PRASHANT M. SAWANT C/301, Vrundavan Complex, Shivaji Path, Raju Nagar, Dombivli (W). Pin : 421 202

Sawantprashant87@yahoo.com Mobile: 9967037407

Summary: Quality Assurance - Quality control - Inspection – Inspection Co-ordination

6.5 Years of experience in the field of Quality assurance, Quality control, Inspection, Inspection co-

ordination, Expediting, Vendor evaluation and supplier surveillance in construction, fabrication and welding

fields including assistance in corporate and project quality management.

Experience in Oil and Gas sector includes inspection of raw materials, forgings , tube , pipes , plates, fittings

, flanges , valves , structural items , storage tanks and fabricated items like pressure vessels , heat

exchangers.

Project experience in solar power plant and nuclear infrastructure projects.

Development of project execution procedures, quality assurance / control procedures, Inspection and Test Plans and work instructions as required by the various contracts and project specifications.

Academic Credentials:

Name of the Degree Name of the Board / University Percentage / Grade YEAR OF PASSING B.E. ( Mechanical ) University of Mumbai 71.25 % 2010

H.S.C. University of Mumbai 74.83 % 2005

S.S..C. University of Mumbai 80.53 % 2003 Certifications : 2015, CSWIP 3.1 – Welding Inspector

TWI (India) Private Ltd , Mumbai 2011, ASNT Level II in Radiographic Testing ( Interpretation )

Bhide’s Institute of Testing Technology Pvt. Ltd. , Mumbai

2011, ASNT Level II in Ultrasonic Testing Bhide’s Institute of Testing Technology Pvt. Ltd. , Mumbai

2011, ASNT Level II in Liquid Penetrant Testing Bhide’s Institute of Testing Technology Pvt. Ltd. , Mumbai

2011, ASNT Level II in Magnetic Particle Testing Bhide’s Institute of Testing Technology Pvt. Ltd. , Mumbai

2008, Foundation in Mechanical CADD ( AUTO CADD )

CADD Centre Training Services, Mumbai Workshops and Trainings: 2013, workshop on Stainless Steel Welding

Process Plant & Machinery Association Of India ( PPMAI ) @ Bandra Reclamation

2012, Annual Seminar on Semi-Automatic Welding Processes & Advances Indian Institute of Welding ( IIW ), Mumbai @ Don Bosco Maritime Academy 2015, Training on Solar Photo Voltaic Grid Connected Power Plants

National Training Centre for Solar Technology, Banglore @ Karnataka Power Corporation Limited (KPCL) Work Experience : Currently Working as “ INSPECTION ENGINEER “ in M/S. TUV India Pvt. Ltd. ( TUV NORD ) since April 2012 Duties & Responsibilities: carry out inspection at different vendor premises of various bought out items, raw materials, forging, tubes,

pipes, plates, fittings, flanges, valves, storage tanks, etc. also fabricated items like Pressure Vessels, Heat Exchangers and structural fabrication.

Final Inspection of SEAMLESS & ERW Line pipes of various size (from ½“ to 14 “) as per A 106 GR B & API 5L GR B at M/s. Maharashtra seamless ltd. Nagothane for client IOCL, L&T, HPCL, Samsung, etc.

On Line Monitoring & Final Inspection of LSAW pipes at M/s. Lalit pipes & pipes ltd. ( Size – upto 50 “ OD ) Witness NDT from raw material till finish stage in fabrication and forgings, etc. Inspect & certify materials/equipment at vendor premise on behalf of client such as L&T, Reliance, Samsung,

IOCL, etc. Witness & certify material testing machines at test labs for compliance to material testing standard. WPS/PQR/WPQ Qualification and approval. Perform vendor evaluation for capability and quality aspect of the manufacture.

Major Projects handled:

Solar pv power plant project { Kukshi (M.P.) } of M/s. Real Gold Developer for vendor M/s.Alfa Infraprop

Pvt. Ltd. At Sub-vendor place M/s. Sterling Strips (Bhiwandi), involves

1. Expediting of raw material 2. Inspection of raw material at vendor / sub-vendor premises. 3. Online monitoring / Inspection during production of S Purlins, Channel poles, C section

rafters, End bracing struts, Purlin supporting plates, clamps. 4. Management of raw material during production for complete production of all parts /

Components of project. 5. Final visual & Dimensional inspection of S Purlins, Channel poles, C section rafters, End

bracing struts, Purlin supporting plates, clamps after completion of hole punching as per drawing and painting on punching areas.

Bhabha Atomic Research Centre (Tarapur ) project ASFSF ( i.e. additional spent fuel storage facility ) as “ QA MANAGER ( Mechanical ) ”, involves,

1. Study of Technical specification and approved drawings of M/s. BARC to understand some special requirements for the project.

2. Preparation of work procedures, NDT procedures , Mock up test procedures , Quality Assurance plans and inspection report formats for various systems of the entire project.

3. Inspection of raw material, Identification of material for lab testing and lab testing witness as

per material specifications. 4. In process inspection as per approved QAP of Leak Detection module, S S Lining of fuel pool

area, CS piping, SS piping, CS and SS Embedded parts and various systems involved in project.

5. WPS/PQR/WPQ Qualification and approval. 6. Preparation and maintenance of all quality related documentation.

Prior Work Experience M/s. International certification services Pvt. Ltd. , Mumbai (Dec 2011 to March 2012) Designation: - Jr. Surveyor ( Inspection ) Duties & Responsibilities:

carry out inspection at different vendor premises for inspection of various bought out items, raw material, forging, casting, tubes, pipes, plates, fittings, flanges, valves for clients like BEML, HPCL, BPCL, etc.

Perform vendor evaluation for capability and quality aspect of manufacture.

Major Projects handled:

Onsite Inspection / Supervision for Mahanagar Gas Pipeline project ( Compressed Gas Distribution Network) at Ambernath MIDC area.

M/s. Surindra engineering company Ltd. , Mumbai ( Aug 2011 to Nov 201 ) Designation: - Quality Control Engineer Duties & Responsibilities: Preparation of Quality Control Procedures, NDE Procedures & Quality Assurance Plans for

production of LSAW pipes as per customer requirements. Raw material inspection On process inspection during production of LSAW pipes Dimensional inspection of pipes Visual inspection of weld joints Liquid Penetrant test of weld joints Radiographic interpretation of weld joints Ultrasonic testing of weld joints Hydro testing of pipes Ensuring product quality through in-process & final inspection control in accordance with

requirements of QAP for both in-house as well as subcontracted jobs. Liaise with third party inspection agency / surveyors Perform physical tests like Bend test, Tensile test , Impact test All quality control documentation Ensuring product quality through in-process & final inspection control in accordance with

requirements of QAP for both in-house as well as subcontracted jobs. Final product inspection (i.e. Painting & staincelling as per clients requirements ) before dispatch

M/s. Pinnacle Infrastructure International Pvt. Ltd. , Murbad ( Dec 2010 to Jun 2011 ) Designation: - Production cum Quality control Engineer Duties & Responsibilities:

Production planning, Manpower allocation and labor handling Preparation of Quality Control Procedures, NDE Procedures & Quality Assurance Plans for

production of LSAW pipes, Turnkey Projects & Fabrication as per customer requirements. Raw material inspection On process inspection during production of LSAW pipes & fabrication. Visual and Dimensional inspection of weld joints of LSAW pipes & Fabricated structures. Witnessing Non-destructive tests and Interpreting the result Liaise with third party inspection agency / surveyors All quality control documentation and Final product inspection before dispatch.

M/s. GEA Ecoflex India Pvt. Ltd. , Navi Mumbai ( Jun 2010 to Nov 2010 ) Designation: - Trainee Engineer Duties & Responsibilities: Production planning, Manpower allocation and labor handling Preparation of Auto CADD drawings and convert them into CNC cutting program using 2D

software for CNC cutting of plates to different sizes as per product classification. On process supervision / inspection during production of plate type heat exchangers. Visual and Dimensional inspection of plate type heat exchangers.

Computer skills : Design software like AUTO CADD and Pro-efficient in Microsoft Office, Microsoft Excel. Very well converse with computer hardware & software’s

Key strengths :

Flair communication skills and Flair for team work Quick learner and Hard working Implementation of assigned work with pace and determination

Personal Information:

Date of Birth : 16th September 1987

Marital Status : Married.

Language Known : English, Hindi, Marathi.

Nationality : Indian

Declaration: I solemnly declare that the above information is true and believable to the best of my knowledge. PRASHANT M. SAWANT