POP#show ip route | section 192.168.0.0

O IA 192.168.0.0/24 [110/138] via 10.7.1.5, 00:05:12, Serial1/1

[110/138] via 10.7.1.1, 00:04:29, Serial1/0

POP#show ip ospf database router 10.0.1.1

… the printout has been shortened …

Routing Bit Set on this LSA

Advertising Router: 10.0.1.1

Link connected to: another Router (point-to-point)

(Link ID) Neighboring Router ID: 10.1.0.3

(Link Data) Router Interface address: 10.7.1.1

TOS 0 Metrics: 65535

Link connected to: a Stub Network

(Link ID) Network/subnet number: 10.7.1.0

(Link Data) Network Mask: 255.255.255.252

TOS 0 Metrics: 64

POP#show ip ospf database summary 192.168.0.0

… the printout has been shortened …

Summary Net Link States (Area 1)

Link State ID: 192.168.0.0 (summary Network Number)

Advertising Router: 10.0.1.1

Network Mask: /24

TOS: 0 Metric: 65545

Link State ID: 192.168.0.0 (summary Network Number)

Advertising Router: 10.0.1.2

Network Mask: /24

TOS: 0 Metric: 74

POP#show ip route | section 192.168.0.0

O IA 192.168.0.0/24 [110/138] via 10.7.1.5, 00:07:56, Serial1/1

event manager applet noReload

event cli pattern "^reload" sync no skip yes occurs 1 period 1

action 1.0 syslog priority informational msg "Reload is disabled"

event manager applet Shutdown

event none

action 1.0 cli command "enable"

action 1.1 cli command "configure terminal"

action 2.0 cli command "router ospf 1"

action 2.1 cli command "max-metric router-lsa"

action 3.0 cli command "event manager applet doReload"

action 3.1 cli command "event timer countdown time 20"

action 3.2 cli command "action 1.0 syslog msg shutting-down"

action 3.3 cli command "action 1.1 reload"

action 4.0 syslog msg "shutdown has been triggered"

X2#shutdown

X2#

%HA_EM-6-LOG: Shutdown: shutdown has been triggered

%SYS-5-CONFIG_I: Configured from console by vty0

%HA_EM-6-FMS_RELOAD_SYSTEM: fh_io_msg: Policy has requested a system

reload; -Process= "EEM Server", ipl= 0, pid= 230

%SYS-5-

RELOAD: Reload requested by EEM. Reload Reason: Embedded Event Manager acti

on.

C1#show ip route | section 192.168.0.0

O 192.168.0.0/24 [110/74] via 10.7.5.2, 00:07:21, Serial1/1

C1#show ip ospf database router 10.0.5.1

… the printout has been shortened …

LS Type: Router Links

Link State ID: 10.0.5.1

AS Boundary Router

Number of Links: 6

… stub links have been removed …

Link connected to: a Transit Network

(Link ID) Designated Router address: 192.168.0.2

(Link Data) Router Interface address: 192.168.0.1

Number of TOS metrics: 0

TOS 0 Metrics: 65535

Link connected to: another Router (point-to-point)

(Link ID) Neighboring Router ID: 10.0.1.2

(Link Data) Router Interface address: 10.7.5.14

Number of TOS metrics: 0

TOS 0 Metrics: 65535

Link connected to: another Router (point-to-point)

(Link ID) Neighboring Router ID: 10.0.1.1

(Link Data) Router Interface address: 10.7.5.2

Number of TOS metrics: 0

TOS 0 Metrics: 65535

C1#show ip route | section 192.168.0.0

O 192.168.0.0/24 [110/84] via 10.0.2.2, 00:00:05, FastEthernet0/0

X1#show running | section router ospf

router ospf 1

log-adjacency-changes

passive-interface FastEthernet0/0

network 0.0.0.0 255.255.255.255 area 0

C1#show ip route | section 192.168.0.0

O 192.168.0.0/24 [110/74] via 10.7.5.2, 00:02:34, Serial1/1

C1#show ip ospf database router 10.0.5.1

… the printout has been shortened …

Link State ID: 10.0.5.1

AS Boundary Router

Number of Links: 6

Link connected to: a Stub Network

(Link ID) Network/subnet number: 192.168.0.0

(Link Data) Network Mask: 255.255.255.0

Number of TOS metrics: 0

TOS 0 Metrics: 65535

… rest of the printout deleted …

C1#show ip route | section 192.168.0.0

O 192.168.0.0/24 [110/84] via 10.0.2.2, 00:06:15, FastEthernet0/0

router ospf 1

log-adjacency-changes

passive-interface FastEthernet0/0

network 0.0.0.0 255.255.255.255 area 0

default-information originate always metric 20 route-map DefaultRoute

!

route-map DefaultRoute permit 10

match ip address prefix-list DefaultSubnet

!

ip prefix-list DefaultSubnet seq 5 permit 172.16.0.0/24

C1#show ip route | section 0.0.0.0/0

O*E2 0.0.0.0/0 [110/20] via 10.7.5.2, 01:09:32, Serial1/1

C1#show ip ospf database external

… the printout has been shortened …

LS Type: AS External Link

Link State ID: 0.0.0.0 (External Network Number)

Advertising Router: 10.0.5.1 (X1)

Network Mask: /0

Metric Type: 2 (Larger than any link state path)

Metric: 20

Forward Address: 0.0.0.0

External Route Tag: 1

LS Type: AS External Link

Link State ID: 0.0.0.0 (External Network Number)

Advertising Router: 10.0.5.2 (X2)

Network Mask: /0

Metric Type: 2 (Larger than any link state path)

Metric: 20

Forward Address: 0.0.0.0

External Route Tag: 1

Listing 18: Default route advertised by X1

C1#show ip ospf database external adv-router 10.0.5.1

… the printout has been shortened …

Link State ID: 0.0.0.0 (External Network Number)

Advertising Router: 10.0.5.1

Network Mask: /0

Metric Type: 2 (Larger than any link state path)

Metric: 16711680

http://www.learning.nil.com/