www.AshleyEdisonUK.com

VR– F/G -500-5000-APRIL-2019

VR SERIES

AC AUTOMATIC

VOLTAGE STABILISERS

& LINE CONDITIONERS

500VA to 5000VA

SINGLE PHASE - 2 WIRE

50 / 60Hz

F & G Models

220V / 230V / 240V

Product Data

Brownout & Over / Under

Voltage Protection

Transient Voltage Surge

& Spike Protection

Choice of Input Voltage Ranges

Restart Time Delay / Waiting

√

√

√

- G Models - 80 to 270V

Time to Limit Nuisance Tripping √

Automatic Voltage Regulation

Spike & Surge Protection

Electrical Noise Filter

Basic Lightning Surge Protection

Restart Time Delay

Fast Response

Solid State

Maintenance Free

Lightning Surge Protection

Basic Electrical Noise & √

- F Models - 140 to 270V

Inbuilt Manual Bypass √

MINI

VOLTAGE STABILISERS & CONDITIONERS VR SERIES - F & G MODELS

Copyright 2019 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.

www.AshleyEdisonUK.com

FRONT DISPLAY PANEL

500VA (500W) 1000VA (1000W)

2000VA (2000W) 3000VA (3000W)

5000VA (5000W)

By boosting low voltages and stepping down high

voltages, they ensure a stable output voltage. In

addition, Mini VR Series Voltage Stabilisers safeguard

against all too common everyday transient voltages

and spikes - typically introduced into the mains supply

by nearby disturbances resulting from peak power

demands or stop / start operation of electrical

machinery.

Capable of supporting all electrical and electronic

modern office and general household appliances

(including air conditioners, computers, fridges, TV,

satellite and any other electrical loads, models are

available for situations where the incoming mains

utility supply is between 140V to 270V (F Models) or,

for more challenging power environments, 80V to

270V (G Models).

Low Cost Protection For Today’s Modern Power Needs

The Mini VR Series AC Automatic Voltage Stabiliser

range is based on 5 different power ratings:

Principle of Operation

Under normally running conditions the stabiliser will

continuously monitor the rise and fall of the incoming

utility mains supply. On detection of change in the

supply it will energize the most appropriate electro–

magnetic switch for selecting the most suitable output

winding tap to correct and stabilise the voltage. As a

result the load equipment connected to the stabiliser

will receive a safe, tolerable voltage and be able to

operate reliably - irrespective of the fluctuating and

irregularities of the incoming voltage supply.

Mini VR Series AC Voltage Stabilisers are intended as

low cost solutions, being designed around an auto

transformer with a single input and multiple outputs.

The outputs are arranged in steps / taps delivering a

higher or lower voltage.

FRONT VIEW REAR VIEW

GENERAL TECHNICAL SPECIFICATION

RATINGS VA / WATTS 500, 1000, 2000, 3000 & 5000 VA / WATTS

NOMINAL INPUT VOLTAGES

F MODELS 220V - 230V - 240V AC Single Phase, 2 Wire (L,N & G/E)

G MODELS 220V - 230V - 240V AC Single Phase, 2 Wire (L,N & G/E)

INPUT VOLTAGE RANGE See Relevant Model Selection Tables

OUTPUT VOLTAGE ACCURACY 230V ±5% (F Models) 230V ±10% (G Models)

OPERATING FREQUENCY 50 / 60 Hz (35 to 63 Hz)

RESTART TIME DELAY 10 Seconds - To prevent nuisance tripping and protect sensitive equipment against damage. Count down displayed on Display Front Panel

SURGE SUPPRESSION TVSS - Protects loads against high-energy Spikes and Transient Voltages

SURGE RATING 300 Joules

OVERLOAD RATINGS 10 x Max. Current for 10 milliseconds 5 x Max. Current for 1 second 3 x Max. Current for 1 minute

NOISE FILTERING LC Filter delivering Common Mode 60dB@100kHz & Normal Mode 40db@100kHz

RESPONSE TIME 200 milliseconds

EFFICIENCY ≥98%

MANUAL BYPASS Manual Bypass with Mechanical Interlocking

OVER / UNDER VOLTAGE Display Indication with Output Automatically Disconnected

OVERLOAD PROTECTION Display Indication with Output Automatically Disconnected

SHORT-CIRCUIT PROTECTION Automatic Tripping of the Input Circuit Breaker / Switch

OVER TEMPERATURE Display Indication with Output Automatically Disconnected

LOSS OF SUPPLY Auto Restart on return of the utility supply

DIGITAL DISPLAY METERING Showing Input Volts, Output Volts & Load Current (Amps)

ALARMS / INDICATIONS Restart Delay, Normal, Irregularity, Low Volt, Over Volt, Overload & Over Temperature

OPERATING TEMPERATURE 0 to 45°c. Derate by 2% for each additional °c up to max. of 60°c

MAXIMUM ALLTITUDE 4000 meters. Derate by 2.5% for each additional 500 metres

RELATIVE HUMIDITY Suitable for indoor tropical use up to 90% RH (non-condensing)

EMC CONFORMANCE Complies with BS/EN 55022 & the relevant parts of BS/EN 61000 standards

CE CERTIFICATION CE Marked – being fully compliant with European Union Directives 2014/30/EU (The EMC Directive) and 2014/35/EU (The Low Voltage Directive)

CONSTRUCTION Freestanding Enclosures to IP20 (NEMA 1 Style) - BS/EN 60529

COLOUR RAL 1013 (Oyster White - Epoxy Powder Coat)

INPUT & OUTPUT CONNECTIONS

See Relevant Model Selection Tables

PHYSICAL SIZES & WEIGHTS See Relevant Model Selection Tables

STANDARD WARRANTY 24 Months / 2 Years

VR– F/G -500-5000-APRIL-2019

SELECT THE MOST APPROPRIATE VR MODEL VR SERIES - MODEL RANGES

www.AshleyEdisonUK.com

500VA (500W) 1000VA (1000W)

2000VA (2000W) 3000VA (3000W)

5000VA (5000W)

VR-F Series Models

The Mini VR-F Series AC Voltage Stabiliser / Power Line

Conditioner range is based on 5 different power ratings:

VR-G Series Models

VR-F MODELS - SELECTION TABLE

MODEL NUMBER VR-500F VR-1000F VR-2000F VR-3000F VR-5000F

MAX. RATING VA / WATTS 500 1000 2000 3000 5000

AMPS 2.1 4.3 8.6 13 21.7

INPUT VOLTAGE WINDOW 140V to 270V AC Single Phase, 2 Wire (L,N & G/E)

OUTPUT VOLTAGE 220V - 230V - 240V Single Phase, 2 Wire (L,N & G/E)

OUTPUT VOLTAGE ACCURACY 230V ±5%

MAX. INPUT CURRENT 3.6 Amps 7.2 Amps 14.3 Amps 21.5 Amps 35.9 Amps

INPUT & OUTPUT CONNECTIONS

IEC 320 C13 with 2 x IEC Power Cables

Screw Terminals

PHYSICAL SIZE

(W x H x D)

- UNPACKED ( mm) 205 x 215 x 280 235 x 275 x 350 280 x 295 x 380

- PACKED (cm) 40 x 30 x 30 50 x 42 x 40

WEIGHT - UNPACKED 6 Kg 9 Kg 14 Kg 16 Kg 25 Kg

- PACKED 9 Kg 11 Kg 17Kg 20 Kg 29 Kg

VR-G MODELS - SELECTION TABLE

MODEL NUMBER VR-500G VR-1000G VR-2000G VR-3000G VR-5000G

MAX. RATING VA / WATTS 500 1000 2000 3000 5000

AMPS 2.1 4.3 8.6 13 21.7

INPUT VOLTAGE WINDOW 80V to 270V AC Single Phase, 2 Wire (L,N & G/E)

OUTPUT VOLTAGE 220V - 230V - 240V Single Phase, 2 Wire (L,N & G/E)

OUTPUT VOLTAGE ACCURACY 230V ±10%

MAX. INPUT CURRENT 6.3 Amps 12.5 Amps 25.0 Amps 37.5 Amps 62.5 Amps

INPUT & OUTPUT CONNECTIONS

IEC 320 C13 with 2 x IEC Power Cables

Screw Terminals

PHYSICAL SIZE

(W x H x D)

- UNPACKED ( mm) 205 x 215 x 280 235 x 275 x 350 280 x 295 x 380

- PACKED (cm) 40 x 30 x 30 50 x 42 x 40

WEIGHT - UNPACKED 7 Kg 10 Kg 15 Kg 19 Kg 27 Kg

- PACKED 10 Kg 13 Kg 18 Kg 23 Kg 31 Kg

220V / 230V / 240V

500VA (500W) 1000VA (1000W)

2000VA (2000W) 3000VA (3000W)

5000VA (5000W)

The Mini VR-G Series AC Automatic Voltage Stabiliser /

Conditioner range is based on similar power ratings to

F Models:

Offering a wider permissible input voltage window than F

models, they are specifically intended for extremely

challenging power environments where the incoming

utility mains supply may drop to as low as 80V.

220V to 240V

220V to 240V

Suitable for all electronic and

electrical load types, these

microprocessor controlled

Regulators are designed to

provide a clean and regulated

power supply, delivering many

years of reliable and maintenance

-free protection against the vagaries of the utility mains

supply.

220V / 230V / 240V

VR– F/G -500-5000-APRIL-2019

Side View | External & Internal 2 to 5 kVA Models

Front & Back View | 2 to 5 kVA VR Series Models

VR SERIES - FOR TODAY’S LOADS

Copyright 2019 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO. www.AshleyEdisonUK.com

Designed for Modern Needs

VR SERIES AC Voltage Stabilisers and Power Line

Conditioners are designed to stabilise and condition

the voltage when it fluctuates, up or down.

They are essential whenever reliable power is needed

or when normal operation of electrical or electronic

equipment is disrupted by voltage variations, sags or

spikes.

In general when suppliers of today’s modern electrical

and electronic equipment design their products they do

so knowing that most electrical utilities around the

world cannot provide or promise better than a ±5%

output voltage accuracy of nominal and as such they

design their equipment so it is able to operate

efficiently within this range.

VR SERIES Stabilisers and Conditioners are

specifically designed to meet the requirements of

today’s modern loads, being feature rich and virtually

maintenance free static mains control solutions.

They ensure the availability of a constant voltage at a

level that always meets the design requirements of the

load equipment, even for the most challenging of

power environments or site loads.

Internal View | Typical 5 kVA Model

Informative Front Display Panel

Mini VR SERIES AC Voltage Stabilisers and Power Line Conditioners

are available from -

Ashley-Edison (UK)

Founded in 1989, Ashley-Edison (UK) has evolved

to become one of the world’s leading specialist

providers of AC Voltage Stabilizers and associated

power line conditioning solutions.

Our Voltage Control solutions ensure our Customers –

from consumers and small businesses to the largest

of global organizations – can be certain that their vital

systems and manufacturing processes always receive

a voltage supply that is stable and clean – free from

the vagaries of the mains utility supply.

Want to learn more about us and the Clients we serve?

Check us out online at

https://www.ashleyedisonuk.com/at-your-service/

LED STATUS INDICATORS & ALARMS

Time Delay 10 second delay in the supply of power to the output on start-up and 10 seconds on the re-engagement of the output after an irregular event.

Normal All is Working Fine

Irregularities Fault Condition Present

Low Voltage Input Voltage 10V lower than permissible input Voltage Window. Output will be automatically disconnected. Audible Alarm will activate. On fault clearance Output will be automatically re-engaged.

High Voltage Input Voltage 10V greater than permissible input Voltage Window. Output will be automatically disconnected. Audible Alarm will activate. On fault clearance Output will be automatically re-engaged.

Overload Actual load current exceeds the model’s stated maximum rating. Audible Alarm for 60 seconds and then the Output will be automatically disconnected. On fault clearance system will require manual restart.

Over Temperature Internal core temperature of the primary transformer exceeds 120°c. Output will be automatically disconnected. Audible Alarm will activate. On fault clearance system will require manual restart.

DIGITAL METERING

Input Volt Meter Voltage level of the incoming utility mains supply

Output Volt Meter Output Voltage delivered by the system

Load Ammeter Power drawn by the connected load

MICROPRESSOR DIGITAL CONTROL