precision exit devices - mayflower sales - your … conversion kits 38 component assemblies apex...

PRECISION EXIT DEVICES

PRICE LIST 63PHIEffective: January 6, 2014

2 Stanley Security Solutions, Inc. • www.stanleysecurity.com • Phone: (855) 365-2407 • Fax: (877) 835-1030

GENERAL INFORMATION

Terms and Conditions 3

Quoting and Ordering 5

Warranty 8

Returned Materials Authorization (RMA) 9

Returned Goods Authorization (RGA) 10

Fulfillment Issues 10

How to Order/Finishes/General Information 11

Forms 12

Special Weights 39

2000 APEX SERIES WIDE STILE DEVICES, TRIMS & OPTIONS

Rim Devices 14

Surface Vertical Rod Devices 15

Mortise Devices 16

Wood Door Concealed Vertical Rod Devices 19

Concealed Vertical Rod Devices 20

2000 APEX SERIES NARROW STILE DEVICES, TRIMS & OPTIONS

Rim Devices 17

Concealed Vertical Rod Devices 18

Decorative Levers 21

5000 RELIANT SERIES RELIANT DEVICES, TRIMS & OPTIONS

Rim Devices 22


100, 200, 300 OLYMPIAN SERIES OLYMPIAN DEVICES, TRIMS & OPTIONS

Rim Devices 24


Mortise Devices 26

ARM-A-DOR®

Completed Product Assemblies 27

Optional Kits 27

Deadbolts 27

TRIMS - WIDE STILE, NARROW STILE, OLYMPIAN

Pull and Lever Trims 28

ELECTRICAL PRODUCTS

Door Position Monitoring Switch 32

Electric Mortise Lock 32

Exit Alarm Kits 32

Power Supplies, Control Module, Battery Backup 31

Power Transfers 32

ACCESSORIES

Dummy Touchbars, Mortise Lock, Fire Bolt Assembly, Transom Bracket, Tools, Cylinders 30

CONVERSION KITS

Cylinder Attachment Kits 38

Cylinder Dogging Kits 34

Electric Lock/Unlock Kits 32

ELR Conversion Kits 31

Monitoring Conversion Kits 31

Q Option Retrofit Kits 31

Shim Kits 34

Trim Conversion Kits 38

COMPONENT ASSEMBLIES

Apex Wide Stile 33

Apex Narrow Stile 35

Reliant 36

Olympian 37

MISCELLANEOUS

Accessories 30

Cylinders 30

Mortise Locks 30

Mullions and Fittings 29

Screws and Fasteners 11

Security Screws 11

Sex Bolts 11

Strikes 29

Contents

Price List 63PHI

3Stanley Security Solutions, Inc. • www.stanleysecurity.com • Phone: (855) 365-2407 • Fax: (877) 835-1030

The terms and conditions contained herein shall govern the sale of all Stanley products located in the Stanley price catalog and/or offered for sale by Stanley Security Solutions, Inc., except for those products as set forth under separate Stanley Value Added Reseller Agreements. The acceptance of any order is expressly made conditional upon your assent to these Terms and Conditions of Sale.

PRICES: Stanley reserves the right, in its sole discretion, to change or amend its price list (including, but not limited to, adding or removing Products from the price list), and standard terms and conditions of sale as contained in its catalogs, price list or published sales policies, without incurring any liability whatsoever to its Customer or others. All orders will be filled at the Stanley List Price in effect at the time of order placement. All prices are subject to change without notice and are not guaranteed.

TAXES: List prices do not include federal, state or local taxes.

ORDERS: No order for Products shall be deemed to have been accepted by Stanley until written notice of its acceptance is received by the Customer from Stanley via an order acknowledgement. Stanley reserves the right, in its sole discretion, to decline to accept any order. Purchase Orders will bind Stanley only to the extent accepted by Stanley’s written confirmation or delivery.

Stanley will attempt to fill orders in the order in which they are received, subject to prior orders. However, Stanley reserves the right to allocate orders or fill an order or orders ahead of prior orders, if, in its judgment, the facts warrant such a change.

Any additional provisions in a Purchase Order, including any pre-printed terms, shall be void and not binding on Stanley, unless expressly accepted by Stanley. For greater certainty, the acceptance by Stanley of a Purchase Order shall not be deemed acceptance of the additional terms of such Purchase Order. Stanley will accept orders via phone, email, fax or courier. Stanley will send out an order acknowledgement for all orders received via email, phone or fax.

Note: Receipt or possession of this price catalog does not grant approval to quote or purchase Stanley products. Please contact your Stanley Sales Representative for further details.

KEYING SYSTEM ORDERS: All orders of keying systems specifying delayed fulfillment must be fulfilled within twelve (12) months of the order date. Said request for fulfillment must include complete keying instructions for the order to be acknowledged with an estimated delivery date. Failure to properly request fulfillment of the order within twelve (12) months of the order date will make the order void and nonrefundable.

SPECIAL ORDERS: Any modification to a standard product configuration is considered a special order. No credits will be issued for returned special orders unless authorized by Stanley Customer Service.

INCOMPLETE ORDERS: An incomplete order is one that is not fully specified according to the appropriate nomenclature required for that product. Any incomplete order will not be entered and will be referred to the appropriate Stanley Sales Representative for resolution.

SAMPLES: Please contact your local Stanley Sales Representative for sample requests.

MINIMUM CHARGE: The expense of handling an order necessitates a minimum charge of $50.00 net per invoice.

CREDIT LIMITS: Stanley’s policy is to extend Net 30-day terms/open account combined with a credit line based on financial capacity. For all accounts Stanley requires a Credit Application and Sales Tax Exempt Certificate (if applicable). Stanley evaluates traditional sources of credit information: D&B, trade and bank references, financial information, and business plans. The supply of credit herein shall be at the discretion of Stanley. If available information and/or financial circumstances will not support open accounts terms, Stanley offers Cash in Advance and Credit Card (MasterCard or VISA) terms. Stanley performs periodic reviews of credit lines and terms of payment and may request updated financial information.

Stanley reserves the right to withhold delivery of Product if Customer does not meet Stanley’s credit requirements for the amount of Product ordered, or the amount of Product which remains unpaid (whether or not overdue) exceeds the limit established by Stanley for Customer. Customer shall provide, at Stanley’s request, an acceptable letter of credit or guarantee or security in a form and amount determined by Stanley.

If Customer shall become overdue on its account or otherwise defaults in any payment to Stanley or if its financial condition shall at any time appear inadequate to warranty further shipment on an open account basis, Stanley shall have the right, without liability, to refuse to accept any or all orders, to cancel any and all orders, to delay shipments, or to require advance payment before accepting or shipping any orders. All orders and all shipments are subject to approval by the Stanley Credit Department.

PAYMENT TERMS: Stanley standard payment terms are 2% 15, net 30 days from date of invoice.

Stanley shall be entitled to charge and Customer shall pay interest on overdue invoices at the rate of two percent (2%) per month calculated from the date of the invoice to the date of payment, including any attorney fees incurred by Stanley resulting from the collection of such overdue payment. Customer shall pay all sums owing to Stanley without any deduction or abatement and Customer shall have no right of set-off.In the event that Customer disputes any portion of the payment due, Customer shall be obligated to pay the balance which is not the subject of dispute.

Without limiting any other rights it may have under these terms of sale and applicable law, all of Stanley’s obligations under this Agreement, including obligations of supply, or any Purchase Order, can be suspended or cancelled should Customer be delinquent in making payment for previously shipped Products.

INTERNATIONAL SALES: International Resellers located outside of the United States of America who place orders are subject to and must pay by (1) Cash in Advance, (2) Confirmed Irrevocable Letter of Credit, (3) Standby Letter of Credit.

All international shipments shall be FCA (Incoterms 2010) from Stanley’s facility in Indianapolis, Indiana USA. Stanley shall be deemed to have

TERMS AND CONDITIONS OF SALE

Price List 63PHI


delivered all Products and related goods when such are put in the custody of a carrier at Stanley’s plant or warehouse above, at which time all title and risk of loss or damage shall pass to Customer.

SHIPPING/FREIGHT: All Products shall be shipped FOB Origin domestic or FCA International (INCOTERMS 2010) from Stanley’s facility in Indianapolis, Indiana USA. Stanley shall be deemed to have delivered all Products and related goods when such are put in the custody of a carrier at Stanley’s plant or warehouse above, at which time all title, risk of loss or damage shall pass to Customer. All shipments will be made in accordance with the preferred routing, carrier assignments, and operational guidelines of Stanley. Customer shall bear all costs of freight, insurance and associated costs and shall make all arrangements for same.

Single or combined shipments including Stanley lock sets, exit devices, hinges and door closers will be considered for free freight with orders at or above $5000 net (product combination must be on same purchase order).

Hinge only orders will be considered for free freight with orders at or above $750 net.

These freight terms apply only to a single destination within the contiguous United States.

Should a shipment qualify for one of Stanley’s free freight programs, the Products shall be shipped FOB Origin domestic (with exception to prepaid freight) or FCA International (INCOTERMS 2010) (with exception to prepaid freight) from Stanley’s facility in Indianapolis, Indiana USA.

DELIVERY: Orders shall be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Manufacturing lead time will begin once all information is received to process an order. Delivery dates given by Stanley as part of order acknowledgment for accepted orders for Products or related goods will be honored by Stanley on a best effort basis. Shipping dates shown on order acknowledgments are based upon Stanley’s estimate and cannot be guaranteed. Stanley will not be liable for any loss or damage resulting from delay in filling orders, including any direct or consequential loss or damage. Stanley reserves the right to make partial shipments unless the order specifies otherwise.

CHANGES/CANCELLATIONS: After orders are entered for manufacturing, changes or cancellations cannot be accepted without Stanley written permission, and may be subject to a change or cancellation charge equivalent to 30% of the purchase price.

Orders for special and/or custom designed goods not immediately saleable to another customer are not changeable, cancelable, or returnable.

RETURNED GOODS: Stanley Customer Service MUST authorize all returns. All goods must be returned in original packaging and be in resalable condition except for warranty returns. Use fax number 888-214-1918 for returned goods authorization only. Only goods with an invoice date of less than one (1) year will be considered for a Return Goods Authorization (RGA). All material returned to Stanley, regardless of the reason, must have a correct RGA number applied to the outside

of the shipping carton. A restocking charge of 30% of the purchase price will be applied to the Customer’s account except for warranty returns. Transportation charges of returned goods must be prepaid by Customer. All goods must be returned within sixty (60) calendar days of RGA issue date. All goods must be returned in original packaging and be in resalable condition except for warranty returns. Product not returned in salable condition or after sixty (60) days of the RGA issue date is subject to disposal by Stanley with no credit issued. RGA requests are initiated by an e-mail to: [email protected].

Stanley cannot authorize the return of discontinued product. Under no circumstances will special order items be accepted for return, unless covered by warranty.

EXPORT REGULATIONS: Customer agrees to conform to, and abide by, the export laws and regulations of the US, including, but not limited to, the Export Administration Act of 1979 as amended and its implementing regulations. Diversion contrary to US laws and regulations is prohibited.

MASTERKEYING: Stanley Masterkey Code and Masterkey Service Policy can be found at www.bestaccess.com.

LIMITED WARRANTY: The terms and conditions outlined above are subject to Stanley’s Limited Warranty, which is included in the Stanley Price Catalog and is incorporated herein by reference. Upon return of a defective product, Stanley shall either repair or replace the product, in its sole discretion, in accordance with our standard warranty

EXCEPT AS SET FORTH HEREIN, STANLEY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, AND BUYER ACKNOWLEDGES THAT NO REPRESENTATIONS, WARRANTIES, PROMISES OR STATEMENTS HAVE BEEN MADE BY STANLEY, WITH RESPECT TO THIS PRODUCT, OR ANY PART OR PORTION THEREOF. IN ADDITION, STANLEY MAKES NO WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ANY PART OR PORTION THEREOF, FOR ANY PURPOSE, NOR ANY WARRANTY WHICH EXTENDS BEYOND THE DESCRIPTION ON THE FACE HEREOF. STANLEY SHALL NOT, IN ANY EVENT, BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES SUFFERED BY BUYER OR ANYONE CLAIMING BY, THROUGH OR UNDER BUYER, AS A RESULT OF THE CONDITION OF THIS PRODUCT, OR ANY PART OR PORTION THEREOF, AND THERE ARE NO ORAL OR WRITTEN UNDERTAKINGS OR AGREEMENTS OF ANY TYPE PROVIDED BY STANLEY EXCEPT AS EXPRESSLY SET FORTH HEREIN. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR PROHIBIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY IN YOUR STATE.

GOVERNING LAW: These Terms and Conditions of Sale and any subsequent sales agreements between Stanley and Customer shall be construed in accordance with the laws of the State of Indiana. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement.

TERMS AND CONDITIONS OF SALE (continued)

Price List 63PHI


Price quotations are based on one (1) shipment to one (1) location, and are valid as identified in the quote but in no case longer than one year from the date of the quote. All exceptions will be evaluated on an individual basis.

All quotation requests will be provided by the Stanley Representative where the project is located.

QUOTING PROCESS AND PROCEDURES: The following information is necessary to secure a price quotation from Stanley.

• Distributor Name• Distributor Location• Distributor Contact Name & Phone Number• Distributor e-mail contact• Project Name• Project Location• Bid Date• Architects Name, Phone Number, and Architects Location• Specification Writer Name, Phone Number and Location• Competitive Influence / Specification• List of materials to be quoted

Every attempt will be made by Stanley to provide the price quotation in a timely manner. Upon completion, you will receive a copy of the quotation which will also include a valid quotation number. Once the project is secured, a copy of the quotation must accompany your purchase order and be forwarded to Stanley Customer Service Department in Indianapolis for processing.

NON-STANDARD PRODUCT REQUEST: Please contact your Stanley Representative to complete a Non-Standard Product Request Form. All requests should be submitted to the following email address:

Email: [email protected]

Upon receipt of a special order request, Stanley will review the configuration and determine if Stanley is capable of making the special order product and will provide a response to the customer. If Stanley is able to make the special order product, Stanley will provide a specific sku/configuration to the customer for the special order product. This sku/configuration must be identified on all Purchase Orders. In addition, the Purchase Order must be marked as a “Special Order”.

ORDERING: The following information is required for Stanley to successfully process any order:

• Itemized Purchase Order (PO)• Stanley Approved Quote Please send all orders to [email protected] or by fax to 877-835-1030

NOTE: for detailed information on how to place an order for Stanley Best products as well as Stanley masterkey services please see the detailed section regarding “Stanley Best Ordering”.

ADD ON ORDERS FOR QUOTED PROJECTS: To place an add-on order from a quoted project the Distributor must include the original quote, PO number and/or Stanley’s original order number. Add-On orders will be accepted for a period one (1) year from the original order date.

Add-On orders received that are outside of the aforementioned period will be forwarded to the Stanley Representative for re-quote.

STOCKING ORDERS: All orders for stock replenishment should be marked as “Stock” and indicate a “Ship To” address that coincides with the stocking Distributor warehouse location.

INCOMPLETE ORDER PROCESS: All orders are screened upon receipt for complete information. If an order is received incomplete, Stanley Customer Service will make one (1) attempt to contact a Distributor directly for the missing requirements. If the information is not made available to Stanley at that time the order will be referred to the local Stanley Representative for resolution. All incomplete orders will be cancelled if not resolved after sixty (60) calendar days.

PRICE DISCREPANCY PROCESS: All entered orders are reviewed by Stanley Customer Service for accuracy and pricing consistency between the Distributor and Stanley. Any order determined by Stanley, in its sole and absolute discretion, to have a value greater than the Total Price shown on the Distributor purchase order will be held by Stanley for a Price Discrepancy. Stanley quotes are also reviewed to ensure that they are complete, approved, and match the PO. Due to pricing sensitivity, all price discrepancies must be resolved exclusively by your Stanley Representative. ORDER CANCELLATION/CHANGES: All requests for Order Cancellations and Changes (Quantity, Shipping, Finish, Function, etc) should be sent directly to Stanley Customer Service. Requests via phone will be accepted, but must be accompanied by a written request. Factory Order Number, PO Number, Account Info, and Detailed Changes must be clearly indicated. Change requests can be submitted via the following methods:

Email: [email protected] Fax: 1-877-835-1030

All order cancellations or changes will be subject to a cancellation fee as defined in Stanley’s Terms and Conditions of Sale.

PRODUCTION SCHEDULING AND “DO NOT SHIP BEFORE” REQUESTS: All orders are scheduled for production and shipping based on current production lead times and availability. Scheduling is completed only when an order is released from both credit and pricing review.

Exceptions to this policy are made only when the PO is clearly marked: “Do Not Ship Before” followed by the date. (Required Date, Expected Date, etc. do not apply) These orders will be scheduled to ship on or after the date listed.

Changes to “Do Not Ship Before” dates are required in writing and should be sent to: [email protected].

Be advised orders not clearly marked with a “Do Not Ship Before” designation will be payable within normal terms from the actual shipment date.

EXPEDITE REQUESTS:• Expedite requests will be reviewed and accommodated by Stanley based on production lead times and availability.• See the then current Stanley Quick Ship Program for details.

QUOTING & ORDERING

Price List 63PHI


WHOLESALE PURCHASE: Distributors are also free to utilize Stanley’s Authorized Wholesalers to purchase product. Stanley does not make any guarantee of availability or pricing for purchases from an Authorized Wholesaler and the discounts afforded to Distributor by Stanley shall not apply to purchases from an Authorized Wholesaler. The terms and conditions and price of product shall be mutually as agreed between Distributor and Wholesaler.

QUOTING & ORDERING (continued)

Price List 63PHI


For current pricing and ordering information associated with Stanley Best cylinders please see the Stanley Best Price Catalog.

STANLEY BEST CYLINDER AND PRECISION EXIT DEVICE ORDERS

Price List 63PHI

8 Stanley Security Solutions, Inc. • www.stanleysecurity.com • Phone: (855) 365-2407 • Fax: (877) 835-1030 Price List 63PHI


RMA REQUESTS: RMAs are utilized to cover the return of defective products still under warranty or products deemed repairable by Stanley’s Product Support Team. This process can take up to seven (7) days after product is received at Stanley’s factory. If a defective product presents a security risk, an advance replacement may be requested.

RMA PROCESS: Initiating an RMA request for all product lines can be handled in one of the following ways: 1) E-mail Stanley’s Technical Support Group at one of the following:

• [email protected]



2) Contact your Stanley Representative whom can enter an RMA request online.

3) Contact Stanley’s Product Support Team at:

• Phone: 1-800-392-5209

• Fax: 1-317-806-3557

The RMA Request Form must be completed entirely to process an RMA. The following information will be needed:

• End User Name • Sales Order Number

• Account Number • Item Number

• Contact Name • Item Quantity

• Phone Number • Description of the Problem

• Purchaser Order Number

Upon review and approval of the submitted RMA request, a claim number is logged and provided back to the requestor by a Stanley Product Support Team member:

• When an immediate replacement is required and it is not known whether the product is deemed defective or under warranty, a Purchase Order will be required to initiate a replacement (please see above fax number and e-mail address). In this case, an order number will be generated and forwarded to Distributor in conjunction with the RMA claim number.

• RMA claim number: Please use this number for all references and communications regarding the applicable situation to ensure a claim is easily identified.

Special Note: A Purchase Order (PO) will be required if the Product is:

1) Defective and not under warranty, or

2) An advance replacement is required without verification of whether the product is defective and under warranty.

Please send Purchase Orders to the following:

• Fax: 1-877-835-1030, or

• E-mail: [email protected]

• Defective product should be returned to the address below. The shipment must be marked with the approved RMA claim number to ensure prompt processing and attention. All shipping charges prepaid by customer.

Stanley Security Solutions, Inc.Stanley Mechanical Solutions DivisionAttn: Product Support Team6161 East 75th StreetIndianapolis, IN 46250

• When material is received at Stanley’s factory, Stanley will assess and determine the nature of the defect.

• Defective goods are replaced upon Stanley’s determination.

• Credit for material and freight is issued only if deemed appropriate by Stanley’s Product Support Team. If approved, credit is initiated and a credit memo is mailed to the Distributor within fifteen (15) business days.

RETURNED MATERIALS AUTHORIZATION (RMA)

September 2013

Price List 63PHI


RGA POLICY: Only goods with an invoice date of less than one (1) year will be considered for a Return Goods Authorization. All materials returned to Stanley for any reason (other than warranty), must have a correct Return Goods Authorization (RGA) number applied to the outside of the shipping carton. A thirty percent (30%) re-stocking charge (of the purchase price) will be applied to the Distributor’s account for orders returned due to customer error. Transportation charges of returned goods must be prepaid by the Distributor. All goods must be returned within sixty (60) calendar days of RGA issue date. All goods must be returned in original packaging and be in resalable condition. Product not returned in saleable condition is subject to disposal by Stanley with no credit issued. Commercial Hardware items that are special made to order items will not be returned under any circumstances.

RGA PROCESS (ALL PRODUCTS): RGA requests are utilized to cover all return goods for a Distributor with the exception of defective products. Requests can be initiated directly from you as Distributor or by your Stanley Representative. RGA requests are initiated by an e-mail to: [email protected]

1) The RGA request is reviewed, and if approved, logged into Stanley’s tracking system and a claim number is provided back to requestor.

2) Once a claim number is issued, this number should be noted on all references and communications concerning said RGA.

3) The RGA will be processed once material is received at Stanley’s factory provided it is received in its original packaging and is in saleable condition.

4) Credit is issued to the Distributor account and a credit memo is mailed to the Distributor.

Any quality Issues (missing parts, wrong parts, handing, finish, etc) should be submitted electronically to: [email protected] or your Local Stanley Representative.

Please reference your original Purchase Order (PO) Number, Factory Order Number, Distributor Account, Contact Information (E-mail/Fax), and include a detailed description of the issue.

1) ITEMS MISSING FROM A SHIPMENT: If you have signed your shipment short, Stanley Customer Service will promptly issue a No Charge replacement order for the missing products.

If the shipment was not signed short but after review, Stanley Customer Service determines (based on shipping weights, packing lists, etc) that the order was indeed shipped short, a No Charge replacement will be issued.

If Stanley Customer Service cannot verify a shipping error, an advance replacement order will be entered, charged, and expedited to the Distributor. The quality issue will be forwarded to the RGA-Credit Group for resolution.

If it is determined that the item was omitted from the order due to a Stanley order entry error, a change order will be entered and expedited for the missing products.

Please see Stanley’s price book for further detail.

2) WRONG ITEMS RECEIVED (parts, handing, function, finish, etc):Advanced replacements will be issued for any wrong items received. Such orders will be charged based on pricing/discounts from the original order. The issue will be forwarded to Stanley’s RGA-Credit Group for resolution.

Any quality issue that is determined to be either a Stanley order entry and/or manufacturing error will have an advanced replacement order entered and will be expedited. An RGA will be issued to return the incorrect products. No re-stock fee will apply for Stanley order entry and/or manufacturing errors.

RETURNED GOODS AUTHORIZATION (RGA) FULFILLMENT ISSUES

September 2013 September 2013

Price List 63PHI


How to Order / Finishes / General Information

11

Device Type Apex Exit Device Series Add Device Prefix:

Product Series:

C Quick ConnectDE Delayed Egress E Electric Lock/Unlock ELR Electric Latch

Retraction FL Fire Exit Hardware HC Hurricane Code LDS Latch Monitoring

Double Switch LS Latch Monitoring Switch Q Wireless Access

Management SystemTDS Touchbar Monitoring

Double SwitchTS Touchbar Monitoring

SwitchWTDS Weatherized Touchbar

Monitoring Double Switch

WTS Weatherized Touchbar Monitoring Switch

3R0TS2108CD × V4908AKNR × RHRB × 630 × S300 × 3′-0″× 8’-0″ × 1-3/4″ Device Model Trim Hand Finish Strike Door Size

DEVICE ONLY: List quantity, device model w/function, hand, finish, strike, and door size including thickness. Note: For greater exit device mounting heights, see extended bottom rods (pages 35, 36, 37 & 38)

HOW TO ORDER Function

FINISHES For standard finishes in each series, see individual product pages. For other finishes, consult factory. BHMA US DESCRIPTION

600* USP Primed for Paint 605 US3 Bright Brass, Clear Coated 606 US4 Satin Brass, Clear Coated 612 US10 Satin Bronze, Clear Coated 613 US10B Satin Bronze, Oxidized, Oil Rubbed 625 US26 Bright Chrome Plated 628 US28 Satin Aluminum, Clear Anodized 630 US32D Satin Stainless Steel 630AM Satin Stainless Steel with

UltraShield™ Antimicrobial coating 689* --- Aluminum Paint / Powder Coat 695* --- Dark Bronze Paint / Powder Coat

SPLIT FINISHES When split finish is specified, the finish listed first is for outside trim. To obtain proper list price, add “Device Only” price (see specific device page), to appropriate “Trim” price (pag. 29). *Mullion finishes 689 & 695 finishes for Reliant series exit devices.

DEVICES FOR DOOR WIDTHS Stock Size for 3'-0" or 4'-0" wide door is available for all series of devices. Stock Size for 2'-0" to 2'-6" wide door is also available for

Add Device Suffix: ALK Battery Operated Exit Alarm ALW Remote Power Exit AlarmBRL Braille Touchbar CD Cylinder Dogging DS Door Position Monitoring Switch LBR Less Bottom Rod Device LD Less Dogging SEC Security Screws SMK Shim Kit SNB Sex Nut and Bolt WALW Weatherized Remote Power Exit Alarm

Add Prefix: C Concealed Vertical Rod Trim M Mortise Trim R Retrofit Trim V Vandal Resistant Lever Trim (08 Function Only)

Specify: Grip Style (A, B, C) Lever Style (A, B, C, D),Knob (K) Decorative Levers (P) w/corresponding

number (see pg. 21 for more details)

Add Suffix: KNR (Knurled Lever or Grip)

Apex wide stile only. At customers request, 10 or more devices of any one door width will be cut at the factory free of charge. For factory cutting of less than 10 devices of any one size, add $21 list per device cutting charge.

DOOR THICKNESS Rim and Surface Vertical Rod exit device accommodates doors ranging from 1 3/4"– 2 1/4" Mortise and Concealed Vertical Rod exit devices accommodate 1 3/4" thick doors. For applications exceeding the door thickness referenced above, please consult Product Support. Additional charges will apply.

FASTENERS Furnished standard with machine screws and full thread wood/sheet metal screws. Specify Sex Nuts and Bolts “SNB” where recommended or required by the door manufacturer.

SEX NUTS & BOLTS (Not furnished standard) 1/4-20 Thread – When used with top & bottom surface vertical rod latches: (Part # 02399-91 x Finish).

10-24 Thread – When used with end cap bracket, active case and rod guides: (Part # 02408-91 x Finish). If Sex Nuts and Bolts are required, see individual device pages for quantity required and pricing. To order separately, specify “SNB” × Finish. List price $8 each.

SECURITY SCREWS All exposed screws will be Torx® pin tamper resistant machine screws. Specify “SEC” Security Screws. If Security Screws are specified see individual device pages for the price.

Price List 63PHI

UltraShield™ Antimicrobial finish coating option available to Apex Exit Devices & Trims. 630AM list price add $56.00 Exit Devices, $22.00 Trims


Order Form: _____________________________________ P.O. # ___________________________________________

Date __________________________________________ Ship To: _________________________________________

Sold To: ________________________________________ _________________________________________

_________________________________________

_________________________________________

Phone Number: __________________________________ Date Required: ___________________________________

Placed By: ______________________________________ Job Name: _______________________________________

Entered By: _____________________________________ Salesperson: _____________________________________

Shop Via: ________________________________________

ORDER FORM

Quantity Product Description Handling Finish Door Size

STANLEY SecurityAttn: Precision Hardware6161 East 75th Street Indianapolis, IN 46250

17679-S3 5/12

Price List 63PHI


RETURN ORDER REQUEST

❏ Return for Replacement ❏ Return for Credit

Date of Request:_________________________________

Original Order: __________________________________

Date of Request:_________________________________

Original P.O.: ____________________________________ ❏ Manufacturing Defect

Invoice #: ______________________________________ ❏ Warranty Evaluation

Customer Name: _________________________________ ❏ Missing Parts

Account Number: ________________________________ ❏ Wrong Matterials Received

Address: _______________________________________ ❏ Wrong Matterials Ordered

City: __________________________________________ ❏ Wrong Quantity

State: __________________________________________ ❏ Return Inventory

Contact Name: __________________________________ ❏ Other: _______________________________________

Email: _________________________________________

Phone: _________________________________________

❏ Ship Replacement Material to Address Above ❏ Ship Replacement Material to Address on Order

DETAILED DESCRIPTION OF DEFECT OR REASON FOR RETURN

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

________________________________________________________________________________________________________________

Please e-mail completed form to [email protected] or Fax to 1-888-214-1918

NATURE OF PROBLEM

Note: All returns shall be subject to Stanley’s current Terms of Sale and Warranty as outlined in Stanley’s price catalog.

RETURN MATERIAL

Line Item # Quantity Product Nomenclature Product Description

Price List 63PHI


• Devices for Retrofit Applications prefix Trim with the letter “R” (e.g. R4908A).

• Devices are priced less cylinders. If cylinder is required please see cylinders on pg. 30.

• Devices for 3’-0” door are furnished standard.• Devices for 2’-6” & 4’-0” doors are available at no extra charge.** See Stanley Hinges & Door Accessories price book for Wire

Harness product

• UltraShield™ Antimicrobial finish coating option available to Apex Exit Devices & Trims.

- 630AM list price for Exit Devices - 630AM list price for Trims

Options

Pull Trim:

Lever/Knob Trim:

TO ORDER:

NOTES:

PREFIX (ADD TO DEVICE #)C Pre-Terminated Quick Connect Plug **

DE Delayed Egress: REQUIRES PS160-6 Power Supply (page 31)

E Electric Lock/Unlock with Lock/Unlock monitoring (see above)

ELR Electric Latch Retraction: REQUIRES ELR150 Series Power Supply (pg. 32)

HC Hurricane Code Device LDS Latchbolt Monitoring Double Switch LS Latchbolt Monitoring Switch Q Wireless Access Management System

TDS Touchbar Monitoring Double Switch TS Touchbar Monitoring Switch

WTDS WeatherizedTouchbar Monitoring Double Switch WTS Weatherized Touchbar MonitoringSwitch

SUFFIX (ADD TO DEVICE #)ALK Exit Alarm: battery operated kit (9V battery included) ALW Exit Alarm: remote power kit (12 or 24 VDC) BRL Braille Touchbar

CD Cylinder Dogging: 1-1/4” Mortise Cylinder not included

DS Door Position Monitoring Switch LD Less Dogging SEC Security ScrewsSNB Sex Nut and Bolt (6 req'd) without TrimSNB Sex Nut and Bolt (2 req'd) without Trim

WALW Weatherized Exit Alarm: Remote power (24 VDC)

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 2101 × 170102 Exit only, dummy trim 2102 × 1702A03 Key retracts latchbolt 2103 × 1703A05 Key controls thumb piece 2105 × 1705A15 Thumb piece always active 2115 × 1715A

(Devices with 2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 2101 × 490102 Exit only, dummy trim 2102 × 4902A03 Key retracts latchbolt 2103 × 4903A08 Key controls lever/knob 2108 × 4908A08 Key controls lever 2108 × V4908A14 Lever/knob always active 2114 × 4914A10 Inside key controls lever/knob 2110 × 4908A

Outside key retracts latchbolt 2110 × V4908A10 Inside key controls lever/knob 2110 × 4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 21, 2101, 2102, 2103*,2105, 2108, 2114, 2115

*2103 Device × Cylinder Only Application includes Cylinder Attachment Kit “CA-03”

EElec. Device E2103 × 4908AElectric Lock/Unlock Outside Trim E2103 × V4908A

FL Fire Rated Hardware Specify prefix “FL” (e.g. FL2103) Dogging option NOT available

Specify: Device No. with options × Trim × Hand × Finish × Door Width, Height and Thickness.

SPLIT FINISHES: When split finish is specified, the finish listed first is for outside trim. To obtain proper list price, add “Device Only” price to appropriate “Trim” price.

3R0 – Apex Rim – Reversible, Wide Stile2100

Price List 63PHI

Add 158.00

ADDN/C

1,423

-

770

32 266 219 429 266 219 357 285

ADD 509 509 84

75

105 32 43 54 18

663

628606, 612 613, 630

605 625

1165 1343 1502

1300 1478 1644

1392 1570 1737

1211 1389 1547

1491 1669 1900

1595 1773 2006

1876 2050 2297

1,073 1,251 1,378

2127 2305 2538

Add 56.00Add 22.00



DE Delayed Egress: REQUIRES PS160-6 Power Supply (pg. 32)*

ELR Electric Latch Retraction: REQUIRES ELR150 Series Power Supply (pg 23)

HC Hurricane Code Device LS Latchbolt Monitoring Switch Q Wireless Access Management System


WTDS Weatherized Touchbar Monitoring Double Switch WTS Weatherized Touchbar Monitoring Switch



DS Door Position Monitoring Switch LBR Less Bottom Rod (no extra charge)LD Less Dogging SEC Security Screws

SNB • SNB Sex Nut and Bolt (10 req’d - not including rod guides) without Trim

SNB • SNB Sex Nut and Bolt (8 req’d - not including rod guides) LBR Device w/o Trim

SNB • SNB Sex Nut and Bolt (6 req’d - not including rod guides) with Trim

SNB • SNB Sex Nut and Bolt (4 req’d - not including rod guides) LBR Device with Trim

TMB Transom Bracket WALW Weatherized Exit Alarm: remote power (24 VDC)

TO ORDER:

NOTES:

Options

Pull Trim:

Lever/Knob Trim:


(Devices with 2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 2201 × 490102 Exit only, dummy trim 2202 × 4902A03 Key retracts latchbolt 2203 × 4903A08 Key controls lever/knob 2208 × 4908A08 Key controls lever 2208 × V4908A14 Lever/knob always active 2214 × 4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 22, 2201, 2202, 2203*,2205, 2208, 2214, 2215

* 2203 Device × Cylinder Only Application includes Cylinder Attachment Kit “CA-03”E Elec. Device (see above) E2203 × 4908A




- 630AM list price for Exit Devices - 630AM list price for Trims• Devices for Retrofit Applications prefix Trim with the letter “R”

(e.g. R4908A).


• Devices for 3’-0” door are furnished standard.• Devices for 2’-6” & 4’-0” doors are available at no extra charge.• Top Rod for 7’-0” high door is furnished standard.

• Top Rod for 8’-0” to 12’-0” high door is available at no extra charge. (See catalog for fire rating).

* Rod and Latch Guards provided by others** See Stanley Hinges & Door Accessories price book for Wire

Harness product


3R0 – Apex Surface Vertical Rod – Reversible, Wide Stile2200

Price List 63PHI

ADDN/C

1,423

770

32 219 429 266 219 357 285

ADD 509 509 84

75

105 -

32 43

90

72

54

36

52 663

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1638 1826 2002

1773 1961 2144

1865 2053 2237

1684 1872 2047

1964 2152 2400

2068 2256 2506

1546 1734 1878

2819 3007 3257

Add 158.00


Pull Trim:

Lever/Knob Trim:


DE Delayed Egress: REQUIRES PS160-6 Power Supply (pg. 32)

E Electric Lock/Unlock with Lock/Unlock monitoring (see above)


HC Hurricane Code Device LS Latchbolt Monitoring Switch





DS Door Position Monitoring Switch LD Less Dogging SEC Security ScrewsSNB Sex Nut and Bolt (6 req’d) without TrimSNB Sex Nut and Bolt (2 req’d) with Trim

WALW Weatherized Exit Alarm: remote power (24 VDC)

NOTES: • UltraShield™ Antimicrobial finish coating option available to Apex Exit Devices & Trims.

- 630AM list price for Exit Devices - 630AM list price for Trims


• Devices for 3’-0” door are furnished standard.• For mortise lock body ONLY see page 29. For 2’-6” & 4’-0” doors are available at no extra charge.** See Stanley Hinges & Door Accessories price book for Wire

Harness product

TO ORDER: Specify: Device No. with options × Trim × Hand × Finish × Door Width, Height and Thickness.

Options

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 2301 × 170102 Exit only, dummy trim 2302 × 1702A03 Key retracts latchbolt 2303 × 1703A05 Key controls thumb piece 2305 × M1705A15 Thumb piece always active 2315 × M1715A

(Devices with M2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 2301 × 490102 Exit only, dummy trim 2302 × 4902A03 Key retracts latchbolt 2303 × M4903A08 Key controls lever/knob 2308 × M4908A08 Key controls lever 2308 × VM4908A14 Lever/knob always active 2314 × M4914A10 Inside key controls lever/knob 2310 × M4908A

Outside key retracts latchbolt 2310 × VM4908A10 Inside key controls lever/knob 2310 × M4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 2301, 2302, 2303*,2305, 2308, 2314, 2315

E Elec. Device E2303 × M4908AElectric Lock/Unlock Outside Trim E2303 × VM4908A

FL Fire Rated Hardware Specify prefix “FL” (eg FL2303) Dogging option NOT available


3R0 – Apex Mortise - Handed, Wide Stile 2300

Price List 63PHI

ADDN/C

1,423

-

770

32 219 266 219 357 285

ADD 509 509 84

75

105 32 43 54 18 663

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1611 1800 1973

1746 1935 2115

1838 2027 2208

1657 1846 2018

1937 2126 2371

2041 2230 2477

2320 2510 2781

1519 1708 1849

2609 2798 3045

Add 158.00


Pull Trim:

Lever/Knob Trim:








DS Door Position Monitoring Switch LD Less Dogging SEC Security ScrewsSNB • SNB Sex Nut and Bolt (4 req’d) without Trim SNB • SNB Sex Nut and Bolt (2 req’d) with Trim


NOTES:

TO ORDER:

Options

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 2401 × 200102 Exit only, dummy trim 2402 × 2002C03 Key retracts latchbolt 2403 × 2003C

LEVER TRIM:01 Exit only, cover plate 2401 × 290102 Exit only, dummy trim 2402 × 2902A03 Key retracts latchbolt 2403 × 2903A08 Key controls lever 2408 × 2908A14 Lever always active 2414 × 2914A

DEVICE ONLY:

01, 02, 03, 08, 14 2401, 2402, 2403*,2408, 2414

* 2403 Device × Cylinder Only Application includes Cylinder Attachment Kit “NCA-03”.




- 630AM list price for Exit Devices - 630AM list price for Trims• Devices are priced less cylinders. If cylinder is required please

see cylinders on pg. 30.

• 2403 × 2903A Device uses Rim Cylinder, 2408 × 2908A Device uses Mortise Cylinder.

• Devices for 3’-0” door are furnished standard.• Devices for 4’-0” doors are available at no extra charge.** See Stanley Hinges & Door Accessories price book for Wire

Harness product


3R0 – Apex Rim - Non Handed, Narrow Stile 2400

Price List 63PHI

ADDN/C

1,423

770

266 219 357 285

ADD 509 509 84

75

105 32 43 36 18 663

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1280 1462 1626

1415 1597 1768

1326 1508 1671

1606 1788 2024

1710 1892 2130

1188 1370 1502

Add 158.00


Pull Trim:

NOTES:

TO ORDER:


- 630AM list price for Exit Devices - 630AM list price for Trims• Devices are priced less cylinders. If cylinder is required

please see cylinders on pg. 30.

• 2603 × 2903A Device uses Rim Cylinder, 2608 × 2908A Device uses Mortise Cylinder.

• Devices for 3’-0” door are furnished standard.• Devices for 2'-6" & 4’-0” doors are available at no extra

charge.• Top Rod for 6’-8” to 8’-0” high door is furnished standard.• Top Rod for 8’-0” to 10’-0” high door is available at no

extra charge. (See catalog for fire rating).

** See Stanley Hinges & Door Accessories price book for Wire Harness product


OuTSIDE FuNCTION DEVICE × TRImLEVER TRIM:01 Exit only, cover plate 2601 × 290102 Exit only, dummy trim 2602 × 2902A03 Key retracts latchbolt 2603 × 2903A08 Key controls lever 2608 × 2908A14 Lever always active 2614 × 2914A

DEVICE ONLY:

01, 02, 03, 08, 142601, 2602, 2603*,2608, 2614

*2603 Device × Cylinder Only Application includes Cylinder Attachment Kit “NCA-03”


Options








DS Door Position Monitoring Switch LBR Less Bottom Rod (no extra charge)LD Less Dogging SEC Security ScrewsSNB • SNB Sex Nut and Bolt (4 req’d) without Trim SNB • SNB Sex Nut and Bolt (2 req’d) with Trim



3R0 – Apex Concealed Vertical Rod - Non Handed, Narrow Stile 2600

Price List 63PHI

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1890 2082 2258

2170 2362 2611

2274 2466 2717

1752 1944 2089

ADD50950984

75

105 - 32 43 36 18 663

ADDN/C

1423

770

266219357285

Add 158.00


Pull Trim:

Lever/Knob Trim:

NOTES:

TO ORDER:



DEVICE ONLY:

01, 02, 03, 05, 08, 14, 152701, 2702, 2705,2708, 2714, 2715

EElec. Device E2703 × 4908AElectric Lock/Unlock Outside Trim E2703 × V4908A


Options




LS Latchbolt Monitoring Switch Q Wireless Access Management System





DS Door Position Monitoring Switch LBR Less Bottom Rod (no extra charge)LD Less Dogging SEC Security ScrewsSNB • SNB Sex Nut and Bolt (6 req’d) without Trim SNB • SNB Sex Nut and Bolt (2 req’d) with Trim




- 630AM list price for Exit Devices - 630AM list price for Trims• Devices for Retrofit Applications prefix Trim with the letter “R”

(e.g. R4908A).

• Devices are priced less cylinders. If cylinder is required please see cylinders on page 30.

• Devices for 3’-0” door are furnished standard.• Devices for 2’-6” & 4’-0” doors are available at no extra charge.• Top Rod for 6’-8” to 8’-0” high door is furnished standard.• Top Rod for 8’-1” to 10’-0” high door is available at no extra

charge. (See catalog for fire rating).



3R0 – Apex Wood Door Concealed Vertical Rod - Reversible, Wide Stile 2700

Price List 63PHI

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1952 2143 2327

2087 2278 2469

2179 2370 2562

1998 2189 2372

2278 2469 2725

2382 2573 2831

1860 2051 2203

3133 3324 3582

ADDN/C

1423

770

219429266219357285

ADD50950984

75

105 - 32 43 54 18 663

Add 158.00


Pull Trim:

Lever/Knob Trim:

Cast Plate:

NOTES:

TO ORDER:

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 2801 × 170102 Exit only, dummy trim 2802 × C1702A03 Key retracts latchbolt 2803 × C1703A05 Key controls thumb piece 2805 × C1705A15 Thumb piece always active 2815 × C1715A


CAST PLATE:03 Key Retracts Latch Bolt

2803 × C03(pull by others)

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 2801,2802,2803*,2805, 2808, 2814, 2810

*2803 Device x Cylinder Only Application requires C03 Trim, see page 20

EElec. Device E2803 x 4908AElectric Lock/Unlock Outside Trim E2803 x V4908A


Options




HC Hurricane Code Device LS Latchbolt Monitoring Switch





DS Door Position Monitoring Switch LBR Less Bottom Rod (no extra charge)LD Less Dogging SEC Security ScrewsSNB • SNB Sex Nut and Bolt (6 req’d) without TrimSNB • SNB Sex Nut and Bolt (2 req’d) with Trim




- 630AM list price for Exit Devices - 630AM list price for Trims• Devices are priced less cylinders. If cylinder is required please

see cylinders on pg. 30.• Devices for 3’-0” door are furnished standard.

• Devices for 2’-6” & 4’-0” doors are available at no extra charge.• Top Rod for 6’-8” to 8’-0” high door is furnished standard.• Top Rod for 8’-1” to 10’-0” high door is available at no extra




3R0 – Apex Concealed Vertical Rod - Reversible, Wide Stile 2800

Price List 63PHI

Add 56.00Add 22.00

628606, 612 613, 630

605 625

1727 1916 2091

1862 2051 2233

1954 2143 2326

1773 1962 2136

2053 2242 2489

2157 2346 2595

1809 1998 2141

1635 1824 1967

2908 3097 3346

ADDN/C

1423

770

32219266219357285

ADD50950984

75

105 - 32 43 54 18 663

Add 158.00


TO ORDER:

LEVER STYLES

LEVER STYLES

12

17

51

52

54

60

62

65

66

68

69

70

75

77

79

83

87

89

90

91

*92 Lever option also available

Specify: Device No. with options x Trim x Hand x Finish x Door Width, Height and Thickness.

Decorative Levers list price 2900/4900Series Trims

Price List 63PHI

LIST PRICE ADD

LIST PRICE ADD

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

88

$88 PER TRIm (ONE LEVER)


Options

Plate

Pull Trim

Lever Trim

PREFIX (ADD TO DEVICE #)TDS Touchbar Monitoring Double Switch TS Touchbar Monitoring Switch


SUFFIX (ADD TO DEVICE #)ALK Exit Alarm: battery operated kit (9V battery included) ALW Exit Alarm: remote power kit (12 or 24 VDC)


LD Less Dogging SNB • SNB Sex Nut and Bolt (4 req’d) without TrimSNB • SNB Sex Nut and Bolt (2 req’d) with Trim

WALW Weatherized Exit Alarm: remote power (12 or 24 VDC)

NOTES:

TO ORDER:

• Weatherized Exit Alarm: remote power (24 VDC) • Devices for 4’-0” doors are available at no extra change.• 603 and 703 Trims use a Rim Cylinder, 808A Trims use a Mortise Cylinder.

OuTSIDE FuNCTION DEVICE × TRIm TRIm ONLYPLATE:01 Exit only, cover plate 5101 × 501 501

PULL TRIM:02 Exit only, dummy trim 5102 × 602 60203 Key retracts latchbolt 5103 × 603 60302 Exit only, dummy trim 5102 × 702A 702A03 Key retracts latchbolt 5103 × 703A 703A

LEVER TRIM:08 Key controls lever 5108 × 808A 808A14 Lever always active 5114 × 814A 814A

DEVICE ONLY:

01, 02, 03, 08, 14 5101, 5102, 5103*,

- 5108, 5114




• Devices for 3’-0” door are furnished standard.


4R0 – Reliant Rim - Non Handed 5100

Price List 63PHI

ADD266219357285

ADD509509

75

32 36 18 663

689 695

457

472

516

646

413

689 695

44

59

103

233

-

Add 158.00


Plate

Pull Trim

Lever Trim

PREFIX (ADD TO DEVICE #)TDS Touchbar Monitoring Double Switch TS Touchbar Monitoring Switch


SUFFIX (ADD TO DEVICE #)ALK Exit Alarm: battery operated kit (9V battery included) ALW Exit Alarm: remote power kit (12 or 24 VDC)


LBR Less Bottom Rod (no extra charge)

LD Less Dogging


SNB • SNB Sex Nut and Bolt (6 req’d - not including rod guides) LBR Device w/o Trim.




NOTES:

TO ORDER:


• Devices for 3’-0” door are furnished standard.• Devices for 4’-0” doors are available at no extra charge.• 603 and 703 Trims use a Rim Cylinder, 808A Trims use a

Mortise Cylinder• Top Rod for 7’-0” high door is furnished standard.• Top Rod for 8’-0” to 10’-0” high door is available at no extra



OuTSIDE FuNCTION DEVICE × TRIm TRIm ONLYPLATE:01 Exit only, cover plate 5201 × 501 501

PULL TRIM:02 Exit only, dummy trim 5202 × 602 60203 Key retracts latchbolt 5203 × 603 60302 Exit only, dummy trim 5202 × 702A 702A03 Key retracts latchbolt 5203 × 703A 703A

LEVER TRIM:08 Key controls lever 5208 × 808A 808A14 Lever always active 5214 × 814A 814A

DEVICE ONLY:

01, 02, 03, 08, 14 5201, 5202, 5203*,

-5208, 5214


Options


4R0 – Reliant Surface Vertical Rod - Reversible 5200

Price List 63PHI

ADD266219357285

ADD509509

75

0

32

72

54

54

36

663

689 695

756

771

815

945

712

689 695

44

59

103

233

-

Add 158.00


SUFFIX (ADD TO DEVICE #)CBR Reinforced CrossbarLD Less Dogging SEC Security Screws (crossbar arm screws are hex socket head)SNB • SNB Sex Nut and Bolt (8 req’d) without TrimSNB • SNB Sex Nut and Bolt (4 req’d) with Trim

NOTES:

TO ORDER: Specify: Device No. with options × Trim × Hand × Finish × Door Width, Height and Thickness.


• Devices for 3’-0” door are furnished standard.• Devices for 4’-0” doors are available at no extra charge.• Trim No. with prefix “Y” is for Olympian Device only.

Options

Pull Trim:

Lever/Knob Trim:

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 101, R101 × 170102 Exit only, dummy trim 102, R102 × 1702A03 Key retracts latchbolt 103, R103 × 1703A05 Key controls thumb piece 105, R105 × Y1705A15 Thumb piece always active 115, R115 × Y1715A

(Devices with 2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 101, R101 × 490102 Exit only, dummy trim 102, R102 × 4902A03 Key retracts latchbolt 103, R103 × 4903A08 Key controls lever/knob 108, R108 × Y4908A08 Key controls lever 108, R108 × VY4908A14 Lever/knob always active 114, R114 × Y4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15

101, R101, 102, R102,103*, R103*, 105, R105,108, R108, 114, R114,115, R115

*103 or R103 Device × Cylinder Only Application includes Cylinder Attachment Kit “CA-03”



100 5R0 – Olympian Rim - 100 Handed, R100 Reversible, Crossbar

Price List 63PHI

ADD 47 32 43 72 36

606, 612 613, 630

605 625

1359 1522

1494 1664

1586 1757

1405 1567

1685 1920

1789 2026

1267 1398

Add 158.00


SUFFIX (ADD TO DEVICE #)CBR Reinforced CrossbarLBR Less Bottom Rod (no extra charge)LD Less Dogging SEC Security Screws (crossbar arm screws are hex socket head)


SNB • SNB Sex Nut and Bolt (10 req’d - not including rod guides) LBR Device without Trim



TMB Transom Bracket

NOTES:

TO ORDER:

Options

Pull Trim:

Lever/Knob Trim:

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 201 × 170102 Exit only, dummy trim 202 × 1702A03 Key retracts latchbolt 203 × 1703A05 Key controls thumb piece 205 × Y1705A15 Thumb piece always active 215 × Y1715A

(Devices with 2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 201 × 490102 Exit only, dummy trim 202 × 4902A03 Key retracts latchbolt 203 × 4903A08 Key controls lever/knob 208 × Y4908A08 Key controls lever 208 × VY4908A14 Lever/knob always active 214 × Y4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 201, 202, 203*,205, 208, 214, 215




• Devices for 3’-0” door are furnished standard.• Devices for 4’-0” doors are available at no extra charge.• Top Rod for 7’-0” high door is furnished standard.• Top Rod for 8’-0” to 12’-0” high door is available at no

extra charge. (See catalog for fire rating).• Trim No. with prefi x “Y” is for Olympian Device only.



5R0 – Olympian Surface Vertical Rod - Non Handed, Crossbar 200

Price List 63PHI

ADD47 - 32 43

108

90

72

54

52

606, 612 613, 630

605 625

1858 2033

1993 2175

2085 2268

1904 2078

2184 2431

2288 2537

1766 1909

Add 158.00


NOTES:

TO ORDER:


• Devices for 3’-0” door are furnished standard

• Devices for 4’-0” doors are available at no extra charge• For mortise lock body ONLY see pg. 30.

Specify: Device No with options × Trim × Hand × Finish × Door Width, Height and Thickness

Options

Pull Trim:

Lever/Knob Trim:


SUFFIX (ADD TO DEVICE #)CBR Reinforced CrossbarLD Less Dogging SEC Security Screws (crossbar arm screws are hex socket head)SNB • SNB Sex Nut and Bolt (8 req’d) without TrimSNB • SNB Sex Nut and Bolt (4 req’d) with Trim

OuTSIDE FuNCTION DEVICE × TRImPULL TRIM:01 Exit only, cover plate 301 × 170102 Exit only, dummy trim 302 × 1702A03 Key retracts latchbolt 303 × 1703A05 Key controls thumb piece 305 × M1705A15 Thumb piece always active 315 × M1715A

(Devices with M2000C Series Trim are the same price)LEVER/KNOB TRIM:01 Exit only, cover plate 301 × 490102 Exit only, dummy trim 302 × 4902A03 Key retracts latchbolt 303 × M4903A08 Key controls lever/knob 308 × M4908A08 Key controls lever 308 × VM4908A14 Lever/knob always active 314 × M4914A

DEVICE ONLY:

01, 02, 03, 05, 08, 14, 15 301, 302, 303,305, 308, 314, 315


5R0 – Olympian Mortise - Handed, Crossbar 300

Price List 63PHI

606, 612 613, 630

605 625

1830 2007

1965 2149

2057 2242

1876 2052

2156 2405

2260 2511

1738 1883

ADD4732 43 72 36

Add 158.00


TO ORDER:Specify: 7R–A101-001 × US28/628.

COMPLETE PRODUCT ASSEMBLIES

PRODuCT NumbER DESCRIPTION ALARm FITS DOOR WIDThS FITS JAmbS uP TO A101-001 Automatic Relock No 3’ TO 4’ 6 3/4”A101-002 Automatic Relock Yes* 3’ TO 4’ 6 3/4”A101-012 Automatic Relock No 3’ ONLY 5 1/4” - 5 3/4”A101-013 Automatic Relock Yes* 3’ ONLY 5 1/4” - 5 3/4”A101-014 Automatic Relock No 4’ ONLY 5 1/4” - 5 3/4”A101-015 Automatic Relock Yes* 4’ ONLY 5 1/4” - 5 3/4”A102-001 Manual Relock No 3’ TO 4’ 6 3/4”A102-002 Manual Relock Yes* 3’ TO 4’ 6 3/4”A101-F01 Automatic-Fire Rated No 3’ TO 4’ 6 3/4”A101-F02 Automatic-Fire Rated Yes* 3’ TO 4’ 6 3/4”* ALARM MODELS A101-002, A101-013, and A101-F02 require two 9 volt batteries (INCLUDED) and aStandard 1-1/8” mortise cylinder (NOT INCLUDED)

OPTIONAL KITS: (A/C ADAPTER, ALARM, DOUBLE DOOR, LOW PROFILE)

KIT Num-bER DESCRIPTIONA103-002 Switch - For wiring to existing system (one individual kit) A103-003 Alarm Sub - Assembly A104-001 Low Profile Installation Kit - For door jambs greater than 6 3/4” A106-001 Standard Double Door Kit - For all models A106-002 Low Profile Installation Kit - For jamb depths greater than 6 3/4”A107-001 A/C Adapter Kit - For plug in battery back-up A107-002 A/C Adapter Hard Wire Kit - Wiring to electrical system w/battery back-up DROP SHIP Drop Ship Fee For Items Shipped Under $300

DEADBOLTS (REQUIRED) FOR DOUBLE DOOR APPLICATIONS:

mODEL DESCRIPTION1881-003 Sliding Deadbolt w/Padlock locking Hasp & Strike 1883-003 Sliding Deadbolt Keylocking with Strike

NOTES: • Prepaid Freight on all shipments of 30 or more units.• Express Program (ship within 48 hours) available for up to 10 units for extra 20% limited to models A101-002, 101-013, A101-015.

7R0 – Arm-A-Dor® – Security Exit Hardware

Price List 63PHI

US28/628

1,104 1,232 974

1,104 1,064 1,193 1,064 1,193 1,232 1,361

56 502 150 224 239 255 352 56

159 182


Function Specify: Grip Design (A,B,C) Lever or Knob Design (A,B,C,D,K) Decorative Levers (P) w/corresponding number Suffix: “KNR” Knurled Lever or Grip

3R0V4908AKNR × RHRB × 630 × 1-3/4″

“C” Grip

“A” Lever “B” Lever “C” Lever “D” Lever

”K” Knob “D” Lever “A” Lever “B” Lever “C” Lever 1700A “A” Grip

1700B “B” Grip

1700C “C” Grip

2000C

C03 Cast Plate

“Pull by others”

How to Order:

Style: 17, 20, 49, 29 Prefix designates: “C” Concealed Vertical Rod Trim “M” Mortise Trim “R” Retrofit Trim “V” Vandal Resistant (4908 Lever Trim only) “Y” Olympian Trim Product Series

4900A

2900A

4900B 4900C

2900B

4900D

2900C

4900K

2900D

Trim No. Hand Finish Door Thickness

TRIm NumbER4901, R4901, 2901 (cover plate)4902A, R4902A, 4903A, R4903A, M4903A, RM4903A, 2902A, 2903A

4908A, R4908A, 4914A, R4914A, Y4908A, Y4914A, M4908A, M4914A, RM4908A, RM4914A, 2908A, 2914AV4908A, RV4908A, VM4908A, VY4908A, RVM4908A

TRIm NumbER1701, R1701, 2001 (cover plate)1702A, R1702A, 1703A, R1703A, C1702A, C1703A, 2002C, 2003C

1705A, R1705A, 1715A, R1715A, C1705A, C1715A, Y1705A, Y1715A, M1705A, M1715A, RM1705A, RM1715A, 2005C, 2015C, Y2005C, Y2015C, M2005C, M2015C

• Lever Trims are shipped handed. Specify Hand.• 626 Trim is furnished for 628 and 630 Devices.• 2900 Series Trims are available for Apex Narrow Stile only.

• UltraShield™ Antimicrobial finish coating option available to Apex Trims. - 630AM list price for Trims

• For pricing on trims for the 5100 and 5200 series devices, see pages 22 and 23.


• Trims with “M” prefi x require 1-1/4” Mortise Type Cylinder on page 30.

NOTES: • 2900 Series T rim - Rim Type Cylinder for “03” function and Mortise Type Cylinder for “08” function, not furnished standard. Use 1-1/4” long standard Mortise Cylinder . Specify when required.

• All other Trims require Rim Type Cylinder .• Trim No. with prefi x “Y” is for Olympian Device only.• No extra charge for different Lever or Grip styles. A Lever/Grip Standard.

• 630 Trim furnished for 628 Devices. Grip Style “A” and “B” are furnished 626 for 630 Trim.

• Specify No. C03 Cylinder Attachment Trim for 2803 Device when Pull by Others is specified.

• Available in 605, 606, 612, 613, and 625 finishes.

Trim - Apex Wide & Narrow Stile, Olympian

Price List 63PHI

• Add $174.00 to the price of the device.

• Knurled Knob/Lever, Grip “KNR” add $75.00

606, 612 613, 630 605, 625

138 169

418 522

522 628

522 628

606, 612, 613, 630 605, 625

92 124

227 266

319 359

Add 22.00


DESCRIPTION PRODuCT NO.Complete Mullion AssembliesREMOVABLE MULLION - 2” × 2” × 8’-0”

Standard 811REMOVABLE MULLION - 2” × 3” × 8’-0”

Standard 822Fire Labeled (Includes Stabilizers and Interlocks) FL822Hurricane Code HC822Fire Labeled Hurricane Code (Includes Stabilizers) FLH822KEY REMOVABLE MULLION - 2” × 3” × 8’-0”

Standard KR822Fire Labeled (Includes Stabilizers and Interlocks) FLKR822Hurricane Code HCKR822Fire Labeled Hurricane Code (Includes Stabilizers) FLHCKR822• For greater heights add $18 for each additional 12" or less • Above Mullion Prices include Top and Bottom Fittings.Note: MCS822 mullion cap spacer available as suffix option for 822 series mullions (e.g. 822MCS x 600 x 8’).* For individual kit see 822 mullion accessories below.INDIVIDUAL MULLION FITTINGS

Mullion Cap MC811 Bottom Fitting-fl at sill MB811 Mullion Cap MC822 Bottom Fitting-fl at sill MB822 KEY REMOVABLE MULLION CAP KIT

Mullion Cap Assembly KMC822Fire Labeled Mullion Cap Assembly KMC822F 822 MULLION ACCESSORIES

*Mullion Cap Spacer MCS822 Stabilizers (2 per mullion) - Dull Black ST989 Interlock - Dull Black S1447

DESCRIPTION SERIES STRIKE NO.STRIKES - RIM DEVICES

Standard2100, 5100, 100, R100, FL2100, FL5100, FL100, FR100 S300 FL2400-Pair of Doors with Mullion S4582400, FL2400-Single Door (Roller Strike) S988

Optional

2100, 2400, 5100, 100, R100, FL2100, FL2400, FL5100, S301

FL100, FLR100 (Roller Strike) 2100, 2400, 5100, 100, R100, FL2100, FL2400, FL5100,

S458 FL100, FLR100 (Roller Strike) 2100, 5100, 100, R100 (Roller Strike) S988 2100 × 2200, 5100 × 5200, 100 × 200 S459

STRIKES - VERTICAL ROD DEVICESTop Strike 2200, FL2200, 5200, FL5200, 200, FL200 S300 Optional 2200, FL2200, 5200, FL5200, 200, FL200 S301 Bottom Strike 2200, FL2200, 5200, FL5200, 200, FL200 S460 STRIKES - MORTISE DEVICES

Standard Std Curved Lip Single Door ANSI (handed) S982

OptionalFlat 7/8” Lip ANSI (handed) S983 Open Back ANSI (handed) S984 Open Back 8” × 1-1/4” (handed) S985

STRIKES - CONCEALED VERTICAL ROD DEVICESTop Strike 2700, FL2700, 2800, FL2800, 2600, FL2600 S519 Bottom Strike 2700, FL2700, 2800, FL2800, 2600, FL2600 S460

Mullions and Strikes

Price List 63PHI

PRImER 600ALumINum 689 OR DARK bRONzE 695

434 512

553 631 711 789 789 867 949 1,025

949 1,065 1,142 1,222 1,222 1,304 1,333 1,381

18

88 101 63 82 143 159 117 137

434 453

61 74 69 (Dull Black)52 (Dull Black)

DuLL bLACK

605, 606, 612 613, 625, 630

58 -

72 -

72 -

72 - 72 - 40 -

58 - 72 - 47 -

- 58 - 58 - 109 - 116

58 - 47 -


SERIES DESCRIPTION PRODuCT NO.RIGID DUMMY TOUCHBAR

Apex Wide Stile Rigid 671DR-3, 671DR-4Narrow Stile Rigid N673DR-3, N673DR-4

ACTIVE DUMMY TOUCHBAR WITH MICRO SWITCHApex Wide Stile Active TS672DA-3, TS672DA-4

Narrow Stile Active TSN674DA-3, TSN674DA-4

OPTIONS FOR ACTIVE DUMMY TOUCHBARALK Exit Alarm: battery operated kit (9V battery included) ALW Exit Alarm: remote power kit (12 or 24 VDC) CD Cylinder Dogging: 1-1/4” Mortise Cylinder not includedDS Door Position Monitoring Switch TDS Touchbar Monitoring Double Switch

SERIES DESCRIPTION PRODuCT NO.MORTISE LOCK - HANDED

Apex & Olympian

Functions 01, 02, 03 M303, M303F Functions 05, 08, 14, 15 M308, M308F Functions 10 M310, M310F

• For Electric Mortise Lock see page 32.• 1-1/4” mortise cylinder not included. If cylinder is required please see cylinders below.• Lock front furnished beveled.• Available in 605, 606, 612, 613, 625, 630 Finishes.• When ordering specify: model no., hand and finish.(e.g. M303 × RHRB × 630)

SERIES DESCRIPTION PRODuCT NO.FIRE BOLT ASSEMBLY

Apex & Olympian Fire Bolt Assembly FB277

TRANSOM BRACKETApex & Olympian Transom Bracket TMB453

(Use Strike No. S300,see pg. 31)

TOOLSAll Devices 7/32” Dogging Key DK220

5/32” Hex Wrench* HW996 * Hex Wrench for crossbar plugs and mortise active case.

CYLINDERS

Rim Cylinder IE72

Mortise Cylinder IE74 C4

Note: Rim and mortise cylinders (housings) as well as interchangeable cores are available from our BEST product line. Please ask your local Stanley Security Solutions sales representative about the many options available to fit your specific requirements including patented keying systems such as BEST CORMAX™.

Accessories

Price List 63PHI

628606, 612 613, 630 605, 625

562 710 821

955 968 1,084

509 509 75

105 266

ALL FINIShES

553

135

56

15

See BEST Price Book for more

detail

See BEST Price Book for more

detail


DESCRIPTION PRODuCT NOPOWER SUPPLY - SERIES ELR150 (REQUIRED FOR ELR DEVICES)

Power Supply including (1) control module for (1) device ELR151 Power Supply including (2) control modules for (2) devices ELR152 Power Supply including (3) control modules for (3) devices ELR153 Power Supply including (4) control modules for (4) devices ELR154 Power Supply, no control modules ELR150

CONTROL MODULEControl Module card (on/off adjustable Time Delay standard) CM150-08

BATTERY BACK-UPBattery back-up card (batteries not included) BT150-07

POWER SUPPLY - SERIES PS160-6 (REQUIRED FOR DE DEVICES)Power Supply (6 amp) operates up to (4) DE Devices (wire run permitting) PS160-6

CONVERSION KITS PRODuCT NOELECTRIC LATCH RETRACTION*

For 3’-0”, 4’-0” Apex Wide Stile Device ELRK-3, ELRK-4, ELRKF-3, ELRKF-4 For 3’-0”, 4’-0” Apex Narrow Stile Device NELRK-3, NELRK-4, NELRKF-3, NELRKF-4 • ELR Conversion Kits are ONLY available for Apex 2000 Series Devices.* Requires PHI ELR150 Power Supply (see above).

MONITORINGAll Apex Devices Touchbar Monitoring Switch TSK309All Apex Devices Touchbar Monitoring Double Switch TDSK310 Apex Wide Rim Device Only Latchbolt Monitoring Switch LSRK298 Apex Wide Rim Device Only Latchbolt Monitoring Double Switch LDSRK299 Apex Wide SVR or CVR Devices Only Latchbolt Monitoring Switch LSVK910

Q OPTION RETROFIT KITSWireless Access Management System

QSRK5267 – 2103 Rim QSVK5268 – 2203, 2703, 2803 Surface and Concealed Vertical RodSurface and Conceled Vertical Rod

NOTE: For additional product details see Apex 2000 series catalog section.• Latchbolt Monitoring for Apex Mortise Devices, specify LSM303 or LSM308 Electric Mortise Lock, see pg. 32.

ELECTRIC RIM DEVICE2103, FL2103 Rim Devices Electric Lock/Unlock Outside Trim E2103K

Electrical Products

Price List 63PHI

LIST PRICE

614 840

1,068 1,295 389

227

418

638

770 770

219 266 219 266 219

464

532


DESCRIPTION PRODuCT NO.ELECTRIC MORTISE LOCK

Latchbolt monitoring, “03” Function LSM303, LSM303F Latchbolt monitoring, “08” Function LSM308, LSM308F Electric lock/unlock with switch to monitor outside trim (locked/unlocked) EM303, EM303F Electric lock/unlock with switches to monitor the outside trim (locked or unlocked) and to monitor the latchbolt LSEM303, LSEM303F

NOTES:• Fail Secure “FSE” is furnished standard. When Fail Safe is required specify “FS”.• Electric lock/unlock option specify 24V.• Price does not include 1-1/4” mortise cylinder. If cylinder is required please see cylinders on pg. 30.• Lock front furnished beveled.• When ordering specify: model no., voltage (24V), Fail Safe/Fail Secure, hand and finish.(e.g. EM303 × 24V × FS × RHRB × 630)

DEVICE SERIES DESCRIPTION DEVICE SIzE KIT NO.EXIT ALARM KIT

Apex Wide Stile .Battery Operated*

3’-0” ALK-3 4’-0” ALK-4

Remote Power3’-0” ALW-3 4’-0” ALW-4

Apex Narrow StileBattery Operated*

3’-0” NALK-3 4’-0” NALK-4

Remote Power 3’-0” NALW-3 4’-0” NALK-4

Reliant** Battery Operated*

3’-0” RALK-3 4’-0” RALK-4

Remote Power 3’-0” RALW-3 4’-0” RALW-4

Notes:• WH495 Wiring Harness - Required for Remote Arming/Disarming the Alarm. • Narrow and Wide Stile, kits are available in 605, 606, 612, 613, 625, 628, 630 Finishes.• To order specify Kit No. and Finish (e.g. ALK-3 × 630).* For Battery operated kits a 9 Volt Battery is included.** Reliant Series, kits are available in 689 or 695 Finishes.

DEVICE SERIES DESCRIPTION DEVICE SIzE KIT NO.DOOR POSITION MONITORING SWITCH*Apex Wide Stile Door Position Switch Kit All DS880 Apex Narrow Stile Door Position Switch Kit All NDS986 * Kit includes Endcap and Endcap Mounting Bracket, specify finish.

DESCRIPTION PRODUCT NO.POWER TRANSFER* Conc Power Transfer - accepts 5/16” wire bundle - 120° door opening EPT-5 * Door Loop - Armored Flex Conduit (less wires) 18” long EPT-2* Maximum 120 degree swing

Electrical Products - (continued)

Price List 63PHI

ALL FINIShES

768

1,073 1,121

ALL FINIShES

530

530

482

34

110

199 58


DESCRIPTION FuNCTION/ DEVICE TYPE ASSEmbLY NO.

ACTIVE CASE (INCLUDES LOCK SIDE FILLER)

Rim - Reversible01, 02 , 03 A2103 05, 08, 14, 15 A2108

Rim - Reversible (Fire Rated)01, 02 , 03 A2103F 05, 08, 14, 15 A2108F

Surface Vertical Rod - Reversible 01, 02, 03 A2203, A2203F05, 08, 14, 15 A2208, A2208F

Mortise - Reversible 01, 02, 03, 05 A2303 08, 14, 15 A2303F

Concealed Vertical Rod (metal) - Reversible

01, 02, 03 A2803, A2803F05, 08, 14, 15 A2808, A2808F

Concealed Vertical Rod (wood) - Reversible

01, 02, 03 A2703, A2703F05, 08, 14, 15 A2708, A2708F

TOP LATCH

Surface Vertical Rod (630 furnished for 628, includes Latch Cover)

2200, FL2200

TL22, TL22F

Concealed Vertical Rod (metal, includes Top Latch & Rod Assembly)

2800, FL2800

TL28-8, TL28-10, TL28F-8, TL28F-10

Concealed Vertical Rod (wood, includes Top Latch & Rod Assembly)

2700, FL2700

TL27-8, TL27-10, TL27F-8

BOTTOM LATCH

Surface Vertical Rod (630 furnished for 628, includes Latch Cover)

2200, FL2200

BL22, BL22F


2800, FL2800

BL28, BL28F

Concealed Vertical Rod (wood, includes Top Latch & Rod Assembly)

2700, FL2700

BL27, BL27F

COVERSACTIVE CASERim 2100, FL2100 AC21 Rim “10” Function - Handed 2110, FL2110 AC2110 Surface Vertical Rod 2200, FL2200 AC22 Mortise 2300, FL2300 AC23 Mortise “10” Function - Handed 2310, FL2310 AC2310

Concealed Vertical Rod 2700, FL2700,

AC23 2800, FL2800

SVR LATCh CASE(Top or Bottom) 2200, FL2200 LC22(630 furnished for 628)

Notes:• Assembly Nos. with Suffix “F” designate Assemblies for Fire Exit Hardware.• Specify Hand for all reversible Active Case Assemblies.

Apex Component Assemblies - Wide Stile

Price List 63PHI

STEEL PLATED 628

606, 612 613, 630 605 625

− 489 487 520

− 611 608 646

− 489 487 520

− − 288 325

196 − − −

301 − − −

− − 253 294

139 − − −

234 − − −

− 97 139 182

− − 121 151



TOUCHBAR COMPONENTS

Touchbar Assembly (less active case, end cap & brkt.) All Devices TBA-3, FLTBA-3, TBA-4,

FLTBA-4, TBA-26, FLTBA-26DEVICE ENDCAP

Endcap All Devices EC992Mounting Bracket All Devices MB305CENTER CHASSIS

Concealed Vertical Rod (metal) 2800, FL2800 CCH344TOP ROD

Surface Vertical Rod 7’-0” TR1854(Includes Rod Pin, Clip & Rod Guide) 8’-0” TR1855(630 furnished for 626 and 628) 1 0’-0” TR1857(12'-0" is not available on Fire Rated Devices) 12’-0” TR5197

Concealed Vertical Rod (metal)6’-8” to 8’-0” TR5518’-1” to 10’-0” TR552

Concealed Vertical Rod (wood)6’-8” to 8’-0” TR5548’-1” to 10’-0” TR555

BOTTOM ROD

Surface Vertical Rod (Includes Rod Pin, Clip & Rod Guide) (630 furnished for 626 and 628)

All Devices BR1859

Concealed Vertical Rod (metal) (Includes Bottom bolt) All Devices BR553

Concealed Vertical Rod (wood) (Includes Bottom bolt) All Devices BR556

EXTENDED BOTTOM RODSurface Vertical Rod All Devices BR5247-09Concealed Vertical Rod (metal) (Bottom bolt NOT included) All Devices BR5244-09

Concealed Vertical Rod (wood) (Bottom bolt NOT included) All Devices BR5246-09

ROD GUIDE, PIN & CLIPSurface Vertical Rod 2200, FL2200 RG124CYLINDER DOGGING KIT

Cylinder Dogging Kit (1-1/4” Mortise Cylinder not included, see pg. 30) All Devices CDK-3, CDK-4

DOUBLE CYLINDER KIT - “10” FUNCTION - HANDED(Cylinders not included, see pg. 30)

Rim Device (Includes locking/cylinder assy., cylinder collar and active case cover)

RDC-10

Mortise Device (Includes M310 Mortise Lock, extension assy., cylinder bracket/collar and active case cover)

MDC-10

SHIM KITOne set of 1/8” shims All Devices SMK994BACK PLATE

Access Control Trim Center Driven Cam All Devices BP21

Note: Converts 2101, 2102, 2103, 2108 to 21 Center driven cam exit device

Apex Component Assemblies - Wide Stile

Price List 63PHI

STEEL PLATED 628

606, 612 613, 630 605 625

- 733 847 945

- - 64 85 44 - - -

293 - - -

- - 73 97

107 - - -

178 - - -

- - 71 93

107 - - -

178 - - -

- - 117 143

90 - - -

90 - - -

- 36 37

- 135 135 139

- 378 416 473

- 929 972 1,038

52 - - -

50 - - -



ACTIVE CASE (INCLUDES LOCK SIDE FILLER)

Rim - Non Handed All FunctionsA24 A24F

Concealed Vertical Rod (metal) - Non Handed All Functions A26, A26F

COVERACTIVE CASERim 2400, FL2400 AC24Concealed Vertical Rod 2600, FL2600 AC26TOUCHBAR COMPONENTS

Touchbar Assembly (less active case, end cap & bracket) All Devices NTBA-3, FLNTBA-3,

NTBA-4, FLNTBA-4DEVICE ENDCAP

Endcap All Devices NEC993Mounting Bracket All Devices NMB591CENTER CHASSIS

Concealed Vertical Rod (metal) 2600, FL2600 CCH343TOP LATCH


2600 TL28-8, TL28-10 FL2600 TL28F-8, TL28F-10

BOTTOM LATCHConcealed Vertical Rod 2600 BL28 (metal, includes Bottom Bolt & Rod Assembly) FL2600 BL28F TOP ROD

Concealed Vertical Rod (metal)6’-8” to 8’-0” TR551 8’-1” to 10’-0” TR552

BOTTOM ROD

Concealed Vertical Rod (metal) (Includes Bottom Bolt) All Devices BR553

EXTENDED BOTTOM ROD

Concealed Vertical Rod (metal) (Bottom bolt NOT included) All Devices BR5244-09

CYLINDER DOGGING KIT

Narrow Cylinder Dogging Kit (1-1/4” Mortise Cylinder Not Included, see pg.30) All Devices NCDK-3, NCDK-4

SHIM KIT

Kit consists of: one set of 1/8” shims All Devices NSMK995

(Dull Black)Notes:• Assembly Nos. with Suffix “F” designate Assemblies for Fire Exit Hardware.

Apex Component Assemblies - Narrow Stile

Price List 63PHI

STEEL PLATED 628

606, 612 613, 630

605 625

- 540 537 537 - 660 658 699

- 540 537 573

- 97 139 181

- 734 855 945

- - 64 85 44 - - -

318 - - -

196 - - -

139 - - -

107 - - -

107 - - -

90 - - -

- 135 135 139

52 - - -


DESCRIPTION DEVICE TYPE ASSEmbLY NO.COVERS

ACTIVE CASERim 5100, FL5100 AC5100 Surface Vertical Rod 5200, FL5200 AC5200 SVR Latch Case (Top or Bottom) 5200, FL5200 LC5200DEVICE ENDCAP

Endcap All Devices REC999 Mounting Bracket All Devices MB305 TOP LATCH

Surface Vertical Rod (Includes Latch Cover) 5200, FL5200 TL52, TL52F

BOTTOM LATCH

Surface Vertical Rod (Includes Latch Cover) 5200, FL5200 BL52, BL52F

TOP ROD

Surface Vertical Rod (Includes Rod Pin, Clip & Rod Guide)

7’-0” RTR1860 8’-0” RTR1861 10’-0” RTR1863

BOTTOM ROD

Surface Vertical Rod (metal) (Includes Rod Pin, Clip & Rod Guide) All Devices RBR1864

EXTENDED BOTTOM RODSurface Vertical Rod All Devices BR5248-09ROD GUIDE, PIN & CLIP

Surface Vertical Rod 5200, FL5200 RRG123CYLINDER DOGGING KIT

Reliant Cylinder Dogging Kit (1-1/4” Mortise Cylinder Not Included) RCDK-3, RCDK-4

Notes:• Assembly Nos. with Suffix “F” designate Assemblies for Fire Exit Hardware.• Top and Bottom Latch assemblies are priced with covers, deduct cover price if not required.

Reliant Component Assemblies

Price List 63PHI

STEEL PLATED 689, 695 bLACK

- - 69

- - 50

43 - 28

- - 195

- - 163

- 52 -

- 52 -

- 89 -

- - 28

- 107 -


DESCRIPTION FuNCTION/ DEVICE ASSEmbLY NO

ACTIVE CASERim - Handed 01, 02, 03 A103

05, 08, 14, 15 A108 Rim - Reversible 01, 02, 03 AR103

05, 08, 14, 15 AR108 Rim - Handed 01, 02, 03 A103F

05, 08, 14, 15 A108F Rim - Reversible 01, 02, 03 AR103F

05, 08, 14, 15 AR108F Surface Vertical Rod - Reversible 01, 02, 03 A203, A203F

05, 08, 14, 15 A208, A208F Mortise - Handed All Functions A303, A303F INACTIVE CASE

All - Reversible All Devices B123, B123F TOP LATCH

Surface Vertical 200 TL22Rod FL200 TL22FBOTTOM LATCH

Surface Vertical 200 BL22Rod FL200 BL22FCOVERS

ACTIVE CASERim - Handed 100, FL100 AC10, AC10FRim - Reversible R100, FLR100 ACR10, ACR10FSurface Vertical Rod 200, FL200 AC20, AC20FMortise 300, FL300 AC30, AC30FINACTIVE CASE

Panic Exit Hardware All Devices HS123Fire Exit Hardware All Devices HS123FSVR LATCH CASE

(Top or Bottom) 200, FL200 LC22 Notes:• Assembly Nos. with Suffi x “F” designate Assemblies for Fire Exit Hardware.• Assemblies are priced with covers, deduct cover price if not required.* Specify Hand for all reversible or handed Active Case Assemblies.

Olympian Component Assemblies - Crossbar

Price List 63PHI

606, 612 613, 630

605 625

683 762

683 762

805 887

805 887

683 762

683 762

492 567

289 328

256 293

140 183

140 183

123 151


Trim Component Assemblies

DESCRIPTION FuNCTION/ DEVICE ASSEmbLY NO

CROSSBAR* 3’ DOOR 4’ DOORStandard All Devices CB123-3 CB123-4Reinforced All Devices CBR123-3 CBR123-4Knurled All Devices CBK123-3 CBK123-4CROSSBAR PLUG

All Devices CP123 TOP ROD*

Surface Vert Rod 7’-0” TR1854 8’-0” TR1855 10’-0” TR1857 12’-0” TR1858

BOTTOM ROD*Surface Vertical Rod All Devices BR1859EXTENDED BOTTOM ROD

Surface Vertical Rod All Devices BR5247-09 ROD GUIDE, PIN & CLIP

Surface Vertical Rod 200, FL200 RG124BACK PLATE ASSEMBLIES - RIM DEVICES

Rim 01, 02, 03 BP103 05, 08, 14, 15 BP108

Surface Vert Rod01, 02, 03 BP203 05, 08, 14, 15 BP208

NOTES:* 630 furnished for 626

SERIES DESCRIPTION KIT NOTRIM FUNCTION CONVERSION KITS

4900 Trim From “03” to “08” or “02” to “14” FC-08 YFC-08 OlympianV4900 Trim From “03” to “08” or “02” to “14” VFC-08 YVFC-08 Olympian

From 4900 Trim to V4900 Trim B-49-01 YB-49-01 OlympianM4900 Trim From “03” to “08” or “02” to “14” MFC-08 MYFC-08 Olympian2900 Trim From “08” to “03” (**specify Lever Style and finish) NFC-03

From “03” to “08” (**specify Lever Style and finish) NFC-08 CYLINDER ATTACHMENT KITS - CYLINDERS NOT INCLUDED

1700, 2000, 4900, V4900, 603 and 703A Series Trim CA-03T Wide Stile Device, “03” function, no outside Trim CA-03 Narrow Stile Device, “03” function, no outside Trim (**specify finish) NCA-03

2900 Trim - for “03” function CA-29032900 Trim - for “08” function CA-2908

Reliant 808A Trim (specify finish 689 or 695) RCA-08 ** Please see specific catalog pages for finish designation.

Olympian Component Assemblies - Crossbar

Price List 63PHI

STEEL PLATED

606, 612 613, 630

605 625

- 95 116 - 113 134 - 236 260

- 21 23

- 73 97

- 73 97

- 123 151

- 38 39

52 - - 52 - -

135

135

135

26 15 24 30 30 30


muLLIONS 811................................................................. 24.00 822 .............................. ..............................30.00 FL822 .................... ........................................30.00

muLLION FITTINGS MC811 .................................... ........................ 0.50 MC822 .........................................................2.25 KMC822 ................. .........................................3.75 MB811 .................................... ........................ 0.50 MC822F ....................... ................................2.25 KMC822F ............... .........................................3.75 MB822 .......................... .................................. 1.00

mORTISE LOCK M303, M308, M310 ................. ....................... 2.75

LOW ENERGY OPERATOR D-4990 ................. .................. ...................... 40.00D-4990T .................................. ...................... 40.00

ELECTRONICS PS-160 ................. .................. ......................... 10.0EPT-5 .................................. ............................. 1.00

WEIGhTS ARE TO ThE NEAREST 0.25 Lb.AND FOR ESTImATING PuRPOSES ONLY.

628 605, 606, 612, 613, 625, 630 689, 695 RELIANTWIDE NARROW WIDE NARROW OLYmPIAN

DEVICES - LESS TRIM Rim 15.00 14.25 18.50 18.00 14.00 15.00 Surface Vertical Rod 18.00 — 23.25 — 19.00 18.50 Less Bottom Rod 17.25 — 21.25 — 18.00 16.75 Mortise 17.00 — 20.00 — 16.00 — Concealed Vertical Rod (metal) 19.25 18.75 22.50 22.00 — — Less Bottom Rod 18.25 17.50 21.50 21.00 — — Concealed Vertical Rod (wood) 18.75 — 22.50 — — — Less Bottom Rod 17.00 — 21.00 — — — Device with DE option: add 13.00TRIMS

1700A 3.00 — 3.00 — 3.00 — 2000A 3.25 — 3.25 — 3.25 — 2900A — 3.00 — 3.00 — — 4900A, 4900K 5.50 — 5.50 — 5.50 — V4908A 6.00 — 6.00 — 6.00 — C03 2.00 — 2.00 — 2.00 — 501 — — — — — 0.75 602, 603 — — — — — 1.00 702, 703 — — — — — 1.75 808A, 814A — — — — — 3.25 ACTIVE CASE ASSEMBLY

Rim Device 2.50 2.00 2.50 2.00 6.00 1.25 Vertical Rod Device 3.00 — 3.00 — 6.00 1.25 Mortise Device 2.25 — 2.25 — 5.50 — Concealed Vertical Rod (metal) 3.00 1.75 3.00 1.75 — — Concealed Vertical Rod (wood).. 3.00 — 3.00 — — — TOUCHBAR ASSEMBLY

3'- 0" Device 10.25 10.25 13.75 13.75 — 10.25 4'- 0" Device 11.50 11.50 15.00 15.00 — 11.00 ELR Device 12.50 12.50 15.00 15.00 — — Dummy Touchbar 8.75 8.75 14.50 14.50 — — INACTIVE CASE ASSEMBLY

3'- 0" Device — — — — 3.00 — TOP LATCH ASSEMBLY

Surface Vertical Rod 2.50 — 2.50 — 2.50 2.00 Concealed Vertical Rod 2.75 2.75 2.75 2.75 — — BOTTOM LATCH ASSEMBLY

Surface Vertical Rod 2.00 — 2.00 — 2.00 1.75 Concealed Vertical Rod 2.50 2.50 2.50 2.50 — —

Weight Chart

Price List 63PHI

STANLEY Security Solutions, a business division of Stanley Black & Decker, is a provider of integrated access control and security solutions for institutional, commercial and industrial businesses and organizations. Stanley Security Solutions delivers a comprehensive suite of security products, software and integrated systems with a strong emphasis on service. Stanley Security Solutions is committed to extending its position as a leading comprehensive resource for a broad and extensive array of solutions that span the entire security spectrum.

www.stanleysecurity.com | 1.855.365.2407© 2013 Stanley Security Solutions, Inc. PL63PHI • 10/13

precision exit devices - mayflower sales - your … conversion kits 38 component assemblies apex...

Documents