owner's engineer services - statement of capabilities
TRANSCRIPT
Solar Advisory ServicesOwner’s Engineer Services - Statement of Capabilities
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract
Module 4: Detailed Design Review
Module 5: Supervision During Execution
Module 6: Performance Acceptance Test
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract
Module 4: Detailed Design Review
Module 5: Supervision During Execution
Module 6: Performance Acceptance Test
”“The objective of conducting Pre Feasibility Analysis is to be able understand the expected generation and costs expected from the Solar PV Power Project to arrive at acceptable rate of returns from the project.
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation AssistanceLand Selection:
Gensol ranks the land parcels available on the basis of parameters affecting EPC Costs and Revenues from the project:
• Land - The expected generation calculated should be based on dependable data
- The soil type would determine the cost of the Module Mounting Structure
- The shape of the land would decide the area required per MW of installation
• Substation - The Substation should not be very far from the land as it would result in cost escalation for the
evacuation infrastructure and greater transmission loss
- The Substation should have a high Grid Uptime
- The Substation should have a provision of evacuation of Solar Power through Independent Feeder
• Others - Availability of Construction Power, Water and Labor
- The Terrain and Ease of Access to the Site
Bid Assistance
• Carrying out Comprehensive Analysis for:
• Choice of Technology
• Choice of EPC Contractor
• Probability and Provision for Low Cost Funding
• Arriving at the Bidding Tariff and Bidding Capacity at which the Project Developer would be assured of acceptable returns. Alternately,
modeling of financial returns of the Renewable Energy Certificate route.
• Preparation of Request for Submission / REC Registration Documents
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract
Module 4: Detailed Design Review
Module 5: Supervision During Execution
Module 6: Performance Acceptance Test”“Solar Power till date is a young business in
nascent stage. Detailed Project Report by a consultant of repute helps secure faster bank financing and better project understanding. Gensol is consultant to many banks for 1000+ MW and hence, carries trust and credibility with itself.
Owner’s Engineer
Module 2: Detailed Project ReportTypical Table of Contents of a DPR:
1. Introduction
2. Executive Summary
3. Power Scenario In India
4. Project Justification
5. Salient Features Of The Site
6. CDM Registration
7. Power Sale Arrangement
8. Technology Selection
9. Description of BoP Systems
10. Instrumentation & Control Systems
11. Project Codes and Standards
12. Project Materials Specifications
13. Project Equipment Specifications
14. Environmental Impact Assessment
1. Project Execution Plan
2. Quality Control and Inspection
3. Plant Operation and Maintenance
4. Project Cost and Generation Cost
5. Financial Analysis
6. Risk Factors and Management Perception
7. Annexure 1 – Project General Specifications
8. Annexure 2 – Study Reports
9. Annexure 3 – Policy Reports
10. Appendix A – Drawings
11. Appendix B – Engineering Calculations
12. Appendix C – Engineering Software
13. Appendix D – List of Established Suppliers
14. Appendix E – Project Schedule
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract Review
Module 4: Detailed Design Review
Module 5: Supervision During Execution
Module 6: Performance Acceptance Test ”“There are 150+ Solar EPC Contractors in India with varying expertise and costs. Gensol follows a tailor made scoring matrix to shortlist and select. Further, good and exhaustive EPC Contracts ensure easier financing and risk mitigation with exhaustive Scope of Work.
Owner’s Engineer
Module 3: EPC Contractor & Contract ReviewRelease of Request for Proposal (RfP)
• Defining Exhaustive Scope of Work with well defined Quality Criteria including Designing, Civil Work, Electrical Work, Testing and
Operation & Maintenance
• Arranging and coordinating pre/post bid meetings for clarification to the queries of bidders.
Shortlisting & Finalization• Defining Criteria for Comparison• Preparing Comprehensive Scoring Sheet according to weightage and qualifying criteria• Arriving at Final Scores for Responses from EPC Contractors• Conducting Background Checks on Tie-ups for Equipment Supply• Conducting Rounds of Negotiation
Drafting EPC Contracts:• General & Special Terms of Agreement• Commercial Terms• Warrantee Terms• Guarantees
• Performance Bank Guarantee• Advance Bank Guarantee• Minimum Energy Generation – Bank Guarantee
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract Review
Module 4: Detailed Design Review
Module 5: Supervision During Execution
Module 6: Performance Acceptance Test ”“Review of the Contractor’s basic and detailed engineering and design is important to determine the compatibility of equipment, to ensure that systems are capable of performing their specified functions and that adequate technical specification and drawings are provided by the Contractor for all plant equipment.
Owner’s Engineer
Module 4: Detailed Design ReviewNon – Exhaustive List of Parameters to be be reviewed:
Electrical Direct Current (Pre Inverter)
• Plot Plan Layout
• Modules Series and Parallel Combination
• String Combiner Box
• Cable Sizing
• Inverter
• SCADA System
Electrical Alternate Current (Post Inverter)
• Transformer Rating
• LT and HT Panels
• Conductor Sizing
Civil & Structural Drawings
• Access Roads
• Drainage
• Land Development
• Module Mounting Structure
• Inverter Room
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract Review
Module 4: Detailed Design Review
Module 5: Supervision During Construction
Module 6: Performance Acceptance Test ”“Solar PV Power Project is a 25 year investment. Quality Control is important to ensure the long life of project while monitoring implementation progress helps in avoiding time and costs overruns.
Owner’s Engineer
Module 5: Supervision During ConstructionConstruction Monitoring
• Undertaking visit to the Project site to assess progress in engineering, procurement and construction activities and to review
contractor’s presentation of problem areas.
• Advising Client on possible problems and delays that may arise in future, to ensure timely action to prevent the problem;
• Advise clients immediately of major problems that may arise;
• Reviewing quality control procedures and reports;
• Reviewing change orders to the Contract and informing client of the amount of change order(s) and its status.
• Review progress of implementation of the Project and its variance vis-s-via scheduled implementation
• Comment on critical path activities & estimate of hand over of Project in comparison within timelines as per EPC contract
• After every visit the consultant would prepare a progress report outlining all activities completed and those scheduled for the coming
and an independent assessment of the status.
Review the O&M Manuals
The LIE will Review the O&M manuals and comment on their completeness and compatibility to those of similar facilities. In particular, the
scheduled maintenance, preventive maintenance, and spare parts programs will be reviewed.
Owner’s Engineer
Module 1: Pre Feasibility & Project Allocation Assistance
Module 2: Detailed Project Report
Module 3: EPC Contractor & Contract Review
Module 4: Detailed Design Review
Module 5: Supervision During Construction
Module 6: Performance Acceptance Test
”“Performance Acceptance Test is critical to the final handing over of the plant to the Project Developer and to assess if the Performance guarantees of the EPC Contractor will hold good.
Owner’s Engineer
Module 6: Performance Acceptance TestWitness Performance Testing for Provisional Acceptance test / Mechanical Completion
• Review the test procedures developed by the contractor and confirm compliance with applicable test codes and standards and with
testing criteria specified in the EPC contract.
• Monitor on site overall plant performance tests.
• Review test reports prepared by contractor.
• Submit a letter summarizing testing procedures and verifying attainment of each performance guarantee specified in the main contract.
Comments on accuracy of Test Reports and identify any discrepancy or errors noted.
Witnessing Performance Testing for Final Acceptance Test
• Monitor on site overall plant performance tests.
• Review test reports prepared by contractor.
• Submit a letter summarizing testing procedures and verifying attainment of each performance guarantee specified in the main contract.
Comments on accuracy of Test Reports and identify any discrepancy or errors noted.
”“About Gensol Consultants Pvt Ltd
Gensol Consultants, an ISO 19001:2008 certified company is a pioneer in Renewable Energy and Carbon Advisory. Gensol Consultants is an advisor to 1500MW+ Solar PV Projects under execution.
360o Clean Energy Solutions:
• Solar Advisory & Project Execution• Lender’s Engineer
• Solar Project Management Service
• Environment, Health and Safety Audits for Solar Projects
About Gensol Consultants Pvt Ltd
Few Facts:
• 130+ Trained Team - all Graduates and Post Graduates in
Energy and Environment
• 1500 MW+ Solar Power Projects under advisory
• Recipient of multiple awards including BusinessWorld
Hottest Young Entrepreneur and Economic Times Power
of Ideas.
Offices at:
Ahmedabad | Gurgaon | Hyderabad
Quoted In:
Business Dailies: Business Standard | Economic Times
Business Magazines: Business India | Forbes India
Industry Journals: Power Line | Energetica | EQ International
Solar Advisory & EPC Services
Owner’s Engineer:As Owner's Engineer, we guide our clients or investors through the complete process of project feasibility, financial closure, bid process management, vendor finalization and supervision of project execution up till successful project commissioning which meets our strict quality criteria.
Lender’s Engineer:Being consultants to some of the leading lending institutions in the country, we assess the key parameters impacting the returns from the project like generation, cost and conditions of the EPC Contract, preparedness of Project Developer for execution etc.
Detailed Engineering and Vetting of Drawings:Gensol Solar Division is staffed with experienced Electrical, Electronics, Mechanical and Civil Engineers who undertake detailedengineering of Solar PV Power plants on behalf of EPC Contractors and vetting of drawings for Project Developers and investors.
Pre Feasibility Analysis and Bidding Assistance:Every solar power policy is different in terms of eligibility criteria, method of allocation, allowed location of project etc. Gensol’s engineers and analysts help Project Developers select the sites most suitable for setting up solar power projects, assist in price discovery for securing allocation in cases of reverse bidding and in documentation to be submitted for the same.
Detailed Project Report:A Detailed Project Report is one of the most important documents to assess the feasibility of project and to get financial closure. Gensol with its sector expertise and established standing in the renewable energy consultancy not only gives the most exhaustive analysis of the project but also enjoys the confidence of industries, investors and banks alike.
Engineering Procurement & Construction (EPC)Gensol has executed kW scale rooftop projects across the country and prides itself of providing cost effective and top qualitysolar power solutions.
”“Experience Snapshot
Gensol Consultants is among the leading consultants to Project Developers, Financial Institutions and Investors. Total portfolio of Solar Power Projects under advisory at Gensol Consultants is 1500 MW.
• 60 MW (4 Projects) – Haryana Power Generation Corporation Ltd, Haryana Govt. enterprise
• 25 MW – Alex Astral Solar Power Ltd., Gujarat• 20 MW – Essel Infraprojects, Maharashtra• 15 MW – NALCO, Orissa• 5 MW – Konark Group, Gujarat• 5 MW – Swiss Park Vanijya Pvt Ltd, Rajasthan• 5 MW – OPG Energy Pvt Ltd, Rajasthan• 5 MW – Alex Spectrum Radiation Pvt Ltd, Rajasthan• 3 MW – Bharat Light & Power, Rajasthan
Owner’s Engineer:• 30 MW – Welspun Energy, Gujarat• 25 MW – Sun Group, Gujarat • 25 MW – Sun Edison, Gujarat• 10 MW – Greeninfra Solar, Gujarat• 20 MW – PLG Power, Gujarat• 6 MW – Indiabulls Power, UP & Maharashtra • 10 MW – Millenium Synergy, Gujarat• 5 MW – ESP Urja, Gujarat
Lender’s Engineer:
• 20 MW – Client Confidential, Gujarat• 8.5 MW – Jain Irrigation, Maharashtra• 1 MW – L&T ECC Division, Rajasthan
Detailed Designing
• 2 MW – R V Akash Ganga, Uttarakhand
Detailed Design Vetting
• 15 MW – Boyance Infrastructure, Rajasthan• 5 MW – Sattva Salarpuria Group, Karnataka• 5 MW – RSB Energy, Orissa• 5 MW – Chemtrol Industries, Rajasthan• 5 MW – Shashi Kiran Group, Karnataka• 3 MW – MWP Energy, Karnataka• 2 MW – Shri Bhagirathi Textiles Ltd, Maharashtra• 2 MW – Ratna Dying, Chattisgarh• 1 MW – NIT Hamirpur, Himachal Pradhesh
Feasibility Analysis & DPR:
Experience Snapshot
• 175 MW Grid Connected Gujarat
• 60 MW Grid Connected Haryana
• 29 MW Grid Connected Rajasthan
• 15 MW Grid Connected Orissa
• 34.5 MW Grid Connected Maharashtra
• 2 MW Grid Connected Uttarakhand
• 13 MW Grid Connected Karnataka
• 1 MW Grid Connected Himachal Pradesh
• 212 kW off Grid Gujarat
• 100 kW Off Grid Haryana
• 100 kW off Grid Assam
• 5 kw Off Grid Delhi
• 5 kW Off Grid Rajasthan
• 2 kW Off Grid Uttar Pradesh
Advisory:
Execution:
”“Gensol Consultants is among the leading consultants to Project Developers, Financial Institutions and Investors. Total portfolio of Solar Power Projects under advisory at Gensol Consultants is 1500 MW.
Gensol Consultants Pvt Ltd
E: [email protected]: www.gensolsolar.comPh: +91 79 40068235F: +91 79 40068239
Corporate Office108 Pinnacle Business, Corporate Road, Prahalad Nagar,Ahmedabad - 380015Gujarat, India
Gensol is one of the leading consultants and system integrators for Solar Power Plants. We boast of a portfolio of over
1500 MW of Solar Photovoltaic Plants. Gensol is also a channel partner to Ministry of New & Renewable Energy and
installs kW scale Solar Rooftop systems on a turnkey basis with more than 15 MW of cumulative installations across the
country.
The information contained herein is of a general nature and is not intended to address the circumstances of any particular
individual or entity. Although we endeavor to provide accurate and timely information, there can be no guarantee that such
information is accurate as of the date it is received or that it will continue to be accurate in the future. No one should act on
such information without appropriate professional advice after a thorough examination of the particular situation.