The Top Line Solventless Laminator by TECHNOLAMI

Type of application 4 rolls solvent-less lamination Type of adhesive bi-component adhesive Roll width 1.350 mm Web width min/max 500 / 1.300 mm Max coating width 1.300 mm Mechanical speed 450 m/min Working speed (*) 400 m/min Unwinder type shaftless Rewinder type shaftless Primary unwinder reel diam. max 1.000 mm Secondary unwinder reel diam. max 1.000 mm Rewinder reel diam. max 1.000 mm Primary unwinder reel weight max 1.200 kg Secondary unwinder reel weight max 1.200 kg Rewinder reel weight max 1.200 kg Primary unwinder core diam. (with optional adaptors) 76 mm (152 mm) Secondary unwinder core diam (with optional adaptors) 76 mm (152 mm) Rewinder core diam 152 mm Web pulling power on primary unwinder min/max 20 / 400 N Web pulling power on secondary unwinder min/max 20 / 400 N Web pulling power on rewinder min/max 20 / 400 N A/C motors 3 x 400 V – 50 Hz ± 10% Auxiliary 24 V Installed electric power 75 kW (indicative) Compressed air pressure (**) 700 kPa – (7 bar) dry not lubricated air Compressed air consumption 80 l/min Cooling water Water temperature 12 - 14 °C Water pressure 300 kPa – (3 bar) Water consumption 30 l/min Water hardness (CaCO3) 2,5 - 4,0 mg/l Execution not suitable for explosion atmosphere Noise level at 1,5 m 80 dBA (DIN 45635 1/27) Color standard white/red Layout drawing n. LO408003 Machine construction CE directives

(*) Working speed depends from type of material, adhesive and applied adhesive as well as the skillfulness of the operator (**) Compressed air delivery value shall be given upon placement of order and it will be expressed in cu.m/sec. under normal conditions: temperature 20°C, relative huimidity 65%, pressure 101300 Pa (1013 mbar), according to norms ISO R554 and ISO R558

Regis standard

Regis with dancing rolls

Regis with automatic rewinder

Regis with automatic winders and rewinder

Regis triplex with automatic rewinder

Technical data Technolami REGIS

Mechanical speed 450 m/min

Coating width available 600mm – 1300 mm (different width upon request)

Max roll diameter / weight 1000 mm / 1200 kg

Type of unwinders / rewinder Shaftless 3” and 6”

Alignement Automatic

Coating section frame thickness 50mm

First and second dosing cylinder, coating cylinder

and laminating cylinder type

Double wall inside spiraled

Coating nip roller Diam 145mm

Tension control at unwind and rewinder Load cells or dancing rollers

Opening gap of transfer roller 120mm

Taper tension at rewinder Yes

Adjusting aligning rollers after coating and before

lamination

Yes both included

Sleeve change for transfer roller Yes, on the machine

Aluminum idler rollers 18 by 120mm diam + 2 x 150 mm

Position of rewinder Outside the frame

Main technical features

• Unwinders up to 1000 mm diam. with servomotor

• Automatic centerting system

• Rewinder up to 1000 mm diam. with servo motor

• Four roll coating system

• Integrated thermoconditioning units

• In line sleeve change

Type of material Unwinder Unwinder Rewinder

Paper and laminates 20 –150 gr/m2 20 – 150 gr/m2 Laminated up to 200 gr/m2

BOPP neutral and

metallized 12 – 80 m 12 – 80 m Laminated up to 200 gr/m2

PET 8 – 40 m 8 – 40 m Laminated up to 200 gr/m2

PPP cast 20 – 150 m 20 – 150 m Laminated up to 200 gr/m2

LDPE 40 – 150 m 20 – 150 m Laminated up to 200 gr/m2

HDPE 30 – 130 m 15 – 130 m Laminated up to 200 gr/m2

PVC rigid 15 – 100 m 15 – 100 m Laminated up to 200 gr/m2

Nylon 20 – 130 m 15 – 120 m Laminated up to 200 gr/m2

BOPA 12 – 100 m 12 – 100 m Laminated up to 200 gr/m2

Aluminium 12 – 50 m 6,3 – 30 m Laminated up to 200 gr/m2

The range of materials to be treated is an example and is not binding

Range of materials suitable for lamination