stelladrive - kraft stelladrive mpd - spd - 1510 1 2 mpd-multi pump drive the mpd stelladrive is an

Download STELLADRIVE - Kraft STELLADRIVE MPD - SPD - 1510 1 2 MPD-MULTI PUMP DRIVE The MPD STELLADRIVE is an

If you can't read please download the document

Post on 26-Mar-2020

2 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • STELLADRIVE

    voguin TF clear overlay

  • STELLADRIVE

    MPD - SPD - 1510 21

    MPD-MULTI PUMP DRIVE The MPD STELLADRIVE is an innovative module that fits between an engine and a transmission to drive a multiple hydraulic pumps. The MPD mounts directly to the engine SAE housing and flywheel and uses an integrated flexible coupling to dampen torsional vibrations and compensate for misalignment. The output is a SAE dummy flywheel and housing that connects to any SAE driven equipment such as marine transmissions or PTOs like Transfluid’s HFO/HFR/HFF (oil/air actuated PTO), KPTO (fluid coupling) and PF-PTO (PTO with RBD rubber coupling). The units are self-contained with their own lubrication circuit. Foot mounted designs are available. In case of installation on the output side of devices having an elastic coupling, Transfluid requires full information about it in order to check the torsional compatibility of the system.

    Standard SAE input

    High flexibility allowing up to 8 pump pads

    Torsional coupling for vibration dampening

    Full engine power transmission through the output flywheel

    PTO kit for pulley and cardan shaft available

    Compact and easy to install

    Standard SAE output

    Oil actuated disconnectable PTO available

  • MPD - SPD - 1510 2

    L

    K

    N

    O

    Q

    H

    G

    J- Nr.8

    PP

    Oil Level

    A

    Oil Drain

    DCB

    Breather

    SAE B-2 BOLTS

    SAE C-2/4 BOLTS SAE B-2 BOLTS (with centering adapter ring) W

    X

    S

    V J6 TUPTUOTUPNI

    U

    FE

    T

    Depth 20

    Depth 20

    Depth 17

    Z

    Y

    SAE J620

    SAE J617

    SAE J620

    SAE J617

    P

    Breather

    M P

    A B

    RR G

    Oil DrainJ- Nr.4

    N

    O

    Q

    DC

    FE

    Oil Level

    1"- 11 BSP Heat exchanger supplied upon request

    W

    S

    UINPUT

    X

    V OUTPUT

    SAE C-2/4 BOLTS SAE B-2 BOLTS (with centering adapter ring)

    SAE C-2/4 BOLTS SAE B-2 BOLTS (with centering adapter ring)

    L

    T

    Depth 30

    Depth 25 (Size 18), 30 (Size 22)

    Depth 21 (Size 18), 34 (Size 22)

    Z

    Y

    SAE J620

    SAE J617

    SAE J620

    SAE J617

    SAE SAE V UTSRQPNMLFEDCBAEASEASerG

    ra d DIAN r SIZE

    SIZE

    SAE J617

    SAE J620

    SAE J617

    SAE J620

    SAE SAE V UTSRQPNMLFEDCBAEASEASerG

    ra d DIAN r EZIS

    SIZE

    *** ****** SAE J617

    SAE J620

    SAE J617

    SAE J620

    INPUT

    INPUT

    OUTPUT

    OUTPUT

    Total Heads

    kW

    Total Heads

    kW

    Single Head kW

    Single Head kW

    Ratio (n1:n2)

    Ratio (n1:n2)

    Weight w/o oil

    kg

    Weight w/o oil

    kg

    Oil Quantity

    l

    Oil Quantity

    l

    Max speed rpm

    Max speed rpm

    Max Input torque

    Nm

    Max Input torque

    Nm

    DIMENSIONS

    DIMENSIONS

    TECHNICAL DATA

    TECHNICAL DATA

    18

    18 22

    22

    MPD 14

    MPD 18-22

    * deduct 20 kg for each head ** @ max. speed *** not SAE standard

    14

    14 195

    350 530 35 2100 6300 400 175 0.95

    18 2200 3350 300 120 1.0 (0.88)

    12.5 2600 2000 175 120 1.0

    2 1

    3 11½” 11½”3 115

    B

    B

    A

    A

    97

    D

    D

    C

    C

    E

    E

    60

    F

    F

    60

    H

    J

    422

    N

    O

    620

    K

    M

    199.2

    P

    Q

    39.6

    S

    S

    68.1

    T

    T

    100

    U

    U

    72

    V

    V

    M10

    Dia.

    Dia.

    W

    W

    X

    X

    12

    Nr.

    Nr.

    M10

    Dia.

    Dia.

    8

    Nr.

    Nr.

    52

    Y

    Y

    12

    12

    Z

    Z

    14 195

    G

    G

    M14

    J

    L

    325

    O

    P

    284.5

    Q

    R

    673

    L

    N

    257 45 72.5

    282 70 97.514”

    1

    1 0

    1

    0 18” 127

    128

    71.5310 97.5

    134

    120

    130

    658

    772

    M16

    M18

    913

    1004

    1197

    1326

    456.5

    502

    315

    415

    343

    388.7

    25.4

    15.7

    53.5

    48.2

    79

    81

    100

    150

    M10

    M12

    12

    16

    M12

    M16

    8

    6

    18

    85 18

    14

    15 20

    343

    388.7

    485.2

    549.7

    14”

    14” 374 119 18” 363 108

    14” 111.5

    Dimensions are subject to alteration without notice

  • STELLADRIVE

    MPD - SPD - 1510 43

    SPD - DUAL PUMP DRIVE The SPD is an innovative modular pump drive designed to be mounted on industrial engines with SAE flywheels and housings. The input is a rugged Rubber Block Drive flywheel coupling. This elastic coupling absorbs radial and angular misalignments as well as dampens torsional vibrations. The SPD 11 output is a dual pad SAE A or B pump tower as well as SAE flywheel and flywheel housing. To allow for easy installation the pump tower can be mounted in 12 possible positions over 360 degrees. The output flywheel can accept transmissions, pumps, compressors and PTO’s.

    SPD 11

    SPD 11S

    SAE Connections

    Input elastic coupling Output dummy

    flywheel

    Input elastic coupling

    Output dummy flywheel

    SAE connection Single pad.

    Dual pad.

  • MPD - SPD - 1510 4

    A B DC

    L M

    N

    O

    Q

    V J6U

    S T

    W

    X

    TUPTUOTUPNI

    SAE B-2 BO LT S SAE 16/32-13T

    SAE B-2 BO LT S SAE 16/32-13T

    Depth 10

    10

    8 15

    SAE J620

    SAE J617

    SAE J620

    SAE J617

    SAE B-2 BO LT S SAE 16/32-13 T

    SAE J617

    SAE J620 SAE J617

    SAE J620

    SPD 11

    SPD 11S

    Input elastic coupling

    SAE connection

    DIMENSIONS

    DIMENSIONS

    DIMENSIONS

    DIMENSIONS

    TECHNICAL DATA

    TECHNICAL DATA

    11 4 5

    3 10” 7½

    11½ 4 10

    SIZE SAE J617

    SAE J617

    SAE J620

    SAE J620

    A

    218.5

    T

    71

    71

    T

    U

    100

    100

    U

    V

    72

    72

    V W X

    Weight kg

    Max speed rpm

    Head kW*

    Head kW*

    Ratios (n1:n2)

    Ratios (n1:n2)

    Max input torque Nm

    Max input torque Nm

    Dia. M10

    M10 Dia.

    Nr. 12

    12 Nr.

    Dia. M10

    M10 Dia.

    Nr. 8

    8 Nr.

    W X SIZE

    11

    11S

    11S

    SIZE

    SIZE A

    219

    B

    117

    D

    119

    L

    452

    M

    177

    N

    374

    O

    226

    Q

    290

    S

    54

    B

    111

    C

    9.5

    D

    98

    N SAE 3

    451

    SAE 4

    404

    SAE 5

    356 393 210 225.5 202 178 288 53.8

    SAE 5SAE 4SAE 3

    SAE 4 560

    560 SAE 4

    SAE 3 560

    860 SAE 3

    50

    85

    3000

    3000

    SAE 5 310 53

    110 0.93

    1.0

    M Q S INPUT OUTPUT L O

    Weight kg

    Max speed rpm

    4 10” 4 10”

    3 11½

    SAE J617

    SAE J617

    SAE J620

    SAE J620

    INPUT OUTPUT

    Dimensions are subject to alteration without notice* @ 3000 rpm

  • STELLADRIVE

    MPD - SPD - 1510 65

    L

    P

    PL

    Lube Oil Inlet

    A

    Z

    B

    H

    W

    C

    f 7

    DS

    V f 7

    X

    Through all SAE C-4 BO LT S

    SHAF T SAE C SPLINE 12/24-14 T

    M

    L M

    W

    A V

    B

    C

    f 8

    D

    S T

    H7

    E U

    P

    J

    Through all

    Lube Oil Inlet

    Oil drain

    Oil leve l

    SHAF T SAE C SPLINE 12/24-14 T

    P

    HUB SAE C SPLINE 12/24-14 T

    SAE C-4 BOLTS

    Clutch Oil Inlet

    DC B U

    E

    J

    V

    S

    A

    T

    SAE C-4 BOLTS

    SAE B 2 BOLTS Breather

    Through all

    SHAFT SAE B SPLINE 16/32-13 TSHAFT SAE B

    SPLINE 16/32-13 T

    H7

    Lube Oil Inlet

    Clutch Oi l Inlet

    Oil level

    Oil drain

    SAE C-4 BOLTS

    M P

    W

    L

    SAE SAE V UTSRQPNMLFEDCBAEASEASerG

    ra d DIAN r

    SAE SAE V UTSRQPNMLFEDCBAEASEASerG

    ra d DIAN r

    BB640

    Working pressure

    bar Max torque

    Nm

    Max torque Nm

    Working pressure

    barCC650

    For higher torque please apply TF

    5

    140

    5 12

    400155

    7

    195

    7 14

    465225

    9

    250

    9 16 18

    530 600295

    Head PTO for in-line and pulley mounting

    Air/oil actuated clutches for pump disconnection

    DIMENSIONS TECHNICAL DATA

Recommended

View more >