Page 1 of 1 Fastenal Product Standard REV-00

Date: June 18, 2012

PUMP.AO.51.SOP.C

Pump, Air Operated, 5:1 Stub Oil Ratio Pump w/ Composite Construction The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If

the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your

status as an approved vendor. Unless otherwise specified, all referenced consensus standards must be adhered to in their entirety.

Specification Requirements:

• Material: Aluminum, Zinc, Steel, Brass, Nitrile, Polyurethane Rubber

• Style: Air Operated

• Type: Oil Pump

• Contents: Pump with Air Motor, Suction Tube, Strainer, Bung Nut

• Application: For use with Oils to SAE 140 viscosity, ATF, Diesel, Kerosene, and

Soft Self Collapsing Grease

• Not Applicable With: Benzene, Acetone, Toluene, Xylene, Turpentine

• Pump Ratio: 5:1

• Outlet Size: ½” NPT

• Inlet Size: 1” NPT/ UNEF

• Flow Rate: 4 gpm

• Product Weight: 5.7288 lbs

• Notes: Compact Air operated 5:1 Ratio pump for dispensing Oils up to 5 times

the pressure as the Air Inlet. Double Acting Operation with discharge up to 4 GPM. Operates off

most small compressors with size as small as 0.08 cubic meter / minute (3 cfm). Commonly used

in workshops, farm, construction machinery or as a part of a Mobile oil system. Reciprocating

piston operated 2.83"dia. Air Motor. Non corroding air motor design (composite construction)

allows the pump to be used without an air line lubricator. Built-In pressure Relief valve prevents

both the pump & system against damage created by excessive pressure due to thermal expansion.

Stub pump design with dual oil inlet threads 1" NPT (F) & 1" UNEF (F), allowing the user to

make his own suction tube for any drum / tank depth. Ideal for use over long distances up to 50

meters. Comes complete with 2" Bung nut to fit directly onto Oil barrels.