microsystems product selection guide 5ooo series...microsystems product selection guide flexible...

With the addition of ControlMicrosystems’ 5000 Series I/OExpansion and Communication mod-ules, the series of powerful SCADAPackcontrollers become even more power-ful. Any+ SCADAPack controller is easilyexpandable from its base I/O configura-tion to more than 700 process I/Opoints, and regardless of what commu-nication format is required, there is acommunication module to fit the need.

OverviewFlexible I/O – The Control Microsystems5000 Series I/O Expansion modules areavailable for a wide range of processI/O requirements, from digital andanalog I/O to I/O-simulators and a UPSmodule. A maximum of twenty I/Omodules may be connected for anexpansion of up to 512 digital outputs,512 digital inputs, 128 analog inputs,64 counters and 64 analog outputs, onsome models.

5OOO SeriesExpansion & Communication Modules

CONTROLMICROSYSTEMS Product Selection Guide

Flexible CommunicationsAlready a SCADAPack strong point,communication flexibility is furtherincreased with a selection ofconnectivity modules. From thetraditional leased line, phone line andradio-transceiver formats to the latestEthernet and Bluetooth technologies,Control Microsystems 5000 Seriescommunication modules make data-transfer easy and cost-effective.

Applications and BenefitsWhether being specified for a newSCADAPack installation or incorporatedinto an existing one, the I/O Expansionand Communication modules arespecifically designed for use withSCADAPack controllers, are DIN rail-mountable, and are powered either bythe SCADAPack itself or by an external

w w w . c o n t r o l m i c r o s y s t e m s . c o m

power supply. The 5103 UPS moduleprovides additional power whererequired.

With a wide selection of I/O expansionmodules available, many diverseindustries, including water andwastewater, oil and gas, and industrialprocess control, will benefit fromSCADAPack process control and SCADAapplications.

A variety of communication modulesensures that SCADAPack controllerscan be integrated into existingcorporate LANs and WANs, andindustrial plant-based networks suchas leased-line and RS-485.3 year warranty on parts and labor for allExpansion and Communication Modules.+ The SCADAPack100 controller does not support

I/O Expansion modules.

Expansion

n Analog input module: 5 variationsn Analog output module: 5 variationsn Digital input/output relay module: 2 variationsn Digital input module: 13 variationsn Digital output module: 5 variationsn External UPS module

Communication

n Spread Spectrum radio transceiver module: 2 variationsn Bluetooth local communications interface: 2 variationsn Dial-up modem modulen Bell 202 radio/leased line modem modulen HART protocol interface modulen Ethernet Switch module

Module 53O2Analog Output Module

Features:n 20mA Currentn Low Powern Class 1, Division 2 for use in hazardous

locations

Module 55O2Differential Analog Input Module

Features:n 8 Differential Isolated Inputs for

high versatilityn Integrated transient protection

with fusingn Bipolar 13 bit resolutionn High common mode voltage rejection

and tolerance

Module 55O3RTD Input Module

Features:n 4 RTD inputsn Optical isolation for high reliabilityn Integrated transient protectionn Minimal self-heatingn Multi-range

Module 55O4Thermocouple Input Module

Features:n 8 type J, K, T, E or ±80 mV

inputsn Optical isolation for high

reliabilityn Integrated transient protectionn Linearized and cold junction

compensated

Model Part No. Description

5302* 297176 4 channel isolated analog output module, 0-20/4-20mA (only two channels supported with SmartWIRE)

Analog Input Modules Analog Input Modules

Analog Output Module


5502 297211 8 channel isolated, differential, bipolar analog inputmodule, +/-10V or +/-20mA


5503 297151 4 channel isolated, four wire RTD input module, PT100


5504 297166 8 channel isolated thermocouple input module, J,K,T,E

Module 55O5RTD Input Module

Features:n Input values scaled and

linearizedn Data returned as 32-bit floating-point

numbern Lower power consumptionn Automatic 3-wire RTD

compensationn 5503 emulation mode for Legacy systems


5505 297318 4 channel 3 or 4 wire RTD input module,100Ω platinum

Module 55O6Analog Input Module

Features:n 0 to 20mA / 4 to 20mA inputsn 0 to 5V / 1 to 5V inputsn Individual input configurationn 5501 emulation mode for

Legacy systems


5506 297319 8 channel analog input module, each input individually configured

5OOO Series

Analog Output Module

Module 53O4Analog Output Module

Features:n 4 isolated analog outputsn Selectable voltage and current modesn 5V and 10V selectable voltage modesn Low Powern Class 1, Division 2 for use in

hazardous locations


5304-20* 297248 0-20 mA

5304-10* 297252 0-10 volts

5304-5* 297253 0-5 volts

5304-C* 297254 Custom (specify range of each input)

Expansion & Communication Modules

Module 54O3High Level Digital Input Module

Features:n 8 digital inputsn Reliable optical isolationn Isolated in groups of 4 for ease

of wiringn Very low power requirementsn Universal AC or CD

Module 54O4High Level Digital Input Module

Features:n 16 digital inputsn 16 optically isolated digital

inputsn Isolated in groups of 4 for ease

of wiringn Very low power requirementsn 12 to 240 volts


5403-240 297106 240V discrete input module






5404-240*297154 240V discrete input module

5404-120* 297155 120V discrete input module




Digital Input Modules


I/O

AIN AOUT DIN DOUT

I/O Expansion

Counter Input

RTD Input

Inter-Module Cable

Typical Installation

All expansion modules can be powered by a SCADAPack controller or by a separatepower supply. Typical installations have the expansion modules mounted adjacentto the controller on the DIN rail with inter-module cables.

Module 54O5Digital Input Module

Features:n High density, 32 digital inputsn 12 to 120 voltsn Low Powern Class 1, Division 2 for use in

hazardous locations



5405-24* 297247 12-24V discrete input module

Module 54O7Dry Contact Relay Out Module

Features:n 8 Form A mechanical relaysn Highest output load currentn Zero leakage currentn Individually isolatedn Modifiable for Form B (NC) operationn Relays sealed against corrosion

Module 54O1Configurable Digital I/O Module

Features:n MAX. 8 input/output pointsn Each point can be input or outputn Most cost-effective for low point

countsn Mix of inputs and outputs supportedn Plug-in relays simplify maintenancen High current outputs to 3A

Module 54O2Configurable Digital Inputor Output Module

Features:n 16 configurable

digital inputs oroutputs

n Each point can beAC or DC

n Plug-in relayssimplify maintenance

n High current outputs to 3A

Digital I/O Modules

Digital I/O Modules


5401 297121 8 point input/output module (Relay choices listed onModule 5401 specification sheet)


5402* 297153 16 point input or output module (Relay choices listedon Module 5402 specification sheet)

Module 54O6ADry Contact Relay Out Module

Features:n 16 Form A

mechanical relaysn Highest output load

currentn Zero leakage currentn Individually isolatedn Modifiable for Form B (NC) operationn External power input capability


5406* 297284 16 point Form A relay output module, 6A contacts


5407 297126 8 point Form A relay output module, 6A contacts

Digital Output Modules

Module 541OHigh Speed Counter/Accumulator

Features:n 4 counter inputsn Optically isolatedn 32 bit count rangen Wide input range 3 VDC - 28 VDCn Guaranteed no missed counts

to 10KHzn Count retained during power outagen Self clearing or accumulatingn Accepts quadrature phase inputs


5410 297149 4 channel, 10KHz counter input module (or 2 phaseencoder inputs)


5OOO Series

Module 54O8Triac Digital Output Module

Features:n 8 triac digital outputsn Optical isolationn Snubbers for inductive loadsn MOV transient suppressionn Zero-crossing turn on/off for low EMF

Module 54O9FET Digital Output Module

Features:n 8 isolated DC outputsn Optical isolationn Diode protected for inductive loadsn Power source LED

Module 5411Digital Output Module

Features:n High density, 32 digital outputsn Sinking output designn Low Powern Class 1, Division 2 for use in

hazardous locations


5409 297117 8 point DC output module, 12-24VDC @ 1A


5411* 297246 32 point, 12-24V digital output module, open-draintype


5408 297103 8 point triac output module, 24-240VAC @ 1A

Digital Output Modules Combination I/O Modules

Module 5421Toggle Switch Digital Input Module

Features:n 8 toggle switch digital inputsn Reliable, sealed toggle switchesn Ideal for simulation, testingn Status LEDs show switch position

Module 5521Potentiometer Input Module

Features:n 8 potentiometer inputsn Multi-turn pots aid adjustmentn 12 bit resolutionn Does not require 24V power


5521 297119 8 channel potentiometer analog input module forsimulation/testing

I/O Simulator Modules


5421 297104 8 point, toggle switch DI module for simulation/testing


* Modules not fully supported by the non-programmable SmartWIRE controllermodules (Model 5201 & 5202)

Module 56O6Analog/Digital I/O Module

Features:n High density IO

combination boardn 32 DIsn 16 Relay DOsn 8 Configurable AIsn 2 Optional AOs


5606-24 297328 Combination 24V DI, DO and AI module




5606-24-AO 297334 Combination 24V DI, DO, AI and AO module




Modems

Mod el Part No. Description

5901 297198 Auto dial/auto answer modem module, 56K baudV.32 bis, with built-in transient protection

5901SA 297199 Same as 5901 with a 115VAC AC adapter forconnection to PCs or other RS-232 devices


5902 297120 Bell 202 modem module,1200 baud, FSK, 2/4 wire,with radio PTT key control and RF carrier detect


5902SAF 297195 Same as 5902SA with a full duplex to half duplexconverter - for devices without RTS/CTS support


5904 297205 HART interface module

Module 59O1Dial-Up Modem

Features:n Heavy duty lightning suppression

prevents damagen Automatic recovery from failure-to

answern Power-down mode conserves power

when battery-operatedn -40ºC/F to 70ºC/158ºF operating temperature rangen v.32bis, 300 - 14,400 baud

Module 59O2Bell 2O2 Radio or Leased Line Modem

Features:n Universal radio or telephone interfacen Soft carrier turnoff for rapid

turn-aroundn Excellent performance on poor linesn Optional stand-alone versions

for PCsn Useful as isolated HART® interface

Module 59O4HART Interface Module

Features:n Compliant with HART physical layers

specificationsn Configurable as primary or secondary

mastern Unloads HART protocol details from

application softwaren Enables up to 4 HART ports per CPU without using

CPU serial ports

Module 59O8/59O8-WO2Wireless Data Transceiver

Features (5908)n Incorporates Freewave Radio

Technologyn Available in 900 MHz and 2.4*

GHz versionsn High Speed (115.2 kbps true

data throughput)

Features (5908-WO2)n Incorporates MDS TransNET

Radio Technologyn Available in 900 MHzn High Speed (115.2 kbps true

data throughput)

* Not applicable in all areas - consult Control Microsystems for availabilityModel Part No. Description

5908 297270 Radio Transceiver, Freewave 900MHz SpreadSpectrum Radio, 6-30VDC

5908-2.4G 297283 Radio Transceiver, Freewave 2.4GHz SpreadSpectrum Radio, 6-30VDC

5908-WO2 297310 Radio Transceiver, MDS 900 Spread Spectrum Radio,9-30VDC

5OOO Series

Interface Modules & Gateways

Module 591OEthernet Switch

Features:n 5-port, 10/100BaseT Ethernet switchn Auto MDI/MDI-X crossover operationn Powered by SCADAPack 5V source.n Class 1, Division 2, Hazardous Area

Rating


5910 297288 Ethernet Switch, 5 port (unmanaged), 10/100Mbautodetect, 12-24 Vdc powered


Module 5913Serial to Bluetooth Adapter

Features:n Acts as Bluetooth slaven Connects to SCADAPack RJ-45 serial port connector,

(cable included)n Wireless communications module certified to Bluetooth®

version 2.0n Bluetooth Class 1: +100 meter (330 feet) distance when

communicating with another Class 1 devicen Encryption and 16-character alphanumeric Personal

Identification Number (PIN) and error correction schemesfor guaranteed packet delivery


5913 297373 Serial to Bluetooth Adapter w/ 24” RJ45-to-RJ45 cable

Module 5914USB to Bluetooth Transceiver

Features:n Acts as Bluetooth mastern Connects to USB port on desktop or laptop computern Wireless communications module certified to Bluetooth®

version 2.0n Bluetooth Class 1: +100 meter (330 feet) distance when

communicating with another Class 1 devicen Encryption and 16-character alphanumeric Personal

Identification Number (PIN) and error correction schemesfor guaranteed packet delivery


5914 297374 USB to Bluetooth Transceiver

Interface Modules & Gateways


UPS Power Supply


5103 297102 External UPS with 5V@2A, [email protected] isolatedoutputs, 16-24VAC or 12-40 VDC

Module 51O3Uninterruptible Power Supply

Features:n Transformer isolatedn Built-in battery charger for UPSn Isolated 24 volt analog loop outputn Dual, wide range AC/DC inputsn Cool running switch-mode design

Module 52O1RS-485 Communication Controller

Features:n Simple configuration –

no programmingn Powerful industry-standard protocoln Support 64 AI, 64 DI, 64 DO, 32 AOn Watchdog timern Power saving LED control

Module 52O2RS-232 Communication Controller

Features:n Simple configuration –

no programmingn Powerful industry-standard protocoln Support 64 AI, 64 DI, 64 DO, 32 AOn Watchdog timern Power saving LED control


5201 297101 CPU, 1 RS-485 port, 2/4 wire, supports up to to 64 D/I,64 D/O, 64 A/I and 32 A/O, non-programmable


5202 297111 CPU, 1 RS-232 port, DB9P, supports up to to 64 D/I,64 D/O, 64 A/I and 32 A/O, non-programmable

Non-Programmable Controller Modules

CONTROLMICROSYSTEMS w w w . c o n t r o l m i c r o s y s t e m s . c o mWithin Nor th America: (888) 267 2232 n Outside Nor th America: (613) 591-1943 n Ottawa n Calgary n Denver n Houston n Melbourne n LeidenControl Microsystems reserves the right to change product specifications without notice. Printed in Canada n V044 n M01011-15

5OOO Series Expansion & Communication Modules

I/O

I/O Expansion

I/O Expansion

I/O

I/O

5103 5201

RS-485

TCP/IP

Ethernet Switch

Control Room SC ADA Station

I/O

Store & Forward Station

Main PlantSCADAPack Installation

Remote installationsusing Wireless SCADAPacks

In-plant network usingnon-programmable controllers

Sample installation of Communications & I/O Modules

microsystems product selection guide 5ooo series...microsystems product selection guide flexible...

Documents