

29

30

31

32

32

33

| www.utsltd.ie3

[Type text]

Nuflex Universal & Lockfast Rods & Accessories

Nuflex Lockfast Joint Rod

These rods can be rotated clockwise or anti-clockwise

Part Number Description

00.04.00.19.003/ROD Nuflex Ideal Lockfast Rod - 3ft long x 19mm

00.04.00.25.015/ROD Nuflex Ideal Lockfast Rod - 1.5m long x 25mm

00.04.00.25.020/ROD Nuflex Ideal Lockfast Rod - 2.0m long x 25mm

Nuflex Universal Joint Rod

These rods can only be rotated clockwise


00.04.50.19.003/ROD Nuflex Universal Rod - 3ft long x 19mm

00.04.50.25.015/ROD Nuflex Universal Rod - 1.5m x 25mm

00.04.50.25.020/ROD Nuflex Universal Rod - 2.0m long x 25mm

Rotating Handle

Rotating Handle for Nuflex Ideal Lockfast Rods fits into two-way ferrules to enable rods to be rotated in either direction. Rotating Handle for Nuflex Universal Rods rotates rods in clockwise direction ONLY.


00.04.00.00.000/RHA For use with Nuflex Ideal Lockfast Rods

00.04.50.00.000/RHA For use with Nuflex Universal Rods

Rod Retrieving Tool

For recovery of loose rods in drains


00.04.00.00.000/RTO For use with Nuflex Ideal Lockfast Rods

00.04.50.00.000/RTO For use with Nuflex Universal Rods

Rubber Plungers

For plunging blockages in traps Part Number Description

00.04.00.00.100/RPL 100mm (4 inch) diameter, for Nuflex Lockfast Rods



00.04.50.00.075/RPL 75mm (3 inch) diameter, for Nuflex Universal Rods





[Type text]


Worm Screw – Single

An essential tool for clearing blockages. Part Number Description

00.04.00.00.050/SWS 50mm (2 inch) diameter, for Nuflex Lockfast Rods

00.04.00.00.075/SWS 75mm (3 inch) diameter, for Nuflex Lockfast Rods

00.04.50.00.050/SWS 50mm (2 inch) diameter, for Nuflex Universal Rods

00.04.50.00.075/SWS 75mm (3 inch) diameter, for Nuflex Universal Rods

Worm Screw - Double

An essential tool for clearing blockages. Part Number Description

00.04.00.00.050/DWS 50mm (2 inch) diameter, for Nuflex Lockfast Rods

00.04.00.00.075/DWS 75mm (3 inch) diameter, for Nuflex Lockfast Rods

00.04.50.00.050/DWS 50mm (2 inch) diameter, for Nuflex Universal Rods

00.04.50.00.075/DWS 75mm (3 inch) diameter, for Nuflex Universal Rods

Crown Root Cutter

Dual purpose tool for cutting fibrous roots & silt breaking Part Number Description

00.04.00.00.090/CRC Crown Root Cutter 90mm (for Nuflex Lockfast Rods)

00.04.00.00.140/CRC Crown Root Cutter 140mm (for Nuflex Lockfast

Rods)

00.04.50.00.090/CRC Crown Root Cutter 90mm (for Nuflex Universal

Rods)

00.04.50.00.140/CRC Crown Root Cutter 140mm (for Nuflex Universal

Rods)

Auger Root Cutter

Has a coiled blade which, when rotated in the pipe, will cut through roots that are obstructing the pipe.


00.04.00.00.090/ARC Auger Root Cutter 90mm (for Nuflex Lockfast Rods)

00.04.00.00.140/ARC Auger Root Cutter 140mm (for Nuflex Lockfast Rods)

00.04.50.00.090/ARC Auger Root Cutter 90mm (for Nuflex Universal

Rods)

00.04.50.00.140/ARC Auger Root Cutter 140mm (for Nuflex Universal

Rods)

| www.utsltd.ie5

[Type text]


Jointed Scraper

For dragging silt from drains.


00.04.00.00.090/JSC 90mm (3.5 inch) diameter, for Nuflex Lockfast Rods



00.04.50.00.090/JSC 90mm (3.5 inch) diameter, for Nuflex Universal Rods



Auger Borer For clearing mud, silt and roots from drains and sewers


00.04.00.00.090/ABO Auger Borer - 90mm (for Nuflex Lockfast Rods)

00.04.50.00.090/ABO Auger Borer - - 90mm (for Nuflex Universal Rods)

Brass Clearing Wheel

Fitted to the front end of rods, this wheel guides rods around difficult bends and removes minor blockages by pushing material clear


00.04.00.00.000/BCW For use with Nuflex Ideal Lockfast Rods

00.04.50.00.000/BCW For use with Nuflex Universal Rods


[Type text]

Steelkane Rods & Accessories

Steelkane Rods and Accessories

Steelkane rods, manufactured from high tensile steel, are the quickest and easiest way to clean or clear drains and sewers. Features: - Easy rodding of longer pipe systems. - Two-way Lockfast ferrules enable rods to be rotated in either direction without fear of separation. - All-metal construction for durability and minimal replacement costs. - Easily cleaned. - Operated above ground - even in deep manholes.


00.01.08.00.010/ROD 1m x 8mm (5/16 inch) diameter Heavy Duty Rods

00.01.08.00.015/ROD 1.5m x 8mm (5/16 inch) diameter Heavy Duty Rods

00.01.08.00.020/ROD 2m x 8mm (5/16 inch) diameter Heavy Duty Rods

Rod Retrieving Tool

For the recovery of loose rods in drains


00.01.08.00.000/RTO Rod Retrieval tool For use with 8mm steelkane rods

Brass Clearing Wheel

Fitted to the front end of rods, this wheel guides rods around difficult bends and removes minor blockages by pushing material clear


00.01.08.00.000/BCW Brass Clearing Wheel For use with 8mm steelkane

rods

Chisel

For breaking and/or removing hard substances.


00.01.08.00.000/CHI Chisel For use with 8mm & 10mm steelkane rods

Coring Iron

For removing corrosion on drain walls


00.01.08.00.000/CIR Coring iron For use with 8mm & 10mm steelkane rods

| www.utsltd.ie7

[Type text]


Diamond Shaped Spearhead

For breaking through hard substances


00.01.08.00.000/DIA Diamond shaped spearhead For use with 8mm &

10mm steelkane rods

Jointed Scraper for steelkane rods

For dragging silt from drains.


00.01.08.00.090/JSC 90mm (3.5 inch) diameter, for 8mm & 10mm rods



Rotating Handle

Fits into two-way ferrules to enable rods to be rotated in either direction.


00.01.08.00.000/RHA Rotating handle For use with 8mm steelkane rods

Rubber Plungers for steelkane rods

For plunging blockages in traps


00.01.08.00.075/RPL 75mm (3 inch) diameter, for 8mm & 10mm rods



00.01.08.00.225/RP 225mm (9 inch) diameter, for 8mm & 10mm rods

Worm Screw - Single - for 8mm steelkane rod

An essential tool for clearing blockages.


00.01.08.00.050/SWS 50mm (2 inch) diameter, for 8mm & 10mm rods

00.01.08.00.075/SWS 75mm (3 inch) diameter, for 8mm & 10mm rods

00.01.08.00.090/SWS 90mm (3.5 inch) diameter, for 8mm & 10mm rods

00.01.08.00.140/SWS 140mm (5.5 inch) diameter, for 8mm & 10mm rods


[Type text]


Worm Screw - Double - for 8mm steelkane rod

An essential tool for clearing blockages.


00.01.08.00.050/DWS 50mm (2 inch) diameter, for 8mm & 10mm rods

00.01.08.00.075/DWS 75mm (3 inch) diameter, for 8mm & 10mm rods

00.01.08.00.090/DWS 90mm (3.5 inch) diameter, for 8mm & 10mm rods

00.01.08.00.140/DWS 140mm (5.5 inch) diameter, for 8mm & 10mm rods

Auger Root Cutter for 8mm and 10mm Rods

The Auger Root Cutter has a coiled blade which, when rotated in the pipe, will cut through roots that are obstructing the pipe.


00.01.08.00.090/ARC 90mm (3.5 inch) diameter, for 8mm & 10mm rods



Auger Borer For clearing mud, silt and roots from drains and sewers


00.01.08.00.090/ABO Auger Borer 90mm (for use with 8mm & 10mm

Steelkane Rods)

Cobra Rods

Cobra Continuous Rod

A continuous high quality coated fibreglass rod with brass end fittings and smooth profile guiding tip. The frame is of rugged steel construction with zinc plating and an integral fully adjustable brake system fitted as standard.


00.03.09.00.100/COB 100m long x 9.0mm diameter on wheeled frame




| www.utsltd.ie9

[Type text]

Domestic Range Rods & Accessories

Basic Universal Drain Rod Set


00.04.50.10.000/BSE

Basic Universal Drain Rod Set - (Set Includes 10 Rods 3ft x 19mm, 2" worm screw, 4" Rubber Plunger & Carry Bag)

Enhanced Universal Drain Rod Set


00.04.50.10.000/ESE

Enhanced Universal Drain Rod Set - (Set Includes 10 Rods 1m x 19mm, 2" worm screw, 4" Rubber Plunger, 4" Jointed Scraper, Brass Clearing Wheel, Gloves & Carry Bag)

Basic Lockfast Drain Rod Set


00.04.00.10.000/BSE

Basic Lockfast Drain Rod Set - (Set Includes 10 Rods 3ft x 19mm, 2" worm screw, 4" Rubber Plunger & Carry Bag)

Enhanced Lockfast Drain Rod Set


00.04.00.10.000/ESE

Enhanced Lockfast Drain Rod Set - (Set Includes 10 Rods 3ft x 19mm, 2" worm screw, 4" Rubber Plunger, 4" Jointed Scraper, Brass Clearing Wheel, Gloves & Carry Bag)


[Type text]

Gully Grabs, Stone Pickers & Silt traps

Gully Grab - Round Bowl

Most effective tools for removing blockages and obstructions


00.06.00.10.088/ROU 1.0m Handle with 88mm Round Bowl





Gully Grab - Square Bowl

Most effective tools for removing blockages and obstructions


00.06.00.15.150/SQU 1.5m Handle with 150mm Square Bowl




Stone Picker

Stone pickers for use in gulleys, silt traps, manholes etc


00.06.00.10.000/SPI Stone picker with 1m Handle

00.06.00.15.000/SPI Stone picker with 1.5m Handle



Silt Catcher for Drain Jetting

Lower the silt catcher into the channel of the manhole using the Rod fitting or rope loop. The debris and silt pulled back to the manhole while jetting will enter the silt catcher. The silt catcher can be easily lifted out and emptied making this a very quick, easy and safe way to remove debris from manhole after jetting.


00.04.00.00.100/STR Silt Catcher – 100mm (4”)

00.04.00.00.150/STR Silt Catcher – 150mm (6”)

| www.utsltd.ie11

[Type text]

Cover Lifting Tools & Systems

Manhole Buddy Steel Lifting Trolley


MB-TROLLEY-STEEL

Steel trolley has Working Load Limit of 150 kg. Standard wheels (200 mm dia.) are fitted with solid rubber tyres and internal roller bearings. Weight 15 kg

MagTec Mega Magnet


MB-MAGTEC-MEGA

Mega magnet has referenced load capacity of 600 kg. Fitted with rotating lifting hanger, having three lifting pin positions.

KeyTec Spreader Bar Kit (Folding)


MB-KEYTEC-FOLD

Folding spreader bar with rotating lifting hanger; high leverage unseating hook; tool bag for lifting keys and hook.

KeyTec Key Sets Pairs of coarse threaded stainless steel lifting keys for effortless use.

Corrosion proof


MB-KEY-35T 35 mm T-blade

MB-KEY-25T 25 mm T-blade

MB-KEY-20L 20 mm L-blade

MB-KEY-PACKAGE Set of 3 pairs of keys, 35mm T, 25mm T, 20mm L

4 Leg Adjustable Chain Set


MB-CHAINTEC

Comprises slotted chain block with rotating lifting hanger and two 1200 mm chains. Chains certified and tagged to SWL of 150 kg and fitted with 13 mm length hook (10 mm diameter)

Gully Opener


Gully-Opener

The Gully Opener is easy to use, highly effective and greatly reduces exposure to common lifting injuries.


[Type text]

Cover Lifting Tools & Systems

Multi Tip Manhole Key set


Multi-Tip-Key Made from Carbon Steel for added strength and Zinc

Plated to protect from rust.

Kit includes: 2 x interchangeable Handles 440mm long 2 x 33mm T-tips 2 x 22mm T-tips 2 x 10mm side entry hooks 2 x M10mm screw thread tips 2 x M16mm screw thread tips 1 x short stopcock tip 1 x long stopcock tip Storage case for tips

Manhole Cover Hand Keys Galvanised Manhole Cover Hand Keys with Triangle handle. Medium Duty - Welded -

Sold in pairs – 600mm long


MONMLK20 Manhole Cover Hand Keys with Triangle handle.

Medium Duty

Gatic Keys Manhole Cover "Gatic" Hand Key - sold in pairs with a spanner.


00.07.00.00.580/LGK Manhole Cover "Gatic" Hand Key - 580mm Long Handle with spanner.

Manhole Cover Hand Keys with 'T' Handle – Long Manhole Cover Hand Keys with "T" Handle. Heavy Duty - Forged - Sold in

pairs


00.07.00.30.710/THA Manhole Cover Hand Keys - 710mm long with 300mm 'T' Handle

Gulley Hook


00.07.00.00.660/GHO Gulley Hook - 660mm long x 100mm Square Hook

| www.utsltd.ie13

[Type text]

Stoppers

Pipe Stoppers (No Flow through)

These all-purpose plugs are used for sealing and testing of pipeline tightness with air or water. Multi-size plugs are stretchable therefore only a few plugs are required to cover pipelines of different diameters.

Part Number Pipe Application Range (mm)

000010201 40-70

000010202 70-150

000010203 100-200

000010204 150-300

000010205 200-400

000010206 300-525

000010207 350-600

000010208 375-750

000010209 500-800

000010210 500-1000

000010212 600-1200

000010213 750-1500

000010214 800-1800

Pipe Stoppers (With Flow through)

These all-purpose plugs are used for sealing and testing of pipeline tightness with air or water. Multi-size plugs are stretchable therefore only a few plugs are required to cover pipelines of different diameters.

Part Number Pipe Application Range (mm)

000010611 70-150

000010601 100-200

000010602 150-300

000010603 200-400

000010604 300-525

000010605 350-600

000010606 375-750

000010607 500-800

000010608 500-1000

000010609 600-1200

000010610 750-1500

535030870 800-1800


[Type text]

Stoppers

Inflatable Stopper Accessories


000023900 Air pressure hose 10meter

000033004 Pressure Controller 2.5bar

003350204 Replacement Pressure Guage for Controller 2.5bar 1/4"

000027000 Hand Pump

000021202 Hand Pump adapter to fit packers

Steel Drain Test Plug (Mechanical Stopper)

The plugs are merely inserted into the pipe and the wing nut tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.


00.13.05.00.100/SDP Drain Test Plug - Steel Plates / Brass Wing Nut /

Plastic Cap / ½-inch Outlet / 100mm

00.13.05.00.150/SDP Drain Test Plug - Steel Plates / Brass Wing Nut /

Brass Cap / ½-inch Outlet / 150mm

00.13.10.00.225/SDP Drain Test Plug - Steel Plates / Steel Wing Nut /

Steel Cap / 1-inch Outlet / 225mm





| www.utsltd.ie15

[Type text]

Stoppers

Aluminium Drain Test Plug (Mechanical Stopper)

The plugs are merely inserted into the pipe and the wing nut tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.


00.13.05.00.100/ADP Drain Test Plug - Aluminium Plates / Brass Wing Nut

/ Plastic Cap / ½-inch Outlet / 100mm

00.13.05.00.150/ADP Drain Test Plug - Aluminium Plates / Brass Wing Nut

/ Plastic Cap / ½-inch Outlet / 150mm

00.13.10.00.225/ADP Drain Test Plug - Aluminium Plates / Steel Wing Nut

/ Steel Cap / 1-inch Outlet / 225mm





Original Camstopper

Original Camstopper Drain Test Plug is nylon and is simple to install.


00.13.00.00.100/OCD Camstopper 100mm

00.13.00.00.150/OCD Camstopper 150mm

Remote Installation Device

Remote Installation Device for Camstopper Drain Test Plugs for use with 100/140/150mm Camstoppers


00.13.00.00.332/RID Length from 1.25m up to 3.323m extendable

00.13.00.00.125/RID Length 1.25m long fixed


[Type text]

Drain Tracing & Smoke

NaviTrack Scout® locator

Part Number 19243

Description

A compact locator for cameras and sondes. Graphic Display: • LCD screen.• Automatic depth reading.• Auto backlight.• All the information you need on one screen.• Approaching the target from any direction gives you the same information. Features: • Lightweight only 1,4 kg.• Power source: 4 C batteries.• Battery Life: Approximately 16 hours.• Standard frequencies: Sonde: 512 Hz, 640 Hz, 8 kHz, 33 kHz: Active Line Trace: 512 Hz, 8 kHz, 33 kHz, Passive AC Line Trace: 50 Hz.

Transmitters (Sondes)


16728

Remote Transmitter: Flashing LED indicates that the Sonde is transmitting. Various adapters available to connect to different cables/rods

86246

Adapter for 1/2" jetting hose: Allows the user to propel the sonde up a pipe using a sewer jetting machine - the sonde at the front of the hose can then be traced from above the ground.

Smoke generator

Part Number 0592

Description

With the Smoke Generator 2000, you can easily and quickly locate stench problems and leakages in pipes. The Smoke generator contains a heat element, onto which smoke fluid is applied. The heat will evaporate the liquid and turn it into smoke. A fan will blow the smoke into a pipe, causing overpressure. This way, cracks and holes are easily located. The Smoke Generator comes with – 4x 1 meter pushrods with quick coupling – 6 metres of 50mm plastic hose – 2 litres of smoke fluid (smoke volume = approx 62,500 m3 per litre of fluid) Weight = 19Kg

Drain Tracing Dye – Powder

220g polyjar - Each jar traces up to 15,000 litres of water


00.15.00.00.000/DBL Blue Dye , 220g jar

00.15.00.00.000/DGR Fluorescence Green Dye, 220g jar

00.15.00.00.000/DYE Yellow Dye, 220g jar

00.15.00.00.000/DRE Red Dye, 220g jar

| www.utsltd.ie17

[Type text]

Spring Machines & Hand held Drain Cleaning Equipment

K-3 Toilet Auger

Part Number 59787

Description

This toilet auger is designed for clearing blockages in toilets, the vinyl guard prevents the spring from scratching the porcelain. 3' long

Power Spin

Part Number 88387

Description

Light-duty product for drains to 1-1/2 inches, Comfortable hand grip eases effort, 1/4 inch x 25 feet hollow core cable; Power Spin automatically advances and retrieves cable. Power Spin operates by hand or by adding any variable speed drill.

Kwik-Spin

Part Number 15733

Description

Quickly unclogs sinks, Tubs and Showers The Kwik-Spin hand spinner is designed to quickly and thoroughly clear blockages in sinks, tubs and showers. 25’ MaxCore Cable New durable RIDGID MaxCore kink-resistant cable. Durable Construction The Kwik Spin features a dent and corrosion resistant canister. Wide Handle The wide handle on the Kwik-Spin, provides more comfort and stability. Easily Thread through Crosshairs The RIDGID Kwik-Spin can easily be threaded through sink crosshairs to access the drain opening. 25’ of 1/4" MaxCore kink resistant cable.

K25

Part Number 58890

Description

The professional’s choice for many years, the K-25 Hand Spinner offers premium quality. It’s the ideal tool for the user who demands the best. Premium-quality, precision machined, 3-jaw chuck to firmly secure cable. Loosens/tightens with the flick-of-the-wrist. Cast aluminium ribbed hand grip that won’t slip in your hand. Rotary moulded plastic drum that won’t dent or rust – cleans easily. Equipped with 7.6m of 8mm cable


[Type text]

Spring Machines & Hand held Drain Cleaning Equipment

K-45 AF Drain Cleaner with Auto Feed

Part Number 35473

Description

The Professionals choice for clearing drains from ¾” to 2 ½”. Variable speed control 0 – 600 RPM to give you complete control of every situation. Inner drum prevents leaks to keep jobsite clean – no drips from the cable. The advanced 2-Way autofeed lets you clean drains better and faster than ever before – keeps hands off the cable and gives you total control to completely work through blockages and retrieve obstructions. Comes with 5/16th x 25’ Cable with bulb Auger. Other tool heads and accessories available upon request

K-400 Drum Machine - 230 Volt

Part Number 28103

Description

For Line up to 4" up to 30m long. Integrated transport cart, Telescopic handle, Autofeed, front guide hose, Air Actuated footswitch, complete with gloves, toolset (Bulb Auger, C cutter, Spade Cutter, Pin Key), cable 12mm x 23m long, weight approx 42 Kg

K-750 Drum Machine - 230 Volt

Part Number 44152

Description

For Line 4" to 8" cable drum capacity up to 61m long. Integrated transport cart, Autofeed, front guide hose, Air Actuated footswitch, complete with gloves, toolset (Spear Blade cutter, retrieving auger, 50mm cutter, 75mm cutter,100mm cutter), cable 20mm x 23m long, weight approx 100 Kg

KJ-1590Electric Water Jetter

Part Number 35511

Description

For lines up to 6". 15 l/min Max pressure 90 Bar. Powerful 2.2Kw electric motor. Triple plunger pump with PULSE ACTION (helps jet travel further and around bends). Convenient cable storage, Integrated transport cart. Heavy

duty steel hose reel with 20m of 1/4" hose

(58436) Propulsion Nozzles 1/4" • General purpose nozzle that works well in most applications. Features three reverse thrusters for maximum propulsion

to jet long distances.

(58446)Penetrating Nozzles 1/4" • Penetrating nozzle features an additional forward pointing jet that blasts a hole in solid ice or sludge blockages. Three

reverse jets provide propulsion.

| www.utsltd.ie19

[Type text]

Safety Equipment

LED Safety Beacon Set

Part Number A00167

Description

The amazing new LED Safety Beacon can cater to the needs of many end users, from emergency services at the scene of an accident to construction & engineering crews working on roads and motorways or simply keeping one in your car or truck in case of a breakdown, this unit is an absolute must. FEATURES: Emits 360° of ultra-bright light from an array of 16 LEDs, Visible for up to 12 Km away, Strong enough to withstand being run over by trucks at Motorway Speeds, Magnetic base, Rechargeable, User selectable 10 Flash Patterns, 120mm Diameter x 35 High & Weighs less than 200g, Includes Charger (Mains & Cigarette plug).

Telescopic Safety Guide Tube Used to safely insert jetting nozzle into outgoing pipes in surcharged

chambers 1 ¾" internal diameter suitable for most Vanpack and Trailer Jetting Hoses.


00.12.06.10.000/TGT Telescopic Guide Tube 6-10ft


Pressure Testing

Pressure Testing equipment

Our comprehensive range of quality equipment manufactured by Sklarz in Germany can be configured to carry our various tests with data recording such as:

Pipe length water test Pipe length air test Invert Channel test Manhole/Separator Test Manhole vacuum test High Pressure Test Lateral line tests Pipe Joint testing

The tests are carried out in accordance with predefined standards stored in the test unit library e.g EN1610


[Type text]

Jetting Accessories

Tigertail

The Tigertail Protects the jetting hose and camera cable form damage as it enters the sewer, This is a vital piece of equipment to ensure long service life from Hose and cables


00.12.02.00.000/TTA 2” Tigertail with rope

00.12.03.00.000/TTA 3” Tigertail with rope

Top Roller

Part Number 8 011 001 000 000

Description

The Top Roller Protects the jetting hose and camera cable form damage as it enters the manhole, The frame is constructed from stainless steel. This is a vital piece of equipment to ensure long service life from Hose and cables

Lower Hose/Cable Roller

The Hose/Cable Roller Protects the jetting hose and camera cable form damage as it enters the sewer, This is a vital piece of equipment to ensure long service life from Hose and cables. The frame is very strong to cope with the forces from the jetting hose. The rollers allow the hose/cable to pass with minimum friction thus helping the jet head or camera to travel further up the pipe


8 010 001 014 012 Lower hose guide 1/4" - 1/2" hose/cable size

8 010 002 034 100 Lower hose guide 3/4" - 1" hose/cable size

8 010 003 100 114 Lower hose guide 1" - 11/4" hose/cable size

Silt Catcher for Drain Jetting

Lower the silt catcher into the channel of the manhole using the Rod fitting or rope loop. The debris and silt pulled back to the manhole while jetting will enter the silt catcher. The silt catcher can be easily lifted out and emptied making this a very quick, easy and safe way to remove debris from manhole after jetting.


00.04.00.00.100/STR Silt Catcher – 100mm (4”) for catching silt and debris

during drain jetting

00.04.00.00.150/STR Silt Catcher – 150mm (6”) for catching silt and debris

during drain jetting

| www.utsltd.ie21

[Type text]

Jetting Accessories

Telescopic Safety Guide Tube Used to safely insert jetting nozzle into outgoing pipes in surcharged

chambers 1 ¾" internal diameter suitable for most Vanpack and Trailer Jetting Hoses.




Jetting Nozzles

Below is a selection of our most frequently used nozzles, our full range of nozzles is too large to print in this catalogue, if you do not see the type of nozzle you are looking for in the following pages please contact us and we would be happy to discuss your requirements. When placing an order please provide us with the following information for calibration purposes

1. Pump water Flow rate 2. Pump pressure 3. Jetting hose length 4. Jetting hose material (rubber/thermoplastic) 5. Jetting hose diameter

House Connection Set Pro

This set is designed for use in smaller diameter pipes up to approx 100mm. The highly flexible hose easily negotiated multiple bends.

Part Number Size Description

HS-CN-SET PRO ¼” Complete set containing the items listed below.

¼” Pilz nozzle with all rear jets

¼” Pilz nozzle with rear jets and 1 front jet

¼” Tristar with 6 rear jets and 3 front jets

¼” RDS Type B/C spinning nozzle

½” 1/2" to 1/4" reducer

¼” 1/4" flex hose, 20m long

Standard Drain Jetting Nozzles


161640 3/8” Drilled nozzle with rear jets

161630 3/8” Drilled nozzle with rear jets and 1 front jet

16110 ½” Drilled nozzle with rear jets

16010 ½” Drilled nozzle with rear jets and 1 front jet


[Type text]

Jetting Nozzles

Plumber Line Nozzle set These high quality nozzles are produced to the highest standards and are

hardened to ensure the maximum length of service live. The nozzles are smaller and lighter, so that they will get easily around bends even in relined pipes. These nozzles also have ceramic inserts to ensure high efficiency and a long service life


PLM-NZ-SET ½” Complete set containing the 5 nozzles listed below, cost saving when purchased as set.

53 01 01 01 4 06 10 ½” HW 35, 6x10o, De-silting & general cleaning

53 02 01 01 4 06 25 ½” Wiesel 32, 6x25o, General cleaning, travels easily around bends

53 03 01 01 4 06 20 ½” Tristar 28 - 6 rear 4 front - blockage removal

53 04 01 01 4 03 15 ½” Rondo 35 – 360o fan jet - full pipe wall cleaning, grease removal etc.

53 05 01 01 4 06 15

½” Mega 3 - Floor cleaner, removal of heavy silt even in larger pipes

Wiesel

The Wiesel K28 nozzles manufactured in hardened alloy steel are designed for general pipe cleaning requirements. Applications: Small pipes with limestone, soap and grease build-up. General pipe cleaning.


06 04 05 XX 3 YY ZZ 3/8” Wiesel, drilled rear jets with optional front jet

06 04 01 XX 4 YY ZZ ½” Wiesel, drilled rear jets with optional front jet

06 04 02 XX 5 YY ZZ ¾” Wiesel, drilled rear jets with optional front jet

06 04 03 XX 6 YY ZZ 1” Wiesel, drilled rear jets with optional front jet

Tristar

The TriStar Nozzles, manufactured in hardened alloy steel and ceramic inserts, with four front jets, are designed for high penetration power when it is crucial to break through blocked material. Applications: Removal of heavy blockages, roots and deposits,


01 06 01 01 4 06 04 ½” Tristar blockage nozzle

01 06 02 01 5 06 04 ¾” Tristar blockage nozzle

01 06 03 01 6 06 04 1” Tristar blockage nozzle

01 06 04 01 7 06 04 1 ¼” Tristar blockage nozzle

01 06 05 01 8 12 04 1 ½” Tristar blockage nozzle

| www.utsltd.ie23

[Type text]

Jetting Nozzles

Universal Cleaning Nozzles

This series of nozzles are manufactured in hardened alloy steel or stainless steel, the shape of the nozzle allows for easy penetration through tight elbows and easy retrieval. Applications: Cleaning of pipes where high thrust is required. Pipes with sharp turns and/or heavy build up.


01 05 01 01 4 05 25 ½” Gigant, 5 ceramic rear jets

01 04 01 01 5 06 25 ¾” Enorm, 6 ceramic rear jets

01 02 01 01 6 08 33 1” Dracula, 8 ceramic rear jets

01 02 01 01 6 08 33 1 ¼” Dracula, 8 ceramic rear jets

HW Series Bomb Nozzles These high efficiency nozzles are manufactured for highly soiled pipes with a

high feed performance, set new standards in sewer cleaning. The high efficiency makes it possible to transform water energy into cleaning, and forward drive output. Because of the enclosed nozzle inserts and the use of hardened alloy steel and ceramic inserts the service life is very long. Applications: General pipe cleaning, sand and Sludge removal.


06 03 01 01 4 06 06 ½” HW70 with 6 rear jets, 6o & 12o

06 03 01 02 5 06 06 ¾” HW70 with 6 rear jets, 6o & 12o

06 03 02 01 6 08 06 1” HW75 with 8 rear jets, 6o & 12o

06 03 03 01 6 10 06 1” HW100 with 10 rear jets, 6o & 12o

06 03 06 01 6 12 12 1” HW110 with 12 rear jets,12o & 18o

06 03 04 01 7 10 06 1 ¼” HW100 with 10 rear jets, 6o & 12o

06 03 06 01 7 12 12 1 ¼” HW110 with 12 rear jets, 12o & 18o

06 02 01 02 7 12 20 1 ¼” BK with 12 rear jets, 20o & 30o

MEGA Series

The "Mega" series nozzles are designed with heavy weight in order to provide for maximum penetrating effect on mud, sand and various sediments. Applications: Various Profiles. Breaking- up and removal of material.


53 05 01 01 4 06 12 ½” Mega 3 with 6 rear jets and SS swivel

10 06 01 01 5 07 07 ¾” Mega 5 with 7 rear jets and SS swivel

10 06 01 01 5 07 07 1” Mega 5 with 7 rear jets and SS swivel



10 02 03 02 7 11 08 1 ¼” Mega 6 with 11 rear jets and SS swivel

10 03 03 02 7 08 05 1 ¼” Mega 8 with 8 rear jets and SS swivel


[Type text]

Jetting Nozzles

RONDO

The "Rondo" series nozzles perform the same cleaning results of the rotating nozzles without losing impact force due to the spinning effect. The fan-jets always give 360° of coverage uniformly throughout the inside of the pipe. This is an excellent nozzle for the removal of grease and also for use prior to a CCTV survey as the fan-jet will not leave any streaks on the wall of the pipe. Applications: removal of soap, grease, bitumen. Thorough cleaning prior to CCTV inspection.


53 04 01 01 4 03 15 ½” RONDO 35 - SF 3.6

03 00 01 01 4 06 45 ½” RONDO 40 - SF 6.0

03 00 01 01 4 09 45 ½” RONDO 40 - SF 9.6

03 00 02 01 5 13 45 ¾” RONDO 50 - SF 12.8

03 00 03 01 6 27 45 1” RONDO 60 - SF 27

03 00 04 01 7 36 45 1 ¼” RONDO 90 - SF 36

Vibration Nozzles

Roto Jiggler - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems (not to be used in Clay or Stoneware Pipes) RDS-V - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. Applications: Pipes with heavy Blockage (not to be used in Clay or Stoneware Pipes) RuMax - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. High power turbine driven vibration nozzle(not to be used in Clay or Stoneware Pipes)







Avanti Rotation Nozzle

The Avanti was specially invented to free sewer pipes from ice, but it can also be used to remove similar deposits, such as small roots, mineral deposits etc. Applications: Ice, light roots, mineral deposits


02 03 01 01 4 03 04 ½” Avanti

02 03 01 01 4 03 04 ¾” Avanti

02 03 03 01 6 04 06 1” Avanti

[Type text]

Vibration Nozzles Roto Jiggler - removal of mineral deposits, concrete, slag, building material

or comparable substances in pipe and sewer systems (not to be used in Clay or Stoneware Pipes) RDS-V - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. Applications: Pipes with heavy Blockage (not to be used in Clay or Stoneware Pipes) RuMax - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. High power turbine driven vibration nozzle(not to be used in Clay or Stoneware Pipes)


05 03 02 01 4 06 02 ½” RotorJiggler Vibration Nozzle

05 03 03 01 5 06 02 ¾” RotorJiggler Vibration Nozzle

02 04 02 01 5 02 06 ¾” RDS-V Vibration Nozzle

02 04 03 01 6 02 06 1” RDS-V Vibration Nozzle

05 02 02 01 6 06 00 1” RuMax Vibration Nozzle

[Type text]

Jetting Nozzles

RONDO

The "Rondo" series nozzles perform the same cleaning results of the rotating nozzles without losing impact force due to the spinning effect. The fan-jets always give 360° of coverage uniformly throughout the inside of the pipe. This is an excellent nozzle for the removal of grease and also for use prior to a CCTV survey as the fan-jet will not leave any streaks on the wall of the pipe. Applications: removal of soap, grease, bitumen. Thorough cleaning prior to CCTV inspection.


53 04 01 01 4 03 15 ½” RONDO 35 - SF 3.6

03 00 01 01 4 06 45 ½” RONDO 40 - SF 6.0

03 00 01 01 4 09 45 ½” RONDO 40 - SF 9.6

03 00 02 01 5 13 45 ¾” RONDO 50 - SF 12.8

03 00 03 01 6 27 45 1” RONDO 60 - SF 27

03 00 04 01 7 36 45 1 ¼” RONDO 90 - SF 36

Vibration Nozzles

Roto Jiggler - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems (not to be used in Clay or Stoneware Pipes) RDS-V - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. Applications: Pipes with heavy Blockage (not to be used in Clay or Stoneware Pipes) RuMax - removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. High power turbine driven vibration nozzle(not to be used in Clay or Stoneware Pipes)







Avanti Rotation Nozzle

The Avanti was specially invented to free sewer pipes from ice, but it can also be used to remove similar deposits, such as small roots, mineral deposits etc. Applications: Ice, light roots, mineral deposits


02 03 01 01 4 03 04 ½” Avanti

02 03 01 01 4 03 04 ¾” Avanti

02 03 03 01 6 04 06 1” Avanti

| www.utsltd.ie25

[Type text]

Jetting Nozzles

RDS Rotation Nozzles

The RDS series nozzles are very effective tools for cleaning of pipes. The rotating element and jets scour the surface of the pipes loosening hard debris. Applications: Removal of grease, mineral deposits, limestone.


02 00 01 01 4 04 06 ½” RDS Type A - Standard

02 00 01 02 4 04 06 ½” RDS Type B/C - Increased cleaning power

02 00 02 01 5 04 06 ¾” RDS Type A - Standard

02 00 02 02 5 04 06 ¾” RDS Type B/C - Increased cleaning power

02 00 03 01 6 04 06 1” RDS Type A - Standard

02 00 03 02 6 04 06 1” RDS Type B/C - Increased cleaning power

02 00 04 01 7 04 06 1 ¼” RDS Type A - Standard

02 00 04 02 7 04 06 1 ¼” RDS Type B/C - Increased cleaning power

RotoMax – Slow Rotation Nozzle

This slow rotation nozzle ensures that the maximum amount of the water power is directed to the blockage/pipe wall and puts the user as well as the receiver of service in a position to solve even the most complicated problems. Applications: Removal of grease, mineral deposits, limestone


02 01 01 01 4 04 06 ½” RotoMax 50

02 01 01 03 5 04 06 ¾” RotoMax 50

02 01 02 01 6 06 06 1” RotoMax 80

02 01 03 01 7 06 06 1 ¼” RotoMax 110

EEL Cutter Set

The precise and variously usable tool made out of Case hardened steel is suitable for the removal of deposits and roots. The design of the cage allows the cutter to travel through curved pipes or other obstructions where standard cages would not pass. Applications: Removal of Deposits and Roots


16 03 001 ½” EEL Set with Chains, and cages for 100mm to 150mm (other sizes by request)

16 03 002 ¾” EEL Set with Chains, and cages for 100mm to 150mm (other sizes by request)

16 03 003 1” EEL Set with Chains, and cages for 125mm to 200mm (other sizes by request)


[Type text]

Jetting Nozzles

Combi-Chain Rotor & Combi-Chain Rotor Recycling

IBG produces this chain rotating nozzle in different variations with accessories such as the centre knife shown in the picture. The combi chain rotor can be used with either bicycle chain or link chains depending on the application, Should be used with centering cage. Applications: Removal of deposits and roots


16 14 001 001 ½” CCR Set, Complete in case with middle-knife, double-roller-chains DN 100-250, and tools.

16 14 002 001 ¾” CCR Set, Complete in case with middle-knife, double-roller-chains DN 100-250, and tools

8 005 004 001 000 Link chain set and holders for 100mm to 250mm, suitable for 1/2" or 3/4" CCR Nozzles

16 14 003 001 1” CCR Set, Complete in case with middle-knife, double-roller-chains DN 200-400, and tools.

16 14 004 001 1 ¼” CCR Set, Complete in case with middle-knife, double-roller-chains DN 200-400, and tools.

8 005 004 002 000 Link chain set and holders for 200mm to 400mm, suitable for 1" or 1 1/4" CCR Nozzles

16 15 003 001

1” CCR-Recycling, Complete in case with middle-knife, double-roller-chains DN 200-400, tools and spare oil.

16 15 004 001

1 ¼” CCR-Recycling, Complete in case with middle-knife, double-roller-chains DN 200-400, tools and spare oil.

8 007 111 001 000 Link chain set and holders for 200mm to 400mm, suitable for 1" or 1 1/4" CCR-Recycling Nozzles

Guide Cages

The VariTurn and VariCage are especially designed to guide the Chain rotors, RotoJet, RotoMax and Rondo centrally through the pipes. Applications: Centering the nozzle in the sewer pipe. VariTurn is infinitely adjustable within its range while the VariCage is adjustable at pre drilled intervals.


8 012 001 010 020 ½” VariCage 100-200mm

8 012 002 020 045 1” VariCage 200-450mm

8 012 003 020 060 1 ¼” VariCage 200-600mm

8 012 006 015 040 1” VariTurn 150-400mm

8 012 007 030 060 1 ¼” VariTurn 300-600mm

8 012 008 050 090 1 ¼” VariTurn 500-900mm

8 012 011 050 120 1 ¼” VariTurn 500-1200mm

8 012 012 050 200 1 ¼” VariTurn 500-2000mm

| www.utsltd.ie27

[Type text]

Drain Jetting : Van Packs, Trailer and Combi units

Underground Technical Services Ltd. is the authorised dealer and service centre for ROM bv. ROM bv is based in Holland and have been in business for over 30 years. The company has built a strong reputation for manufacturing high quality and innovative products, coupled with high quality after sales service and has established itself as one of the leading manufacturers in this sector in Europe. Below you will find a brief overview of some of the products we offer from the ROM product range.

ROM COMPACT

Compact design and light weight allows installation even in small and medium vans. Available in petrol & diesel configurations, various options available such as wireless remote control. Pressures up to 150 bar and flow rates up to 60 l/min.

ROM COMPACT PRO

Compact design and light weight allows installation even in small and medium vans. Kubota diesel engine, comes with many features as standard such as hydraulic reel and larger water tank, various options available such as wireless remote control. Pressures up to 200 bar and flow rates up to 75 l/min

ROM ECONOMIC Compact, lightweight and optimal comfort. This characterises

the new ROM EcoNomic. Add to this the very attractive price and you have made your choice. You benefit from the latest technology, such as our iROM control and the unique 180o swivelling hydraulic high pressure hose reel with hinged guiding system and rotating control panel. Pressures up to 200 bar and flow rates up to 100 l/min.

ROM ECOFIT

The ROM ECOFIT is one of the most advanced skid-mounted sewer jetting machines available. The ECOFIT features a swing out reel and control unit, with hose reel swivel of 270o for easy setup even on difficult to access manholes. Pressures up to 250 Bar and flow rates up to 100 l/min

Sales • Support • Solutions |

[Type text]

Drain Jetting : Van Packs, Trailer and Combi units

ROM SmartTrailer

The world's most compact and most sharply priced sewer cleaning trailer. The ROM SmartTrailer sewer jetting trailer combines utility with simplicity and reliability. Ideal for sewer cleaners, installation companies, plumbers and municipalities. Pressures up to 190 Bar and flow rates up to 50 l/min

ROM 500

The ROM 500 is available with a petrol and diesel engine. The unique stylish design together with the proven ROM-techniques, make the ROM 500 a valuable asset to your company or municipality. Besides this extensive basic version, you can now select a wide range of options and accessories. Pressures up to 200 Bar and flow rates up to 60 l/min

ROM 900

Its attractive design and exceptionally complete range of equipment make the new ROM 900 distinct from all other sewer cleaning trailers. The low centre of gravity ensures maximum stability when driving. Swing out reel and control unit, with hose reel swivel of 270o for easy setup even on difficult to access manholes. Besides the extensive basic version, you can now select a wide range of options and accessories. Pressures up to 200 Bar and flow rates up to 100 l/min

SmartCombi (3.5 – 4.6 ton)

The ROM SmartCombi is Europe's most compact, lightweight and sharply priced design combi. The combined high pressure / vacuum pick-up unit is easily mountable on chassis (3,5 to 4,6 tons), twin axle trailer or open body truck. The durable design is extremely compact and manoeuvrable and therefore perfect for use in city centres and parking areas. Several tank split options available, 140 Bar 60 l/min.

SmartCombi PRO (6 – 7.5 ton) The ROM SmartCombi PRO version offers you, extra vacuum

suction power and more flushing and cleaning capacity, and many other extras. The combined high pressure / vacuum unit is suitable for vehicles from 6 to 7.5 tons. The durable design is extremely compact and manoeuvrable and therefore perfect for use in city centres and parking areas. Several tank split options available, Pressures up to 200 Bar flow rates up to 100 l/min.

28

| www.utsltd.ie29

[Type text]

Sewer Trucks, Recyclers, Tankers

We offer a wide range of sewer cleaning trucks, tankers and recyclers. The following are a few examples. Please contact us with your requirements.


[Type text]

Pushrod Camera Systems & Accessories

Our pushrod camera systems & accessories are manufactured by minCam in Germany. We have a wide range of systems and variants available, below is a brief overview of our standard range. If you have other requirements please contact us, we have the expertise and equipment available to allow us supply custom solutions also.

minCam360

Pan & Tilt pushrod camera system with integrated digital recorder, text generator, “hot swappable” battery packs. Remote control and much more.

Combo Pro

Our most popular system and comes complete with all features needed to carry out high quality surveys with ease. Extremely tough construction, ultra bright lighting, integrated digital video recording, battery packs, text generator, sonde and much more. Standard rod length of 60m, (other lengths available upon request) recommended pipe range 75mm to 375mm

eCam29

Perfect cost effective solution for pipe inspection. 29mm camera head, 30m of push rod, application range 40mm to 150mm. Compact and lightweight for easy storage and transport.

minCord

Miniature camera system with integrated battery pack and digital video recorder. Perfect for inspection of small diameter pipes even with multiple bends. 13mm camera head, 15m push-pull cable, application range of 15mm to 50mm

minDVR

Portable and rugged Digital Video Recorder. Battery powered with 3.5” screen. Can be used to record PAL or NTSC video surveys from any camera system with a video out connector

Pushrod Camera Systems & Accessories

| www.utsltd.ie31

[Type text]

Mainline Camera Systems

The team at Underground Technical Services Ltd has many years experience servicing and maintaining various types of inspection systems. We have learned a lot over all those years and kept this in mind when deciding which inspection system we wanted to offer to our customers. Rausch has ticked all the boxes for us, why not give us a call and see how our Rausch equipment can “tick all the boxes” for you too. Below you will get a brief snapshot of what we have to offer from Rausch, further information is available at www.utsltd.ie. Crawler camera inspection from 100mm to 3000mm High quality camera heads with pan, tilt, zoom Laser 3D pipe profiling Lateral inspection from the main line Later jetting from the main line Pressure testing


[Type text]

Robotic Cutters

The IBG HydroCut range of robotic cutters are a high performance cutter system designed with maximum production and ease of use in mind. The owner of a HydroCut system will benefit from: High production due to very high powered water hydraulic

cutter motor. Multiple onboard cameras for fast accurate cutting Rugged and durable construction. Easy onsite maintenance to minimise downtime Many interchangeable models to choose from. Local Expert support and spares

Contact us to discuss you requirements

Sewer Repair

Our Trelleborg- epros® DrainSystems range covers almost the entire scope of necessary and renovation measures in a pipe system. There are sophisticated and certified rehabilitation solutions to almost any problem. Below you will find a brief overview of some of the rehabilitation solutions we have to offer.

Sectional Point Repair System Method for the sectional renovation of damaged buried sewer

pipes between DN 35 and DN 1200 by means of short and long liners

Full Length Lining Full-Length Sewer Rehabilitation of Main- and House Sewer

DN 30 - DN 1000 by Inversion method

Lateral Connection Repair (LCR-S)

Method for the Sectional Renovation of Lateral Junctions and Pipes in the Main Sewer Line Main pipe: DN 130 to DN 600 Lateral pipe: DN 100, 125, 150 and 200 at 30° to 90°

| www.utsltd.ie33

[Type text]

After Sales Support & Service

After sales support and service is at the very core of our company and is something we take very seriously. Having your equipment serviced by us means that you can count on our high level of technical ability, training and knowledge to ensure that the work is done to the highest standards and you receive the highest level of care and attention. The Team at Underground Technical Services Ltd. always aims to get the job done as efficiently and economically as possible therefore minimising the amount of downtime you have to experience. In order to facilitate this, both our electronics’ and mechanical workshops are equipped with the latest tools and equipment for this specialised type of work and we also hold a high level of stock for the repair of various drain cleaning, inspection and rehabilitation equipment. We offer:

Service and Repair of Drain Cleaning Machines: Van Packs, Trailer Jetters, Vac units, Jet-Vacs & Recyclers

Service and Repair of CCTV Inspection Systems: Mainline CCTV systems, Pushrod systems

Service and Repair of Drain Rehabilitation Systems: Robotic cutters, Lining equipment, packers

Calibration of existing jetting nozzles Custom Design and Modification Through many years of working in the industry we have come up against many problems and have found solutions to overcome those problems. Contact us with any special requirements that you may have – we are confident that we will find a solution for you.

Service Contracts & Preventative Maintenance We offer Preventative Maintenance & Service Contracts - we assess your fleet of equipment and machines and draw up a schedule of service. This allows you to get better control of your maintenance costs, minimise downtime and increase reliability. Call us to discuss your needs.

Electronics WorkshopElectronics Service Department Mechanical Service Department

| www.utsltd.ie

Unit 46 Broomhill Close, Tallaght, Dublin 24

Tel: +353 (0)1 463 5000 | Fax: +353 (0)1 463 5001

Email: [email protected]

SAT NAV (GPS) CoordinatesLatitude 53°17’44.30”N

Longitude 6°21’51.68”W

Where to find us...

Sewer Cleaning Vehicles & Equipment

Drain Inspection Camera systems and software

Sewer Repair Equipment & Materials

Pipe Testing & Leak Detection

Tools & Accessories

www.utsltd.ie

tools & equipment catalogue - uts ltdutsltd.ie/wp...tools-equipment-catalogue-low-res.pdf ·...

Documents