hydraulic oils «agrinol» premium...

HYDRAULIC OILS«AGRINOL»

PREMIUM GROUP

2012

DSTU ISO 9001:2009 (ISO 9001:2008)

RU SIE «AGRINOL» Tel./Fax.: +38 06153 60-600 E-mail: [email protected] http://www.agrinol.ua

2016

FROM 2009ELGI member

(European Lubricating Grease Institute)

MAIN PRODUCTS

MANUFACTURING of METAL STEEL PACKAGING MANUFACTURING of LCPT(Lubricating and Cooling Technological Liquids)

FROM 2006The quality control system of the enterprise (manufacturing of theoil refinery products, special lubricating materials and metal drums)is certificated under the international standard.

DSTU ISO 9001:2009 (ISO 9001:2008)

FROM 2010

REACH active

LLC RU SIE «AGRINOL»

FROM 2012NLGI member

(National Lubricating Grease Institute)

More than 100 types of GREASES: More than 100 types of OILS:

FROM 2010

• general-purpose greases• multipurpose greases• car greases• industrial greases• railway greases

• rope and conservation greases• low-temperature greases• heat-resistant greases• special greases

• motor oils (car, vessel and diesel)• industrial oils• transmission oils• hydraulic oils

• axial oils • power oils• annealing oils• special oils


http://echa.europa.eu/

«AGRINOL» LUBRICATING MATERIALS OVERWIEWPREMIUM HYDRAULIC OILS

HYDRAULIC OILSHydroil НМ 10; 22; 32; 46; 68; 80; 100; 120; 150; 200; 270; 330

«Cl Free» Hydraulic oils with excellent anti-oxidation and anti-wearproperties operate in conditions of high pressure and extreme loads.HLP according to DIN 51524.2; НМ according to ISO 6743-4.

Hydroil НМ Ultra22; 32; 46; 68; 100

Zn-Free hydraulic oils «Cl Free & Zinc Free» with excellent anti-oxidation and anti-wear properties are used in hydraulic drives thatcontain non-ferrous metals and alloys in construction elements, andoperating vapors are characterized by extremely small gaps betweenunits.HLP according to DIN 51524.2 ; НМ according to ISO 6743-4.

AgrinolHydraulic Lift22; 32; 46; 68; 100

High-index hydraulic oils with excellent anti-wear properties foroperation under the wide temperature range, significant temperatureoscillations, high working pressures, in case of water cut conditionsand/or excellent shear stability and anti-wear protectionrequirements.HVLP according to DIN 51524.2; НМ according to ISO 6743-4.


3

HM // HLP 100 HM // HLP 120 HM // HLP 150 HM // HLP 200 HM // HLP 270 HM // HLP 330Operating temperature range

-10 … +75 оС -10 … +75 оС -10 … +80 оС -10 … +90 оС -10 … +90 оС -10 … +95 оСModern hydraulic and circulating systems (if there is no prescription for other special oils). Stationary hydraulic systems with plate and piston pumps (radial-piston, axial pumps) at high operational pressures (more than 200 bars), in case when oils with excellent anti-oxidation and anti-wear properties are needed.

Mobile hydraulics: trucks, excavators and heavy machinery.For lubrication of loaded gears, worm gears, gearboxes and other equipment units (mining, metallurgical and other industries).For lubrication of worm extruders, pinion gears, mid-loaded gears and

worm gears, circulating systems of various equipment (mining, metallurgical and other industries).

HYDROIL НМ ТS U 23.2-30802090-114:2009

HM // HLP 10 HM // HLP 22 HM // HLP 32 HM // HLP 46 HM // HLP 68 HM // HLP 80

Operating temperature range

-25 … + 55 оС -20 … + 55 оС -18 … + 60 оС -18 … +65 оС -18 … +70 оС -15 … + 70 оСModern hydraulic and circulating systems (if there is no prescription for other special oils). Stationary hydraulic systems with plate and piston pumps (radial-piston, axial pumps) at high operational pressures (more than 200 bars), in case when oils with excellent anti-oxidation and anti-wear properties are needed.

Hydraulic drives’ and hydro control systems of building, road, handling and other machinery(winter oils).Presses and scissors for metal.

Mobile hydraulics: trucks, excavators and heavy machinery.

Presses, truck hydraulic systems, worm extruders. Bevel and cylindrical gear wheels.

Machining equipment. Rolling and sliding bearings.

* For piston pumps : limits can be higher up to 5 оС (lower limits) or 10 оС (upper limits). * Oil temperature in the oil tank should not exceed 80 оС to ensure long operating period.

PREMIUM GROUP HYDRAULIC OILSHYDROIL HM


Properties HYDROIL HM Compliance with

Classifications:ISO VGISO 6743 DIN 51524.2

10 HMНLP

22HMHLP

32 HMHLP

46 HMHLP

68 HMHLP

80 HMHLP

100 HMНLP

120HMHLP

150HMHLP

200HMHLP

270HMHLP

330HMHLP

Kinematic viscosity at 40°С,mm²/s: 8-14 18-26 28-36 42-50 61-75 76-85 90-

110110-125

148-165

186-205

265-280

320-348

Viscosity index, not less than 108 100 98 97 94 92 91 90 90 90 90 90

Acid number, mg КОН/g, not more than 0,7

Temperature, °С:• open cup flash point, not lower than• pour point, not higher than

160

-30

170

-27

190

-24

200

−24

210

-24

215

-20

220

-18

220

-15

225

-15

230

−15

230

-15

240

-15

Ash content, %, not more than 0,2

Color, CNT units, at 15/85 dilution,not more than 1,0 1,5 2,0

Mass fraction of sulfur, %, not more than 0,5 0,8 1,0

Density at 20°С, g/sm3 , Not more than 900 910

4

PREMIUM GROUP HYDRAULIC OILSHYDROIL HM

PHYSICAL and CHEMICAL CHARACTERISTICS


HYDROIL HM ULTRA ТS U 23.2-36451680-155:2010

HM // HLP 22 HM // HLP 32 HM // HLP 46 HM // HLP 68 HM // HLP 100Operating temperature range

-25 … + 60 оС -25 … + 65 оС -25 … +70 оС -20 … +75 оС -15 … + 80 оС

Modern hydraulic and circulating systems (if there is no prescription for other special oils). Stationary hydraulic systems with plate and piston pumps (radial-piston, axial pumps) at high operational pressures (more than 200 bars), in case when oils with excellent anti-oxidation and anti-wear properties are needed.

For hydraulic drives that contain non-ferrous metals and alloys in construction elements.

Hydraulic drives’ and hydro control systems of building, road, handling and other machinery (winter oils).Presses and scissors for metal.


Circulating lubrication systems for various equipment of mining, metallurgical and other industries.Presses, truck hydraulic systems, worm extruders. Bevel and cylindrical gear wheels.

Machining equipment. Rolling and sliding bearings

PREMIUM GROUP HYDRAULIC OILSHYDROIL HM ULTRA

Absence of heavy metals and zinc compounds is safe for environment, human health and facilitates product recycling.

(Cl Free & Zinc Free)

Hydraulic oils are manufactured by traditional technologies and contain Zn-compound based anti-wear additives.Zinc dithiophosphates are unstable in conditions of water contact and/or high temperatures. Burning of wasted oils makeszinc go to the atmosphere and pollute environment.


Properties HYDROIL HM ULTRACompliance with Classifications:

ISO VGSO 6743 DIN 51524.2

22 HMHLP

32HMHLP

46 HMHLP

68 HMHLP

100 HMНLP

Kinematic viscosity at 40°С, mm²/s: 18-26 28-36 42-50 61-75 90-110

Viscosity index, not less than 100 100 100 95 91

Acid number, mg КОН/g, not more than 0,3

Temperature, °С:• open cup flash point, not lower than• pour point, not higher than

170-30

190-30

205- 30

210−25

220-20


Color, CNT units, at 15/85 dilution, not morethan 1,0 1,5

Mass fraction of sulfur, %, not more than 0,5 0,8

Wear scar diameter at 300N, mm, not more than 0,4

Density at 20°С, g/sm3, not more than 900 910

APPROVALS and LABORATORY TESTINGHYDROIL HM ULTRA

HYDROIL HM ULTRA oil passed testing of theBFB Oil Research S.A. (Belgium) for DIN 51524.2 compliance.

PHYSICAL and CHEMICAL CHARACTERISTICS


PREMIUM HYDRAULIC OILSComparative characteristics of Zn-Free Hydraulic oils

Компания “АГРИНОЛ” Tel./Fax.: +38 06153 60-600 E-mail :[email protected] http://www.agrinol.com.ua

COMPARATIVE CHARACTERISTICS of Zn-Free OILS

PropertiesShell

Tellus S22

АгринолHydroil

Ultra HM 22

Shell Tellus S 32


Ultra HM 32

Shell Tellus S 46


Ultra HM 46

Shell Tellus S 68


Ultra HM 68

Shell Tellus S 100


Ultra HM 100

Classification HLP HLP HLP HLP HLP HLP HLP HLP HLP HLP

Kinematic viscosity, mm²/s at 40°С at 100°С

224,3

18-26-

325,4

28-36-

466,8

42-50-

688,7

61-75-

688,7

90-110-

Viscosity index, not less than 100 100 99 98 98 95 97 94 96 91

Ash content, %, not more than - * 0,1 - * 0,1 - * 0,1 - * 0,1 - * 0,1

Temperature, °С: open cup flash point pour point

204-30

170-35

207-30

190-30

218-30

205-30

222-30

210-28

234-30

220-24

SUBTITUTES of the oilsHYDROIL HM / HYDROIL HM ULTRA

ESSO NUTO H 32, 46, 68, 100, 150, 220, 320

MOBIL Mobil DTE Excel 32,46,68Hydraulic Oil AW Range

CASTROL Hyspin AWS - 22

RAVENOL Hydraulikol HLP/ HLP TS 15, 22, 32, 46, 68, 100

TOTAL AZOLLA AF, AZOLLA ZS 22, 32, 46, 68, 100

BPEnergol HLP Z 22, 32, 46, 68, 100, 150 Energol HP Series Bartan (Zinc Free)22, 32, 46, 68, 100, 150

АЗМОЛ AVELUS® 15, 22, 32, 46, 68, 100

TEXACO RANDO HD, HDZ 15, 22, 32, 46, 68, 100

TEBOIL Hydraulic Lift 32,46

NESTE Paine 32, 46, 68, 100

SHELL Tellus, Tellus S 15, 22, 32, 46, 68, 100;Tellus C Range

ADDINOL Hydraulikole HLP…S15, 22, 32, 46, 68, 100


7

AGRINOL HYDRAULIC LIFT ТS U 23.2-36451680-154:2010

HV // HVLP 22 HV // HVLP 32 HV // HVLP 46 HV // HVLP 68 HV // HVLP 100

Operating temperature range

-35 … + 65 оС -35 … + 65 оС -35 … +70 оС -33 … +75 оС -33 … + 75 оСModern hydraulic and circulating systems (if there is no prescription for other special oils). Stationary hydraulic systems with plate and piston pumps (radial-piston, axial pumps) at high operational pressures (more than 25MPa)Are recommended for operation under extreme temperatures, significant temperature oscillation, in case of water cut conditions and/or excellent shear stability and anti-wear protection requirements.

Hydraulic drives’ and hydro control systems of building, road, handling and other machinery (winter oils). Presses and scissors for metal.



Machining equipment. Rolling and sliding bearings.

Are recommended for operation under extreme temperatures, significant temperature oscillation, in case of water cut conditions and/or excellent shear stability and anti-wear protection requirements.

PREMIUM GROUP HYDRAULIC OILSAGRINOL HYDRAULIC LIFT


Properties AGRINOL HYDRAULIC LIFT

Compliance with Classifications:ISO VGISO 6743 // DIN 51524.2

22 HM/HVLP

32 HM/HVLP

46 HM/HVLP

68 HM/HVLP

100 HM/НVLP

Kinematic viscosity at 40°С, mm²/s: 18-26 28-36 41–51 61-75 90-110

Viscosity index, not less than 130

Acid number, mg КОН/g, not more than 0,5-1.0

Temperature, °С:• Open cup flash point, not lower than• Pour point, not higher than

160-40

170-40

180- 40

190−38

200-38


Color, CNT units, not more than 4,5 5,0 5,5 5,5 6,0

Mass fraction of mechanical impurities Absence

Mass fraction of water Absence

Corrosion on metals Pass

PREMIUM GROUP HYDRAULIC OILSAGRINOL HYDRAULIC LIFT

PHYSICAL and CHEMICAL PROPERTIES


Hydroil НМ 46

-35 -30 -5 0 10 20 30 40 100-10-15-20-25AgrinolHydraulic Lift 46

Kin

emat

ic v

isco

sity

, сSt

Т, оС

AGRINOL HYDRAULIC LIFT operating temperature rangeHV // HVLP 22 HV // HVLP 32 HV // HVLP 46 HV // HVLP 68 HV // HVLP 100

-35 … +65 оС -35 … +65 оС -35 … +70 оС -33 … +75 оС -33 … +75 оС

HYDROIL НМ operating temperature rangeHM // HLP 10 HM // HLP 22 HM // HLP 32 HM // HLP 46 HM // HLP 68 HM // HLP 80 HM // HLP 100

-20 … +55 оС -20 … +55 оС -15 … +60 оС -15 … +65 оС -15 … +70 оС -15 … +70 оС -10 … +75 оС

HYDRAULIC OIL VISCOSITY DEPENDANCE on TEMPERATURE

«AGRINOL HYDRAULIC LIFT» hydraulic oil has flatter viscosity-temperature curve and is recommended as a low-temperature oil for exploitation in the systems under a wide temperature range and significant temperatureoscillation.

17RU SIE «AGRINOL» Tel./Fax.: +38 06153 60-600 E-mail: [email protected] http://www.agrinol.ua

Properties HYDROIL НМ 46

Compliance with Classifications:ISO VGISO 6743 // DIN 51524.2

22 HM/HVLP

Kinematic viscosity at 40°С, mm²/s: 44-50

Viscosity index, not less than 100

Acid number, mg КОН/g, not more than 0,5-0,7

Temperature, °С:• Open cup flash point, not lower than• Pour point, not higher than

190−28


Color, CNT units, not more than 4,5

Mass fraction of mechanical impurities Absence

Mass fraction of water Absence

Corrosion on metals Pass

9

HYDROIL НМ 46 ТS U 23.2-30802090-060:2006

HМ // HLP 46

Operating temperature range -20 … + 75 оС

Modern hydraulic and circulating systems (if there is no prescription for other special oils). Stationary hydraulic systems with plate and piston pumps (radial-piston, axial pumps) at high operational pressures (more than 200 bars), in case when oils with excellent anti-oxidation and anti-wear properties are needed.



Machining equipment. Rolling and sliding bearings

PREMIUM GROUP HYDRAULIC OILSHYDROIL НМ 46


«Hydroil HM» and «HYDROIL НМ 46» oils pass industrial testing, are agreed and approved for industrial exploitation:

SE “DonGiproUgleMash”

Svitlo Shakhtarya Machine Building Plant, PJSC

Donetsk Coal Energy Company

DTEK LLC

Yasinovatskiy Machine Building Plant

Donetskgirmash, PAT

“NKMZ” JSC.

10

Alchevsk Iron & Steel Works, PJSC

"Azovstal Iron & Steel Works, PJSC

LABORATORY TESTING and APPROVALS

HYDROIL HM ULTRA oil passes the DIN 51524.2 compliance test

BFB Oil Research S.A. (Belgium)

INDUSTRIAL TESTING and APPROVALS


11

INDUSTRIAL TESTING

«HYDROIL НМ 46»INDUSTRIAL TESTING

«HYDROIL HM»INDUSTRIAL TESTING


SUBTITUTES OF HYDRAULIC OILS

ESSO NUTO H 32, 46, 68, 100, 150, 220, 320UNIVIS N 32, 46, 68, 100

MOBIL

Mobil DTE Excel 32,46,68;Mobil DTE 11M, 13M, 15M, 16M, 18MHydraulic Oil AW Range; Hydraulic Oil 12 (22) 13, 15, 16, 18

CASTROLHyspin AWS – 22Hyspin AWH 15, 32, 46, 68, 100 Agricastrol Tipping H 46,68

RAVENOL Hydraulikol HLP/ HLP TS 15, 22, 32, 46, 68, 100Hydraulikol TSX 15,22,32,46,68,100

TOTAL AZOLLA AF, AZOLLA ZS 22, 32, 46, 68, 100EQUIVIS XV 32,46

BP

Energol HLP Z 22, 32, 46, 68, 100, 150 Energol HP Series Bartan (Zinc Free)22, 32, 46, 68, 100, 150Energol SHF 32, 46, 68, 100, Bartran HV 32, 46, 68, 100, 150 (Zinc Free) 17

АZMOL AVELUS® 15, 22, 32, 46, 68, 100AVELUS®V 15, 22, 32, 46, 68, 100

TEXACO RANDO HD, HDZ 15, 22, 32, 46, 68, 100RANDO HDZ, HDZ LT 15,22,32,46,68,100

TEBOIL Hydraulic Lift 32,46Hydroulic Oil 15,22,32,46,68,100

NESTE Paine 32, 46, 68, 100Hydrauli Super 15,22,32,46,68,100

SHELLTellus, Tellus S 15, 22, 32, 46, 68, 100Tellus C RangeTellus TX, T 15,22,32,46,68,100

ADDINOL Hydraulikole HLP…S 15, 22, 32, 46, 68, 100Hydraulikole HVLP, HVLPD 15,22,32,46,68,100

CHEVRON Chevron Clarity Hydraulic Oils AW 32,46,68Chevron Premium Oil 15,22,32,46,68,100

ТNК Contur, Hydraulic HLP

HYDROIL HM / HYDROIL HM ULTRA / AGRINOL HYDRAULIC LIFT

13RU SIE «AGRINOL» Tel./Fax.: +38 06153 60-600 E-mail: [email protected] http://www.agrinol.ua

THANK YOU for YOUR ATTENTION!

+38 (06153) 60-600

[email protected]

71100, Zaporozhye region, Berdyansk,Melitopolskoye highway 84/1.

agrinol.ua


hydraulic oils «agrinol» premium...

Documents