When using your VidVisonII glasses you must look slightlyabove or below the object you’re intending to recorddepending on distance from the object. We suggestpracticing a few times prior to attempting torecord an actual event.

I nd icat ion

Video Recording Trick

0’ 5’ 10’ 15’

Vid Vision IIHD Video Sunglasses

Quick Start Guide

1

2

3

Illuminates Followed By

Indicates Glasses are Recording

Indicates Recording has Stopped

One Flash

Blinking Light Indicates Charging

On

On

Fast Flashing Then O�

Fast Flashing Then O�

Press And Hold for 3 Seconds

Press

Press

Press

Press

Press

Connect to a PC or Mac USB Port

Press

Again

and

During USB Connection

(Not available for Mac OS)

Reset or Reconnect to USB

(Automatically Power o�)

(Automatically Power o�)

Power On

Take Video

Stop Recording

Take Photo

Power O�

Reset

Connect and Charge

PC Camera

Return to USB Connection

Battery Low

Memory Low

OnFully ChargedLED lightsCamera

CONTROLS

Overview of Controls Status Controls Indicator

SPECIFICATIONS Very Important Viewing Angle

Camera

Video Format

Photo Format

Memory Capacity

Battery Type

Input Power Rating

Charge Time

Video Recording Time

Operation System

Operating Temperature

Storage Temperature

Charging Temperature

Weight & Dimension

Lense

5.0 Mega pixels color CMOS / View angle: 64°

AVI (1280x720@30fps)

JPEG

16GB

Build-in 650mAh 3.7V Li-ion polymer battery

DC 5V 500mAh

3 hours for full charging by computer USB port

3 hours after fully charged

Windows XP / Windows 7 / Windows 8 / Mac OS

32-104ºF (0-40ºC)

32-104ºF (0-40ºC)

32-104ºF (0-40ºC)

55g / W161 x D164 x H45 (mm)

Polarized lense, UV400 protection

Warranty 6 Months

Vid Vision IIHD Video Sunglasses

Quick Start Guide

Connect the included USB cable directly to the USB port on yourcomputer. Make sure your computer is powered on. Connect theother end of the USB cable to your VidVisionII Glasses. A blinkingred light will indicate that the battery is charging. Allow to chargefor a minimum of 3 hours. (until the green indicator turns on)

Note: Please do not use a wall outlet or other devices to chargethe VidVisionII sunglasses product. It could result in a faulty chargeof the battery and void warranty.

Although VidVisionII glasses record in HD resolution the video quality is limitedto your computer’s resolution. To see your recording in HD you must play thevideo on a HD compatible device. For optimal performance save video andphotos to your computer before viewing.

O

TROUBLESHOOTING IN THE BOX

PERATIONS

1. Charge

Check the battery power. Recharge the battery if the power exhausted.Unable to Turn on VidVisionII Glasses

Most problems can be solved by resetting. Simply reset the VidVisionII. • Resetting will not erase the pictures, videos or other files stored in memory. • If the reset procedure does not work, charge the battery and try again.

Resetting

DO NOT return this product to the place of purchase. Call the VidVision support line for assistance.Customer Support Tech Support Line 877.380.3632

Check if the USB connection is fine. If the blue indicator turns on, Youmay have pressed and switched VidVision to Web Camera mode.Press button again to switch to mass storage device mode.

USB Mass Storage Device is Not Found inWindows and Mac

Please check if the memory is full. Delete or copy the old video files toyour computer hard disk.

Unable to Take Video

Check the battery power. Recharge the battery if the power exhausted.If auto shut-off on Video Recorder mode, check if the memory is full.Delete or copy the old video files to your computer hard disk.

Auto Shut-Off

After turning on your VidVisionII Glasses press and a blue light willilluminate indicating recording has started, hit again to stoprecording. If you do not see a blue light the glasses are NOT recording.

2. Take a Video

Connect VidVisionII to your computer. The device appears as a USB massstorage device in Windows Explorer. Open the HD VIDEO folder in thestorage device, copy or cut the video files to your local hard disk. Play thevideos with “Windows Media Player” or other supported media player.

4. Download & Play VideosUSB PORT

USB PORT

Press one time to take a photo. You can take photos durning videorecoding, or take photos during standby mode.

3. Take a PhotoThe Web camera function will require you to download a driver found inthe VidVisionII file that pops up when you plug the glasses into yourcomputer. 1. Connect VidVisionII to your computer. The USB mass storage device appears in Windows Explorer. Press to enter Web Camera mode. The blue indicator turns on. 2. Press again to return to USB mass storage device mode.

Connect your VidVisionII glasses to your computer then find and open the "updatetime" folder in the glasses memory. Follow the instructions to runthe "updatetime.exe" program to update the time on your VidVisionIIglasses.

Note: Video Recorder mode arenot usable in USB connection status. Web camera feature is not available for Mac computer.

5. Web Camera

6. Time Setting

USB PORT

USB Cable

Carrying Case

Carrying & Cleaning BagVidVision II

Quick Start Guide

VidVision IIHD Video Sunglasses