psm 1 topics
TRANSCRIPT
-
8/8/2019 PSM 1 Topics
1/12
BKC TOPICS
NO TOPIC
1 Formulation of mathematical modeling for the design of maximum paper fiber recovery network
2 Targeting minimum paper fiber mass flowrate using property cascade analysis technique
3 Optimal water allocation networks in chlor-alkali plant
4 Optimum Inter-plant water network design with centralized regeneration system
5 A mathematical model for simultaneous reduction of energy and water in the process plant
6 Development of supported metal oxide catalyst for the transesterification and esterification reaction-(5 students)
7 Dynamic modeling of a Fluid Catalytic Cracking (FCC) unit
8 Dynamic modeling of a Reactive Distillation Column
9 Dynamic modeling of a Crude Distillation Unit (CDU)
10 Study on modeling and dynamics of a distillation column
11 Dynamic Modeling of Batch Reactor for Fischer esterification reaction of ethanol and acetic acid
12 Making wood composites using Rubber Latex as an Adhesive
13 Studying the Impact of Coupling Agent and Fiber Length on Wood Plastic Composites
14 Using Saw dust to make Wood Pellets for log burner
15 Use of Carbon Nano-tubes to enhance the physical and mechanical properties of the wood composites
16 Development of Bio-medical and Cosmetic Products from Keratin Protein
17
18 Development of drilling fluid system using CMC for HTHP application
19 Development of high quality barite as weighting agent for drilling fluid system application
20 Development of synthetic-based emulsion for drilling fluid in HTHP conditions
ercury remova rom pe roc em ca was ewa er us ng or a e ercury emova g or en anc ng wa er
-
8/8/2019 PSM 1 Topics
2/12
-
8/8/2019 PSM 1 Topics
3/12
41 Chemical studies of essential oils of some Malaysian plants
42 Production of biodiesel from rubber seed oil
43 Improvement of the cold flow property of biodiesel from palm oil
44 kinetic study of biodiesel production
45 Mathematical modelling of CSTR for waste water treatment
46 Design and development of photocatalytic reactor for dye removal from wastewater
47 Nanoparticle preparation and electrode fabrication for fuel cell (half cell characterization)
48 Polymer Nanocomposites based on Functionalized Carbon Nanotubes (2 Students)
49 Thermal Behaviour of Polymer Nanocomposites based on modified Nanoclay (2 students)
50 Modification of nanofiller to improve the final properties of polymer nanocomposites
51 Production and characterization of bamboo fibre reinforced biodegradable composite
52 Production and characterization of insulator materials from EFB
53 Production and characterization of plastics from algae
54 Production and characterization of polymer blend from LDPE and starch
55 Production of conductive polymer using carbon nano tube
57 To Study the Mechanical Characteristic of Heterogeneous coastal plastic waste
58 To Study Bonding Mechanism of Heterogeneous coastal plastic waste
59 To Study the effect of plastic additive to the characteristic of heterogeneous coastal plastic waste
60 To Study the Recovery of Heavy Metal From Spent IPA using Adsorption Process (2 students)
-
8/8/2019 PSM 1 Topics
4/12
61 Modeling and Simulation of Reactive Distillation for Biodiesel Production
62 Modeling and Simulation of Batch Distillation Process
63 Environment : A Study on the potential of reusability of spent IPA (industrial-linked) - 2 students
64
65
66 Synthesis and swelling behavior of rice husk based superabsorbent polymer composite
67 Synthesis and swelling behavior of Empty Fruit Bunch based superabsorbent polymer composite
68 Synthesis and swelling behavior of organoclay based superabsorbent polymer composite
69 Synthesis and swelling behavior of Empty Fruit Bunch/organoclay based superabsorbent polymer composite
70 Synthesis and swelling behavior of rice husk/organocaly based superabsorbent polymer composite
71 Solvent and Temperature Effect in Polymorphism Study of 2,6-Dihydroxybnzoic Acid Crystal
72 Solubility Study of 2,6-Dihydoxybenzoic Acid in Xylenes, Methanol and Acetonitrile Via HPLC Method.
73 Extraction Performance Study of Gaharu using Supercritical Extraction Method
74 Miscibility Study of Gaharu Essential Oil in Water and Organic Solvents
75
76 Synthesis of amorphous silica from cane leaf by hydrolysis pretreatment
77 Synthesis of amorphous silica from cane leaf by chemical extraction method
78 Troubleshooting of uneven heat transfer issue in waste heat boiler
79 Fluid dynamics of advanced gas dispersion impeller:Deep Hollow Blade Disc turbine
Environment / safety/ health : A Study on pattern recognization using Mahalanobis Distance (MD) for Local ExhaustVentilation system. - 2 students
The Molecular Dynamic Simulation of 2,6-Dihydroxybnzoic Acid Crystal in Ethanol, Methanol and Para-Xylene at 20oCUsing COMPASS Force Field.
-
8/8/2019 PSM 1 Topics
5/12
80 Fluid dynamics of flooding, loading and fully dispersed gas dispersion regime in stirred tank
81 Biopetrol synthesized from rubber seed oil by zeolite catalyst: Effect of ethanol in solvent extraction of rubber seed
82 Biopetrol synthesized from rubber seed oil by zeolite catalyst: Effect of hexane in solvent extraction of rubber seed
83
84 Biopetrol synthesized from rubber seed oil by zeolite catalyst: Effect of catalyst amount in cracking process.
85 Biopetrol synthesized from rubber seed oil by zeolite catalyst: Effect of operating temperature in cracking process
86 Development of cation exchange membrane chromatography for protein separation
87 Development of anion exchange membrane chromatography for protein separation
88 Mixed mode interaction membrane chromatography for whey protein fraction
89 Mixed matrix membrane from ethylene vinyl alcohol for mercury removal
90 Mixed matrix membrane from chitosan for mercury removal
91 Fluoride removal from groundwater using nanofiltration membrane
92 Fabrication of NF membrane using phase inversion method for colour removal
93 Dye removal by thin film composite (TFC) membrane produced through interfacial polymerisation technique
94 Study the effect of solvent in dissolving Polyethylene Terephthalate Glycol (PETG)
95 Mercury removal from wastewater by Electrocoagulation
96 Palm Oil based research (5 students)
97 Adsorption of Iron (II) and Cu(II) Using Saw Dusk
98 Batch Extraction of 1.3.7 Trymethyl Xanthine from KKM 22 Cocoa Seeds
99
100 Recycling of OPA for Zeolites Production Using Hydrothermal Technique
Biopetrol synthesized from rubber seed oil by zeolite catalyst: Effect of supercritical CO2 in solvent extraction ofrubber seed
Extraction ofCaffeine from PBC 123 Cocoa Seeds Using Various Organic Solvents
-
8/8/2019 PSM 1 Topics
6/12
101 Reduction of Iron (II) and Zn(II) Using Rice Husk
102 Characterization and modification of Castor bean oil extracted from the newly Malaysian produced castor beans
103 Identify ,characterize emulsifiers from natural resources and as termite control
104 Composite from palm tree and waste rubber.
-
8/8/2019 PSM 1 Topics
7/12
BKB TOPICS
NO TOPIC
1
2 Enhancement of biocellulose production in mixed medium culture.
3 Application of different mode of operations in biocellulose production.
4 Optimizing immunoglobulin production stimulating factors in the production of monoclonal antibody against CAH.
5
6
7 Acetic acid production from banana stem waste
8 Biological delignification of Oil Palm Trunk: Optimization
9
10
11
12 Characterization and Production of An Anti-Fungal Extract From Lempuyang Ginger
13 Formulation and Production of A Papain Whitening Face Soap From Papaya
14 Purification and Characterization of A Papain Enzyme From Papaya
15 Design bioreactor for bacterial cellulose production
16 Scale up biocomposite production from bacterial cellulose/starch -2 students
17 Optimization of bacterial cellulose synthesis by Acetobacter xylinum Sp using RSM
18
Utilization of natural sources as a medium for biocellulose production by usingAcetobacter Xylinum.
Production of-carotene using microalgae effect of medium composition.
Production of-carotene using microalgae effect of CO2
concentration
The pharmaceutical potential of oleaginous algae for arachidonic acid production
Production of glycolic acid isolated from natural sources as a therapeutic skin corrector
Purification of fructosyltransferase (FTase) from selected micro fungi to enhance fructooligosaccharides productionas a food additive
Production study of microbial tannase fromAspergillus sp. with potential use in food industry
-
8/8/2019 PSM 1 Topics
8/12
19
20
21 Studies on the optimization of sawdust species and particle size on xylose production
22
23
24 Analytical quantification of protein denaturation in spray drying
25 Biodiesel production from forest seed oil
26
27
28
29 Quantification of therapeutic proteins using electrospinning engineering by nanofiber fabrication
30
31
32 Optimization and scale up of fermentation for PHB Biopolymer using oil palm fronds juice as medium component
33 Production of microalgae biomass and lipids in photobioreactor
34 Production of methane from poultry manure
35 Optimization of red pigment by monascus species (solid state fermentation)
Potato peel extracts as Bacillus sp. substrates for the production of extracellular protease enzyme
Cultivating conditions influence invertase production byAspergillus sp. in submerged culture
Optimization of Collocalia Fuciphaga pretreatment for enzymatic hydrolysis using response surface methodology.
Production and separation of glucose from cellulose hydrolysates using membrane reactor: Effect oftransmembrane pressure and cross flow velocity.
Optimization of extraction parameters of total phenolic compounds from Cosmos caudatus
Effect of different type of solvent on extraction of phenolic compounds from Cosmos caudatus
Antioxidant activity of ethanolic extracts of some Malaysian herbs (student will select several herbs based onliterature review)
Optimisation of image pixel conditions for the detection of cancerous conditions for breast cancer patients usingultrasound images
Designing a Good Manufacturing Practices (GMP) certified manufacturing unit for pharmaceutical, food and halalproducts in Gambang
-
8/8/2019 PSM 1 Topics
9/12
36 Optimization of extraction process of monascus pigment
37 Evaluation of a molecularly imprinted polymer for racemic product separation
38 Nanofiller blended polyvinyl alcohol membranes for dehydration of bioethanol azeotrope
39 Optimization of two step karanja biodiesel synthesis under ultrasonic assist
40 Optimization of butanol production from POME by c.acetobutylicum
41 Optimization of butanol production from POME by c.beijerinckii
42
43 Kinetic evaluation of palm oil mill effluent (POME) with membrane anaerobic system (MAS)
44 Kinetic evaluation of sewage sludge treatment by membrane anaerobic system (MAS)
Production of Omega 3 fatty acid from microalgae: Effect of CO2and light intensity
-
8/8/2019 PSM 1 Topics
10/12
-
8/8/2019 PSM 1 Topics
11/12
NO TOPIC
1 The study of heat and mass transfer for sheel and tube heat exchanger
2 The study of heat and mass transfer for plate heat exchanger
3 A study of hybrid induction heating for distillation process
4
5
6 Production of Electric using Pyrolysis Exhaust Gases
7 Sol-gel Pyrolysis Process using Palm Oil Stems
8
9 Study on Wax deposition of heavy crude oil in pipelines
10 Enhancement of flow in pipeline transportation for crude oil emulsions
11
12 Evaluation of the effectiveness parameters on gas dehydration plant
13 Investigating the effect of magnetic force on the flow behavior in pipelines.
14
15 Improving the water flow in pipelines using floating technique.
16 Improving the gas oil flow in pipelines using floating technique.
17
18
19
20
21 A Review Study on Typical Problems Industrial Gas Metering (Rotary) in Malaysia
22 A Review Study on Typical Problems Industrial Gas Metering (Turbine) in Malaysia
23 New formulation of Non- Sulphur based ordorant for Natural Gas Pipeline
24 Gas flow network analysis in Shah Alam (Cox Method)
Preparation and characterization of metal-loaded titania in the photoreduction ofCO
2
Synthesis of ZnS nanostructures deposited on low-cost material as an applicationof photoreduction of CO
2
The Solubility of CO2 in Water at High Pressure and Different Temperature
Production of methane gas from palm oil mill effluent (POME) by membraneanaerobic systems (MAS)
Investigating the effect of gas flow rate on the drag reduction performance in
three phase flow system.
Investigating the effect of gas flow rate on the drag reduction performance in gasoil solid- gas flow system.
To study the effect of different methods dope solution preparation ondevelopment of Polyethersulfone MMMs for O
2/N
2separation.
Comparison between polymeric membrane with mixed matrix membrane on theirperformance for O
2/N
2separation.
The effect of difference coupling agent on zeolite modification for development ofPolyethersulfone MMMs.
-
8/8/2019 PSM 1 Topics
12/12
25 Gas flow network analysis in Putra Jaya (Cox Method)
26
27
28 Production of PDMS-PVDF TFC membrane for biogas purification.
29 Production of PEG-PVDF TFC membrane for biogas purification.
30 Modified PVDF membrane for biogas purification.
31
32
33
34
35
36 Effect of pressure on flammability limits of Acetylene
37 LPG Storage Design
38 CFD Application in Designing Perwaja Steel's Furnace System
39 CFD Application in Designing Perwaja Steel's Furnace System
40 Pyrolysis System Design (2 students)
Sustainability Approach in Modeling and Improvement of Pre-Treatment Unit inGas Processing Plant
Sustainability Approach in Modeling and Improvement of Acid Gas Removal Unit inGas Processing Plant
Effect of different mesostructured material based on silica as cobalt supports forFischer-Tropsch synthesis (MCM-41,Sba-15)
Effect of ZrO2
promotion on the structure and performance of SBA-15 supported
cobalt catalyst for Fischer-Tropsch synthesis(ZrO2,Zn)
Fischer-Tropsch synthesis of hydrocarbon over mesoporous Co/SBA-15 catalyst:influence of cobalt and zinc precursors loading
Effect CO2
gas on flammablility limits of LPG
Effect CO2
gas on flammablility limits of NG