lubricantsagrinol.ua/ref_book_en.pdfwith gost 23652-79 ..... 32 agrinol transmission oils ..... 34...

www.agrinol.ua

LUBRICANTS

REFERENCE BOOK

OILS, GEASES, CAR CARE Production Reference Book. First edition (supplemented and revised) / Edited by Candidate of Chemical Sciences V. I. Gumenniy — “Agrinol”, 2016 (№2) — 166 p.

The reference book contains brief information about the purpose, fields of use and normative quality indices of the lubricants produced by the Limited Liability Company “Agrinol”. The reference book can be used as a guide to choose and utilize the association’s production.

© RU SIE “Agrinol”, 2016

“Agrinol” specializes in the production of such lubricating materials as lubricants, oils, lubricating and cooling liquids (LCL) and steel drums. The introduction of new technologies and the improvement of the already existing ones by modernizing the equipment and utilizing new materials, highly qualified specialists and the quality management system ISO 9001 – 2009 (ISO 9001:2008) enable the enterprise to manufacture products of high quality that corresponds to the requirements of Ukrainian and foreign consumers. The oils, greases and LCL produced by RU SIE “Agrinol” are widely used at enterprises of concentrating, metallurgical and power supply complexes as well as in mechanical engineering, transport, and agricultural sector in 35 countries.

On the basis of the modern control and analytical laboratory accredited in accordance with ISO17025:2006, as well as the experimental laboratory in the association, constant effort is being made to increase the range and quality of product that helps to ensure the fullest satisfaction of the requirements of specific consumers.

This enables our enterprise to guarantee the best satisfaction of specific consumers’ requirements.

“Agrinol” is always opened to mutual beneficial collaboration with all the enterprises and organizations interested in the development, industrial production assimilation and application of new types of lubricating products.

A structural subdivision forms a part of the company produces metal drums for petroleum, chemicals, food and other products. Manufacturing takes place in modern production lines, which provides along with high product quality, competitive price packaging. The range of packaging meets state standards, specifications and UN international rules for transport of dangerous goods.

The reference book contains brief information about the purpose, fields of use and normative quality indices of the lubricants produced by the Agrinol. The reference book can be used as a guide to choose and utilize the association’s production.

For further information, please, visit our web-site:www.agrinol.ua

LLC “RU SIE Agrinol”71100, Ukraine, Berdyansk,84/1, Melitopolskoe shosse. tel. +38 (06153) 60-600

REFERENCE BOOK

4

C

onte

nts

Contents

Contents ........................................................................4

OILS ..............................................................7

Agrinol universal multigrade motor oils ..9

Oils for automotive diesels ............................15

Universal mineral motor oils ........................20

Oils for 2- and 4-stroke engines of small machinery ....................................................21

Oils for marine and locomotive engines 23

Chain Saw Oil ........................................................24

Oils for marine and locomotive engines 26

Transmission oils ..................................................30Transmission oils in accordance with GOST 23652-79 .................................... 32Agrinol Transmission oils ...........................34Transmission oils for industrial an obsolete equipment .....................................36Automatic transmission fluid ...................37

Universal oils for automotive diesels ......38

Oils for hydromechanical transmissions 40

Hydraulic oils ..........................................................41Low-temperature oils .................................. 41Turbine oils according to GOST 9972-74, GOST 10289-79 ........................... 42

Power oils ..................................................................42Kompressoil VG ..............................................44Compressor oils for gas-transit units .... 47Тransformer oils ............................................49Cable oils .......................................................... 51

Industrial oils ..........................................................52

Hydraulic oils of premium group ............ 53Zinc-free hydraulic oils of premium group ..................................................................56Gear oils premium group............................ 57For rolling mills ............................................. 59Oils for slideways .......................................... 61Oils for liquid friction bearings ............... 62General purpose oils ....................................64Industrial petroleum oils ........................... 65Vacuum oils ..................................................... 71Oil heat transfer fluid ..................................72Flushing oils ....................................................73Conservative oils ........................................... 74Release agent Form Divider ...................... 75Instrumental oils ........................................... 76

GREASE .................................................... 79

General-purpose lubricants for standard temperatures .....................................81

General-purpose lubricants ..........................84

Automotive lubricants.......................................85

Multi-purpose lubricants .................................87

for standard and high temperatures ........91Water-resistant ............................................... 92

Industrial lubricants ...........................................92Metal-plating lubricants ..........................105Industrial lubricants for rolling mills ..106

Railway Greases .................................................. 107

Heat-resistant greases.....................................111

Chemically resistant lubricants .................116

ContentsREFERENCE BOOK

5

C

onte

nts

Drilling lubricants ..............................................118

Low-temperature lubricants .......................119

Rope greases ........................................................ 120

Instrumental lubricants ................................. 123

Marine lubricants ...............................................124

Consrevation (protective) lubricants .... 125

Sealing lubricants ............................................. 126

Reducer lubricants (semi-fl uid) ................ 128

Brake- in pastes .................................................. 129

Insulation lubricants ....................................... 130

TECHNOLOGICAL COOLING LUBRICANTS .......................................133

Oil coolants ............................................................135

Water-based cooling lubricants ............... 137

AUTO CHEMISTRY ............................145

Cooling liquids ....................................................147

Windshield fl uids ................................................149

METAL PACKING ................................151

Production of metal packing with the logo ...........................................................152Painting of metal DRUMS ........................152

Metal packing ...................................................... 152

Steel drum, tight-head type 1A1L 216,5 dm3 .................................................................153

Steel drum, open-head type 1A2L 213 dm3 .....................................................................153

Drum CD-1A2 18 20 dm³ .............................. 154

Correspondence table products ................155

Annex .........................................................................161

Index .......................................................................... 162

REFERENCE BOOK

8

OIL

S

Specialists of the “Agrinol” company developed line of motor oils, adapted to the domestic conditions of mobile equipment operation. These oils contain specially selected and balanced components which actively cleanse and protect engine parts from deposits and sludge. The range of Agrinol SAE motor oils includes PREMIUM class oils for modern cars, cargo, passenger and road-construction vehicles, which are working under the heavy loads; and also oils of STANDART class for the older models.

New generation transmission oils “Transmission” and automatic transmission fluid (ATF) include both mineral and synthetic oils that are intended for use in extreme conditions where increased antioxidant and EP properties are needed.

“Agrinol” company produces a full range of traditional lubricants along with high-tech, synthetic and semi-synthetic lubricants for the last generation automotive technique.

REFERENCE BOOK

9

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

Agrinol universal multigrade motor oils

TS U 23.2-30802090-085:2009

Agrinol 5W 30 SL/CF — fuel economy low-viscosity synthetic universal oil for gasoline and diesel engines of a new generation, adjusted to requirements for architecture of engine with temperate emissions and low friction, including turbocharged, multivalve engines and engines equipped with devices pre-treatment of exhaust gases operated under the regime of "start-stop" and the conditions of urban traffic.

Agrinol 5W 30 SM/CF — fuel economy low-viscosity synthetic oil for lubrication of all gasoline and diesel engines (including turbocharged, multivalve, direct injection), as well as for cars and off-road vehicles, gas-fueled, in which must apply low viscosity and a low friction oil.

Agrinol 5W 40 SN/CF — Universal synthetic oil of new generation, recommended for modern high-augmented gasoline engines with turbocharging and diesel engines with supercharge of cars, minibuses and light trucks of European, American and Japanese manufacturers, sport cars, as well as 4-strokes gasoline engines on motorbikes. Oil increases the efficiency of fuel consumption while maintaining engine power.

Perfomance level:Agrinol 5W-30 SL/CF FUEL ECONOMY (ACEA A3 / B4 / C3, API SL/CF)VW 502.00 / 505.00, Ford WSS-M2C913-C / WSS-M2C913-D, BMW LL-01 FE, ACEA A3 / B4 / C3

Agrinol 5W-30 SM/CF FUEL ECONOMY (ACEA А5 / В5, API SM/CF)VW 502.00 / 505.00, Ford WSS-M2C913-C / WSS-M2C913-D, BMW LL-01 FE, ACEA А5 / В5

Agrinol 5W-40 SN/CF PREMIUM (ACEA А3 / В3 / В4, API SN/CF)BMW LL-01, MB-229.5, Porsche A40, VW 502.00 / 505.00, Renault RN 0700 / 0710, ACEA А3 / В3 / В4

Index name 5W-30 SL/CF 5W-30 SM/CF 5W-40 SN / CF

Temperature range –30 ... +30 –30 ... +40

Kinematic viscosity at 100°С, mm2/s 9,3-12,5 12,5-16,3

Viscosity index, not less than 150 145 160

TBN, mg КОН/g, not less than 6,5 8,0 7,0

Sulphated ash, %,not more than 1,2 1,3

Temperature, °С:• Open cup fl ash point, °С, not less

than• Pour point, not more than

205–35

200–35

205–36

Color, CNT units, not more than 3,0

Mass fraction of the active elements, %, not less than: • Calcium• Zinc

0,250,1

0,20,1

0,280,1

Agrinol universal multigrade motor oilsREFERENCE BOOK

10

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

TS U 23.2-30802090-085:2009

Agrinol 5W-40 SL/CF, CG-4/SJ — universal synthetic motor oils, intended for use in modern gasoline and diesel engines of cars, trucks and off-road equipment, operating in any environmental conditions and with extreme type of driving (highlands, “start-stop” mode, sport style).

Agrinol 10W-40 SL/CF, CG-4/SJ — universal semi-synthetic motor oil intended for all types of modern diesel and gasoline engines of cars and minibuses (including turbocharged engines and catalyst). It is an optimal decision for mixed fleets.

SL/CF oils are used in engines operating on fuel with a sulfur content of 0.5% of the mass and above.

Perfomance level:Agrinol 5W-40 SL/CF PREMIUM (ACEA А3/B4, API SL/CF)VW 502.00/505.00, Porsche A40, BMW LL-01, PSA B71 2296, Renault RN0710/RN0700, MB-229.5

Agrinol 5W-40 CG-4/SJ PREMIUM-DIESEL (ACEA E3-96/B3-96/A2-96, API CG-4/SJ)MB-228.1, VW 501.01/ 505.00

Agrinol 10W-40 SL/CF OPTIMAL (ACEA А3/B4, API SL/CF)BMW LL-98, MB-229.1, VW 502.00/505.00

Agrinol 10W-40 CG-4/SJ HP-DIESEL (ACEA E3-96/B3-96/A2-96, API CG-4/SJ)MB-228.1/228.3, VW 501.01/505.00, MAN 271, 3275, Volvo VDS/VDS-2, ЯМЗ-4-02

Index nameAgrinol 5W-40 CG-4/SJ

Agrinol 5W-40 SL/CF

Agrinol 10W-40 CG-4/SJ

Agrinol 10W-40 SL/CF

Temperature range –30 ... +40 –25 ... +40

Kinematic viscosity at 100°С, mm2/s 12,5-16,3

Viscosity index,not less than 140 130

TBN, mg КОН/g, not less than 8,5 8,5 9,0 8,5

Sulphated ash, %, not more than 1,5 1,5 1,5 1,5

Temperature, °С: • Open cup fl ash point, °С, not less than • Pour point, not more than

200–35

200–28

200–32

Color, CNT units, not more than 3

Mass fraction of active elements,%, not less than• Calcium• Zinc

0,250,10

0,250,10

0,280,11

0,250,11


11

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

TS U 23.2-30802090-085:2009

10W-30 SM / CF: — fuel economy universal semi-synthetic motor oil for modern multi-valve gasoline and diesel engines with hydraulic lifter (including turbocharges) cars, vans, SUVs and light trucks manufactured after 2004, working under extremely difficult conditions (idling, "start-stop" mode all year round, including the cold winter). It can be used in diesel engines released after 1994 on diesel fuel with a sulfur content up to 0.5%.

10W-40 CI-4 / SL: universal semi-synthetic oil for high-speed four-stroke gasoline and diesel engines of cars and trucks, multi-valve, turbocharged (including the exhaust gas recirculation system (EGR) with direct injection. The optimal solution for the mixed fleets.

Agrinol SAE 10W-40 CI-4 – is a universal semi-synthetic motor oil, Low SAPS category (with low content of Sulphated Ash, Phosphorus and Sulphur), for high-speed four-cycle engines with different types of fuel injection and supercharging (models from 2002 manufacturing year). For engines with systems of Exhaust Gase Recirculation (EGR).

Perfomance level:Agrinol 10W-30 SM / CF FUEL ECONOMY (ACEA А1 / В1 / С2, API SM/CF)VW 502.00 / 505.00, Ford WSS-M2C913-C, МВ 229.1, ACEA А1 / В1 / С2

Agrinol 10W-40 CI-4 / SL PREMIUM (ACEA А3 / В3 / В4 / E7, API CI-4/SL)MB-228.3, 229.1, VW 500.00 / 505.00, Renault (RVI) RLD-2, Volvo VDS-3, MAN 3275, ACEA А3 / В3 / В4 / E7

Agrinol 10W-40 CI-4 PREMIUM (ACEA E7 / E5 / E3 / B3 / B4, API CI-4)BMW LL-98, MB-228.3, MAN M3275, Mack EO-M Plus, RVI RLD / RVI RLD-2, Volvo VDS-2 / VDS-3,

CAT ECF-1-a, Global DHD-1, Cummins CES 20076 / 77 / 78, Jaso DH-1, MTU Type 2, ACEA E7 / E5 / E3 / B3 / B4

Index name 10W-30 SM/CF

10W-40 CI-4/SL

10W-40 CI-4low SAPS

Temperature range –25...+30 –25...+40 –25...+40

Kinematic viscosity at 100°С, mm2/s 9,3-12,5 12,5-16,3 13,0-16,5


TBN, mg КОН/g, not less than 7,0 10,0 9,5

Sulphated ash, %,not more than 1,2 1,6 1,0

Temperature, °С:• Open cup fl ash point, °С, not less than• Pour point, not more than

200–32

205–32

210–32

Color, CNT units, not more than 3,0 3,5 2,5

Mass fraction of active elements, %, not less than: • Calcium• Zinc

0,20,1

0,280,11

0,20,09


12

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

TS U 23.2-30802090-085:2009

Agrinol 15W-40 CG-4/SJ, CG-4/SL are mineral, universal, motor oils, which are used in high-speed, four-stroke diesel engines of HPD (High Performance Diesel) class with and without turbocharging.

Agrinol 15W-40 CН-4/SJ — universal, mineral based motor oil, intended for high-load, high-speed, fourstroke diesel engines of class HPD main type, that use fuel with a sulfur content exceeding 0,5 % by weight.

Agrinol 15W-40 CI-4 — mineral based universal motor oil, intended for exploitation of four-stroke diesel engines with various types of injection systems and pressurization (ranged from 2002 release).

Perfomance level:Agrinol 15W-40 CG-4/SJ HP-DIESEL (ACEA E2-96/B2-98/A2-96, API CG-4/SJ)MB 228.1, VOLVO VDS, MAN 271, VW 505.00/501.01

Agrinol 15W-40 CG-4/SL (ACEA A3/B3, API CG-4/SL)MB228.1, 229.1, VW501.01/505.00

Agrinol 15W-40 CH-4/SJ TRUCK-DIESEL (ACEA E2-04/B3/A2-02, API CH-4/SJ)Cummins 20076/71, MAN 271, MTU Type 1, CAT ECF-1-a, Mack E-OM Plus, MB 228.1, Volvo

VDS-2, Deutz DQC II-10, Renault RD/RD-2, AllISOn C-4

Agrinol 15W-40 CI-4 GRAND DIESEL (ACEA E7/E5/E3/B3/B4, API CI-4)BMW LL-98, MB-228.3, MAN M3275, Mack EO-M Plus, Renault RVI RLD / RVI RLD-2, Volvo VDS-

2/VDS-3, CAT ECF-1-a, Global DHD-1, Cummins CES 20076/77, Jaso DH-1, MTU Type 2

Index nameAgrinol 15W-40 CG-4/SJ

Agrinol 15W-40 CG-4/SL

Agrinol 15W-40 CH-4/SJ

Agrinol 15W-40

CI-4

Temperature range –25 ... +40


Viscosity index,not less than 120

TBN, mg КОН/g, not less than 8,5 9 9 7,5

Temperature, °С: • Open cup fl ash point, °С, not less than • pour point, not more than

205–32

205–28


Sulphated ash, %, not more than 1,5

Mass fraction of active elements,%,not less than• Calcium• Zink

0,250,10


13

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

TS U 23.2-30802090-085:2009

Agrinol 10W-40 CF-4/SH, SG/CD — universal semi-synthetic motor oils.Agrinol 15W-40 CF-4/SG — universal mineral based motor oils.These oils are intended for lubricating of high-octane gasoline and powerful

four-stroke diesel engines (main type) of cars and microbuses, including turbocharged engines and catalyst. Products are recommended for home equipment and for mixed vehicle fleets, as well as for engines working on gas fuel.

Agrinol 15W-40 SF/CC, SG/CD — universal mineral based motor oil for highly-accelerated turbocharged engines, and engines without it, working in severe conditions on sour fuel as well as for unleaded gasoline with oxygenates.

Products are recommended for obsolete equipment.Perfomance level:Agrinol 10W-40 SG/CD CLASSIC (ACEA А2/B2/E1-96, API SG/CD), MB 229.1, VW 500.01/505.00,

MIL-L-46152B,-2104C, CCMC G5/PD-2

Agrinol 10W-40 CF-4/SH EXTRA DIESEL (ACEA E2-96/B3-98/A2-96), MB 228.1, VOLVO VDS, MAN 271

Agrinol 15W-40 SF/CC STANDARD (ACEA A2/B2, API SF/CC), MIL-46152-C; -46152E, CCMC G2/D1

Agrinol 15W-40 SG/CD CLASSIC (ACEA А2/B2/E1-96, API SG/CD), MB 229.1, VW 501.01/505.00, MIL-L-46152Е, CCMC G5/PD-2/D4

Agrinol 15W-40 CF-4/SG EXTRA DIESEL (ACEA E2-04/B3-98/A2-96, API CF-4/SG), MB 228.1, 227.1, VOLVO VDS, MAN 271, VW 505.00, AllISOn C-4, Mil-L-2104E/46152C

Index nameAgrinol 10W-40 SG/CD

Agrinol 10W-40 CF-4/SH

Agrinol 15W-40 SF/CC

Agrinol 15W-40 SG/CD

Agrinol 15W-40 CF-4/SG

Temperature range –25 ... +40


Viscosity index,not less than 130 115 120

TBN, mg КОН/g, not less than 7,5 7,5 6 7,5 8,2

Temperature, °С: • Flash point in open crucible,

notless than • Pour point, not more than

200–28

200–32

205–25

210–28

205–30

Sulphated ash, %, not more than 1,3 1,4 1,5


0,200,10

0,230,10

0,200,10

0,23010


14

OIL

S

Agr

inol

uni

vers

al m

ultig

rade

mot

or o

ils

TS U 23.2-30802090-085:2009

Agrinol 15W-30 SF/CE — universal tractor oil used in all types of diesel engines, including: turbocharged, hydraulic systems, hydrostatic and mechanical transmissions, wet brake systems and multi-disc clutches, power shafts and hydraulic boosters for all types of tractors.

Agrinol 20W-40 SF/CC, Agrinol 20W-50 SF/CC are mineral-based multi-grade engine oils. Oils are designed for the lubrication of all gasoline and diesel engines in passenger cars of domestic and foreign production, including a turbocharged heavy-duty engines.

Oil Agrinol 20W-50 SF/CC is specially adapted for engines with high degree of deterioration and equipment working in the southern regions.

Perfomance level:Agrinol 20W-40 SF/CC STANDARD (ACEA A2/B2, API SF/CC)MIL-46152-C; -46152E, CCMC G2/D1

Agrinol 20W-50 SF/CC STANDARD (ACEA A2/B2, API SF/CC)MIL-46152-C; -46152E, CCMC G2/D1

Index name Agrinol 15W-30 SF/CE



Temperature range –20 ... +40 –20 ... +45 –20 ... +50

Kinematic viscosity at 100°С, mm2/s 9,3-12,5 12,5-16,3 16,3-21,9

Viscosity index,not less than 120

TBN, mg КОН/g, not less than 9,0 6,0


210–25

210–28

215–28

Sulphated ash, %, not more than 1,5 1,3


0,250,10

0,200,08

REFERENCE BOOK

15

OIL

S

Oils

for a

utom

otiv

e di

esel

s

Oils for automotive diesels

TS U 23.2-30802090-085:2009

Agrinol SAE 10W CF-4 oil is designed for the lubrication of locomotive and marine diesel engines, bulldozer diesel engines of domestic and foreign production, metallurgical equipment of mining enterprises, various diesel engines operating in different conditions, drilling equipment etc.

Agrinol SAE 30 CF-4 and Agrinol SAE 40 CF-4 oils are designed for diesel engines of heavy trucks, mining and construction equipment operating under severe conditions. Agrinol SAE 30 CF-4 can be used during the spring and autumn periods the hydraulic oil ISO 100 in hydrodrives of construction, mining and special equipment.

Agrinol SAE 40 CF-4 can be used in summer or in hot climates.Agrinol SAE 50 CF-4 il is designed for seasonal use in summer period in the

highly accelerated diesel engines of trucks, road construction, agricultural and engineering machinery with engines of Euro-I и Euro-II environmental norms, operating in difficult conditions.

Perfomance level:Agrinol SAE 10W CF-4 (ACEA E3/B3/B4, API CF-4, ISO VG32)AllISOn C-3/4 Fluids, Cat TO-2, Vickers 35VQ25 Pump Test, MACK EO-K/2, MAN 270/271GM 6094-M, MiL-PRF-2104G, -L-46152E

Agrinol SAE 30 CF-4 (ACEA E3/B3/B4, API CF-4, ISO VG68)AllISOn C-3/4 Fluids, Cat TO-2, MACK EO-K/2, MAN 270/271, GM 6094-M, MiL-PRF-2104G,

-L-46152E, КАМАЗ, ЯМЗ-3-02

Agrinol SAE 40 CF-4 (ACEA E3/B3/B4, API CF-4, ISO VG150)AllISOn C-4 Fluids, MACK EO-K/2, MAN 270/271, GM 6094-M, MiL-PRF-2104G, -L-46152E,

LMOA G V

Index name Agrinol SAE 10W CF-4

Agrinol SAE 30 CF-4

Agrinol SAE 40 CF-4

Agrinol SAE 50 CF-4

Kinematic viscosity at 100°С, mm2/s 4,1-5,6 9,5-12,5 13,5-15,0 16,3-21,9

Viscosity index,not less than 95 95 95 92

TBN, mg КОН/g, not less than 9,0 9,0 9,0 9,0

Temperature, °С: • Open cup fl ash point, °С, not less

than • Pour point, not more than

190–30

220–20

220–15

225–15



0,300,1

0,300,1

0,300,1

0,300,1

Oils for automotive dieselsREFERENCE BOOK

16

OIL

S

Oils

for a

utom

otiv

e di

esel

s

GOST 8581-78

M-8G2, M-8G2k are winter oils for diesel automotive engines, including those with moderate turbocharging, stationary diesel engines and diesel generators operating under severe conditions. Temperature range: from minus 20°С to + 25°С.

М-8G2k oil unlike М-8G2 have more effective additive composition, which increases terms of oil change. Recommended for vehicles of KAMAZ, ZIL type and for “Ikarus”-type buses.

Operating temperature range: from minus 5°С to + 30°С.

Index name М-8G2

М-8G2k

Extra class First class

Compliance with classifi cations SAE (API) 20 (СС ) 20 (СС )

Kinematic viscosity at 100°С, mm2/s 8,0±0,5 7,5–8,5




200Minus 25

210Minus 30

200Minus 30


Degree of purity, mg on 100 g of oil, not more than 500 450 500

Mass fraction of active elements, %, not less than

• Calcium • Zinc • Phosphorous

0,150,060,06

0,190,050,05


17

OIL

S

Oils

for a

utom

otiv

e di

esel

s

GOST 8581-78

М-10G2, М-10G2k — summer oils for lubrication of automotive diesel engines, including those with moderate turbocharging, high-speed stationary diesel engines and diesel generators working in the operating conditions under which sedients are formed by high temperatures.

М-10G2k oil unlike М-10G2 have more effective additive composition, which increases terms of oil change. Recommended for vehicles of KAMAZ, ZIL type and for “Ikarus”-type buses.

Operating temperature range: from minus 5°С to + 30°С.

Index name М-10G2

М-10G2k

Extra class First class

Compliance with classifi cations SAE (API) 30 (СС ) 30 (СС )

Kinematic viscosity at 100°С, mm2/s 11,0±0,5 11,0±0,5




205Minus 15

220Minus 18

205Minus 15


Degree of purity, mg on 100 g of oil, not more than 500 450 500

Mass fraction of active elements, %, not less than

• Calcium • Zinc • Phosphorous

0,150,060,06

0,190,050,05


18

OIL

S

Oils

for a

utom

otiv

e di

esel

s

GOST 8581-78

M-10V2 — summer oil for lubricating of middle-accelerated automotive diesels SMD-14, А-41, D-50, D-37 and others. Operating temperature range: summer oil М-10V2: from minus 5°С to +30°С.

TS U 23.2-30802090-085:2009

Agrinol М-14G2k is intended for lubricating of four-stroke transport diesel engines, highly accelerated automotive diesels without supercharging (or with limited supercharging), that operate under moderate and heavy conditions. Agrinol М-14G2k oil can be used instead of М-10G2k motor oil according to GOST 8581 for summer operation of automotive diesels in regions with long and hot summers. Temperature range: from minus 20°С to +40°С.

Index name М-10V2 Agrinol М-14G2k

Compliance with classifi cations SAE (API) 30 (СВ ) 40 (СС)

Kinematic viscosity at 100°С, mm2/s 11,0±0,5 14,0–15,5

Viscosity index, not less than 85 90

Total Base Number, mg КОН/g, not less than 3,5 6,0


205Minus 15

215Minus 25


Mass fraction of active elements, %, not less than • Calcium • Zinc • Phosphorous

0,080,050,05

0,190,050,05


19

OIL

S

Oils

for a

utom

otiv

e di

esel

s

GOST 8581-78

М-8DM, М-10DM — oil is intended for summer use for highly accelerated automotive diesels, high-speed stationary diesels and diesel generators of domestic and foreign production with turbo charger and without it, tractors, bulldozers, dump trucks, in heavy operating conditions or fuel, which vary in quality (including sour). Operating temperature range: summer oil М-10DM from minus 5°С to +30°С, winter oil М-8DM: from minus 20°С to +25°С.

Index name М-8DМ М-10DМ

Compliance with classifi cations SAE (API) 20 (СD ) 30 (СD )

Kinematic viscosity at 100°С, mm2/s 8,0–8,5 not less than 11,4


Total Base Number, mg КОН/g, not less than 8,5 8,2


195Minus 30

220Minus 18


Mass fraction of active elements, %, not less than • Calcium • Zinc • Phosphorous

---

0,300,09

–

REFERENCE BOOK

20

OIL

S

Uni

vers

al m

iner

al m

otor

oils

Universal mineral motor oils

GOST 8581-78

М-8V — winter oil for medium augmented automotive diesel engines (ZIL-130, GAZ-66,51, KaVZ, KAZ, PAZ, LIAZ). Also used in a medium augmented gasoline engines of cars and trucks (replacement intervals up to 18 thousand km). Can be applied in such medium augmented automotive diesel engines as SMD-14, А-41, D-50, D-37, etc., which are running on high sulfur fuel. Operating temperature range: from minus 20°С to +25°С.

М-6z/12G1 — multigrade oil for lubrication of boosted gasoline engines of passenger cars in regions with moderate climate and air temperature ranged from minus 20°С to +45°С.

Index name M-8V М-6z/12G1

Compliance with classifications SAE (API) 20W-20 (CВ/SD) 15W-30 (SF)

Kinematic viscosity at 100°С, mm2/s 7,5–8,5 not less than 12

Dynamic viscosity at minus 15°С, mPa·s, not more than – 4500



Temperature,°С: • Open cup fl ash point, °С, not less than • Pour point, not more than

207Minus 25

210Minus 30


Mass fraction of active elements, %, not less than: • Calcium • Zinc

0,160,09

0,230,10

REFERENCE BOOK

21

OIL

S

Oils

for 2

- an

d 4-

stro

ke e

ngin

es

Oils for 2- and 4-stroke engines

TS U 23.2-36451680-137:2010

Agrinol Moto Racer 2T — low ash, mineral oil for the lubrication of modern two-stroke gasoline engines of average power, such as: chain saws, lawn mowers, boat motors, motorcycles, mopeds, etc.

Recommended ratio of the fuel mixture is: 1:40 (oil: gasoline).Agrinol Aqua Moto 2T — low ash, semisynthetic oil for the lubrication

of modern 2-stroke boat motors (including overhead) with water coolance (boats, motor boats, jet skis, jet skis), as well as engines of snowmobiles, motorcycles, chainsaws and other portable equipment with a variety of oil supply methods (by adding a gasoline or by injection through the nozzle).

Recommended ratio of the fuel mixture is: 1:50 (oil: gasoline).

Index name Agrinol Moto Racer 2T Agrinol Aqua Moto 2T

Compliance with classifi cations SAE/API /JACO/ISO/NMMA 40/ТС/FB/L-EGR/– 20/–/–/–/TC-W3




Mass fraction, %, not more than: • Water • Mechanical impurities

TracesNone

TracesNone


200-25

90-25


Mass fraction of active elements, %, not less than:

• Calcium 0,02 0,03

of small machinery

Oils for 2- and 4-stroke engines REFERENCE BOOK

22

OIL

S

Oils

for 2

- an

d 4-

stro

ke e

ngin

es

TS U 23.2-36451680-137:2010

Agrinol Moto Drive 2T — low ash, semisynthetic oil for the lubrication of modern two-stroke gasoline engines of medium and high power, such as: chainsaws, snowmobiles, karts, motorcycles, mopeds, and others. Oil is recommended for use both in mixture and in separate fuel and oil supply.

Recommended ratio of the fuel mixture is:– for snowmobiles, motorcycles, etc. — 1:50 (oil: gasoline);– for lawn mowers, chainsaws — 1:40 (oil: gasoline).Agrinol Moto Drive 4T — low ash, semisynthetic engine oil designed

to lubricate the modern four-stroke engines of motorcycles, ATVs, scooters and other motor vehicles with any clutch, mobile equipment, water-cooled outboard boat engines.

Index name Agrinol Moto Drive 2T Agrinol Moto Drive 4T

Compliance with classifi cations SAE/APIISO

20/ТС +L-EGD

10W-40/SJ,SG-




Mass fraction, %, not more than: • Water • Mechanical impurities

TracesNone

TracesNone


80-30

205-32



• Calcium • Zink

0,04-

0,250,11

of small machinery

REFERENCE BOOK

23

OIL

S

Oils

for m

arin

e an

d lo

com

otiv

e en

gine

s

Oils for marine and locomotive engines

GOST 12337-84

М-14V2 oil is intended for use in two-and four-stroke diesel and marine diesel engines of trunk piston type, operating on distillate fuels with sulfur content up to 0,5 % (mass fraction), as well as for engines of open- pit dump trucks. Also it can be used in southern areas as summer oil, instead of М-10V2.

М-16G2TsS is intended for lubricating of the trunk piston of cylinders (high degree of forcing), crosshead (low-speed) of diesel engines with not more than 1,5 % of sulfur in fuel.

Agrinol Marine TBN 15 – marine engine oils developed for high-performance trunk piston engines of average speed, which operates on distillate or residual fuel with the content of sulfur of at most 1,5%. It is recommended for all high-performance trunk engines and reduction gears where such type of lubricant is determined by the manufacturer.

Index name М-14V2 М-16G2TsSAgrinol Marine TBN 15

Agrinol Marine TBN 15

Compliance with classifi cations SAE (API) 40 (СВ) 50 (СС) 30 (CD) 40 (CD)

Kinematic viscosity at 100°С, mm2/s 13,5–14,5 15,5–17,0 905 910

Viscosity index, not less than 85 92 9,5-12,5 13,5-16,5

TBN mg КОН/g, not less than 4,8 9,0 92 92


210Minus 12

220Minus 10

230Minus 20

230Minus 15


Emulsifi ability with water, cm3, not more than – 0,5

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than

• Critical load • Scuff index • Wear index (196 N), mm, not more than

7843630,4

8233330,4

3338230,5

0,650,050,04

REFERENCE BOOK

24

OIL

S

Cha

in S

aw O

il

Chain Saw Oil

TS U 19.2-32365441-206:2016

Special oils series Chain Saw Oil EXPERT– 68, -100, -150 is designed for lubrication of chainsaw, chain rails (tires) and the leading asterisks of all kinds of electric and gasoline-powered saws equipped with both manual and automatic lubrication system.Developed to improve the use of cutting elements chainsaws any models and classes.

Index name Chain Saw Oil EXPERT

Comply with international classifications: ISO VG 68 100 150

Kinematic viscosity at 100°С, mm2/s 60-75 90-110 148-165

Acid number, mg КОН per 1g of oil, not more thаn 1,5 1,2 1,2

Mass fraction of water no more Traces

Mass fraction of mechanical impurities 0,015


Open cup fl ash point, °С, not less than 210 214 220

Pour point, °С, not higher than -30 -30 -28

Density at 20°С, kg/m3, not more than 900 910 920

Tribological characteristics on four-ball machine at (20 ± 5) ° C and load of 196N

• Welding load, N, not less than • Scuffi ng index, N, not less than • Wear index mm, not more than

23237800,5

Corrosive effect on the metals, copper100 ° C, 3 h Pass

Chain Saw Oil REFERENCE BOOK

25

OIL

S

Cha

in S

aw O

il

TS U 19.2-32365441-206:2016

Special oils series Chain Saw Oil STANDARD is designed for lubrication of chainsaw, chain rails (tires) and the leading asterisks of all kinds of electric and gasoline-powered saws equipped with both manual and automatic lubrication system.

Index name Chain Saw Oil Standard

Comply with international classifications: ISO VG 68 100 150

Kinematic viscosity at 100°С, mm2/s 61,2-74,8 90-110 135-150

Acid number, mg КОН per 1g of oil, not more thаn 1,2 1,2 1,2

Mass fraction of water no more Traces

Mass fraction of mechanical impurities 0,015


Open cup fl ash point, °С, not less than 220 226 230

Pour point, °С, not higher than -30 -28 -26


Tribological characteristics on four-ball machine at (20 ± 5) ° C and load of 196N Wear index mm, not more than 0,5

Corrosive effect on the metals, copper 100 ° C, 3 h Pass

Color, CNT units, not more than 4 4,5 5

REFERENCE BOOK

26

OIL

S

Oils

for m

arin

e an

d lo

com

otiv

e en

gine

s

Oils for marine and locomotive engines

GOST 12337–84

М-14DTsL20, М-14DTsL30 oils are used for lubricating medium-trunk-piston marine diesel engines with a combined circulation or lubrication system and industrial engines, gearboxes, tools and other units operating on fuel with a sulfur content of 2.5-3.5%.

Index name М-14DTsL20 М-14DTsL30

Compliance with classifi cations SAE (API) 40 (CD) 40 (СD)

Kinematic viscosity at 100°С, mm2/s 13,5–15,0 13,5–15,0


Total Base Number, mg КОН/g, not less than 18 27


220Minus 10

210Minus 10


Emulsifi ability with water, cm3, not more than 1,0 1,0

Mass fraction of active elements, %, not less than: • Calcium • Zinc • Phosphorus

0,650,0450,040

1,00,0450,040

Tribological characteristics on 4 balls machineat (20±5) °С, N, not less than

• Critical load • Scuff index • Wear index (196 N), mm, not more than

8333330,5

–––

Oils for marine and locomotive enginesREFERENCE BOOK

27

OIL

S

Oils

for m

arin

e an

d lo

com

otiv

e en

gine

s

GOST 12337–84

М-20Е70 oil is used for lubrication of the major low-speed marine diesel engines during the work on low-sulfur heavy fuels (with sulfur content up to 4,5%).

М-20V2F — seasonal oil for marine diesel engines of 12CHN 18/20 and CHN 16/17 type, working with extended terms of oil change in difficult conditions, conducive to the formation of high temperature deposits.

Index name М-20Е70 М-20V2F

Compliance with classifi cations SAE (API) 50 (CB) 50 (CB)

Kinematic viscosity at 100°С, mm2/s 20,0–23,0 19,0–22,0


Total Base Number, mg КОН/g, not less than 70 2,8


200Minus 12

230Minus 15


Emulsifi ability with water, cm3, not more than 0,3 –

Mass fraction of active elements, %, not less than: • Calcium • Zinc • Phosphorus

2,8––

0,08–

0,03

Tribological characteristics on 4 balls machineat (20±5) °С, N, not less than:

• Critical load • Scuff index • Wear index (196 Н), mm, not more than

9803920,3

8233530,32


28

OIL

S

Oils

for m

arin

e an

d lo

com

otiv

e en

gine

s

TS U 23.2-36451680-144:2010

Agrinol M-14D2U, Agrinol М-14D2 — motor mineral oils for lubricating of marine, locomotive, stationary, transport and industrial diesel engines, as well as heavy-duty diesel engines, mining vehicles and diesel rigs requiring oils of D2 group.

Index name Agrinol М-14D2U Agrinol М-14D2

Compliance with classifi cations SAE (API) 40 (CD) 40 (СD)

Kinematic viscosity at 100°С, mm2/s 13,5–14,5


Total Base Number, mg КОН/g, not less than 13,0


220Minus 12

230Minus 12



• Calcium • Zinc • Phosphorus

0,450,100,10

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than:

• Critical load • Scuff index, • Wear index (196 N), mm, not more than

8234210,40


29

OIL

S

Oils

for m

arin

e an

d lo

com

otiv

e en

gine

s

TS U 23.2-36451680-145:2010

Agrinol М-14V is a mineral engine oil used for lubrication of two-and four-stroke diesel engines of 2D100, D-50 types and similar to them in terms of boosting shunting and industrial locomotives

TS U 23.2-30802090-122:2009

Agrinol МТ-16P is a seasonal mineral oil for lubricating of diesel engines of B2 type vehicles and its analogs in terms of forcing the naturally aspirated diesel engines: automotive diesel engines of old models, marine, locomotive, stationary and transport naturally aspirated diesel engines.

GOST 12337–84

М-20G2 — season mineral engine oil used for lubricating of high-speed vessels, diesel and other diesel engines. Provides lubrication for two-stroke diesels of MD 23/2×30 type.

Index name Agrinol М-14B Agrinol МТ-16P М-20G2

Compliance with classifi cations SAE (API) 40 (–) 40 (СВ) 50 (СС)

Kinematic viscosity at 100°С, mm2/s 14,0±0,5 15,5–16,5 not less than 20,0


Total Base Number, mg КОН/g, not less than 1,0 4,0 9,0


200Minus 15

210Minus 25

235Minus 15

Sulphated ash, %, not more than 1,0 0,6–1,0 1,9


• Calcium • Zinc • Phosphorus

–––

–––

0,360,050,05


• critical load • scuff index • wear index (196 N), mm, not more than

––

0,6

––

0,45

8233630,35

REFERENCE BOOK

30

OIL

S

Tra

nsm

issi

on o

ils

Transmission oils

TS U 23.2-30802090-120:2009

TRANSMISSION oils series consists of transmission multigrade oils, which are used for lubricating of all types of gears: cylindrical, conical, spiral bevels and hypoid gears of cars, trucks, buses, tractors; road and construction equipment.

Transmission Oil Classic SAE 80W-90 API GL-4 is intended for lubricating mechanical transmissions, cars, lorries and mobile equipment, as well as other sites where level of API GL-4 (TM-4) oil is recommended.

Transmission Silver SAE 85W-90 API GL-5, Transmission Gold SAE 80W-90 API GL-5 and Transmission Platinum SAE 75W-90 API GL-5 oils are designed for lubrication of mechanical transmissions with all types of gears, including hypoid. Can be used in driving axles and transfer boxes of passenger cars, trucks and other mobile equipment operating in the most demanding conditions, where oil of API GL-5 (ТМ-5) level is needed.

Perfomance level:Platinum SAE 75W-90 GL-5: MIL-L 2105 C/D, ZF TE-ML 08Gold SAE 80W-90 GL-5: MIL-L-2105D, MB 235.6, ZF TE-ML 05A-07A-12A-16C/D-17B, MAN 342MSilver SAE 85W-90 GL-5: MIL-L-2105D, MB 235.6, ZF TE-ML 05A-07A-12A-16C/D-17B, MAN 342MLSAE 85W-140 GL-5: MIL-L-2105D, ZF TE-ML 05A-07A-12A-16C/D-17B, MAN 342MLClassic 80W-90 API GL-4: Ford SQM-2C-9008 A, MAN 341 тип E-1/341 тип Z-1, MB 235.1, MIL

L-2105D, ZF TE-ML 16A/TE-ML 17A/TE-ML 19A

Index name

Transmission

Classic SAE

80W-90 API GL-4

Silver SAE 85W-

90 API GL-5

Gold SAE 80W-90 API GL-5

Platinum SAE 75W-

90 API GL-5

SAE 85W-140 API GL-5

Kinematic viscosity at 100°С, mm2/s 16,5 17,5 17,5 13,5 24,0

Viscosity index, not less than 95 95 95 95 95



200-20

210-15

200-20

185-25

220-20

Mass fraction of sulfur, %, not less than 0,8 1,0 1,0 1,0 1,0

Corrosive effect on metals Pass


• Welding load • Scuff index • Wear index (196 N), not more

34794900,5

36875680,4

36875680,4

32834900,4

4136588

-

Transmission oilsREFERENCE BOOK

31

OIL

S

Tra

nsm

issi

on o

ils

TS U 23.2-36451680-153:2010

Agrinol MULTIPLEX GL-5 SAE-90 is a universal gear oil used for lubrication of reducers of rolling mills, mechanical transmissions with all types of gears including hypoid (drive axles, transfer cases, etc) of cars, trucks and tractors, metallurgical equipment, which operate under severe conditions, where oils of ТМ-5 (API GL-5) level are needed.

MULTIPLEX SAE 140 GL-5 - transmission oil for the lubrication of loaded axles and gears of all types: cylindrical, conical, spiral bevel and hypoid gear off-road vehicles, trucks, buses, tractors, road and construction equipment, operating in the most severe operating conditions that require compliance with standards API GL- 5.

Index name Agrinol MULTIPLEX GL-5 SAE-90

Agrinol MULTIPLEX SAE 140 GL-5

Kinematic viscosity, not less than • At 100°С, mm2/s • At 40°С, mm2/s

18200

24,0


Acid number, mg КОН/1g, not more than 1,2 -

Color on CNT colorimeter with 15:85 dilution, CNT units, not more than 6 -


215Minus 25

230Minus 15

Mass fraction: • Mechanical impurities, %, not more

than • Water, %, not more than • Phosphorous, %, not less than

0,01None0,04

-

Corrosive effect on metals Pass 0,01


• Critical load • Welding load • Scuff index • Wear index (196 N)

98041356000,4

3920580


32

OIL

S

Tra

nsm

issi

on o

ils

GOST 23652–79

Oil TAp-15V is intended for lubricating of transmissions of trucks, road construction equipment and gears (spur, spiral bevel gearings and worm-type gears where the contact stresses are up to 2000 MPa and oil temperature is up to 130 °C). In the middle climatic zone this oil is used all year-round at temperatures up to minus 25 °C.

TAD-17i oil is intended for lubricating of all types of gears (including hypoid) of cars and other mobile equipment. Multigrade oil, operates at temperatures up to minus 30 °С. The upper limit of continuous performance is 140 °C.

Index name ТАp-15В ТАD-17i

Compliance with classifi cations SAE (API) 90 (GL-3) 85W-90 (GL-5)

Kinematic viscosity, mm2/s: • At 50°С • At 100°С

–15,0±1,0

110–120not less than 17,5

Viscosity index, not less than – 100

Corrosion test (for 3 hours): • At 100°С (steel and copper plates) • At 120°С (copper plates), points, not more than

Pass–

–2с


185Minus 20

200Minus 25


• Scuff index • Critical load • Wear index (392 Н), mm, not more than

3283490–

36875680,40

Transmission oils in accordance with GOST 23652-79


33

OIL

S

Tra

nsm

issi

on o

ils

GOST 23652–79

TSp-10 oil is intended for lubricating of heavily loaded cylindrical, bevel and spiral bevel gears operating under the contact stresses up to 1500 2000 MPa and temperatures of oil in volume up to (100-110)°С.

Product is a winter oil, operational at the temperatures up to minus 45°С.TSp-15K oil is a multigrade transmission oil for lubricating of heavily loaded

cylindrical, bevel and spiral-bevel gears of KamAZ heavy-vehicles. Operates at temperatures up to minus 30°С.

TSp-14gip oil is used in hypoid gears of trucks. It is a multigrade oil, operated at the temperatures up to minus 30°С.

Index name TSp-10 TSp-15K TSp-14gip

Compliance with classifi cations SAE (API) 80 (GL-3) 90 (GL-3) 90 (GL-5)

Kinematic viscosity, mm2/s: • At 100°С, not less than 10,0 15,0±1,0 14,0


Corrosion test (for 3 hours): • At 100°С (steel and copper plates) • At 120°С (copper plates), points, not more

than

Pass–

–2с

Pass–


128Minus 40

191Minus 25

215Minus 25


• Scuff index • Critical load • Wear index (392 N)

3479470–

34795390,50

3920588–


34

OIL

S

Tra

nsm

issi

on o

ils

TS U 23.2-30802090-021:2002

Oil ТАp-15V is intended for lubricating of transmissions of trucks, road construction equipment and gears (spur, spiral bevel gearings and worm-type gears where the contact stresses are up to 2000 MPa and oil temperature is up to 130 °C). In the middle climatic zone this oil is used all year-round at temperatures up to minus 25 °C.

ТAD-17i oil is intended for lubricating of all types of gears (including hypoid) of cars and other mobile equipment. Multigrade oil, operates at temperatures up to minus 30 °С. The upper limit of continuous performance is 140 °C.

Agrinol ТSzp-8 oil is designed for all seasons use in in the northern regions and in winter in average climatic zones, lubricating aggregates of transmissions that have planetary gear transmissions and hydraulic control systems of some other mobile vehicles. This is transmission transport machinery, spur, helical-bevel and worm gears operating under conditions of contact stresses up to 20,000 kg/cm2.

Index name Agrinol ТАp-15В

Agrinol ТАD-17i

Agrinol ТSzp-8

Compliance with classifi cations SAE (API) 90 (GL-3) 85W-90 (GL-5) 80W (GL-3)

Kinematic viscosity at 100°С, mm2/s 15,0±1,0 18,0 7,5-8,5


Mass fraction of sulfur, %, not less than 0,7 1,0 1,0



185-12

200-15

163-40


• Welding load • Wear index (196 Н), mm, not more than

2930-

32830,40

24500,5

Agrinol Transmission oils


35

OIL

S

Tra

nsm

issi

on o

ils

TS U 23.2-36451680-153:2010

TSp-10 oil is intended for lubricating of heavily loaded cylindrical, bevel and spiral bevel gears operating under the contact stresses up to 1500 2000 MPa and temperatures of oil in volume up to (110)°С.

Product is a winter oil, operational at the temperatures up to minus 45°С.TSp-15K oil is a multigrade transmission oil for lubricating of heavily loaded

cylindrical, bevel and spiral-bevel gears of KamAZ heavy-vehicles. Operates at temperatures up to minus 30°С.

Agrinol TSp-14gip oil designed for lubricating hypoid trucks (mainly GAZ) and special machines as a year-round temperate climatic zone, where the recommended oil level TM-5 (API GL-5).

Index name Agrinol TSp-10

Agrinol TSp-15K

Agrinol TSp-14gip

Compliance with classifi cations SAE (API) 80W (GL-3) 90 (GL-3 ) 90 (GL-5)

Kinematic viscosity at 100°С, mm2/s 10,0 15,0±1,0 14,0



Mass fraction of sulfur, %, not less than 1,0


128-30

191-15

215-15


• Welding load • Wear index (196 Н)

3087-

30870,50

3479-


36

OIL

S

Tra

nsm

issi

on o

ils

TS U 23.2-30802090-021:2002

Agrinol Nigrol oils are used as working liquids for gearboxes, easy-loaded units of industrial equipment, open toothed gears, planetary toothed gears of cranes and excavators, toothed gears and transmission units of industrial equipment, tractors, agricultural and road-building machines, constructing devices.

Operating temperature range of Agrinol Nigrol-L:– grade A: from minus 5°С to 110°С;– grade B: from 0°С to 140°С.Operating temperature range of Agrinol Nigrol-Z:– grade А: from minus 12°С to 110°С;– grade B from minus 10°С to 140°С.

Index nameArginol Nigrol-Z Agrinol Nigrol-L

Grade A Grade B Grade A Grade B

Compliance with classifi cations SAE (API) 90 (GL-1) 90–140 (GL-1)

Appearance Homogenous black liquid

Kinematic viscosity at 100°С, mm2/s 18–22 27–34


140Minus 12

180Minus 10

140Minus 5

1800

Mass fraction, %, not more than: • mechanical impurities • water

0,05Traces


Transmission oils for industrial an obsolete equipment


37

OIL

S

Tra

nsm

issi

on o

ils

TS U 23.2-36451680-134:2010

Agrinol ATF ІІD is a mineral oil used in automatic gearboxes, transmissions, in power assisted steering of cars and trucks, buses, tractors, road and construction machinery, special equipment in accordance with the instructions of the manufacturers of vehicles.

Agrinol ATF ІІI is a semi-synthetic oil used in automatic gearboxes, transmissions, in power assisted steering of cars and trucks, buses, tractors, road and construction machinery, special equipment in accordance with the instructions of the manufacturers of vehicles.

Perfomance level:Agrinol ATF ІІD A-MATIC: GM Dexron IID, Mercon, Caterpillar TO-2, Volvo 97335 Agrinol ATF ІІI A-MATIC PLUS: GM Dexron IIІ, Mercon V, MAN 339 type V-1, MAN 339 type Z-2,

Caterpillar TO-2, Volvo 97340, ZF TE-ML-04D -14C, -16L, - 17L

Index name Agrinol ATF ІІD Agrinol ATF ІІI

Kinematic viscosity at 100°С, mm2/s, not less than 7,5±0,5



185Minus 42

175Minus 45

Corrosive effect on metals, points, not more than 1B


Mass fraction, %, not less than: • sulfur, %, not less than • mechanical impurities, %, not less than

0,4None

0,1None

Tribological characteristics on 4 balls machineat (20±5) °С, N, not less than

• wear index (314 N) 0,5

Automatic transmission fluid

REFERENCE BOOK

38

OIL

S

Uni

vers

al o

ils fo

r aut

omot

ive

dies

els

Universal oils for automotive diesels

TS U 23.2-36451680-137:2010

Agrinol STOU SAE 10W-30, STOU SAE 10W-40 – universal series of oils of STOU class (Super Tractor Oil Universal) for apllication in engines, including turbocharged, in mechanic transmissions and hydrosystems (hydro and hydraulic clutches) of tractors and other agricultural and building vehicles. Suit for apllication in “wetdiscbrakes” of modern special technics.

Perfomance level:Engines: АРI CG-4, ACEA E3, SAE J300 10W-30 (10W-40)MAN 271Transmission units:SAE J306 75W-80 (75W-90)ALLISON C-4, CAT TO-2/TO-4, FORD M2C159 B/C; John Deere JDM J 20 C; MF M1135, 1139, ZF TE-

ML06AHydro-systems and hydraulic clutches:ISO VG 46 / 68 / 100, DIN 51524.2/3 НLP/HVLP-D AFNOR NFE 48603 HV;

Index name STOU SAE 10W-30 STOU SAE 10W-40

Viskosity index,not less than 135





200–32

205–32

Universal oils for automotive dieselsREFERENCE BOOK

39

OIL

S

Uni

vers

al o

ils fo

r aut

omot

ive

dies

els

TS U 23.2-36451680-137:2010

Agrinol UTTO 80W, 85W – universal transmission-hydraulic oil (Universal Tractor Transmission Oil), which applied in combined driving gear (transmission/hydraulic), including hydraulic (“wet”) brakes of tractor vehicles (agricultural, road-building and other special technics). It is possible to use the product in different hydraulic mechanisms. Special additives provide noiseless operation of power unit.

Perfomance level:Transmission units:АРI GL-4SAE; J306C 80W 85W; SAE J300; 10W-30; 20W-40; ZF TE-ML 03E, 05F, 06K,17E, 21F;

Allison C3/C4; Caterpillar TO-2; John Deere JDM J 20 C; Ford M2C 134 C/D, M2C 86 B/C;Hydro-systems and hydraulic clutches:ISO VG 46 / 68 /100; DIN51524.2/3 HLP/HLP-D

Index name UTTO 80W UTTO 85W

Viskosity index,not less than 135





200–32

205–32

REFERENCE BOOK

40

OIL

S

Oils

for h

ydro

mec

hani

cal t

rans

mis

sion

s

Oils for hydromechanical transmissions

TS U 23.2-30802090-047:2005

Agrinol A oil is used for multigrade exploitation in torque converters, automatic transmissions at the environmental temperatures up to minus 35°С. Product can be used as winter oil in the hydrostatic drives of self-propelled agricultural and other machinery.

Agrinol R oil is used in systems of wheel hydrostrengthenings and hydrostatic transmissions at the environmental temperature up to minus 40°С.

TS U 23.2-36451680-165:2011

Special Oil HMT is used for multigrade exploitation in torque converters, automatic transmissions, and hydrostatic transmissions at the environmental temperatures up to minus 5°С.

Index name Agrinol A Agrinol R Special Oil HMT

Compliance with classifi cations ISO VG (ISO 6743)

32(Automatic

transmission fl uid)

32(Automatic


32(Automatic




17–22not more than

5,0





175Minus 40

163Minus 45

190Minus 40

Mass fraction, %, not more than: • Mechanical impurities • Water

0,01None


• Calcium • Zinc

0,160,08

0,160,8

0,160,08


Ash content, %, not less than 0,60 0,60 0,60

REFERENCE BOOK

41

OIL

S

Hyd

raul

ic o

ils

Hydraulic oils

TS U 23.2-30802090-067:2006

Hydraulic oil Agrinol VMGZ is used as a winter oil. In Arctic conditions it is used as а year-round working liquid in hydraulic drives and hydraulic control systems of constructing, road, logging, lifting and other machines and mechanisms exploited in the open air at the working temperature of oil from minus 55 °С up to 80 °С.

GOST 6794–75

AMG-10 oil is designed for use as a working fluid for hydraulic devices operating in the range of environmental temperatures from minus 60°С to +55 °С.

TS U 23.2-30802090-124:2009

Spindle oil Agrinol AU is intended for use in lightly loaded hydraulic systems of mobile equipment with gear and piston pumps, working under pressure up to 15 MPa and maximum oil temperature up to 100°С.

Oil supports the work of hydraulic drives in the temperature range from minus 35°С to plus 100°С.

Index name AMG-10 Agrinol VMGZ Agrinol AU

Compliance with classifi cations ISO VG ISO 6743 // DIN 51524

Designation according to GOST 17479.3

15 HL // HLPМГ-15-Б

15 HM // HLPМГ-15-В

22НН

МГ-22-А

Kinematic viscosity, mm2/s: • at 40°С, not less than • at 50°С, not less than • at minus 40°С, not more than • at minus 50°С, not more than

-10-

1250

-10

1500-

16,0–22,0-

30000-

Viscosity index, not less than 140



93Minus 70

135Minus 60

163Minus 45

Mass fraction, %, not more than: • mechanical impurities • water

0,003None

NoneNone

NoneNone

Mass fraction of zinc, %, not less than 0,01

Ash content, %, not more than - 0,2 0,005

Acid number, mg КОН/g, within Not more than 0,03 0,40–1,0 0,07

Low-temperature oils

REFERENCE BOOK

42

OIL

S

Pow

er o

ils

Power oils

GOST 9972–74

Turbine oils with additives TP-22, TP-30 and TP-46 are intended for lubricating and cooling bearings of such various turbo-units as steam and gas turbines, water turbines, turbocompressor machines, ship steam turbine units and other analogous types of equipment. These oils are also used as working liquids for turbo-units’ regulating systems, circulating and hydraulic systems of diverse industrial mechanisms.

GOST 10289–79

Oil for marine gas turbines (SGT) product is used for lubrication and cooling of gears and bearings of marine gas turbines.

Index name Тp-22 Тp-30 Тp-46 SGT

Compliance with classifi cations ISO VG 32 46 68 -

Kinematic viscosity, mm2/s: • At 40°С, not less than • At 50°С, not less than

28,8-35,2-

41,4-50,6-

61,2-74,8-

-7,0-9,6

Viscosity index, not less than 90 95 90 -

Acid number, mg КОН/g, within, not more than 0,05 0,5 0,5 0,02

Temperature, °С: • Flash point, not less than • Fluidity, not more than • Pour point, not more than

186-6-15

190-6-10

220-6-10

135 (in closed crucible)

--45

Ash content, % not more than - 0,005

Anti-corrosion properties, steel (copper, group) None (-) -

Demulsifi cation number, min, not more than 3,0 3,5 3,0 -

Oxidation stability: • Sediment, %, not more than • Acid number, mg КОН/g, within,

not more than

0,030,3

0,030,4

0,11,5

0,200,65

Turbine oils according to GOST 9972-74, GOST 10289-79

Power oilsREFERENCE BOOK

43

OIL

S

Pow

er o

ils

TS U 23.2-30802090-076:2007

The lubricating oil Agrinol МS-8p is intended for usage in hydraulic and lubricating and cooling systems of gas-turbine units, gas-pumping units, equipment of gas pipelines and other industrial equipment. The oil is efficient at the temperature varying from minus 40°С up to 80°С

Index name Agrinol MS-8p

Kinematic viscosity, mm2/s: • At 50°С, not less than • At minus 40°С, not less than

84000

Acid number, mg КОН/g, within, not more than 0,05


150Minus 55

Mass fraction, %, not more than: • Mechanical impurities • Water • Sulfur

NoneNone0,5

Corrosion on the plates after oxidation, mg/cm2, not more than:

• Steel ShH 15 • Copper М1 and М2 • Aluminum alloy АК4

None+0,2None

Oxidation resistance, not more than: • Kinematic viscosity at 50°С, mm2/s • Kinematic viscosity at minus 40°С, mm2/s • Acid number, mgКОН/g • Mass fraction of insoluble residue, %

10,055000,7

0,15


• Critical load • Diameter of the wear spot ( 196N), not more than

4900,55


44

OIL

S

Pow

er o

ils

TS U 23.2-36451680-156:2010

Kompressoil VG 46, 68, 100 oil is intended for lubricating of pistons (cross-head, without cross-head, single and multistage) and rotary air compressors working permanently at 220°С on a blowing line.

Low-viscosity versions of Kompressoil VG oils are used in rotary compressors (in accordance with the recommendations of manufacturers of compressors).

Index nameKompressoil

VG 46 VG 68 VG 100

Compliance with classifi cations ISO VGDIN 51506

46VDL

68VDL

100VDL

Kinematic viscosity at 100°С, mm2 / s42,0 – 50,0

6,5 – 7,561,0 – 75,0

7,5 – 9,090,0 – 110,0

9,5 – 12,0


Acid number, mg КОН / g, not more than 0,2 0,2 0,2



210Minus 20

220Minus 20

225Minus 20

Mass fraction of sulfur, %, not more than 0,3 0,5 0,5

Oxidation stability: • Sediment, %, not more than 0,02 0,02 0,02


Color with dilution 15 / 85, CNT units, not more than 1,5

Kompressoil VG


45

OIL

S

Pow

er o

ils

TS U 23.2-36451680-156:2010

Kompressoil VG 150, 220, 320 oil is intended for lubricating of pistons (cross-head, without cross-head, single and multistage) and rotary air compressors working permanently at 220°С on a blowing line.

Low-viscosity versions of Kompressoil VG oils are used in rotary compressors (in accordance with the recommendations of manufacturers of compressors).

Index nameVG 150 VG 220 VG 320

Compliance with classifi cations ISO VGDIN 51506

150VDL

220VDL

320VDL

Kinematic viscosity at 100°С, mm2 / s130,0 – 160,0

12,5 – 15,5200,0 – 240,0

17,0 – 20,0300,0 – 350,0

22,0 – 25,0




230Minus 20

235Minus 20

240Minus 20

Mass fraction of sulfur, %, not more than 0,5 0,5 0,5

Oxidation stability: • Sediment, %, not more than 0,02 0,02 0.02


Color with dilution 15 / 85, CNT units, not more than 1,5


46

OIL

S

Pow

er o

ils

TS U 23.2-30802090-017-2003

Agrinol KS-19p is oil for compressor units. It is intended for lubricating of piston and rotary compressors of average and high pressure.

GOST 9243-75

Compressor oil of selective refinement KS-19 is intended for lubrication of piston and rotary compressors as well as for blast-engines.

GOST 1861-73

Compressor oils K-12 and K-19 are produced from low-sulfur crude oils and are used for lubricating piston and rotary compressors and blowers.

Index name Agrinol KS-19p KS-19 K-12 K-19

Compliance with classifi cations ISO VG

ISO 6743/3В (DIN 51506)

220DAB (VDL)

220DAA (VB)

100/150DAA (VC)

220DAA (VC)

Kinematic viscosity at 100°С,mm2/s 18–24 18–22 11–14 17–21

Viscosity index, not less than 90 92 –Acid number, mg КОН/g, within, not more than 0,03 0,02 0,15 0,04



240Minus 15

260Minus 15

216Minus 25

245Minus 5


NoneTraces

NoneNone

0,007None

Coking, %, not more than – 0,5 0,3 0,5

Oxidation stability: • Sediment, %, not more than • Acid number, мг КОН/г, not more

than

None 0,5

None 0,5

0,25–

0,015–

Corrosive effect on metals Pass – Pass

Corrosion on plates of the lead, g/m2, not more than

– 10 –


47

OIL

S

Pow

er o

ils

TS U 23.2-36451680-149:2010

Agrinol Refoil 10КS oil is designed for lubrication of compressors of household refrigeration techniques, which is running on hydrocarbon refrigerant - isobutane (R600).

GOST 5546-86

HA-30 oil is intended for lubricating of compressors of refrigeration machines running on ammonia or carbonic acid.

HF 12-16 and HF 22-24 are used for lubricating of compressors of refrigeration machines running on freon.

Index nameAgrinol Refoil 10KS

HA-30 HF 12-16 HF 22-24

Compliance with classifi cations ISO (DIN 51503) 10 (KC) 46 (KA) 22 (KC) 32 (KC)

Kinematic viscosity, mm2 / s: • At 20°С • At 40°С • At 50°С

-8,0-12,0

-

120-150-

28-32

--

Not less than 17

--

24,5-28,4

Acid number, mg КОН / g, not more than 0,02 0,05 0,02 0,04

Temperature, °С: • Open cup fl ash point, °С, not less than • Pour point, not more than • Flocculation of oil mixed with Freon,

not more than

144Minus 57

-

185Minus 38

-

174Minus 42Minus 50

130Minus 55

-

Oxidation stability: • Sediment, %, not more than • Acid number, mg КОН / g, not more than • Ash content, %, not more than

--

0,005

0,020,5

0,004

0,0050,04

-

---

Mass fraction, not more than: • Mechanical impurities, % • Water • Water soluble acids and alkalis, %

None50-

NoneNoneNone

Compressor oils for gas-transit units


48

OIL

S

Pow

er o

ils

TS U 23.2-30802090-035:2005

Agrinol MGD-14m oil is used in gas-engine compressors. It is used for lubricating of motors and compressor parts of such types of gas-engine-compressors as 8GK, 8GKM, 10 GKM, 10GKN as well as similar units running on natural gas.

Index name Agrinol MGD-14m

Kinematic viscosity at 100°С, mm2/s, not less than 13,5–15,5



220Minus 15

Mass fraction, %, not more than: • Mechanical impurities • Water • Sulphated ash

0,015Traces

0,2

Total Base Number, mg КОН/g, not less than 2


Oxidation stability: • Mass fraction of sediment in the oxidized oil,%, not more than • Acid number after oxidation, mg KOH/g, not more than

0,20,5

Stability according toIPO within 35h, viscosity increase at 100°С, %, not more than 60

Tribological characteristics on 4 balls machine at (20±5) °С,N, not less than:

• Scuff index • Critical load • Welding load

300784

1568


49

OIL

S

Pow

er o

ils

GOST 982–80

Transformer oils T-1500 and TK are sulfuric and solvent refined oils produced from low-sulfur crude oils. These products are used as oil circuit breakers (and in other high-voltage equipment as the primary insulating material).

Index name Т-1500 TK

Kinematic viscosity, mm2/s: • At 50°С • At 20°С • At minus 30°С

8–

1100

830–

Acid number, mg КОН/g, within, not more than 0,01 0,05


135Minus 45

135Minus 45

Mass fraction, %, not more than: • Mechanical impurities • Water • Phenol • Sulfur

NoneNone

––

Dielectric dissipation factor, %, not more than 0,5 (at 90°С) 2,5 (at 70°С)

Oxidation stability: • Mass fraction of sediment in the oxidized oil,%, not more than • Acid number after oxidation, mg KOH / g, not more than

None0,2

0,10,35

Тransformer oils


50

OIL

S

Pow

er o

ils

GOST 10121–76

ТSО transformer oil is used to fill transformers and other oil-filled electrical equipment.

TS U 23.2-30802090-113:2009

Agrinol GK transformer oil is used with electrical equipment of highest classes of electrical voltage.

Application temperature ranges from minus 35°С to 100°С.

Index name TSO Agrinol GK

Kinematic viscosity, mm2/s: • At 50°С • At 20°С • At minus 30°С

928

1300

9-

1200

Acid number, mg КОН/g, within, not more than 0,02 0,01


150Minus 45

135Minus 45

Mass fraction, %, not more than: • Mechanical impurities • Water • Water soluble acids and alkalis • Phenol • Sulfur

None-

None None0,6

NoneNone

---

Dielectric dissipation factor, %, not more than 1,7 0,5Oxidation stability:

• Mass fraction of sediment in the oxidized oil,%, not more than • Acid number after oxidation, mg KOH / g, not more than

None0,1

0,0150,1


51

OIL

S

Pow

er o

ils

TS U 23.2-30802090-126:2009

Agrinol KM-22 is intended for manufacturing of insulating impregnating compositions of voltage power cables of 1 – 35 kV with a paper soaked insulation. Main consumers of the oil are enterprises of electric industry.

Index name Agrinol KM-22

Kinematic viscosity at 100°С, mm2/s, not less than 22,0

Acid number, mg КОН/g, within, within 0,03


270Minus 10

Mass fraction, %, not more than • mechanical impurities • ash • water

None0,007Traces

Coking ability, %, not more than 0,6

Dielectric strength at (25 ± 10) °С and with frequency of the AC 50 Hz, MV/M, not less than 15

Volume resistivity at 100 °C and a voltage more than 100 V, Ohm·m, not less than

• in place of manufacturing • in place of consumption

2,0*1010

1,5*1010

Cable oils

REFERENCE BOOK

52

OIL

S

Indu

stria

l oils

Industrial oils

The last tendencies of continuous improvement of gearboxes and hydrodrives have special requirements for circulating oils used in machinery, commercial vehicles, special equipment and other branches of modern industry. Therefore “Agrinol” company extended its industrial line of PREMIUM-class hydraulic oils with series of zinc-free Hydroil Ultra HM oils and Agrinol Hydraulic Lift series, which provide reliable performance of hydraulic drives.

A series of Highrate XP gear oils consists of high quality oils for lubrication of heavy industrial gearboxes. Its high bearing capacity and antifriction characteristics offer exceptional performance in gears and other industrial nodes, provide equipment operation under increased flooding, high loads and temperatures.

The use of PREMIUM-series circulating oils is mostly justified in equipment, that operates at high temperatures, extreme temperature changes, cyclic loads, round the clock operation cycle.

Industrial oilsREFERENCE BOOK

53

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-114:2009

Hydroil HM-10, -22, -32, -46, -68, -80 oils are used as a working liquid for hydraulic actuators, hydraulic transmissions, and circulating oil systems of different units, low-and moderate gears and worm gears, variable, electromagnetic, and gear couplings, bearing units, sliding guides and bearings, and other sites of the machinery of modern industrial equipment. Products does not contain chlorine compounds.

Index nameHydroil HM

10 22 32 46 68 80

Compliance with classifi cations ISO VG ISO 6743 // DIN 51524.2

10HM//HLP

22HM//HLP

32HM//HLP

46HM//HLP

68HM//HLP

80HM//HLP

Kinematic viscosity at 40°С, mm2 / s 8-14 18-26 28-36 42-50 61-75 76-85

Viscosity index, not less than 108 100 98 97 94 92

Acid number, mg КОН / g, within 0,7



160-30

170-27

190-24

200-24

210-24

215-20

Ash content, %, not more than 0,2

Color with dilution 15 / 85, CNT units, not more than 1,0 1,5

Mass fraction of sulfur, %, not more than 0,5 0,8

Hydraulic oils of premium group


54

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-114:2009

Hydroil HM-100, -120, -150, -200, -270, -330 oils are used as a working liquid for hydraulic actuators, hydraulic transmissions, and circulating oil systems of different units, low-and moderate gears and worm gears, variable, electromagnetic, and gear couplings, bearing units, sliding guides and bearings, and other sites of the machinery of modern industrial equipment. Products does not contain chlorine compounds.

Index nameHydroil HM

100 120 150 200 270 330

Compliance with classifi cations ISO VG ISO 6743 // DIN 51524.2

100HM//HLP

120HM//HLP

150HM//HLP

200HM//HLP

270HM//HLP

330HM//HLP

Kinematic viscosity at 40°С, mm2/s: 90-110 110-125 148-165 186-205 265-280 320-348

Viscosity index, not less than 91 90 90 90 90 90

Acid number, mg КОН/g, within, within 0,7

Temperature, °С: • Open cup fl ash point, °С, not

less than • Pour point, not more than

220-18

220-15

225-15

230-15

230-15

240-15


Color with dilution 15:85, CNT units, not more than 1,5 2,0

Mass fraction of sulfur, %, not more than 0,8 1,0

Hydraulic oils of premium group


55

OIL

S

Indu

stria

l oils

TS U 23.2-36451680-155:2010

Agrinol Hydraulic Lift oils are designed for use as working fluids for hydraulic drives, hydraulic transmissions and circulating oil systems of different industrial units and machinery operating under extreme loads (pressures above 25 MPa).

Index nameHydraulic Lift

22 32 46 68 100

Compliance with classifi cations ISO VGISO 6743 // DIN 51524.2

22HM//HVLP

32HM//HVLP

46HM//HVLP

68HM//HVLP

100HM//HVLP

Kinematic viscosity at 40°С, mm2 / s: 18-26 28-36 41-51 61-75 90-110


Acid number, mg КОН / g, within 0,5-1,0



160-40

170-40

180-40

190-38

200-38


Color with dilution 15:85, CNT units, not more than 4,5 5,0 5,5 5,5 6,0

Mass fraction of water, %, not more than None

Mass fraction of mechanical impurities, %, not more than

None



56

OIL

S

Indu

stria

l oils

TS U 23.2-36451680-155:2010

Oil Hydroil HM Ultra is used as the working fluid for hydraulic actuators, hydraulic transmissions and circulating oil systems of different units, low-and moderately loaded gearboxes and worm gears, CVTs, electromagnetic clutches and gear, bearing units, sliding and rolling rails and the other nodes in the machinery of modern industrial equipment.

For hydraulic systems, which cannot contain Zn-based additives.

Index nameHydroil HM Ultra

22 32 46 68 100

Compliance with classifi cations ISO VGISO 6743 // DIN 51524.2

22HM//HLP

32HM//HLP

46HM//HLP

68HM//HLP

100HM//HLP


Viscosity index, not less than 100 100 100 95 91

Acid number, mg КОН / g, within 0,3


170-30

190-30

205-30

210-25

220-20


Color with dilution 15 : 85, CNT units, not more than 1,0 1,5

Tribological characteristics on 4 balls machine at (20±5) °С, not less than:

• Diameter of the wear spot (196 Н), mm, 0,4

Zinc-free hydraulic oils of premium group


57

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-102:2009

Highrate XP oil series is designed for the lubrication of all types of toothed, worm and helical gears and gear units with closed circulatory systems of lubrication. Product also can be used for the lubrication of various industrial spray equipment: metal cutting and woodworking machines, presses, casting and molding machines, rolling mills, mixers, dryers, extruders, fans, crushers, pumps, conveyors, elevators, lifts, rotary kilns, calenders, machines for paper production, coal combines, etc.

In ship equipment oil is used to lubricate gears, centrifuges, winches, windlasses, cranes, rotating machinery, pumps, hoists and lifting equipment of steering mechanism.

Index nameHighrate XP

68 100 150 220 320 460 680

Compliance with classifi cations ISO VG DIN 51517.3

68CLP

100CLP

150CLP

220CLP

320CLP

460CLP

680CLP

Kinematic viscosity at 40°С, mm2 / s: 61-75 90-110 140-

160190-240

300-350

420-510

610-750

Viscosity index, not less than 100 100 97 94 92 90 90

Acid number, mg КОН / g, within 2,0 2,0 2,5 3,0 3,0 3,5 3,5



210

-24

220

-24

225

-24

230

-18

230

-15

240

-12

245

-12


0,01Traces

0,01Traces

0,01Traces

0,02Traces

0,03Traces

0,03Traces

0,05Traces

Tribological characteristics on 4 balls machine (20±5)°С:

• Scuff index, Н, not less than • Index of wearout (196Н), mm,

not more than

3920,45

3920,45

3920,45

4900,45

4900,40

4900,45

4900,45

Gear oils premium group


58

OIL

S

Indu

stria

l oils

TS U 23.2-36451680-166:2010

Special Oil ART gear oils are designed for lubrication of all types of toothed, worm and helical gears of various industrial equipment: metal cutting and woodworking machines, hammers, presses, casting and molding machines, winches, rolling mills, overhead cranes, conveyors, elevators, lifts, rotary cement ovens, calenders, equipment for the manufacture of paper, coal combines, textile and spinning machines and other equipment where high loads do not allow using of oil without additives.

Index name Special Oil ART


68 100 150 220 320 460 680

68CLP

100CLP

150CLP

220CLP

320CLP

460CLP

680CLP

Kinematic viscosity at 40°С, mm2 / s: 61-75 90-

110140-160

200-240

300-340

430-490

650-710


Acid number, mg КОН / g, not more than 0,05

Color with dilution 15 / 85, CNT units, not more than 3,0 4,0 5,0 6,0



210-20

220-18

240-15

250-12


0,01Traces

0,015Traces

0,02Traces

Stability against oxidation: • Changes in viscosity at 40оС, %,

not more than • Changes in acid number, mg

КОН / g, not more than

3

0,15

Tribological characteristics on 4 balls machine at (20±5) °С,N, not less than

• Scuff index, N, not less than • Index of wearout (196Н), mm,

not more than

4900,5


59

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-097:2008

Industrial oils Agrinol I100PV are intended for lubricating of liquid friction bearings of roller mills, equipped with circulating lubrication systems with long pipelines and branching, as well as with the oil line of small diameter, where ingress of water is possible.

The main consumers of oil are companies of steel industry.

Index name Agrinol İ100PV Agrinol İ100PVs

Compliance with classifi cations ISO VG DIN 51517.1 // 51517.2 100 C, CL 100 C, CL

Kinematic viscosity, mm2/s:• At 40°С• At 100°С

90,0-110,010,0-12,0



205-10

Mass fraction, %, not more than:• Mechanical impurities• Water• Sulfur

0,01Traces0,35

0,01Traces

0,6

Acid number, mg КОН / g, not more than 0,05 0,1

Demulsifi cation number, min., not more than 13

Stability against oxidation, not more than: • Increase in Acid number, mg КОН/g,

withinStability against oxidation, not more than:

0,30 0,50

For rolling mills


60

OIL

S

Indu

stria

l oils

GOST 12672–77

PS-28 is an oil, intended for lubrication of heavily loaded rolling mills with a circulating lubrication systems (other than liquid friction bearings).

TS U 23.2-30802090-011:2002

Agrinol PS-20 and Agrinol PS-28z oils are used as lubricating oils for circulating greasing of systems of rolling mills, reducers, rolling equipment units of average and heavy loading, equipment of tyre factories etc. (except bearings of fluid friction).

Index name PS-28Agrinol PS-20 Agrinol PS-28z

Mark A Mark B Mark A Mark B


460CV

320C

460C

Kinematic viscosity at 100°С, mm2/s, not less than 26-30 18-23 26-31


Acid number, mg КОН / g, not more than 0,02 0,03 0,04 0,02 0,04


250-10

250-12

250-12

Mass fraction, %, not more than:• Mechanical impurities• Water

NoneNone

Mass fraction of sulfur, %, not more than 1,5 0,6 1,0 0,7 1,0

Coking ability, %, not more than - 0,8 0,8



61

OIL

S

Indu

stria

l oils

TS U 23.2-36451680-147:2010

Agrinol İNSp oil series is designed for lubrication of sliding and rolling machine tools, heavy gears of drive screws of especially high precision with program control, which require uniformity of the slow movement, accuracy and sensitivity of the displacement tables.

Oil Agrinol INSp-110 is designed for the lubrication of slideways of vertical and horizontal slideways with vertical faces of large area for gear and worm gears, ratchet mechanisms.

Index name Agrinol İNSp-20

Agrinol İNSp-40

Agrinol İNSp-65

Agrinol İNSp-110

Compliance with classifi cations ISO VG (ISO 6743) 32 (G) 68 (G) 100 (G) 220 (G)

Compliance of brands with oils-equivalents - İ-N-E-68 İ-N-E-100 İ-N-E-220

Kinematic viscosity at 40°С, mm2 / s: 20-30 50-70 100-110 175-200



190-20

210-15

Mass fraction of water, %, not more than Traces


Ash content, %, within 0,15-0,25

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than• Scuff index• Critical load• Welding load

286720

1960

333780

2200

355872

2200

3728722450

Oils for slideways


62

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-008:2002

Agrinol PZhT oil series is designed for lubrication of horizontal and vertical liquid friction bearings of rolling mills equipped with circulating systems with pipe-lines of various lengths and branching with possible irrigation.

Index name Agrinol PJT-46

Agrinol PJT-220

Agrinol PJT-460

Agrinol PJT-460U

Compliance with classifi cations ISO VG DIN 51517.1, 51517.2 46 C, CL 220 C, CL 460 C, CL 460 C, CL


Viscosity index, not less than 95 90 90 95



180-10

220-10

240-10

250-15

Coking ability, %, not more than 0,2 0,5 1,0 1,0

Demulsibility: • Time of emulsion separation, min, not more

than• Amount of layers: oil-water-emulsion,cm3

2042-36-2

2042-36-2

3042-36-2

1542-36-2

Stability against oxidation, not more than: • Viscosity change, %• Acid number change, mg КОН/g

50,1

100,15

100,4

100,4

Mass fraction of sulfur, %, not more than 0,6 0,6 0,6 0,5


• Wearout index (196Н), mm, not more than • Welding load

0,75-

0,75-

0,75-

0,42067

Oils for liquid friction bearings


63

OIL

S

Indu

stria

l oils

GOST 6411–76

Heavy cylinder oils – petroleum oils, are intended for lubricating of the reciprocating steam engines of different purposes, working in superheated steam (C-38 up to 350°С, C-52 up to 400°С) under heavy loads and low speeds.

Index name Cylinder oil 38 Cylinder oil 52

Kinematic viscosity at 100°С, mm2/s, not less than 32-50 50-70



300-8

310-5

Mass fraction, %, not more than:• Mechanical impurities• Water• Water soluble acids and alkalis

None0,05None

0,070,05None



Ash content, %,not more than 0,015 0,01



64

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-013:2003

Agrinol МS-20 oil does not contain active additives. It is intended for the usage in industrial equipment of rolling mills, reducers and other equipment of metallurgical, mining, woodworking enterprises. For terrestrial applications.

Agrinol МS-20p and Agrinol МS-20ps oils are generally used as lubricating oils in those cases when high requirements to exploitation properties, especially for anti-deterioration and washing properties of oils are necessary.

Agrinol MS-20gk is intended for use as grease in the lubricating system of gas motor compressors 10GKNA, MK8 and / or in other similar units. Oil consumers are enterprises of metallurgy, mining, mining and timber industries, paper manufacturing companies.

Index name Agrinol MS-20

Agrinol MS-20p

Agrinol MS-20ps

Agrinol МS-20gk

Kinematic viscosity at 100°С, mm2/s, not less than 20,5 20 20 20,5

Viscosity index, not less than 85 85 85 85


TBN, mg КОН/g, not less than - Not less than 0,9

Not less than 1,5

Not less than 0,9


240-13

230-15

230-15

250-15

Coking of oils, %, not more than 0,3 0,3 0,5 0,3

Sulphated ash, %,not more than - 0,25 0,25 -

Mass fraction, %:• Mechanical impurities, not more than• Water, not more than• Sulfur in base oil, not more than• Calcium, not less than

NoneTraces

0,7-

0,01None0,7

0,08

0,015None1,00,1

NoneNone0,5-

General purpose oils


65

OIL

S

Indu

stria

l oils

GOST 20799–88

Industrial oils I-5А, I-8А, I-12А, I-12А1 are refined distillate and residual oils or it’s mixtures without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. These products can also be used as hydraulic liquids.

Index name İ-5A İ-8A İ-12A İ-12A1




140-18

150-15

170-15

165-30


• Solvents in refi ned oils

NoneTracesNone


Ash content, %, not more than 0,005 0,005 0,005 0,005

Stability against oxidation: • Increase of Acid number, mg КОН/g, with-

in, not more than • Increment of resins, %, not more than

0,201,5

0,201,5

0,201,5

0,201,5

Color, CNT units, not more than 1,0 1,5 1,5 2,5

Industrial petroleum oils


66

OIL

S

Indu

stria

l oils

TS U 23.2-30802090-061:2006

Industrial oils I-20А, I-30А, I-40А, I-50А are refined distillate and residual oils or it’s mixtures without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. These products can also be used as hydraulic liquids.

Index name I-20А I-30А I-40А I-50А

Kinematic viscosity at 40°С, mm2/s 29–35 41–51 61–75 90–110

Acid number, mg КОН/g, within, not more than 0,03 0,05 0,05 0,05


200- 15

210- 15

220- 15

225- 15

Mass fraction, %, not more than: • Mechanical impurities • Water • Solvents in refi ned oils

NoneTracesNone



Stability against oxidation: • Increase of Acid number, mg КОН/g,

within, not more than • Increment of resins, %, not more than

0,30

2,0

0,40

3,0

0,40

3,0

0,40

3,0

Color, CNT units, not more than 2,0 2,5 3,0 4,5

Heat-treatment oilsREFERENCE BOOK

67

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-023:2004

Agrinol MZ-8 is used for heat-treatment of components of medium - carbon and cemented steels.Agrinol MZ-16 is used for heat-treatment steel parts in the temperature range: 30 … 70°C.Agrinol MZ-38 is used for heat-treatment steel parts in the temperature range: 50 … 100°C.Agrinol MZ-90 is used for heat-treatment steel parts in the temperature range: 70 … 140°C.Agrinol MZ-120 is used for heat-treatment steel parts in the temperature range: 120 … 180°C.

Index name Agrinol MZ-8

Agrinol MZ-16

Agrinol MZ-38

Agrinol MZ-90

Agrinol MZ-120


Acid number, mg КОН / g, not more than 0,5 0,5 0,5 0,5 0,5



140

-25

160

-15

180

-15

210

-12

235

-12


NoneNone

Coking ability, %, not more than 0,2 0,3 0,4 0,4 0,4

Oxidation stability, not more than: • Changes in viscosity, %• Acid number, mg КОН / g, not more

than

50,1

100,15

100,2

100,2

100,2


68

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-074:2008

Heat-treatment oils Agrinol MZM possesses elevated antioxidant properties and are used for hardening of metals.

Index name Agrinol MZM-16

Agrinol MZM-26

Agrinol MZM-120

Kinematic viscosity at 50°С, mm2/s: 14,5-19,0 23,5-27,0 109,0-120,0

Viscosity index, not less than - 85 85


Saponifi cation number, mg КОН/g, not more than 0,05


170-12

200-12

240-12

Coking ability, %, not more than 0,15 0,2 0,5

Color, CNT units, not more than 3 5 7


0,01Traces

0,01Traces

0,01Traces

Oxidation tests: • Weight loss, %, not more than • Kinematic viscosity at 50°С, mm2/s, not more than • Coking, %, not more than • ownward change the fl ash point in closed crucible,

°С, not more than

1022,50,30

1030,50,40

3134,00,95

0


69

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-082:2009

Agrinol Termol heat-treatment oil is designed for quench cooling of steel products made of low-alloy and alloy steels, in order to obtain high hardness values, of the required structure and clean surface.

Index name Agrinol Termol

Kinematic viscosity at 40°С, mm2 / s: 25-36


Flash point in open crucible, °С, not less than 180




0,026Traces

Oxidation resistance (oxidized oil properties): • Weight loss, %, not more than • Kinematic viscosity at 40°С, mm2/s, within • Coking, %, not more than • Flash point in open crucible, °С, not less than

724-400,45180


70

OIL

S

Hea

t-tr

eatm

ent o

ils

ТУ У 23.2-30802090-090:2008

Oil Agrinol AMT-300 is designed for use as a coolant in closed systems of production, which avoids contact with hot air.

The maximum temperature of the oil Agrinol AMT-300 under the intense forced circulation is not more than 280°C.

Наименование показателя АМТ-300Kinematic viscosity at 100°С, mm2/s, not less than: 5,9

Acid number, mg КОН per 1g of oil, not more than 0,03

Temperature,°С: • open cup flash point, °С, not lower than • auto-ignition point, minimum, not less than • pour point, °С, not higher than

175285–30

Mass fraction, %, not more than: • of mechanical impurities • of water

NoneNone


The refractive index, not less than 1,54

Fractional composition,°C, not less than: • 5% (of volume) boil over • 95% (of volume) boil over

330475

Density at 20°С, kg/m3, not more than 960


71

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-031:2006

Vacuum petroleum oils of Agrinol VM series are used as the working fluid for mechanical vacuum pumps.

Agrinol VМ-1 oil is used as a working liquid in high-vacuum steam-jet pumps of BN-3 series, which work at the residual pressure from 1*10-3 to 1*10-6 mm of mercury.

Agrinol VМ-3 is used as a working liquid in high-production oil-vapor booster pumps which work at the residual pressure from 1*10-2 to 1*10-4 mm of mercury.

Agrinol VМ-4 oil is used as a working liquid in mechanical vacuum pumps with oil seal.

Index name Agrinol BM-1

Agrinol BM-3

Agrinol BM-4


60-70-

8-11-

48-578-11


Temperature, °С:• Open cup fl ash point, °С, not less than• Open cup fl ash point, °С, not less than• Pour point, not more than

230-

-12

150-

-12

235205-15


Fractional composition of oil, °С:• Temperature of the beginning of the distillation, not

less than• 90% of the oil distilled at a temperature not higher

than• The end of the boil, not more than

-

-

-

95

175

-

370

-

515

Vapor pressure at 20°С, Pa, not more than 5,3·10-6 1,33·10-2 5,3·10-3


Vacuum oils


72

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-031:2006

Agrinol VM-5 oil is used as the working fluid in a high-vacuum steam jet pumps, which operate at a residual pressure of 1*10-3 to 1*10-7 mm Hg. of Art.

Agrinol VM-6 used as a lubricating material and seal for piston backing pumps, working at a residual pressure of 1*10-3 mm Hg. of Art.

Agrinol VM-11 oil is used as the working fluid in a high-performance steam booster, auxiliary and steam-jet and special fore-vacuum pumps.

Index name Agrinol BM-5

Agrinol BM-6

Agrinol BM-11

Kinematic viscosity, mm2/s: • At 20°С, not more than • At 50°С, not more than • At 100°С, not more than

-60,0-74,0

-

220408

-12,5-15,8

-



230-12

216-10

170-12


Fractional composition of oil, °С:• The temperature of the beginning of the

distillation, not less than• 90% of the oil distilled at a temperature not

higher than

-

-

125

220

80

175

Vapor pressure at 20°С, Pa, not more than Not more than

2,7·10-5

Not more than

4,0·10-4

6,7·10-3 - 1,3:10-4


Oil heat transfer fluid


73

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 23.2-30802090-050:2006

Agrinol MP and Agrinol MP Plus flushing oils are designed for irrigation of automotive engine lubrication systems without disassembly (while replacement of oil).

TS U 23.2-30802090-080:2008

Flushing liquid Agrinol MPT-2M is used for flushing of lubrication systems of diesel engines (diesel, marine, automotive, road and construction equipment, etc.), as well as gasoline engine cars and trucks without disassembly while fluid replacement.

Index name Agrinol MP Agrinol MP Plus Agrinol MPT-2m

Kinematic viscosity at 50°С, mm2/s: 9-12 12-23 18-22



140

-15

140

-15

160

-15

Mass fraction, %, not more than:• Mechanical impurities• Water• Sulphated ash

0,01Traces

1,2

0,01Traces

1,2

0,015Traces

0,5

Mass fraction of active elements, %, not less than: • Calcium• Zinc

0,20,1

0,2Not specifi ed

--

TBN, mg КОН/g, not less than Not specifi ed 4,0 -


• Wearout index (196 Н), mm, not more than

• Welding load • Scuff index

0,4

––

Not specifi ed

––

-

2067398

Flushing oils


74

OIL

S

Hea

t-tr

eatm

ent o

ils

GOST 10877–76

Conservation oil K-17 is used for long-term protection of ferrous and nonferrous metals (as well as the mechanisms that are stored under cover) against atmospheric corrosion.

TS U 23.2-30802090-111:2009

Agrinol Gun Oil VO and Agrinol Gun Oil RG oils are designed for short-term protection of metal surfaces from corrosion and as lubricating oils for unloaded nodes.

Temperature of application: Agrinol Gun Oil VO — above 5 °C, Agrinol Gun Oil RG — up to minus 50 °C.

TS U 23.2-30802090-111:2009

Conservation oil Anticor-270 is intended for long-term protection against corrosion inside and outside surfaces of mechanical engineering products, rolled steel, semi-finished products and parts made of ferrous metals and their alloys, which are stored under cover or in the package.

Index name Agrinol Gun Lodge VO

Agrinol Gun Lodge RG К-17 Anticor-270

Kinematic viscosity, mm2/s: • At 100°С, not less than • At 50°С, not less than • At minus 50°С, not more

than

9,060,0

–

–6,0

1500

15,5–21,0––

–27-35 (40°С)

–

Pour point, °С, not more than – Minus 60 Minus 22 Minus 10

Mass fraction, %, not more than:

• Mechanical impurities • Water • Free alkalis in NaOH

equivalent

0,05None

–

0,07None0,05

–Traces

–

Ash content, % – 1,35–2,40 –

Protective properties –0 (%, area

of corrosion damage)

Pass Pass

Conservative oils


75

OIL

S

Hea

t-tr

eatm

ent o

ils

TS U 24.6-30802090-106:2008

Oil-divider Form Divider is used as a release agent in continuous casting machines for rolled metal, also used in the manufacturing of polygon profiles by hot continuous casting.

Index name Form Divider Form Divider M

Kinematic viscosity, mm2/s: • At 40°С • At 100°С, not less than

45-657,5

40-807,5



230-12

230-12

Mass fraction, %, not more than:• Mechanical impurities• Water• Sulfur

0,015Traces

1,0

0,015Traces

1,0

Color, CNT units, not more than 5 6

Coking ability, %, not more than 0,15 0,15

Saponifi cation number, mg КОН/g, not more than 50-65 45-70

Density at 20°С, kg/m2, not more than 900 930

Release agent Form Divider


76

OIL

S

Hea

t-tr

eatm

ent o

ils

GOST 1805–76

Mineral sulfur-purificated instrumental oil MVP is used for lubrication of control and measuring devices, (working in temperature range from minus 60 °С to 110 °С), for filling the pneumatic shock absorbers with petroleum and in the process of lubricants manufacture.

GOST 18375-73

Lubricating oil 132-08 is designed for lubrication of bearings in various devices and friction units of machines, operating in temperature range from minus 65-70 °С to plus 70 °С.

Index name MVP 132-08Kinematic viscosity, mm2/s:

• At 20°С • At 50°С • At minus 50°С, not less than

-6,5-8,0

-

47-55-

2200




125-60

173-70

Mass fraction, %, not more than:• Mechanical impurities• Water• Water soluble acids and alkalis

NoneNoneNone

None0,005

-

Ash content, %,not more than 0,005 -

Color, CNT units, not more than 1,5 -

Instrumental oils

REFERENCE BOOK

78

OIL

S

REFERENCE BOOK

79

Grea

se

Along with traditional lubricant materials, new industrial grease developments of “Agrinol” company are able to provide the operation of mechanisms for many different conditions: shock loads, high speeds, high humidity, extreme temperatures, etc.

Our researches and developments in such areas as friction, wearing and lubrication always take the needs of our clients on economic and environmental optimization into account.

High-performance lubricants, both standard and exclusive, must be selected specifically according to their tasks. No matter how unfavorable conditions of the working environment are, you will surely find a decent Agrinol lubricant suitable for the solution of your task.

Grease

REFERENCE BOOK

80

Grea

se

Along with traditional lubricant materials, new industrial grease developments of “Agrinol” company are able to provide the operation of mechanisms for many different conditions: shock loads, high speeds, high humidity, extreme temperatures, etc.

Our researches and developments in such areas as friction, wearing and lubrication always take the needs of our clients on economic and environmental optimization into account.

High-performance lubricants, both standard and exclusive, must be selected specifically according to their tasks. No matter how unfavorable conditions of the working environment are, you will surely find a decent Agrinol lubricant suitable for the solution of your task.

REFERENCE BOOK

81

Grea

se

TS U 30802090.001-2000

Agrinol Solidol G greases can be used as summer and winter lubricants in almost all industrial mechanisms, friction units of vehicles, agricultural equipment, hand tools, in rolling and sliding bearings, hinges, screw and chain drives, low-speed gearboxes.

Index nameAgrinol Solidol

G-0 G-1 G-2 G-3

Compliance with classifi cations NLGIDIN 51502

0G0C-25

1K1C-25

2 / 3K 2 / 3 C-25

3K3C-25

Appearance Homogenous ointment with a smooth texture from light yellow to dark brown color.

Thickener Са

Operating range, min…max, °С –25 … +65

Dropping point, °С, not less than 90 90 93 95Penetration at 25°С, mm·10−1 340 – 385 295 – 350 230 – 300 200 – 245

Shear strength at 50°С, Pa, not less than 100 120 150 200

Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa·s, not more than

230 260 330 370

Colloid stability, % of secreted oil, not more than 13 12 11 10

* The index is determined by the manufacturer prior to the introduction of filler

General-purpose lubricantsfor standard temperatures

REFERENCE BOOK

82

Grea

se

GOST 3333–80

Graphite grease is intended for lubrication of hard heavy-loaded mechanisms (open gearboxes, screw joints, guide screws, jacks, springs, etc.).

Lubricant is efficient at the temperatures lower than minus 20°С in springs and other similar mechanisms.

Index name Graphite grease


2OGF 2 G-20

Appearance Homogeneous thick black ointment with a silvery tinge

Thickener Ca

Operating temperature range, min…max, °С -20 (-30)...+60

Dropping point, °С, not less than 77

Penetration at 25°С, mm·10−1 Not less than 250

Shear strength at 50°С, Pa, not less than 100*

Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa·s, not more than 100*

Colloid stability, %, not more than 5

* The index is determined by the manufacturer prior to the introduction of filler.


REFERENCE BOOK

83

Grea

se

Gen

eral

-pur

pose

lubr

ican

ts


Red calcium grease - rough friction units of rolling and sliding of machines and mechanisms of vehicles, agricultural machines, hand tools, screw and chain drives, low-speed gear reducers, etc.

Green rubber grease - rough friction units of rolling and sliding of machines and mechanisms of vehicles, agricultural machines, hand tools, screw and chain drives, low-speed gear reducers, etc. Contain rubber.

Index name Green Rubber Grease Red Calcium Grease


2K2C-25

3K3C-25

2K2C-25

3K3C-25

Appearance Homogenous ointment with a smooth texture

from light to dark green color.

Homogenous ointment with a smooth texture

from pink to cherry color.

Operating temperature range, min…max, °С -25 … +65 -25 … +65

Thickener Са + rubber Са

Dropping point, °С, not less than 93 95 93 95

Penetration at 25°С, mm·10−1 265-295 220–250 265-295 220–250

Shear strength at 50°С, Pa, not less than 150 200 150 200

Colloid stability, %, not more than 11 10 11 10

REFERENCE BOOK

84

Grea

se

Gen

eral

-pur

pose

lubr

ican

ts

General-purpose lubricants

ТУ У 24.6-36451680-148:2010

Series of Molyroll EP multipurpose greases is intended for lubrication of different friction units of industrial equipment and vehicle mechanisms (all types of antifriction bearings, including sliding, rolling bearings and swivel joints (constant-velocity joints) etc.), that operates under conditions of high loads, vibrations and extreme pressures.

Molyroll EP 1 grease with a low-temperature flow is designed for centralized lubrication systems of friction units of casting, forging, pressing и other industrial equipment and machinery.

Molyroll EP 2 and EP 3 are embedded greases for different machinery and equipment.

Наименование показателя Molyroll EP1

Molyroll EP2

Molyroll EP3

Соответствие классификациям NLGIDIN 51502

1KF1K-40

2КF2K-40

3КF3K-40

Appearance Homogeneous smooth ointment colored from light gray to black

Thickener Li-K

Operating temperature, °С –40…+120

Worked penetration at 25°С (60 double strokes), m * 10-4, within 310-340 265–295 220–250

Shear strength at 50°С, Pa, not less than 150 200 300

Colloid stability, % of separated oil, not more than 20,0 15,0 12,0

Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa·s, not more than 1500 1500 (25°С) 1600 (25°С)

Evaporation at 150°С for 1 hour, %, not more than 5,0

Tribological characteristics on 4 balls machine at (20±5) °С, H, not less than

• welding load, 3685 3685 3685

Dropping point, °С, not less than 185 190 190

Mass fraction of free alkalis in NaOH equivalent, %, mg КOH / g, not more than 0,2

REFERENCE BOOK

85

Grea

se

Aut

omot

ive

lubr

ican

ts

Automotive lubricants

TS U 23.2-30802090-040:2005

Grease Agrinol ShRUS - 4 is used for lubricating the constant velocity (CV-) joints of front wheel drive cars, cars with four-wheel drives, and double-row ball bearings, which are used in the nodes of the hubs of cars VAZ, ZAZ and AZLK.

TS U 23.2-30802090-079:2007

Agrinol Fiol-2U is used for greasing of needle bearings and spline joints of trunnion of driveshaft for VAZ cars and other vehicles.

Index name Grease Agrinol Fiol -2U Grease Agrinol ShRUS -4

Compliance with classifi cations NLGIDIN 51502 2 (KPF2N-40) 2 (KPF2K-40)

Appearance Silver-black homogenous ointment

Homogenous ointment colored from dark-grey to black

Thickener Li

Operating temperature range, min…max, °С -40..+120 (+130) -40..+120

Dropping point, °С, not less than 185 190

Penetration at 25°С, mm·10−1 255-295 250-280


1800 (-30ºC)

Shear strength, Pa, within:• At 20°С • At 80°С

300-800-

300-700Not less than150

Colloid stability, %, not more than 12 16

Tribological characteristics on 4 balls machine at (20±5) °С, Н, not less than:• Welding load• Critical load• Scuff index

2450980470

49001098559

Automotive lubricantsREFERENCE BOOK

86

Grea

se

Aut

omot

ive

lubr

ican

ts

TS U 23.2-30802090-062:2006

Agrinol №158 greases are used for lubrication of roller bearings of automotive and tracktor equipment, needle bearings of cardan joints of unequal angular velocities. Agrinol №158M is distinguished by improved anti-wear characteristics and is recommended for usage in friction units with increased loads and low sliding speeds, such as constant velocity joints, and front-wheel-drive vehicles as well as in two-row ball bearings, which are used in hub nodes of cars.

TS U 23.2-30802090-043:2005

Agrinol ShRB-4 grease is used as an immutable in ball joints of front suspension, tips of rods of cars steering. Grease is characterized by high water resistance.

Index name Agrinol No158

Agrinol No158M Agrinol ShRB-4


1/2KF 1/2 K-30

1/2KF 1/2 K-30

2K2K-40

Appearance Smooth homogenous ointment from blue to dark-

blue color

Slightly fi brous homogeneous dark

brown ointment without secondary inclusions

Thickener Li-K K-Ba

Operating temperature range, min…max, °С -30..+110 -40..+130


Penetration at 25°С, mm·10−1 265-320 240-320 265-295


400 (0ºC) 800 (-20ºC)

Shear strength, Pa, within: • 20ºC• 50 ºC

-160

-130

200-

Colloid stability, %, not more than 18 21 10


-617

-

1842784343

1960588590

REFERENCE BOOK

87

Grea

se

Mul

ti-pu

rpos

e lu

bric

ants

Multi-purpose lubricants

TS U 23.2-36451680-127:2011

Ligrease grease series is designed for lubrication of various friction units of industrial equipment and machinery vehicles that operate at medium loads.

Ligrease 00 is used for the lubrication of enclosed gears and chain drives, bearings of gearboxes with insufficient sealing.

Ligrease 0 is designed for use in centralized lubrication systems continuously.Ligrease 1 is designed to lubricate the chassis and transmissions of passenger

cars, light and medium trucks, as well as friction units of industrial equipment, which is operating under heavy loads, vibration and extreme pressure.

Ligrease 2 and Ligrease 3 are used as mortgage greases.

Index name Ligrease 00 Ligrease 0 Ligrease 1

Compliance with classifi cations NLGI,DIN 51502

00K00G-30

0K0G-30

1K1K-40

Appearance Smooth homogenous ointment from light yellow to brown color.

Thickener LiOperating temperature range, min…max, °С –30…+100 –30…+110 –40…+120


Penetration at 25°С, mm·10−1 380 – 430 340 – 380 310 – 340

Shear strength at 50°С, Pa not specifi ed 100 (20°С) 150

Colloid stability, %, not more than 35** 30 20


Mass fraction of mechanical impurities, %, not more than None

Water content, %, not more than Traces** The index is determined under a 200g load.

Multi-purpose lubricantsREFERENCE BOOK

88

Grea

se

Mul

ti-pu

rpos

e lu

bric

ants

TS U 23.2-36451680-127:2011

Ligrease grease series is designed for lubrication of various friction units of industrial equipment and machinery vehicles that operate at medium loads.

Ligrease 2 and Ligrease 3 are used as mortgage greases.

Index name Ligrease 2 Ligrease 3


2K2K-30

3K3K-30

Thickener Li

Operating temperature range, min…max, °С –30… +120 (+130)

–30 (-40)+120 (+130)


Penetration at 25°С, mm·10−1 265 – 295 220 – 250

Shear strength at 50°С, Pa 200 300

Colloid stability, %, not more than 15 12Mass fraction of free alkalis in NaOH equivalent, %, mg КOH / g, not more than 0,2


Water content, %, not more than Traces

** The index is determined under a 200g load.


89

Grea

se

Mul

ti-pu

rpos

e lu

bric

ants

TS U 23.2-36451680-127:2011

Ligrease ЕР grease series is designed for lubrication of friction units of various industrial equipment and machinery vehicles that operate at high loads, where elevated EP properties are needed.

Ligrease ЕР 00 is designed for the lubrication of earboxes and gear drives, rolling and sliding bearings, in centralized lubrication systems.

Ligrease ЕР 0 is recommended for the lubrication of heavily loaded gearboxes and gear drives, in centralized lubrication systems of vehicles and industrial equipment.

Ligrease ЕР 1 is a lubricant with a low-temperature fluidity designed for centralized lubrication systems of friction units for casting, forging and other industrial equipment operating under heavy loads, vibration and extreme pressure.

Index name Ligrease ЕР 00

Ligrease ЕР 0

Ligrease ЕР 1


00KР00К-30

0KР0К-30

1KР1K-40


Thickener Li+ЕР

Operating temperature range, min…max, °С –30…+120 –30…+120 –40…+120


Penetration at 25°С, mm·10−1 380 – 430 340 – 380 310 – 340

Shear strength at 50°С, Pa not specifi ed 100 (20°С) 150

Colloid stability, %, not more than 35** 30 20



Water content, %, not more than TracesTribological characteristics on 4 balls machineat (20±5) °С, Н, not less than:

• welding load 2607 2607 2607

** The index is determined under a 200g load.


90

Grea

se

Mul

ti-pu

rpos

e lu

bric

ants

TS U 23.2-36451680-127:2011

Ligrease ЕР grease series is designed for lubrication of friction units of various industrial equipment and machinery vehicles that operate at high loads, where elevated EP properties are needed.

Ligrease ЕР 2 and Ligrease ЕР 3 are used as mortgage.

Index name Ligrease ЕР 2 Ligrease ЕР 3


2KР2K-30

3KP3K-30


Thickener Li+EP

Operating temperature range, min…max, °С –30…+130 –30…+130

Dropping point, °С, not less than 190 190Penetration at 25°С, mm·10−1 265 – 295 220 – 250

Shear strength at 50°С, Pa 200 300

Colloid stability, %, not more than 15 12Mass fraction of free alkalis in NaOH equivalent, %, mg КOH / g, not more than 0,2


Water content, %, not more than Traces

Tribological characteristics on 4 balls machine at (20±5) °С,N, not less than

• welding load 2764 2764

** The index is determined under a 200g load


91

Grea

se

Mul

ti-pu

rpos

e lu

bric

ants

TS U 23.2-30802090-014:2002

Agrinol 1-13 is universal anti-frictional non-waterproof sodium-calcium grease.

Grease is used for lubricating of rolling and sliding friction units of machines and mechanisms working at the temperature from minus 20°С to 110°С. Grease remains efficient in rather powerful mechanisms at the temperature down to minus 40°С.

Grease can be supplied to friction units by the superchargers or by the mortgage way.

GOST 1957–73

Universal refractory non-waterproof greases Konstalin-1 and Konstalin-2 are used for lubrication of fan friction units of casting machines, blast furnaces and cement kilns, roller bearing on the rail transport.

Index name Agrinol 1-13 Konstalin-1 grease

Konstalin-2 grease


3/4K 3/4 H-20

2/3K 2/3 H-20

3/4K 3/4 H-20

Appearance Homogeneous ointment from

light yellow to dark brown color

Thickener Na-Ca Na

Operating temperature range, min…max, °С -20...+110



Shear strength at 80°С, Pa, not less than 100-400 -


500 -

Colloid stability, %, not more than 18 -


for standard and high temperatures

REFERENCE BOOK

92

Grea

se

Indu

stria

l lub

rica

nts

Industrial lubricantsWater-resistant

TS U 23.2-30802090-132:2009

SKS 300 m are multi-purpose, heat-resistant, waterproof sulfonate-calcium greases that are recommended for lubricating of industrial equipment bearings, working under the high loads, high temperatures and water contact.

Lubricants of SKS 300 m-1 and SKS 300 m-1* brands can be used in centralized lubricating systems and devices with forced feeding of lubricants in friction units. Lubricants branded as SKS 300 m-2 and SKS 300 m-2* are recommended for lubrication of embedded bearings.

The types of greases, marked with asterisks differ only in color (red).

Index name SKS-300 m-1

SKS 300 m-1*

SKS-300 m-2

SKS 300 m-2*


1/2KP1/2R-25

2KP2R-20

Appearance Homogenous smooth brown ointment

Homogenous smooth red ointment

Thickener Са Sulfonate complex




Shear strength at 50°С, Pa, not less than 120 200


Evaporation at 120°С, %, not more than 2 1,5

Water resistance, class, not less than 2 1,5

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 800 (-10ºC) 1100 (-10ºC)

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than:• Welding load• Critical load• Deterioration rate (196 Н), mm, not more

than

413612300,5

Industrial lubricantsREFERENCE BOOK

93

Grea

se

Indu

stria

l lub

rica

nts

GOST 20.5-32365441-207:2016TS U 23.2-30802090-126:2009

PELLETON EP, PELLETON LX - water-resistant high-temperature greases. Specially designed for use in a wide range of temperatures and high load in bearing pellet presses in joints and mechanisms of industrial, metallurgical, mining and extraction equipment, ceramic production, tunnel furnaces, hot conveyors; auto tractor, agricultural and road machinery.

Index name PELLETON EP

PELLETON EP

PELLETON LX

PELLETON LX

Match classifi cationNLGI

ISO 6743-9DIN 51502

1L-XBDHB 1KP1N-25

2L-XBDHB 2 KP2N-20

1L-XBDHB 1

KP1R-25

2L-XBDHB 2

KP2R-30

Thickener k-Ca k-Li

Application temperature, °С -20 … 150(170) -25(-30) ... +170 (180)

Appearance Homogeneous smooth ointment from light yellow to brown color

Penetration at 25 °C with stirring (60 double strokes) m 10-4,within 310-340 265-295 290-340 265-295

Dropping Point, °C, not lower than 230 250Volatility,%, not more 3

Shear strength, Pa, not less than: • at 50°С • at 80°С

100-60080-600

200200

100-

150

-

Effective viscosity at 0 °C and average gradient of the strain rate pass of 10 s-1 Pass, no more than

110 160 1600(-20 °С) 2000(-20 °С)

lubricating properties at the 4-ball machine at (20 ± 5) ° C, N, not less than:

• Welding load; • critical load; • scuff index

61741098684

3087980440

Water resistance grade, not less than 1B



94

Grea

se

Indu

stria

l lub

rica

nts

GOST 20.5-32365441-207:2016TS U 23.2-30802090-126:2009

PELLETON SKS - water-resistant high-temperature grease. Specially designed for use in a wide range of temperatures and high load in bearing pellet presses in joints and mechanisms of industrial, metallurgical, mining and extraction equipment, ceramic production, tunnel furnaces, hot conveyors; auto tractor, agricultural and road machinery.

Index name PELLETON SKS PELLETON SKS

Match classifi cation NLGIISO 6743-9 DIN 51502

1KP1S-25

2KP2S-20

Thickener Ca Sulfanate complex

Application temperature, °С -25 … +200

Appearance Homogeneous smooth ointment from light yellow to brown color

Penetration at 25 °C with stirring (60 double strokes) m 10-4, within 280-320 250-280

Dropping Point, ° C, not lower than 300Volatility,%, not more 2 1,5

Shear strength, Pa, not less than: • - at 50°С 120 200

Effective viscosity at -10°C and average gradient of the strain rate of 10 s-1 , no more than

800 1100

lubricating properties at the 4-ball machine at (20 ± 5) ° C, N, not less than:• Welding load;

4136 -

Water resistance grade, not less than 1B



95

Grea

se

Indu

stria

l lub

rica

nts

ТS U 20.5-32365441-192:2014

Agrinol Polynol EP recommended for extreme pressure lubrication of industrial bearings in chemical, paper industry, casting and rolling mills, high loaded slider bearings, frictionless bearings and ball-bearings, when long life lubricating is needed: hot-rolling steel mills; hot rollers in manufacturing of carton (drying ovens); huge electric motors. Biodegradation of grease is from 30% to 75%.

Agrinol Polynol HDS 460 recommended for lubrication of low- and middle-speed industrial bearings, working at high temperature and high loads in chemical, paper industry, casting and rolling mills, recommended for lubricating by centralized grease system: live rollers in Continuous Casting Machines; conveyer rollers in continuous furnaces; for other high temperature applications, such as:annealing furnace, drying ovens; friction bearing in pouring cranes; hot rollers in manufacturing of carton; asphalt pavers.

Index name Agrinol Polynol ЕР1

Agrinol Polynol ЕР2

Agrinol PolynolHDS 460

Compliance with classifi cations NLGIDIN 51502ISO 6743

1KP1Р-10

L-XAEEB-1

2KP2Р-10

L-XAEEB-2

1/2KHCP 1/2 R-30

L-XCFEB-1

Thickener Polyurea

Penetration at 25°С with stirring (60 double cycles), m*10-4, within 260-290 260-300 280-330

Dropping point, °С, not lower than 260 260 260

Colloid stability, % of selected oil, no more than 5 6 6

Shear strength at 50°С, Pa, not less than 140-600 1,0-4,0 150

Evaporation, %, not more than 3 3 2

Water resistance, grade, not less than 1c 1c 1c

Stability against oxidation, mg KOH/g, not more than 1 1 0,5

Lubricating properties at the 4-ball friction machine:• Welding load, N, not less than• Critical load, not less than• Scuff index, not more than• Wear out rate at 196N, mm, no more than

328310984400,4

328310984400,4

32831235

-0,38


96

Grea

se

Indu

stria

l lub

rica

nts

Bentol-1 M intended for the lubrication of plain and rolling bearings operating at low speed and high temperature or under cyclical temperature changes from room temperature to high.

Particularly suited for the lubrication of plain bearings of mechanisms, operating at long relubrication intervals, low speeds or exposed shock loading.

Operating temperature range: from minus 10оС up to 170о С (in short-term up to 180о С).

Index name BENTOL-1 M

Compliance with classifi cations NLGIDIN 51502ISO 6743

1KF1Р-0

L-XAFHB-1

Appearance Homogeneous ointment gray-black color, green tint

allowed

Kinematic viscosity of base oil at 40°С, mm2 / s 400-460

Penetration at 25°С with stirring (60 double cycles), m*10-4, within 310-340

Dropping point, °С, not lower than 250

Colloid stability, % of selected oil, no more than 10

Evaporation at 120 ° C, 1h.,%, not more than 2

Tensile shear strength at 50 °C, Pa, not less than 1,0

Lubricating properties at the 4-ball friction machine:• welding load, (Rs), N(kGs), not less• Deterioration rate at 196 N, mm, no more than

19600,5


97

Grea

se

Indu

stria

l lub

rica

nts

TS U 23.2-30802090-084:2008

Lubricants for rolling mills Sliding GR are designed for the lubrication of roller bearings of rolling mills, heavy duty rollers and ball bearings of nodes of industrial equipment.

Semi-fluid greases Sliding GR 00 and Sliding GR 0 are intended for use in centralized continuous lubrication systems.

Index name Sliding GR 00 Sliding GR 0


00KP0OР-20

0KP0Р-20


Thickener Li complex

Operating temperature range, min…max, °С –20 … +170 –20 … +170


Penetration at 25°С, mm·10 – 1 370 – 430 330 – 380

Shear strength at 50°С, Pa, not less than – >50


Evaporation at 120°С within 1 hour, %, not more than 3

Water resistance, class, not less than: – 1b

Effective viscosity at minus 20°С and with average gradient of the strain rate 10 s-1, Pa·s, not more than 1500 1600


• Welding load • Critical load • Scuff index • Deterioration rate (196 N), mm, not more than

32839804400,45


98

Grea

se

Indu

stria

l lub

rica

nts

TS U 23.2-30802090-084:2008

Lubricants for rolling mills Sliding GR are designed for the lubrication of roller bearings of rolling mills, heavy duty rollers and ball bearings of nodes of industrial equipment.

Sliding GR1 — for centralized systems of continuous lubrication. Sliding GR2 is used as mortgage grease.

Index name Sliding GR 1 Sliding GR 2


1KP1R-20

2KP2R-30



Operating temperature range, min…max, °С - 20 (-30) … +150 (+180)


Penetration at 25°С, mm·10−1 290–340 260–290

Shear strength at 50°С, Pa, not less than 100–420 140–640



Water resistance, class, not less than 1b

Effective viscosity at minus 20°С and with average gradient of the strain rate 10 s-1, Pa·s, not more than

1600 2000

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than:• Welding load• Critical load• Scuff index• Deterioration rate (196 Н), mm, not more than

32839804400,40


99

Grea

se

Indu

stria

l lub

rica

nts

Sliding EP2 SHC 220 - grease of wide application for operation under high pressure, which is recommended for use in heavy vehicles and industrial equipment.

Recommended operating temperature range for the Sliding EP2 SHC 220 from -45 ° C up to 170 ° C.

Index name Sliding EP 2 SHC 220


2GPHC 2K-30

Appearance Smooth, elastic ointment of red color


Operating temperature range, min…max, °С - 45 … 190 (220)

Appearance Smooth, elastic ointment of red color


Penetration at 25°С, mm·10−1 265–295

Water resistance, class, not less than 1A

Tensile strength at 50 ° C, Pa 580

Tribological characteristics on 4 balls machineat (20±5) °С, N, not less than• Welding load• Critical load• Scuff index• Deterioration rate (196 Н), mm, not more than

24509804400,5


100

Grea

se

Indu

stria

l lub

rica

nts

TS U 23.2-30802090-032:2006

Agrinol Termostan is a heat-resistant lubricant for heavy-loaded friction units, that is used as a greasing material for frictionless bearings of average and low speed and other friction units exploited at elevated temperature and loading rolling mill rolls, founding equipment, calcinators and thermal furnaces etc. It also can be used in a short-term period at the temperature not higher than 280 °С if the unit is hermetic.

The lubricant should be feeded into friction units manually by the mortgage method or by greasing of attrition faces.

Index name Agrniol Termostan


2KF2U-20

Appearance Homogeneous smooth ointment of black color


Operating temperature range, min…max, °С -20..+230 (+280)


Penetration at 25°С, mm·10−1 250-300

Shear strength at 50°С, Pa, not less than 300


Water resistance, class, not less than 1b

Penetration change, mm·10-1 -

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 1500 (0ºC)

Tribological characteristics on 4 balls machine at (20±5) °С,N, not less than• Welding load• Critical load• Scuff index• Deterioration rate (196 Н), mm, not more than

61749807500,7


101

Grea

se

Indu

stria

l lub

rica

nts

TS U 30802090.002:2000

Agrinol IP-1l (summer) and Agrinol IP-1z (winter) are antifriction water-resistant greases for centralized lubrication systems of rolling mills, blast furnaces and other large-sized equipment of metallurgical enterprises.

These greases are intended for lubricating of friction units of industrial equipment functioning at the average and heavy losses.

Index name Agrinol İP-1l Agrinol İP-1z


1/2K 1/2 C-0

0/1K 0/1 D-10

Appearance Homogeneous ointment from light-yellow to dark-brown color

Thickener Ca

Operating temperature range, min…max, °С +10...+80 -10..+80



Shear strength, Pa, not less than: • At 20°С • At 50°С

-Not less than 130

Not less than 130-


Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 250 (00C) 200 (00C)


102

Grea

se

Indu

stria

l lub

rica

nts

TS U 23.2-30802090-087:2008

Agrinol Uniol-2M grease are used for greasing of rolling mills, blast furnaces and other large equipment of metallurgical enterprises. Agrinol Uniol-2M-1 grease is used for greasing of embedded parts, and lubricant grease Agrinol Uniol-2M-2 — for centralized lubrication systems.

TS U 23.2-30802090-045:2005

Grease Agrinol ProkatOl is intended for lubrication of mechanisms operating at high specific loads: friction units of industrial, metallurgical equipment, tunnel furnaces, hot conveyors, mining equipment, of automotive, agricultural machinery, municipal electric, ceramic production.

Index name Agrinol Uniol-2M-1

Agrinol Uniol-2M-2

Agrinol ProkatOl

ЕР 2


2KP2P-20

0/1KP0/1P-30

1/2KP1/2Р-10

Appearance Homogeneous grease from light-yellow to dark-brown

color

Thickener Li complex Li complex


-20..+150 (+170)

-10 … 150 (+170)



Shear strength, Pa, not less than: • At 20°С • At 50°С

-Not less than

200

-100-600


Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 160 (00C) 110 (00C) 220

Tribological characteristics on 4 balls machineat (20±5) °С, N, not less than• Welding load• Critical load• Scuff index

2323980392

49001381650


103

Grea

se

Indu

stria

l lub

rica

nts

TS U 23.2-36451680-127:2010

Multi-purpose water-resistant antifrictional greases of LubriLiCa WR series are designed for lubrication of various medium-loaded friction units of industrial equipment (rolling and sliding bearings, gears of industrial machinery and other similar systems), mechanisms of transport vehicles and agricultural machines, which operate under conditions of high humidity in the temperature range from minus 30 °С up to 120 °С.

Index nameLubriLiCa

WR 1 WR 2 WR 3


1K1K-30

2K2K-30

3K3K-30

Appearance Homogeneous smooth ointment from light- to dark brown color

Thickener Li-Ca

Operating temperature range, min…max, °С -30..+110 -30..+110 -30..+120


Penetration at 25°С, mm·10−1305-345 260-300 215-255

• Mechanical impurities not dissolved in HCl• Water• Free alkalis in NaOH equivalent, mgКОН / g

0,025Traces0,15


Corrosion tests at 100°С, 3 hours• Copper М0k, М1k, М0b or М1• Steel mk. 45

PassPass

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than• Welding load Not specifi ed

Industrial GreasesREFERENCE BOOK

104

Grea

se

Indu

stria

l Gre

ases

TS U 23.2-36451680-127:2010

Multi-purpose water-resistant antifrictional greases of LubriLiCa ЕР series are designed for lubrication of various friction units of industrial equipment (rolling and sliding bearings, gears of industrial machinery and other similar systems), mechanisms of transport vehicles and agricultural machines, which operate under conditions of high humidity in the temperature range from minus 30 °С up to 120 °С.

Index nameLubriLiCa

EP 1 EP 2 EP 3


1KP1K-30

2KP2K-30

3KP3K-30


Thickener Li-Ca




• Mechanical impurities not dissolved in HCl• Water• Free alkalis in NaOH equivalent, mgКОН / g

0,025Traces0,15


Corrosion tests at 100°С, 3 hours• Copper М0k, М1k, М0b or М1• Steel mk. 45

PassPass

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than• Welding load 2607


105

Grea

se

Indu

stria

l Gre

ases

Metal-plating lubricants

TS U 23.2-30802090-081:2007

Plating GR is a metal plating plastic greace with attrition restorative effect. It is used for lubrication of heavy-loaded units and machines of metallurgical, mining and machine-building equipment.

Index name Plating GR


2 / 3K 2 / 3 N-30

Appearance

Homogeneous ointment, with a smooth structure from light

green to dark green-brown color.


Operating temperature range, min…max, °С –30 … +150


Penetration at 25°С, mm·10−1 220 – 280

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 800 (0°С)

Shear strength at 80°С, Pa, not less than 2,0


Evaporation at 100°С, %, not more than 4

Water resistance, class 1а; 1b

Tribological characteristics on 4 balls machine at (20±5) °С,N, not less than:

• Critical load • Scuff index

784320


106

Grea

se

Indu

stria

l Gre

ases

Industrial lubricants for rolling mills

TS U 23.2-30802090-086:2008

Rolling GR are industrial greases for rolling mills designed for centralized lubrication systems, blast furnaces, rolling and sliding bearings, hinges, screw and chain drives, low-speed reducers, friction units of transport machinery, hand tools and agricultural equipment.

Rolling GR S — summer grease, Rolling GR W — winter grease.Rolling GR SW — for multigrade application.

Index name Rolling GR S Rolling GR W Rolling GR SW


2K2E-0

0/1K0/1E-10

2/3K2/3E-20


Thickener Ca

Operating temperature range, min…max, °С +10..+80 -10..+80 -20..+80



Shear strength at 50°С, Pa, not less than 130 100 150

Colloid stability, % of secreted oil, not more than 10 12 11

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 250 200 330

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than:• Welding load• Critical load• Scuff index• Deterioration rate (196 Н), mm, not more

than

19609804000,6

REFERENCE BOOK

107

Grea

se

Rai

lway

Gre

ases

Railway Greases

GOST 19791-74

LZ-CNII grease is intended for roller bearings of railroad wagons axle-boxes.

TS U 24.6-30802090-024-2004

Agrinol MZT is a antifrictional water-resistant plastic grease, intended for lubrication of wheelset roller bearings of wheelpairs of railway rolling stocks. Grease can be used for lubrication of roller bearings of industrial and electric machines, conveyors and diverse mechanisms of industrial (e.g. rolling mills, machines), agricultural, constructing equipment etc. by the mortgage method.

Index name LZ-CNİİ Agrinol MZT


3/4KP 3/4 G-60

2/3KP 2/3 K-30

Appearance Homogeneous smooth ointment from light yellow

to dark yellow.

Homogeneous ointment from light yellow to

dark brown color

Thickener Ca-Na Li complex

Operating temperature range, min…max, °С -60...+100 -30...+130 (+150)



Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa·s, not more than 420 (0ºC) 2000 (-30ºC)

Shear strength, Pa, within:• 20ºC• 50ºC

-220

440196



---

3087980480

Railway GreasesREFERENCE BOOK

108

Grea

se

Rai

lway

Gre

ases

TS U 23.2-30802090-006-2003

Agrinol ZhRO grease is intended for usage in friction bearings of locomotives, diesel trains, rolling stocks of rail wagons.

TS U 23.2-36451680-162:2011

Agrinol Buksol grease is designed for use in friction bearings of locomotives, passenger and freight wagons, motor wagon rolling stocks, including those that operate in a speed up to 200km/h. Service life of grease for wagons amounts to 5 years or 450 000 kilometers by run.

Operating temperature range for Agrinol Buksol grease ranges from minus 60°С to 60°С, also grease is allowed for use at the temperatures up to 120°C (in friction units).

Index name Agrinol ZhRO Agrinol Buksol

Compliance with classifi cations NLGIDIN 51502 3/4 KP 3/4 H-50 2/3 KP 2/3 C-60

Appearance Homogenous smooth ointment from light-yellow to brown color.

Homogenous smooth ointment from light-yellow

to dark-brown color.

Thickener Li Li

Operating temperature range, min…max, °С -50...+120 (+130) -60...+60 (+120)



Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa·s, not more than 2000 1300

Evaporation at 100°С for 1 hour, %, not more than 2,5 2,5


Tribological characteristics on 4 balls machine at (20±5) °С:• Critical load, N, not less than• Diameter of the wear spot (196Н), mm, Н, not

more than

--

7840,5


109

Grea

se

Rai

lway

Gre

ases

TS U 24.6-30802090-058:2006

Agrinol ZhT-72 is used for lubrication of breaking devices of railway rolling stocks (locomotive brakess during friction of rubber on metal) and similar equipment in other industries, transport, argiculture.

TS U 24.6-30802090-059:2007

Agrinol ZhT-79L grease is used in brake systems of railway rolling stocks for lubrication of rubber and rubber-tissue sealing parts of break systems and for lubrication of friction surfaces: “metal - metal” and “metal - rubber”.

This product also can be used in electrical equipment friction surfaces of rolling stock: in bearing devices, hinges and all relays, wipers, pressure regulators, in the cylinders and sealing cuffs of rubber pistons of pneumatic drives of locomotives and wagons, except the cases of using leather wrist pistons.

TS U 23.2-30802090-100:2009

Agrinol ZhTKZ-65 grease is designed for lubrication of breaking equipment and mechanisms of locomotive, diesel-trains, motor-wagon rolling stocks, working with small shear. The main consumers of grease are: railway, subway organizations, enterprises and tram services.

Index name Agrinol ZhT-72

Agrinol ZhT-79L

Agrinol ZhTКZ-65


-KSIK-60

2KSI 2 K-60

2/3OG 2/3 G-60

Thickener Ca complex Li Li


-60..+120 (+150) -60..+110

Dropping point, °С, not less than - - 120

Penetration at 25°С, mm·10−1 - 240-290 230-300

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 800 (-55ºC) 800 (-55ºC) 1500 (-50ºC)

Shear strength, Pa, within:, 50ºC 50 250 -



110

Grea

se

Rai

lway

Gre

ases

TS U 23.2-30802090-055:2006

Greases Agrinol Relsol M and Agrinol Relsol GS are used for greasing of “wheel-rail” friction parts of railway transport. Greases are fed into the zone of wheel pair flanges by the lubricating device with periodic lubrication (grease Agrinol Relsol М must be fed under the pressure).

TS U 23.2-30802090-075:2007

The metal plating semi-fluid grease Agrinol Puma-M is used for lubricating of heavy-loaded toothed gears in reducers of locomotive engines as well as for increasing durability at the contact of wheel pair combs with rails. The lubricant is placed on wheel combs or cheeks of rails with the help of movable greasing mechanisms. If the lubricant is placed into friction units, mortgage method is applied. Agrinol Puma Ml — is summer grease, Agrinol Puma Mz is winter grease.

Index name Agrinol Relsol M

Agrinol Relsol GS

Agrinol Puma-Мl

Agrinol Puma-Мz


00GP00C-30

000GP000C-30

1/2G ½ G-40

0/00G 0/00 E-40

Thickener Ca Li

Operating temperature range, min…max, °С -30..+50 -40..+50 -40..+110 -45..+80

Dropping point, °С, not less than 70 - 140 Not specifi ed

Penetration at 25°С with stirring (60 double strokes), 440-445 445-495 280-350 350-440

Colloid stability, % of secreted oil, not more than - 35 Not

specifi ed


• Welding load • Critical load • Deterioration rate (196 Н), mm, not

more than

1260560

-

--

0,7

REFERENCE BOOK

111

Grea

se

Hea

t-re

sist

ant g

reas

es

Heat-resistant greases

TS U 24.6-32365441-170:2011

Agrinol Termol greases are used in roller bearings and other parts and mechanisms, which are amenable to high temperatures (for example: circulation fans of BN gas furnaces, conveyor mechanisms and tunnel kilns).

Agrinol Termol-1 is a synthetic grease with special additives, used in sed in the operating temperature range from –40 °C to +400 °C.

Agrinol Termol-2 is a mineral based grease used in the temperature range from –40 °C to +300 °C.

Agrinol Termol greases are clean, non-toxic lubricants.

Index name Agrinol Termol-1 Agrinol Termol-2


1/2K HC PF 1/2 U-40

1/2KP1/2U-40

Appearance homogeneous smooth black

ointment

Homogeneous ointment from

yellow to brown color

Thickener Inorganic

Operating temperature range, min…max, °С -40ºC..+400ºC -40ºC..+300ºC

Penetration at 25°С with stirring (60 double strokes), m 10 – 4, within 265-310 265-310

Colloid stability, % of separated secreted oil, not more than 12 12

Evaporation at 150ºС within 1 hour, %, not more than 2,0 2,0

Corrosive effect on metals (steel mk. 45 according to GOST 1050) Pass Pass

Mass fraction of water, %, not more than 0,2 0,2

Heat-resistant greasesREFERENCE BOOK

112

Grea

se

Hea

t-re

sist

ant g

reas

es

TS U 24.6-36451680-148:2010

Molyroll GR1 grease is designed for lubrication of roller bearings of industrial equipment, which operates at high loads (roller bearings of thrust chains, conveyors, transporters, cameras of bonderization, friction units of dispenser chains of iron castings).

Molyroll GR2 grease is used for lubrication of joints of universal spindles in centralized lubrication systems of rolling mills.

Index name MOLYROLL GR1 MOLYROLL GR1


2KF2P-15

0KF0P-15

Appearance Homogeneous smooth ointment of black color

Thickener Inorganic

Operating temperature range, min…max, °С -15ºC..+160ºC


Shear strength, Pa, within: 40 30

Colloid stability, %, not more than 8,0 10,0

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 150 (25ºC) 100 (25ºC)

Evaporation at 150°С within 1 hour, %, not more than 5,0

Thermal stability at 150°С within 1 hour Pass


27641580790


113

Grea

se

Hea

t-re

sist

ant g

reas

es

TS U 23.2-30802090-007:2004

Grease Aerol-А is used for the lubrication of roller bearings of industrial equipment, operating under the heavy loads (roller bearings of thrust chains, conveyors, transporters, bonderization cameras, friction units of dispenser chains of iron castings).

Grease Aerol-1А is intended for lubrication of joints of universal spindles in centralized lubrication systems of rolling mills.

Index name Aerol-A Aerol-1A


2KF2P-15

0KF0P-15

Appearance Homogeneous ointment black color

Thickener Inorganic

Operating temperature range, min…max, °С -15ºC..+160ºC

Dropping point, °С, not less than 250 -


Shear strength, Pa, within:, 50C 30 3

Colloid stability, %, not more than 8,0 10,0

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 150 (25ºC) 100 (25ºC)


25101580790


114

Grea

se

Hea

t-re

sist

ant g

reas

es

GOST 9433-80ММ

Plastic grease CIATIM-221 is designed for lubrication of roller bearings of electric machines, control systems and devices with rotation speed up to 10,000 min-1and the associated surfaces of “metal-metal” and “metal-rubber” types, working in a vacuum at the residual pressure of 666.5 Pa.

TS U 23.2-30802090-093:2008

Agrinol Grafitol grease is designed for lubrication of high-temperature friction and sliding units, such as: bearings, hot fans, hinges, kiln locks and other industrial machinery.

Contains graphite.

Index name CIATIM-221 Agrinol Grafi tol


1/2Ksi 1/2 N-60

2KF2R-25

Appearance Homogeneous smooth ointment

from light yellow to light brown color

Homogeneous soft ointment of

black color without extraneous inclusions

Thickener Ca complex Inorganic

Operating temperature range, min…max, °С -60ºC..+150ºC -25ºC..+180ºC



Shear strength, Pa, within:, 120 (50ºC) 30 (20ºC)


Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 800 (-50ºC) 300 (0ºC)


115

Grea

se

Hea

t-re

sist

ant g

reas

es

GOST 19774–74

VNII NP-207 grease is used in roller bearings of electric machines and starter-generators with rotation speed of 10,000 min−1.

Product is efficient at residual pressure of 666.5 Pa.

TS U 24.6-30802090-104:2008

Heat-resistant synthetic lubricant Agrinol VNII NP-210 is used for lubrication of heavily loaded slow moving bearings and bearings with oscillatory motion of the friction surfaces at small angles of swing.

Product is efficient at residual pressure of 666.5 Pa.

TS U 24.6-30802090-088:2008

Grease Agrinol VNII NP-219 is used in ballscrews, bearings of electric motors and starter-generators with high loads and speed up to 9000 min−1 .

Index name VNİİ NP -207 Agrinol VNİİ NP -210

Agrinol VNİİ NP -219


3KSi 3S-60

1KSi F 1 U-20

0/1KSi F 0/1 R-50

Appearance Homogeneous smooth

ointment from light yellow

to dark-brown color

Homogeneous soft ointment of black color with a blue

tint

Homogeneous soft ointment from dark gray to black color.

Thickener Ca complex - Ca complex

Operating temperature range, min…max, °С -60ºC..+200ºC -20ºC..+350ºC -50ºC..+180ºC (+200)

Penetration at 25°С, mm·10−1 Not specifi ed Not specifi ed 300-380

Shear strength, Pa, within:, 80ºC 68,6 Not specifi ed 70,00

Colloid stability, %, not more than 6,0 12 7,0

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than 1400 (-30ºC) 750 (-10ºC) 1400 (-30ºC)

REFERENCE BOOK

116

Grea

se

Che

mic

ally

resi

stan

t lub

rica

nts

Chemically resistant lubricants

GOST 8551–74

CIATIM-205 is a plastic lubricant intended for capsulation and prevention of caking of immobile screw joints and seals contacting with aggressive media (concentrated non-organic acids, alkalis, amines, alcohol, hydrazines) and working within the temperature range from minus 60 °С to +50 °С. The minimal temperature of the lubricant’s usage for movable screw joints is minus 20 °С.

GOST 14296–78

VNII NP-279 grease is intended for greasing rolling and plain bearings, threaded joints, connectors, valves, etc., operating in contact with aggressive media at temperatures ranges from minus 50 °C up to +50 °C and air at temperatures ranges from minus 50 °C up to +150 °С.

Index name CIATIM-205 VNİİ NP -279


5K5C-60

1K HC 1 N-50

Appearance Homogeneous oily ointment from white to light cream color, small granularity is

allowed.

Bright homogeneous

transparent ointment of a

smooth structure

Thickener Organic Inorganic

Operating temperature range, min…max, °С -60..+ 50ºC -50..+50ºC (+150)


Penetration at 25°С, mm·10−1 165 -

Shear strength, Pa, within:, - 100

Colloid stability, %, not more than 4 5,2

Effective viscosity with average gradient of the strain rate 10 s−1, Pa·s, not more than - 2300 (-30ºC)

Chemically resistant lubricantsREFERENCE BOOK

117

Grea

se

Che

mic

ally

resi

stan

t lub

rica

nts

TS U 24.6-30802090-068:2007

VNII NP-282 A and VNII NP-282M A are designed for designed for sealing and lubrication of the friction surfaces of various units of equipment operating at different loads in contact with corrosive environments and gaseous oxygen. Greases are allowed to use at temperatures up to minus 60°C in powerful mechanisms, valves and oxygen breathing equipment.

Greases have an increased resistance to oxygen and aggressive environments (acids, amines, hydrazine), and lower resistance to prolonged contact with nitric acid and hydrogen peroxide.

Index name VNİİ NP -282 A VNİİ NP -282M A


3KFK 3 N-45

3KFK 3 N-45

Appearance Homogeneous ointment with smooth structure from white to light gray in

color

Thickener Inorganic

Operating temperature range, min…max, °С -45 (-60)..+ 150ºC

Penetration at 25°С, mm·10−1 Not specifi ed

Shear strength, Pa, within:, 50ºC 200-700 Not more than 200


Effective viscosity, Pa·s, not more than• At (50°С) (average gradient of the strain rate 1000 s-1),• At (–20°С) (average gradient of the strain rate 10 s-1)• At (–30°С) (average gradient of the strain rate 10 s-1)

Not less than 1,6-

2000

Not more than 1,0

1200-


REFERENCE BOOK

118

Grea

se

Dril

ling

lubr

ican

ts

Drilling lubricants

TS U 23.2-30802090-036:2005

Drilling grease Agrinol Dolotol AU is used in drilling rigs for lubrication of friction units of chisels with hermetic sliding supports and for conserving chisels during the storage.

TS U 23.2-30802090-116:2011

Drilling grease Agrinol Dolotol N is used for greasing and encapsulation of friction units of rollercone drill bits with unpressurised support of rolling and sliding and for conservation of drill bits during storage. Contains graphite and molybdenum disulfide. Grease does not contain chlorine compounds.

Grease is sufficient in different climatic zones and temperatures from minus 20 °С up to +150 °С.

Index name Agrinol Dolotol АU Agrinol Dolotol N


0/1KPF 0/1 T-30

2/3KPF 2/3 N-20

Appearance Homogeneous smooth ointment

black color

Homogeneous ointment black

color

Thickener Ca complex Li

Operating temperature range, min…max, °С -30..+ 220ºC -20..+150


Effective viscosity at 0°С with average gradient of the strain rate 10 s−1, Pa·s, not more than 800 1000

Shear strength, Pa, within: 100 (50ºC) 200 (80ºC)


Water resistance, class, not less than 1b 1b


82321039735

7840872735

REFERENCE BOOK

119

Grea

se

Low

-tem

pera

ture

lubr

ican

ts

Low-temperature lubricants

GOST 11110–75

Ciatim-202 - plastic frost-resisting lubricant is used for greasing of frictionless bearings (gyroscopic devices of bearing rotor and other high-speed instrument bearings) working at the temperature range from minus 50°С up to 120°С.

GOST 8773–73

Ciatim-203 - plastic anti-friction grease for lubrication of mechanisms operating at high specific loads.

Grease is designed to lubricate gears, worm gear reducers, sliding bearings and roller bearings, various actuators, screw pairs, gearboxes, friction units of cars.

Index name CİATİM-202 CİATİM-203


2K2K-50

2KP2E-50

Appearance Homogeneous ointment without lumps from light yellow to light

brown color

Homogeneous ointment dark green or brown

Thickener Li

Operating temperature range, min…max, °С -50..+ 120ºC -50..+90ºC



Shear strength, Pa, within:, 50ºC 150 250


Effective viscosity, Pa·s• At (50°С) (average gradient of the strain rate 1000

s-1), not less than• At (–30°С) (average gradient of the strain rate 10

s-1), not more than

-1300

11000

REFERENCE BOOK

120

Grea

se

Rop

e gr

ease

s

Rope greases

TS U 23.2-30802090-110:2009

PROTECTING TG grease is designed for protection of steel ropes against wear and corrosion (including ropes in underground and surface mining equipment) in the process of manufacture and during transportation and operation.

Index name PROTECTING TG

Appearance

Homogeneous ointment from brown to black color without foreign

impurities

Thickener Solid hydrocarbons

Operating temperature range, min…max, °С –35 … +50

Kinematic viscosity at 100°С, mm²/s, not less than 16,0

Temperature, °С: • Open cup fl ash point, °С, not less than • Dropping point

15062-72

Low temperature properties at −35°С Pass

Pouring time, s, not more than 6

Thermal stability • Preservation of structural homogeneity Pass

Adhesive ability (discharge in centrifuge with separation factor Кр = 6270), %, not more than 50

Protective ability of steel mk 10 in electrolyte solution, days, not less than 5

Rope greasesREFERENCE BOOK

121

Grea

se

Rop

e gr

ease

s

TS U 23.2-30802090-115:2009

Agrinol Rope 39U is designed for the lubrication of wire ropes (against corrosion and premature wearout during operation), including mining and drilling ropes, working in temperatures ranging from minus 25 °C to +50 °C.

Index name Agrinol Rope 39U

Appearance Homogeneous ointment from brown to black


Operating temperature range, min…max, °С -35..+50

Conventional viscosity at 100 °С, conditional degrees, not less than 4,5

Dropping point, °С, within 65-78

Low-temperature properties at minus 25°С Pass


Thermal stability• Appearance• Evaporation, %, not more than

Pass0,2

Mass fraction:• Water soluble acids and alkalis, %, not more than• Water, %, not more than• Abrasive mechanical impurities, %, not more than

NoneNoneNone

Rope greasesREFERENCE BOOK

122

Grea

se

Rop

e gr

ease

s

TS U 23.2-30802090-053:2006

Agrinol Torsiol-35B/1 is used as a greasing material in production of steel ropes.

Agrinol Torsiol-35B/2 is used for conservation of steel ropes and their protection from inclement weather.

Agrinol Torsiol-35E is intended for lubrication of steel ropes (including ropes of surface and underground lift systems of mines) under operating conditions. Product can be used for greasing in process of manufacturing of steel ropes, used to operate under extremely low temperatures: from minus 35°С up to +50°С.

Index name Agrinol Torsiol-35B/1

Agrinol Torsiol-35B/2

Agrinol Torsiol-35E

Appearance Movable mass from brown to dark brown color


Operating temperature range, min…max, °С -35..+50

Kinematic viscosity, mm²/с• At 50°С• At 100°С

-Not less than 8,5

--

10-20-

Temperature, °С:• Open cup fl ash point, °С, not

less than• Dropping point

180

65-80

180

70-80

180

-

Low-temperature properties at minus 35°С Pass -

Thermal stability• Preservation of structural

homogeneity• Evaporation, %, not more than

Pass

0,2

Pass

0,7

-

-

Adhesive ability, %, not more than 60 30 -

Protective ability of steel mk 10 in electrolyte solution, days, not less than

- 5 -

REFERENCE BOOK

123

Grea

se

Inst

rum

enta

l lub

rica

nts

Instrumental lubricants

GOST 6267–74

CİATİM-201 - lithium anti-friction frost-resisting and refractory lubricant is used for greasing of easy-loaded rolling and sliding friction units. The lubricant is intended for greasing friction units of aircrafts, radio engineering equipment, electromechanical and other devices and precision mechanisms, main units of cars and other ground machinery exploited in northern regions and working with a small shearing force under the easy loads.

GOST 18179–72

OKB-122-7 grease is used in ball bearings and other friction units working in the temperature range from minus 60 °C to 120 °C.

Index name CİATİM-201 OKB 122-7


2K2E-60

2KSi2K-60

Appearance Homogeneous ointment without lumps from light yellow to light brown color

Thickener Li



Shear strength at 50°С, Pa, not less than 250-500 Not less than150


Effective viscosity, Pa·s* at 50°С (average gradient of the strain rate 10 s-1)* -at 50°С (average gradient of the strain rate 10 s-1)

-

1100

1,2

-

REFERENCE BOOK

124

Grea

se

Mar

ine

lubr

ican

ts

Marine lubricants

GOST 2712-75

Water-resistant conservation greases of АМS series are used for lubrication of various mechanisms (of ships, submarines, hydroplanes), which are working in water (including the sea water) in the temperature range from -15°C to 70°C.

Index name AMS-1 AMS-3

Compliance with classifi cations NLGIDIN 51502 1 K1E-15 3/4 K3E-15

Appearance Homogenous smooth ointment from dark color without lumps

Thickener Al Al

Operating temperature range, min…max, °С -15..+70 -15...+70


Effective viscosity at 0°С with average gradient of the strain rate 10 s-1, Pa·s, not more than 1000 2000


Testing of protective properties for 24 hours Pass

Water soluble acids and alkalis None

Water content None

Mechanical impurities None

REFERENCE BOOK

125

Grea

se

Con

srev

atio

n (p

rote

ctiv

e) lu

bric

ants

Consrevation (protective) lubricants

TS U 23.2-30802090-063:2006

Agrinol ZES grease is used for protection of ground wires and armatures of high-voltage power lines from corrosion. Product also can be used in various machines, mechanisms and other metal products made of ferrous and non-ferrous metals in various conditions (such as: operating, transportation and storage in open areas).

The lubricant can be used in all climatic zones, including the dry and humid tropics, sea fog, contact with fresh and sea water, as well as under direct impact of sunlight beams.

GOST 19537–83

Cannon Grease is used for corrosion protection of metal products surfaces at the temperature ranges from minus 50°С up to +50°С in storage and conservation conditions.

Index name Agrinol ZES Cannon Lubricant


1/2OG 1/2 G-50

5/6M 5/6 C-50

Appearance Ointment without lumps of dark color

Homogeneous ointment, from yellow to brown

color

Thickener AlHydrocarbonic Hydrocarbonic

Operating temperature range, min…max, °С -50..+100 -50...+50


Sliding temperature, °С, not less than - 50

Penetration at 25°С, mm·10−1 270-335 90-150 (without stirring)

Determination of tendency to sliding Pass -

Corrosive effect on metals Pass Pass (copper)

REFERENCE BOOK

126

Grea

se

Sea

ling

lubr

ican

ts

Sealing lubricants

TS U 24.6-30802090-034:2005

Agrinol Kranol is a sealing grease for gas valves used for lubrication of shutoff valves of gas appliances, shutoff valves of gas pipelines, gas distribution and compressor stations at the pressure of 7.5 MPa

GOST 19538–74

ZZK-3u is used for cracks in hatches, lids, doors and other places of machines, as well as in conservation of machine tools and other equipment, concealed with housings, sheaths, and shields.

GOST 16862–71

Antifrictional conservation and sealing lubricant VNII NP-263 is intended for sealing of threaded connections, screwing out threads for operation in extreme temperature conditions.

Index name Agrinol Kranol ZZK-3u VNİİ NP-263

Compliance with classifi cations DIN 51502 - - MP G-50

Thickener Ca Al Inorganic

Operating temperature range, min…max, °С 0..+50 -60..+80 -50...+100

Dropping point, °С, not less than 60 115 -

Colloid stability, %, not more than 2,0 - 10

Penetration at 25°С, mm·10−1, without stirring 35-70 40-80 Not specifi ed

Shear strength at 50°С, Pa, not less than - - 100

Tendency to sliding at 100 °C- Pass -


Sealing lubricantsREFERENCE BOOK

127

Grea

se

Sea

ling

lubr

ican

ts

TS U 23.2-30802090-121:2009

Grease Agrinol LZ-162u is intended for sealing of the valves (direct-flow valves, plug valves), flowing oil and gas wells, including deep and ultra-deep pressure on downhole of up to 100 MPa.

TS U 24.6-30802090-123:2009

Grease Agrinol Armatol-238 is used for the sealing of the locking devices of mining oil industry equipment from oil, gas and gas condensate fields, which contain hydrogen sulfide and carbon dioxide to 25 % by volume and operated in all climatic zones (including areas with cold climates), as well as for various other valves.

TS U 23.2-30802090-125:2009

Agrinol Rezbol ОМ-2 grease is intended for sealing and corrosion protection of various pipes: casing, tubing and drilling in the construction and operation of oil and gas rigs.

Index name Agrinol LZ-162u

Agrinol Armatol-238

Agrinol Rezbol OM-2


4/5MF 4/5 K-40

0/1MF 0/1 K-50

0/1MPF 0/1 S-50

Thickener Li-Zn Inorganic Li


Dropping point, °С, not less than 149 160 -

Penetration at 25°С, mm·10−1, 150-200 300-360 330-390

Effective viscosity at 0°С with average gradient of the strain rate 10 s-1, Pa·s, not more than 1500 1000 1000


Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than:• Welding load - - 6174

Water resistance, class, not less than 1b 1b -

Corrosive effect on metals Pass (steel)

REFERENCE BOOK

128

Grea

se

Red

ucer

lubr

ican

ts (s

emi-f

luid

)

Reducer lubricants (semi-fl uid)

TS U 23.2-30802090-026:2004

Transol-100А grease is designed for greasing of worm gearboxes and geared motors, working with the maximum specific loads up to 400 MPa.

Transol-200А grease is designed for lubrication of cylindrical and planetary gear reducers and gearmotors, working with the maximum specific loads up to 2000 MPa. Product is efficient for at least 10 000 hours.

GOST 16422–79

Ciatim-208 semi-fluid transmission lubricant is needed for greasing of heavily loaded gear reducers of tracked vehicles.

Index name Transol-100A Transol-200A CİATİM-208

NLGI Compliance with classifi cations DIN

51502

00 GHCF00G-40

00 GP00E-40

1 GP1H-30

Appearance Homogeneous smooth ointment from light brown to dark brown

color

Homogeneous viscous black

liquid

Thickener Li Ca



Effective viscosity at 0°С with average gradient of the strain rate 10 s-1, Pa·s, not more than

1200 1400 1800 (dynamic, at minus 30°С)

Penetration at 25°С, mm·10−1400-430 385-430 300-360 ((–15°С)

Without stirring)

Colloid stability, %, not more than, 10-35 10-30 -

Evaporation, %, not more than 1,5 (100ºC) 0,8 (100ºC) 15,0 (125ºC)

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than• Welding load• Critical load• Scuff index

1744696343

2764696392

6938872764

REFERENCE BOOK

129

Grea

se

Bra

ke-

in p

aste

s

Brake- in pastes

TS U 23.2-30802090-052:2006

Agrinol Limol А grease is designed to facilitate the assembly, running-in and lubrication of slide bearings, hinges of helical and toothed gears, heavy-duty low-speed friction units, threaded connections.

GOST 19782–74

VNII NP-225 is designed for protection of threaded connections form seizure at the temperature ranged from minus 60°С up to +250°С for aluminum anodized alloys and up to 350°С for stainless steels, as well as for low-speed heavy-duty friction units at the temperatures from minus 40°С up to +300°С.

GOST 14068–79

VNII NP-232 is designed for lubrication of splines and running threads at the temperatures up to +300°С, and for the threaded connections that are fixed during operation of the unit - up to +400°С.

Index name Agrinol LimolA VNİİ NP-225 VNİİ NP-232


1KF 1U-50

00KsiF 00 U-60

3KF 3 U-50

Thickener Inorganic Inorganic Li


Dropping point, °С, not less than 240 - -

Penetration at 25°С, mm·10−1 6,0 - 4

Corrosive effect on metals Pass Pass (3 hours, 250°С) Pass

Tribological characteristics on 4 balls machine at (20±5) °С, N, not less than• Welding load• Critical load• Scuff index

32832195755

---

---

REFERENCE BOOK

130

Grea

se

Insu

latio

n lu

bric

ants

Insulation lubricants

TS U 24.6-36451680-143:2010

Hydrophobic filler Agrinol Hydrophobinol-І is designed for filling the shell of communication cables in order to prevent the ingress of moisture into the cable.

Hydrophobic filler Agrinol Hydrophobinol-І is ready for use in the delivery condition, requires no dilution and can be warmed up for the complete filling of the cable sheath.

Index name Agrinol Hidrofobinol-I

Thickener Hydrocarbonic

Kinematic viscosity at 100 °С, mm2/s, within 20,0 – 50,0

Dropping point, °С, not less than 70-95


Density at 20°С, g/cm3, within 0,860-0,890

Shrinkage, %, within 4-6

Change in isolation mass, %, not more than 15

Volume resistivity, Om/cm3:• At 20°С, not less than• At 100°С, not less than

1*1016

1*1012

Dielectric permittivity:• At 20°С and 1kHZ frequency, not more than• At 20°С and 1mHZ frequency, not more than

2,32,3

REFERENCE BOOK

133

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

TECHNOLOGICAL COOLING LUBRICANTS

REFERENCE BOOK

134

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

Cooling lubricants, manufactured by “Agrinol” are complex, multicomponent systems, which are used in cooling process of metalworking tools and bench parts. Reduction of temperature in the working area reduces wear-out of the cutting tool, and, consequently, the quality and accuracy of the machined surface is increasing. It is also important to provide the protection against corrosion of the cutting tool, workpiece and the rolled sheet during manufacturing and storage.

Efficiency of “Agrinol” cooling lubricants application is determined by the high degree of concentrated coolant dilution and low specific consumption of the solution per workpiece unit.

The wide range of “Agrinol” cooling lubricants allows you to choose the most effective coolant for each combination: the processed material — type of processing — instrumental material — cutting mode.

REFERENCE BOOK

135

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

O

il co

olan

ts

Oil coolants

GOST 38.01445–88

MR-7, MR-7V are used as cooling lubricants for blade machining, including vending machines and benches, arbon, alloy, stainless and heat resistant steels, as well as some hard-alloys. Limitedly applicable in processing of copper and its alloys. Feeding to the cutting are is performed through irrigation or under the pressure.

TS U 24.6-30802090-056:2006

Technological greases Agrinol KЕT-1 and Agrinol KЕT-1M are used in calibrating of tubes by expanders.

Index name MR-7 MR-7B Agrinol КEТ-1 Agrinol КEТ-1M

Flash point in open crucible, °С, not less than 180 -

Kinematic viscosity at 100°С, mm2/s 23-30 -

Saponifi cation number, mgКОН/g, not less than 18 15

Acid number, mg КОН/1g, not more than 1,2 -

Color, CNT units, not more than - 2 -

Corrosive effect on metals Pass Pass

Mass fraction, %:• Mechanical impurities, not

more than• Water, not more than• Sulfur• Free organic acids, not

more than

0,04None

1,2-2,0-

-45-7

-38-7

Oil coolantsREFERENCE BOOK

136

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

O

il co

olan

ts

TS U 24.6-36451680-161:2011

TL Effort stamping grease is designed for wide range of operations: in the automotive industry during cold plate and volumetric forging of structural and alloyed steels (special deep drawing of steels, forming, calibrating, fine cutting, binding on automated presses), as well as during the rolling of threads and threading in manufacturing of metal products and pipes.

Environmentally friendly product! Product does not contain Cl and Р (Chlorine and Phosphorus) and synthetic

biologically undegradable substances.

Index name TL Effort

Kinematic viscosity at 50°С, mm2/s 90

Saponifi cation number, mgКОН/g, not less than 60

Corrosive effect on metals:* on ferrous metals (iron, steel)* on non-ferrous metals (copper)

Pass3а-4с

Mass fraction of sulfur, %, not more than 2,8

Mass fraction of water, %, not more than 0,5


Content of mechanical impurities, %, not more than 0,08

REFERENCE BOOK

137

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

Water-based cooling lubricants

TS U 24.6-30802090-139:2010

Technological grease Agrinol TEMP-3KN is used in form of (6-10) % water emulsions for oiling of carbon steels after etching prior to cold rolling.

For preparation of emulsions can be used water with hardness not more than 6 mg-eq / dm3.

TS U 23.2-30802090-105:2011

Water-based cooling lubricant Cold Roller is used in form of (2-10) % water emulsions on the stage of cold rolling of steel and oiling of steel straps before wrapping them in a roll. Has increased lubricating, antiwear, anti-corrosive properties. Resists carbon formation.

Environmentally friendly product!Does not contain CL and synthetic non-biodegradable substances!

Index name Agrinol TEMP-3KN Cold Roller

Kinematic viscosity at 50°С, mm2/s - 30

Saponifi cation number, mgКОН/g, within - 65-90

Dropping point, °С, within 35-45 -

Acid number, mg КОН/g, within, within 100-150 16-25

Mass fraction of water, %, not more than 5,0 1,0

Storage stability - Pass

10 % working emulsion 3% working emulsion

рН value, рН units, within - 8,0-9,0

Stability, % Pass Pass (for 6 hours)

Corrosive effect on metals Pass Pass

Water-based cooling lubricantsREFERENCE BOOK

138

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

GOST 5702–75

Technological lubricant SP-3 is designed for use as an aqueous emulsion in rolling of nonferrous metals and as a working fluid in hydraulic systems of technological equipment.

TS U 23.2-30802090-025:2004

TS U 23.2-30802090-022:2003

Agrinol EHP and Agrinol HP technological lubricants are intended for use in form of (2 5)%-aqueous emulsions (with hardness up to 5 mg-eq/dm3) at the stage of cold rolling steel, and in form of (5-10)%-aqueous emulsions (with hardness up to 17 mg-eq/dm3) - for oiling of the steel stripes before wrapping them in a roll with following thermal treatment.

Both products can be used in the processing of ferrous metals by pressure or cutting.

Index name SP-3 Agrinol EHP Agrinol HP

Kinematic viscosity at 50°С, mm2/s - 50 35

Alkaline number, mg КОН/g, not less than 7 -

Acid number, mg КОН/g, within 17-21 not more than 16

not more than 12

Corrosive effect on metals Pass -

Mass fraction of water, %, not more than None 1

Storage stability - Pass

Working emulsion 3 %

рН value, рН units, within - 8-9

Stability within 6 hours, %, not more than - Pass

Corrosive effect on metals - Pass


139

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

TS U 23.2-30802090-048:2006

Emulsol Agrinol OM is used in metal cutting and cold-rolling of structural steel.

Emulsol is applied in form of 5 %-water emulsion during cold-rolling of structural steel, including automotive sheets.

Product also can be applied in form of (3-5)%-water emulsion during the processing of carbon and alloy steels in grinding, turning, drilling, and other operations.

TS U 24.6-36451680-091:2010

KAS-1SM liquid is designed for preparation of (3-5)%-aqueous emulsions, which are used in the processing of ferrous metals with cutting and grinding. For the preparation of emulsions can be used water with hardness up to 17 mg-eq/dm3.

TS U 23.2-30802090-005:2003

Emulsol Agrinol ET-2U is a concentrate of oil-coolant, which is used in form of (3-10)% emulsions during the cutting and abrasive machining of cast iron, carbon and alloy steels.

Index name Agrinol OM Agrinol EТ-2U KAS-1SM

Kinematic viscosity at 50°С, mm2/s 15-50 20-50 100

Saponifi cation number, mg КОН/g, within 22-45 - -

Acid number, mg КОН/g, within - 15-23 -

Mass fraction of free organic acids, mg КОН/g of emulsifi er, within 18-25 - -

Mass fraction of water, % 3,0 3,0 -

Storage stability Pass

Working emulsion 5% 10% 2%

рН value, рН units, within 7-9 8-10 8-10

Stability, %, not more than 1,0 0,5 (4 hours) Pass (6 hours)



140

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

TS U 23.2-30802090-054:2006

TS U 23.2-30802090-051:2006

Agrinol Akvol-2 and Agrinol Akvol-2E are liquid coolants used in the processing of doped, stainless, heat-resistant alloys and steels.

Liquids are used for the preparation of (3-10)% emulsions, which are used in the processing of doped stainless, heat resistant steels and alloys on the operations of turning, drilling, milling, reaming, threading, broaching, heavy-duty grinding, as well as for processing of aluminum alloys with cutting.

Index name Agrinol Akvol-2 Agrinol Akvol-2E

Kinematic viscosity at 50°С, mm2/s 40-80 40-100

Saponifi cation number, mg КОН/g, within 20-45 20-45

Acid number, mg КОН/g, within 10 12

Mass fraction, %* Water, not more than* Sulfur,within* Chlorine, within

51,5-2,8

4-5

51,5-2,8

-

Working emulsion 7%

рН value, рН units, within 8-10

Stability, %, not more than Pass



141

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

TS U 24.6-30802090-083:2009

Synthetic hydraulic fluid RG-s is used in hydraulic systems of various industrial and mining equipment (hydraulic powered supports, hydrotravellers, conjugation linings, etc.) in form of (1,0 - 5)%-water emulsion at environmental temperatures above 10°С.

RG-1s is designed for moderate operating modes, RG-2s is designed for heavy-loaded systems.

Emulsion can be prepared in water with any hardness index (up to 20-25 mg-eq/dm3), including mine waters. It does not contain chlorine.

Index name RG-1s RG-2s

Kinematic viscosity at 50°С, mm2/s 15 20

Density at 20°С, kg/mm³, within 1000-1200 1100-1300

Concentrate stability during the storage Pass

Working emulsion 1% 0,75%

рН value, рН units, within 8,5-10,0



142

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

W

ater

-bas

ed c

oolin

g lu

bric

ants

TS U 23.2-30802090-020:2002

Agrinol RG working fluid is used in hydraulic systems of industrial equipment and is primarily intended for using in form of (3-5)%-water emulsions in hydraulic systems of minig equipment (including underground equipment), at the environmental temperatures above 10°С.

TS U 23.2-30802090-042:2005

Emulsol Agrinol EKS-5 is a concentrate, which can be used as a 10 %-aqueous emulsion in water with the hardness not more than 6 mg-eq / dm3 with addition of 0,2 % of soda ash added for greasing of metal molds during the production of concrete products. Emulsifier facilitates removal of concrete and concrete products of the metal forms by reducing the adhesion (sticking) to metal products. Product can be used in pure form.

Index name Agrinol RG Agrinol EKS-5

Kinematic viscosity at 50°С, mm2/s, not more than 100 50

Acid number, mg КОН/g, within not more than 16 8-12

Mass fraction, %, not more than* Water, not more than* Chlorine, within

50,3

Traces-

Storage stability Pass -

Working emulsion 10%

рН value, рН units, within 8-10 -

Stability, %, not more than ≤0,5 (4 hours) Pass (2 hours)

Corrosive effect on metals Pass -

REFERENCE BOOK

144

TECH

NO

LOGI

CAL

CO

OLI

NG

LUB

RICA

NTS

REFERENCE BOOK

145

AUTO

CH

EMIS

TRY

AUTO CHEMISTRY

REFERENCE BOOK

146

AUTO

CH

EMIS

TRY

One of the most important elements of engine support is coolant. Improper quality of coolant can lead to the corrosion of metal parts of the engine and solders, as well as swelling of nozzles.

Coolants of “Agrinol” production (such as TOSOL) contain anticorrosive, stabilizing, antifoaming and coloring components in their structure. Special additives provide “Agrinol” coolants win a unique set of properties that allows you to use them as long as possible with great efficiency and without losing these properties.

Coolants of “Agrinol” production provide high cooling efficiency, reliability and durability of the engine in general.

REFERENCE BOOK

147

AUTO

CH

EMIS

TRY

Coo

ling

liqui

ds

Cooling liquids

TS U 24.6-30802090-130:2009

Agrinol Tosol cooling liquids are designed for cooling of an internal combustion engines, as well as the working fluid in the other heat exchangers operating at low and moderate temperatures. Agrinol Tosol can be used both in copper and in aluminum radiators. It should be poured directly into the cooling system. Fluid is designed for operation without replacement and without addition of any additives during 60,000 km or for 2 year period.

Temperature range for:Agrinol Tosol-30 — intended for southern regions, where environmental

temperature is not lower than minus 30°С.Agrinol Tosol-40 — regions, where environmental temperature is not lower

than minus 40°С.Agrinol Тosol-65 — regions of Far North, where environmental temperature

is not lower than minus 65°С. Can also be used as a concentrate for preparation of a coolant with specified freezing point.

Index name Agrinol Tosol-30

Agrinol Tosol-40

Agrinol Tosol-65

Crystallization temperature, °С, not more than -30 -40 -65

РН level, рН units, within 7,5-11,0 7,5-11,0 7,5-11,0

Corrosive effect on metals, g / m2*24 hours, not more than:• Copper, cast iron, brass, steel• Solder• Aluminum

0,20,30,5

0,20,30,5

0,20,30,5

Rubber swelling, %, not more than 5

Alkalinity, cm3, not less than 10

Density at 20°С, kg / m3, within 1055-1125 1065-1135 1085-1145

Cooling liquids REFERENCE BOOK

148

AUTO

CH

EMIS

TRY

Coo

ling

liqui

ds

TS U 24.6-30802090-130:2009

Coolant Agrinol Tosol ТА is used in south regions with environment temperature not lower than minus 20°С.

Coolant Agrinol Tosol А-40 is used in south regions with environment temperature not lower than minus 38°С.

Fluid could be used in both copper and aluminium radiators. Fluid is intended for expluatation without change and admixture of any additives during 60000 km for 2 years. Fluid should be filled into cooling system.

Index name Agrinol Tosol TA Agrinol Tosol A-40

Crystallization temperature, °С, not more than -21 -38

Pour point, °С, not more than -23 -41

РН level, рН units, within 7,5-11,0 7,5-11,0

Corrosive effect on metals, g / m2*24 hours, not more than:• Copper, cast iron, brass, steel• Solder• Aluminum

0,10,20,1

0,10,20,1

Rubber swelling, %, not more than 5

Alkalinity, cm3, not less than 10

Density at 20°С, kg / m3, within 1055-1125 1065-1125

Foaming:• Amount of foam, cm3, not more than• Foam stability, s., not more than,

303

303

REFERENCE BOOK

149

AUTO

CH

EMIS

TRY

Win

dshi

eld

flui

ds

Windshield fl uids

TS U 24.5-36451680-158:2010

Crystal windshield fluids can be used for cleaning the glass, headlights and mirrors from ice, mud and insects; as well as a glass anti-fog. Fluids can be used in all seasons, manually or with use of the washer.

Crystal windshield fluids can be used domestically for cleaning glass, mirrors, crystal items, porcelain, pottery and ceramics (excluding food dishes).

Depending on operating conditions and the temperature of crystallization several brands of liquids are offered: Crystal-2; Crystal-5; Crystal-16; Crystal-20; Crystal-25; Crystal-32; Crystal-50

Index nameCrystal

2 5 16 20 25 32 50

Appearance at the temperature of (20 ± 5) °С

Homogenous transparent liquid without mechanical impurities

Density at 20°С, kg / m3, within

900-1000

900-1000

850-980

850-980

850-980

850-980

850-980

Crystallization temperature, °С, not more than

-2 -5 -16 -20 -25 -32 -50

РН level, рН units, within 6-9 6-9 6-9 6-9 6-9 6-9 6-9

Environmental temperature,°С Amount of preparation, dm³ Amount of distilled water,dm³

Up to minus 5°С 1 5

From minus 5°С up to minus 10°С 1 3

From minus 10°С up to minus 20°С 1 1,5

From minus 20°С up to minus 40°С 1 1

Windshield fl uidsREFERENCE BOOK

150

AUTO

CH

EMIS

TRY

Win

dshi

eld

flui

ds

Metal packingREFERENCE BOOK

151

Met

al p

acki

ng

METAL PACKING

REFERENCE BOOK

152

Met

al p

acki

ng

Metal packing

“Scientific and Industrial Enterprise (SIE) Agrinol” is a manufacturer of meta drums for oil, chemical, food products etc. Manufacturing of drums is effected on modern technological lines in accordance with health and ecological requirements High fexibility of manufacturing ensures competitive price along with high quality product. Quality management system DSTU ISO 9001 – 2001 (ISO 9001 – 2001) have been implemented, drums manufactured comply with Government Standards (GOST), Technical Specifcations and International transportation rules for dangerous goods by UN.

Production of metal packing with the logoAccording to individual order, the drum may be painted in any color or framed

in accordance with customer’s design, including costumer’s logo or trademark on the drum body that will ensure your packaging original and recognizable appearance:

PAINTING OF METAL DRUMS


153

Met

al p

acki

ng

Steel drum, tight-head type 1A1L 216,5 dm3

• The First neck — fl ler neck G2’’, Rieke, made by curling.• The second neck — Air-hole G3 / 4’’, Rieke, made by curling.• Curling — round seven-layer seam with sealing hermetic Darex 159 V.• Drum’s body is made of sheet metal, thickness 0,9 – 1,0 mm.• Edges-ridge — Two ridges that are made on the surface of the drum’s

frame with radius R = 9 mm.• The dense, strong and tight welding seam is made by contact welding

overlapped width of 4 mm• Bottom and top are made of sheet metal thickness of 1,0 mm.

Barrel with food internal cover .• Possible to produce

Steel drum, open-head type 1A2L 213 dm3

• Hoop Coupling — “Agrinol” production, made of galvanized metal.• The lock with lever, Rieke production, is supplied with a device for

sealing plastic cotter.• The removable deep-drawing top 1,0 mm thick with relief.• Drum’s body is made of sheet metal thickness 0,9 – 1,0 mm.• Edges-ridge — Two ridges that are made on the surface of the drum’s

frame with radius R = 9 mm.• The dense, strong and tight welding seam is made by contact welding

overlapped width of 4 mm.• The bottom is made of sheet metal thickness of 1,0 mm with a rigid relief.

It is connected to the seven-layer seam with sealing hermetic Darex 159V.


154

Met

al p

acki

ng

Drum CD-1A2 18 20 dm³• Thickness of upper and lower metal bottom: 0.28 mm.• Thickness of the bucket body: 0.30mm.• Capacity: 20 dm3.• Weight of the empty drum: 1.5 kg.• Body: welded• The mass limit for packaged product: 30kg.

REFERENCE BOOK

155

Corr

espo

nden

ce t

able

pro

duct

s

Correspondence table products

NAME TYPE NLGI ANALOGS

General-purpose lubricants

Agrinol SolidolZh- 0, Zh-1, Zh-2, Zh-3

Са 0,1,2,3 SHELL Ossagl V (00); TEBOIL Solid 0,2; EXXON Estan 1,2Cluber Lubrication Helveum 2; AGIP Grease CC 2,3BP Energrease C 1,2,3; SHELL Alvania RL 1,2,3

Fatty SolidolAgrinol Solidol ZhSH

Са 2 / 3

Agrinol Solidol EP-2,3 Са 2

3

TEXACO Novatex EP 2; EXXON Estan 2; SHELL Rhodina EP (LF) 2AGIP Grease CC 2,3; BP Energrease C 1,2,3

Graphite Grease Са+C 2 AGIP Grease NG; BP Energrease C-3G; SHELL Malleus STC 2

Konstalin-1Konstalin –2Agrinol 1 – 13

Na2 / 33 / 43 / 4

BP Energrease BRB N3; CASTROL Spheerol S, HSMOBIL GREASE BRB N3

Automobile lubricants

Agrinol LSC-15 Li 2 SHELL Alvania EP 2; MOBIL Mobillux 2, EP 2; ESSO Beacon EP 2

Agrinol Fiol-2УVNII NP-242 Li+Mo 2

BP Energrease L21-M / CL 2; CASTROL SPHEEROL LMMMOBIL grease SPECIAL / Mobilgrease XHP 2SHELL Retinax EPX / HDX 2 / Netia HV 2; Q8 Rembrant MolyPETROL OFISI Molibdenli gres 2; NESTE Allrex M 2 / Molygrease 2

Agrinol ShRUS-4 Li+Mo 2

BP Energrease LS-EP 2; SHELL Retinax HDX 2; 76 Megaplex XD; TEXACO Molytex EP 2; MOBILGREASE SPECIAL; Cluber Lubrication Caxtrobase MS 20; CHEVRON Moly Grease EP2; NESTE Molygrease 2; TEBOIL Universal M2; CASTROL MS / 3 Grease

Agrinol 158Agrinol 158М Li-K 1 / 2

NUCO Grease 57; SHELL Alvania RL 2; Q8 Rubens WB 2; NESTE Semilix 1,5 / Superlix EP2; ELF Epexelf 1,2; ZIC Wheel Bearing Grease 2

Agrinol ShRB-4 к-Ва 2 Cluber Lubrication Centoplex 132 BV

Multu-purpose lubricants

Agrinol Fiol 1 Li 1 BP Energrease L 1, 2; MOBIL Mobilux 1,2; SHELL Alvania RL 1,2CASTROL LM Grease; TEBOIL Multi-Purpose Grease 2

Agrinol Fiol 2 Li 2

Correspondence table productsREFERENCE BOOK

156

Corr

espo

nden

ce t

able

pro

duct

s


Agrinol Litol 24 Li 3

TEXACO Multifak Premium 3; SHELL Alvania RL / EP / Retinax EP;AGIP Grease MU 3; ESSO Beacon 3; MOBIL Mobillux 3.

Ligrease 00, 0, 1, 2, 3 Li 00,0,1,2,3

SHELL Alvania RL; MOBIL Mobillux; BP Energrease L; CASTROL LM Grease; TEBOIL Multi-Purpose Grease; TEXACO Multifak Premium; ESSO Beacon; ZIC Crown grease

Ligrease EP 00, 0, 1, 2, 3 Li+EP 00,0,1,2,3

SHELL Albida RL / EP1 / Retinax EP / LX / Alvania EP (LF) 1 / Starplex EP; MOBIL Mobillux EP; ESSO Beacon EP; ESSO Beacon; АZMOL Luvana EP / Lika EP; TEXACO Multifak EP; ZIC Crown grease EP

Railway lubricants

LZ-CNII Са-Na 3 / 4BP Energrease N 3; CASTROL Castrolease CS; MOBIL Mobilgrease BRB4; SHELL Alvania EP3 / Nerita 3

Agrinol GROAgrinol Buksol Li 3 / 4

2 / 3

SHELL Alvania RL 3; BP Energrease LS3; ESSO Beacon 3MOBIL Mobillux 3

Agrinol MZT k-Li 2 / 3 SHELL AeroShell Grease 6, 22; BP Energrease LS3; ESSO Beacon 3

Agrinol GT-72 k-Ca -SHELL AeroShell Grease 15AMOBIL Mobilgrease 24Agrinol GT-79L Li 2

Agrinol GTKZ-65 Li 2 / 3

Industrial lubricants

SKS HV1, HV1*SKS HV2, HV2*SKS 300m-1, 300m-1*SKS 300m-2, 300m-2*

Sulfonate Ca

1 / 22

1 / 22

AZMOL Sulena 1,2; TOTAL CERAN HVA 2 / FG276 Multiplex Red Grease 1,2;TEXSACO Polystar Syntetic 4602

ROLLING GR WROLLING GR S Ca 0 / 1

2SHELL Luveda EP2 / Alvania RL1,2 / Rhodina LF 2EXXON Estan 2; MOBILtemp 2; AGIP Grease CC 2,3BP Energrease C 1,2; TEXACO Novatex EP 2

Agrinol IP-1lAgrinol IP-1z Ca 1 / 2

0 / 1

LubriliCa WR 1, 2, 3 Li-Ca 1,2,3 SHELL Alvania WR; ELF EPEXELF; TOTAL Multis

2


157

Corr

espo

nden

ce t

able

pro

duct

s


LubriliCa EP 1, 2, 3 Li-Ca+EP 1,2,3 SHELL Retinax HD2; ELF MULTIPLEX EP; TOTAL

Lical EP2; TOTAL Multiplex EP2 / Multis EP2

SLIDING GR 00, 0, 1, 2 k-Li

00012

BP Energrease LCX 222 / LC 1,2; CASTROL LMX; GULFcrown LC; ESSO Unirex S / Beacon EP; TOTAL Multis Complex EP2 / S2 A / ; NESTE Superlix EP2 / Semilix 1,5 / Allrex EP 1,2 / Yleisrasva EP 1,2; SHELL Albida HD / RL / EP / Retinax LX2 / Alvania EP (LF); TEBOIL Multi-Purpose HT; TEXACO Starplex EP / Hytex EPTEXACO Multifak Premium 3; MOBILlux EP; 76 Unoba EP Grease 1,2; АZMOL Luvana EP / Lika P

KLS Rolling k-Li 12

Agrinol ProkatOl-0Agrinol ProkatOl -2

k-Ca 0 / 11 / 2

EXXON Nebula 1; CASTROL Spheerol BN1;SHELL Darina 2 / Alvania RL / LF / WR1,2 / Luveda EP 2MOBILplekx 47 / Mobilux EP 2; TEBOIL Universal CLS-1;BP Energrease PR 9143

Agrinol Uniol-2М-1Agrinol Uniol-2М-2

k-Ca 12

Agrinol ProkatOl ЕР 2 k-Ca 1 / 2

TEXACO CX EP2; ELF Multiplex EP2; TEBOIL Universal CLS-1; SHELL Alvania RL / LF / WR1,2 / Luveda EP 2; TOTAL Copal EP2 / Multis Complex EP 2; BP Energrease PR 9143

Agrinol LKS k-Li+C 1 / 2SHELL Albida HDX 2 / Darina R 2; BP Energrease LCX 222; MOBILgrease HP 222; AGIP Grease SM 2

Agrinol Termostan k-Li+Мо 2 AGIP Grease SM2; MOBILlith SHC 1000 Spesial;

76 Megaplex XD Grease 2; SHELL Albida HDX 2

PLATING GR k-Li 2 / 3

BP Energrease LC / LCX 222 / 103; CASTROL LMX; MOBILlux EP2,3ESSO Unirex N 2,3 / S 2 / Beacon EP 2; GULFcrown LC 2NESTE Superlix EP2; Q8 Rubens WB 2 / 3; TEBOIL Multi-Purpose HTSHELL Albida RL2 / Alvania RL2,3TEXACO Starplex EP2,3 / Hytex EP2 / Multifak Premium 3


158

Corr

espo

nden

ce t

able

pro

duct

s


Agrinol LS-1P Li 1

SHELL Albida RL / EP1 / Retinax EP / LX / Alvania EP (LF) 1 / Starplex EP 1ESSO Beacon EP1; BP Energrease LS-EP1; MOBILlux 1;.Q8 Rembrant EP 1; АZMOL Luvana EP 1 / Lika EP1,2;76 Unoda EP Grease 1

Heat-resistan lubricants

MOLYROLL GR 1MOLYROLL GR 2 Si+Mo 2

0

CHEVRON Moly Grease EP2; MOBILGREASE SPECIAL 2;ESSO Multy-Purpose Grease (Moly) 2; GULFlex Moly EP 2;NESTE Allrex M2 / Molygrease 2 / Avora 0; TEBOIL Universal M 2Q8 Rembrant Moly 2; SHELL Retinax SDX 2 / HDX 2 / Albida HDX 2;TEXACO Molytex EP 0,2;

Aerol-А Aerol -1А Si+Mo 20

EXXON Norva 275; ESSO Multy-Purpose Grease (Moly) 2MOBIL Mobiltemp 78 / Mobilgrease Special; TEBOIL Universal M 2TEXACO Molytex EP 0,2; NESTE Allrex M2 / Molygrease 2 / Avora 0;SHELL Retinax SDX 2 / HDX 2 / Albida HDX 2 / Rhodina EP 2

CIATIM-221 k-Ca 1 / 2 SHELL AeroShell Grease 15; Cluber Lubrication Asonic GHY 72

Agrinol Graphitol Si+C 2SHELL Albida HDX 2 / Rhodina EP 2; BP Energrease HTB;MOBILtemp 78 / Mobiltac 81

Agrinol VNII NP-219Agrinol VNII NP-210

к-Са+МоSi+Mo

0 / 11

NESTE Avora 0; 76 Triton XD5 Grease 0,1 / Megaplex XD Grease 1 TEXACO Molytex EP 0;

VNII NP-207 k-Ca 3 SHELL AeroShell Grease 15A, 22; Cluber Lubrication Asonic GHY 72

Chemically-stable lubricants

CIATIM-205VNII NP-279

OrganicSi

51 SHELL Petroleum Jelly S.6800 / Lipex OMB 2


159

MET

AL P

ACKI

NG

Cor

resp

onde

nce

tabl

e pr

oduc

ts


Drilling lubricants

Agrinol Dolotol АU k-Ca 0 / 1 DRESSER SG-304

Low-temperature lubricants

CIATIM -202 Li 2SHELL AeroShell Grease 6, 22; BP Energrease LS 2; ESSO Beacon 2;MOBILgrease 28;

CIATIM -203 Li 2 SHELL AeroShell Grease 6, 22; MOBILtemp SHC 220;

Rope lubricants

PROTECTING TG

Solid hydrocarbons -

SHELL Malleus Fluid GL 65; MOBIL Turex 610

Agrinol Torsiol 35B

BP Energol BL 450 – 2; EXXON Surett N270k; SHELL Malleus Fluid GL 65; MOBIL-Kote 336

Agrinol Torsiol 35E MOBIL Turex 610

Instrument lubricants

CIATIM -201 Li 2 SHELL AeroShell Grease 6, 22; MOBILgrease 28 / Mobiltemp SHC 32

OKB-122-7 Li 2 BP Energrease LS 2; ESSO Beacon P 290, 2; SHELL AeroShell Grease 6, 22; MOBILlux 2

Conservation (protective) lubricants

Cannon Lubricant Solid hydrocarbons 5 / 6

SHELL AeroShell Compound 05; MOBIL-Kote 336;EXXON Rust-Ban 326; BP Petroleum Jelly PY 3

Agrinol ZESThe

hydrocarbon, soapy

1 / 2 BP Energrease A1; SHELL Mutilus A, B

Sealing-threaded

Agrinol Kranol Са - SHELL Aviation Grease S 7108; LUCINA Grease

Paste ZZK-3u Al - Hermetol AZ (Poland); UE 130 Ca 5 (Romania)

Agrinol LZ-162у Li-Zn 4 / 5 Cluber Lubrication Staburags NBU 32

Agrinol Armatol-238 Si+C 0 / 1 Cluber Lubrication Staburags NBU 12C


160

MET

AL P

ACKI

NG

Cor

resp

onde

nce

tabl

e pr

oduc

ts


Agrinol Rez’bol ОМ-2 Si 0

Jet-Lube® APY Modifi ed; ESSO POWR Kote / Grease AS;SHELL High Pressure Modifi ed Thread Compound, Malleus TC;Bakerseal.Prod. N899-20

Reducer lubricants (semifl uid)

Transol A Li 00

SHELL Alvania EP 00 / LIQVI MOLY Fliessfett ZS 00; Q8 Rubens 00CASTROL CLS Grease 00; NESTE Center Grease 00 EP;76 Unoba EP Grease 00; TEXACO Multifak 6833 EP 00

CIATIM -208 Са 1 SHELL Alvania GL / LF; MOBILlux EP 023; TOTAL Multis EP 0

Break-in paste

VNII NP-232 Li+Mo 3 SHELL Aviation Grease S.54768; EXXON Aviation Anti-Seize;DG Molycot 17; CASTROL Compounl 1 / Impervia AS

Agrinol Limol А Li+Mo 1

VNII NP-225 Si+Mo 00

REFERENCE BOOK

161

Ann

ex

Annex

OİLS AND LCTP

Index name Volume in dm3

Railway tanks

Tankers

Barrels 216,5

Barrels 100

Barrels 60

Barrels 50

Canisters of different volume 0,5-20

GREASES

Barrels 213

Barrels 60

Metal drums 20

Plastic pails 10

Plastic pails 5

Cans 1

Cans 0,5

Cartridges 0,31

Eurocartridges 0,4

Tubes 0,25

In agreement with the customer the lubrication may be shipped in other types of packing designed to transport plastic products.

REFERENCE BOOK

162

Inde

x

Index

5W-30 SL/CF ........................................................ 95W-30 SM/CF ...................................................... 95W-40 SN / CF ...................................................... 910W-30 SM/CF ..................................................1110W-40 CI-4 ......................................................1110W-40 CI-4/SL ................................................11132-08 .................................................................76Aerol-1A ........................................................... 113Aerol-A .............................................................. 113Agrinol 1-13.......................................................91Agrinol 5W-40 CG-4/SJ ..................................10Agrinol 5W-40 SL/CF ......................................10Agrinol 10W-40 CF-4/SH ..............................13Agrinol 10W-40 CG-4/SJ ................................10Agrinol 10W-40 SG/CD ..................................13Agrinol 10W-40 SL/CF ...................................10Agrinol 15W-30 SF/CE ...................................14Agrinol 15W-40 CF-4/SG ...............................13Agrinol 15W-40 CG-4/SJ ................................12Agrinol 15W-40 CG-4/SL ...............................12Agrinol 15W-40 CH-4/SJ ...............................12Agrinol 15W-40 CI-4 .......................................12Agrinol 15W-40 SF/CC ...................................13Agrinol 15W-40 SG/CD ..................................13Agrinol 20W-40 SF/CC ...................................14Agrinol 20W-50 SF/CC ...................................14Agrinol A .............................................................40Agrinol Akvol-2 .............................................. 140Agrinol Akvol-2E ........................................... 140Agrinol Aqua Moto 2T ....................................21Agrinol Armatol-238 .....................................127Agrinol ATF ІІD..................................................37Agrinol ATF ІІI ...................................................37Agrinol AU ..........................................................41Agrinol BM-1 .....................................................71Agrinol BM-3 .....................................................71Agrinol BM-4 .....................................................71Agrinol BM-5 .....................................................72

Agrinol BM-6 .....................................................72Agrinol BM-11 ...................................................72Agrinol Buksol................................................ 108Agrinol Dolotol N .......................................... 118Agrinol Dolotol АU ....................................... 118Agrinol EHP ..................................................... 138Agrinol EKS-5 ................................................. 142Agrinol EТ-2U ................................................ 139Agrinol GK ..........................................................50Agrinol Grafi tol .............................................. 114Agrinol Gun Lodge RG ....................................74Agrinol Gun Lodge VO ....................................74Agrinol Hidrofobinol-I ................................. 130Agrinol HP ....................................................... 138Agrinol İ100PV ..................................................59Agrinol İ100PVs ................................................59Agrinol İNSp-20 ................................................61Agrinol İNSp-40 ................................................61Agrinol İNSp-65 ................................................61Agrinol İNSp-110 .............................................61Agrinol İP-1l ................................................... 101Agrinol İP-1z ................................................... 101Agrinol KM-22...................................................51Agrinol Kranol ................................................ 126Agrinol KS-19p .................................................46Agrinol LimolA ............................................... 129Agrinol LZ-162u .............................................127Agrinol Marine TBN 15 ..................................23Agrinol Marine TBN 15 ..................................23Agrinol MGD-14m ............................................48Agrinol Moto Drive 2T ....................................22Agrinol Moto Drive 4T ....................................22Agrinol Moto Racer 2T ...................................21Agrinol MP ..........................................................73Agrinol MP Plus ................................................73Agrinol MPT-2m ...............................................73Agrinol MS-8p ...................................................43Agrinol MS-20 ...................................................64

IndexREFERENCE BOOK

163

Inde

x

Agrinol MS-20p ................................................64Agrinol MS-20ps ..............................................64Agrinol MULTIPLEX GL-5 SAE-90 ...............31Agrinol MULTIPLEX SAE 140 GL-5 .............31Agrinol MZ-8 ......................................................67Agrinol MZ-16 ...................................................67Agrinol MZ-38 ...................................................67Agrinol MZ-90 ...................................................67Agrinol MZ-120 .................................................67Agrinol MZM-16 ...............................................68Agrinol MZM-26 ...............................................68Agrinol MZM-120 .............................................68Agrinol MZT .....................................................107Agrinol Nigrol-L ................................................36Agrinol No158 ...................................................86Agrinol No158M ...............................................86Agrinol OM ...................................................... 139Agrinol PJT-46 ...................................................62Agrinol PJT-220 ................................................62Agrinol PJT-460 ................................................62Agrinol PJT-460U .............................................62Agrinol Polynol .................................................95Agrinol Polynol ЕР1 ........................................95Agrinol Polynol ЕР2 ........................................95Agrinol ProkatOl ЕР 2 .................................. 102Agrinol PS-20 ....................................................60Agrinol PS-28z ..................................................60Agrinol Puma-Мl ........................................... 110Agrinol Puma-Мz .......................................... 110Agrinol R .............................................................40Agrinol Refoil 10KS .........................................47Agrinol Relsol GS .......................................... 110Agrinol Relsol M ............................................ 110Agrinol Rezbol OM-2 ....................................127Agrinol RG ....................................................... 142Agrinol Rope 39U.......................................... 121Agrinol SAE 10W CF-4 ...................................15Agrinol SAE 30 CF-4 .......................................15

Agrinol SAE 40 CF-4 .......................................15Agrinol SAE 50 CF-4 .......................................15Agrinol ShRB-4 .................................................86Agrinol Solidol ..................................................81Agrinol TEMP-3KN ........................................137Agrinol Termol ..................................................69Agrinol Termol-1 ........................................... 111Agrinol Termol-2 ........................................... 111Agrinol Torsiol-35B/1 .................................. 122Agrinol Torsiol-35B/2 .................................. 122Agrinol Torsiol-35E....................................... 122Agrinol Tosol-30 .............................................147Agrinol Tosol-40 .............................................147Agrinol Tosol-65 .............................................147Agrinol Tosol A-40 ........................................ 148Agrinol Tosol TA ............................................. 148Agrinol TSp-10 ..................................................35Agrinol TSp-14gip ...........................................35Agrinol TSp-15K ...............................................35Agrinol Uniol-2M-1 ...................................... 102Agrinol Uniol-2M-2 ...................................... 102Agrinol VMGZ ....................................................41Agrinol VNİİ NP -210 ................................... 115Agrinol VNİİ NP -219 ................................... 115Agrinol ZES ..................................................... 125Agrinol ZhRO .................................................. 108Agrinol ZhT-72 ............................................... 109Agrinol ZhT-79L ............................................. 109Agrinol ZhTКZ-65 ......................................... 109Agrinol КEТ-1 ................................................. 135Agrinol КEТ-1M ............................................. 135Agrinol М-14B ...................................................29Agrinol М-14D2 .................................................28Agrinol М-14D2U ..............................................28Agrinol М-14G2k ...............................................18Agrinol МS-20gk ..............................................64Agrinol МТ-16P .................................................29Agrinol ТSzp-8 ..................................................34

IndexREFERENCE BOOK

164

Inde

x

Agrinol ТАD-17i ................................................34Agrinol ТАp-15В ...............................................34Agrniol Termostan ........................................ 100AMG-10 ...............................................................41AMS-1 ............................................................... 124AMS-3 ............................................................... 124Anticor-270 ........................................................74Arginol Nigrol-Z ...............................................36BENTOL-1 M ......................................................96Cannon Lubricant ......................................... 125Chain Saw Oil EXPERT ...................................24Chain Saw Oil Standard .................................25CİATİM-201 ..................................................... 123CİATİM-202 ..................................................... 119CİATİM-203 ..................................................... 119CIATIM-205 ..................................................... 116CİATİM-208 ..................................................... 128CIATIM-221 ..................................................... 114Classic SAE 80W-90 API GL-4 ......................30Cold Roller ........................................................137Crystal ............................................................... 149Cylinder oil 38...................................................63Cylinder oil 52...................................................63Form Divider ......................................................75Form Divider M .................................................75Gold SAE 80W-90 API GL-5 ..........................30Graphite grease ................................................82Grease Agrinol Fiol -2U ..................................85Grease Agrinol ShRUS -4 ...............................85Green Rubber Grease ......................................83HA-30 ...................................................................47HDS 460 ..............................................................95HF 12-16 .............................................................47HF 22-24 .............................................................47Highrate XP ........................................................57Hydraulic Lift .....................................................55Hydroil HM .........................................................53Hydroil HM Ultra ..............................................56

İ-5A .......................................................................65İ-8A .......................................................................65İ-12A .....................................................................65İ-12A1 ...................................................................65I-20А .....................................................................66I-30А .....................................................................66I-40А .....................................................................66I-50А .....................................................................66K-12 ......................................................................46K-19 ......................................................................46KAS-1SM .......................................................... 139Kompressoil .......................................................44Konstalin-1 grease ..........................................91Konstalin-2 grease ..........................................91KS-19 ...................................................................46Ligrease 00 ........................................................87Ligrease 0 ...........................................................87Ligrease 1 ...........................................................87Ligrease 2 ...........................................................88Ligrease 3 ...........................................................88Ligrease ЕР 00 ..................................................89Ligrease ЕР 0 .....................................................89Ligrease ЕР 1 .....................................................89Ligrease ЕР 2 .....................................................90Ligrease ЕР 3 .....................................................90low SAPS .............................................................11LubriLiCa .......................................................... 103LZ-CNİİ ...............................................................107M-8V .....................................................................20Molyroll EP1 ......................................................84Molyroll EP2 ......................................................84Molyroll EP3 ......................................................84MOLYROLL GR1 ............................................. 112MOLYROLL GR1 ............................................. 112MR-7 .................................................................. 135MR-7B ............................................................... 135MVP .......................................................................76OKB 122-7 ....................................................... 123

IndexREFERENCE BOOK

165

Inde

x

PELLETON EP ....................................................93PELLETON EP ....................................................93PELLETON SKS .................................................94PELLETON SKS .................................................94Plating GR ....................................................... 105Platinum SAE 75W-90 API GL-5..................30PROTECTING TG ............................................ 120PS-28 ....................................................................60Red Calcium Grease ........................................83RG-1s ................................................................. 141RG-2s ................................................................. 141Rolling GR S .................................................... 106Rolling GR SW ................................................ 106Rolling GR W ................................................... 106SAE 85W-140 API GL-5 ..................................30SGT ........................................................................42Silver SAE 85W-90 API GL-5 ........................30SKS 300 m-1* ....................................................92SKS-300 m-1 .....................................................92SKS 300 m-2* ....................................................92SKS-300 m-2 .....................................................92Sliding EP 2 SHC 220 .....................................99Sliding GR 00 ....................................................97Sliding GR 0 .......................................................97Sliding GR 1 .......................................................98Sliding GR 2 .......................................................98SP-3 ................................................................... 138Special Oil ART .................................................58Special Oil HMT ................................................40STOU SAE 10W-30 ...........................................38STOU SAE 10W-40 ...........................................38TK ..........................................................................49TL Effort ........................................................... 136Transol-100A .................................................. 128Transol-200A .................................................. 128TSO .......................................................................50TSp-10 .................................................................33TSp-14gip ...........................................................33

TSp-15K ..............................................................33UTTO 80W ..........................................................39UTTO 85W ..........................................................39VNİİ NP -207 ................................................... 115VNİİ NP-225 .................................................... 129VNİİ NP-232 .................................................... 129VNİİ NP-263 .................................................... 126VNİİ NP -279 ................................................... 116VNİİ NP -282 A ................................................117VNİİ NP -282M A ............................................117ZZK-3u .............................................................. 126АМТ-300 ..............................................................70К-17 .....................................................................74М-6z/12G1 ..........................................................20М-8DМ .................................................................19М-8G2 ...................................................................16М-8G2k .................................................................16М-10DМ ..............................................................19М-10G2 .................................................................17М-10G2k ...............................................................17М-10V2 .................................................................18М-14DTsL20 .......................................................26М-14DTsL30 .......................................................26М-14V2 .................................................................23М-16G2TsS .........................................................23М-20G2 .................................................................29М-20V2F...............................................................27М-20Е70 .............................................................27Т-1500 .................................................................49Тp-22 ....................................................................42Тp-30 ....................................................................42Тp-46 ....................................................................42ТАD-17i ...............................................................32ТАp-15В...............................................................32

NotesREFERENCE BOOK

166

Not

es

NotesREFERENCE BOOK

167

Not

es

NotesREFERENCE BOOK

168

Not

es

www.agrinol.ua

LUBRICANTS

REFERENCE BOOK

lubricantsagrinol.ua/ref_book_en.pdfwith gost 23652-79 ..... 32 agrinol transmission oils ..... 34...

Documents