lubri-lab sa-enduroweartech presentation profile_ 2015 (1)
TRANSCRIPT
LUBRI-LAB SOUTH AFRICA
(PTY) LTD
Corner John Vorster Drive and Marco Polo Street Highveld Centurion 0157
PO Box
68925
Highveld
Centurion
0169
Tel: +27 (0)12 665 5336
Fax: 086 548 3078
Reg Nr:2009/020872/07
Directors:
FS Arendse (CEO)
NM Thekiso (Director)
PO Box 68925, Highveld
Centurion, 0169 Tel: +27 (0)12 665 5336
Fax: 086 511 0383
Website: www.sscgroup.co.za
IF IT NEEDS TO LAST LONGER THAN STEEL
We are a solutions company which identifies severe wear within a production process. Our objective is to
significantly reduce operating costs and down time in that section by improving the products used to prevent
wear. We use products almost as hard as a diamond and are adaptable to your process with the focus on
protecting the critical wear areas. We have more than 30 years’ experience in severe wear solutions. More
products have become part of our portfolio as we have increased influence in our numerous customer’s
businesses. We would like to give you a few examples:
1) Clients in the cement and mixing arena have received positive results on their mixing paddles lasting
14-16 months longer than the standard mixing paddles. An extra benefit is the mixing paddles kept
their shape during this time that meant the production and quality of the mix never reduced before
replacement.
2) Clients in the silicone carbide and clay brick arena had a low wear life on their mills, our specialized
coatings increased the wear life of these mills by 6 times longer than standard VRN400
3) Clients that procure hydro cyclones significantly saves on their spigots and vortex finders, by keeping
the final sizes constant for longer making the sizing and production more reliable.
4) Clients in the diamond and earth moving industries find great outcomes on our protected half arrows
cutting edges lasting up to 5 times longer.
5) Clients in the drilling industries make use our products on their stabilizers and reamers with significant
results lasting up to 3 times longer than tungsten studs or diamond inserts.
6) We are a distributer of ceramic tiles, chromium carbide liners, polyurethane linings, low friction hi
density polymer liners, as a direct result of our successes in the wear solutions industry.
For more industry and product related information please visit: www.enduroweartech.co.za
2
Foundation Drill Tips Cycloduro Spigot
Grouser Bars Reversible Cutting Edges
Hi- Pressure Bends Bucket Chrome Carbide Lining
3
Mixer Wear Parts Material Handling Fan
Carbon Mixing Blades Custom Wear Liners
Aluminum Screw Conveyor Straight Grader Blades
4
Distrubutor Wear Coated Braker Block Coated
Silica Mixing Blade Ash Crusher Hammers
Front end loader bucket Extruder parts
5
Various Application Diagrams