introducing opi-integris - advanced grain management...
TRANSCRIPT
AAARONARON HHACKERACKER Sales Manager &
Precision Ag Specialist
Warren Location
535 S. Grover Street
Warren, IN 46792
260-375-2500
888-375-5250 [email protected]
CCALEALE EECKERTCKERT Precision Ag Specialist
Peru Location
1201 N. Flyer St.
Peru, IN 46970
765-475-6662 [email protected]
LLEEEE SSMITHMITH Precision Ag Technician
260-375-2500
888-375-5250 [email protected]
JJEFFEFF DDOUGLASOUGLAS Customer Service
260-375-2500
888-375-5250 [email protected]
MM IKEIKE DDAUGHERTYAUGHERTY Ag-Serv
Service Manager
260-375-2500
888-375-5250 [email protected]
Inside this issue:
OPI Integris 1
FlexSeeder 2
Precision Planting 3
Capstan 4
Vanguard VM-4000 Series 5
Used Equipment 6
Upcoming Events 6
Introducing OPI-Integris - Advanced Grain Management Sytems
For more than 25 years OPIsystems Inc. has provided
leading-edge grain temperature monitoring and grain
moisture monitoring solutions to the worldwide market-
place. In 2008 OPIsystems launched Integris USA to
focus on sales, marketing and support in the U.S.
market. Today, OPI has empowered grain managers in
40 countries worldwide with a smarter approach to managing and marketing their most valuable
asset.
Optimize your grain's quality by proactively managing your grain! Whether you have 20,000
bushels of storage or 1 million, OPI has the Advanced Grain Storage Management solution to
meet your unique needs. Each of our systems give you the peace-of-mind that comes from
knowing what's going on inside the bin…
Whichever level you choose, rest assured that the system is designed to be fully upgradeable and
expandable to meet your current and future needs.
Much more than selling “products,” OPI-integris can work with you to utilize our Advanced Grain
Management solutions to greatly improve your bottom line.
StorMax Handheld Monitoring: Entry-level system ideally suited for applications
up to 100,000 bushels or where multiple
storages are spread over a broad area
IntegrisBasic
PC-based Monitoring and Alarms: Designed for larger scale storages, where
there is a requirement for monitoring only,
but not automated control
IntegrisPro PC-based Montioring, Alarms and
Control:
Works on the same platform as
IntegrisBasic, but includes the
capability to automatically control
aeration, ventilation and related
equipment to optimize storage
conditions such as grain quality,
temperature and
moisture content.
ELLIOTT’S FLEXSEEDER IS THE MOST INNOVATIVE AND ACCURATE SOLUTION FOR PRECISION FARMING
Page 2
Features/Benefits
Eliminates overplanting in headlands and point rows
Delivers increased yields
Provides substantial seed savings
Compatible with multiple planter makes/models
No lubrication required
No chain disengagement in no-till
No chain/sprocket alignment issues
No spring or winter maintenance required
Easy installation
Completely sealed system is pressure washer
friendly
In-line electric clutch provides individual on/off row
control with minimal power requirements
Industry standard wire connectors are compatible
with a variety of control/monitoring systems
Optional in-line insecticide drive capabilities with
manual disconnect
The FlexSeeder™ is a rugged and reliable high-performance drive system designed for precision
seed placement. Capable of fitting on a variety of seeder platforms, the Elliott FlexSeeder
allows OEM’s, aftermarket professionals, and farmers the ability to upgrade their planning systems
with state-of-the-art drive technology at a fraction of the cost of new equipment. The Elliott
FlexSeeder eliminates chain and sprocket drives, with an individual on/off row control option for
precision farming, maintenance-free operations – giving you substantial seed savings and higher
harvest yields.
“Elite Ag Solutions is a Sales and Technical Support provider of Precision Planting
products in association with Ag Info Tech, a Premier Precision Planting dealer.”
Page 3
CAPSTAN N-JECT LF - THE ANSWER TO LIQUID FERTILIZER APPLICATION
Page 4
The N-Ject®
LF system transforms your toolbar from ordinary to
extraordinary by eliminating the need to change orifices for different
liquid fertilizer application rates or speeds. Instead, the N-Ject LF
system changes the orifice size automatically as it quickly responds to
changes in rate or speed, providing accurate row-to-row uniformity
through a wide range of application rates.
N-Ject LF uses Pulse Width Modulation (PWM) to create an
automatic variable orifice for all your liquid fertilizer application needs.
The operation could not be simpler with this clever design. When the
rate controller increases or decreases the flow, N-Ject LF automatically changes the PWM cycle to adjust flow in-
stantaneously with a 25:1 rate range.
N-Ject LF operates with all flow based controllers. So if you are already using an Ag Leader, Trimble, Raven, Green-
star, or TopCon controller, no need to worry. The N-Ject LF will seamlessly integrate directly with your controller., to
create the most user-friendly operating experience possible.
CAPSTAN N-JECT NH3 - THE MOST ADVANCED, ACCURATE, AND AFFORDABLE NH3 APPLICATION SYSTEM AVAILABLE.
Designed specifically for anhydrous ammonia, Capstan Ag’s N-Ject® system
provides accurate row-to-row uniformity through a wide range of application
rates, while allowing for variable-rate applications. Like the N-Ject LF system,
the N-Ject system eliminates the need to change orifices for different fertilizer
application rates or speeds, the system changes the orifice size automatically
as it quickly responds to changes in rate or speed.
HOW N-JECT® WORKS
Warm NH3 liquid and vapor enter
from the tank, pass through the
screen, and enter the inlet chamber
Gravity helps to separate vapor from
liquid.
NH3 passes between cooling tubes
to condense vapor into liquid
Super cooled NH3 liquid enters the
rail passage ready for metering.
The solenoid valve pulses open to
allow the correct amount of NH3 into
the outlet passage.
NHE liquid vaporizes in the
outlet passage, causing
the cooling tubes to get
very cold.
NH3 leaves the outlet tube
and is routed to the knife for
application to field.
Page 5
The New Standard in Seed and Liquid Flow Monitoring….
with Visu-Flo Technology from
With over 40 years of seed monitoring experience, The Vanguard System now provides more information and
more capabilities in a non-population monitor.
Bar graphs show both high and low flows for each row. At a single glance, the operator can see total
performance of his system. Switch to the new line graph, and a single row becomes the focus with a 20 second
history to detect skips and doubles. Min-Max-Average mode lets the operator know exactly how his planter is
performing.
The Vanguard VM-4000 series monitors are totally new from start to finish. They feature new
concepts designed by engineers who know farming. The economical VM-4100 is a 16 row monitor that is plug and
play for seed monitoring only up to 16 rows. Even the monitor harness is designed to connect to any common planter
or drill harness, either a standard pin configuration or a John Deere pin out. That’s a feature found on only the VM-
4100/4200 to make it the simplest and easiest monitor to instal l and use.
The VM-4200 and VM-4400 include many additional features for the operator who wants to know more about
the performance of his planter or drill. It’s easy to set-up and easy to operate. This sheet details the many features
found on the VM-4200/ VM-4400 that you expect from The Vanguard System.
New for 2015 is Visu-Flo Technology. Monitor liquid flow directly from the screen. Monitor liquid flow with
optional flow meters as a companion to seed monitoring, or use exclusively for liquid. Options include monitoring up
to two rates simultaneously.
7” Color Touch Screen
VM-4200 1-16 Row Monitoring
VM-4400 1-36 Row Monitoring
Bar graphs
Auto Detect Rows
Adjustable accumulating time
RAM 1 ¼” Ball Mount
Adjustable Back light
Day/Night Mode
Adjustable Audible Alarm
Optional Visual Alarm Light
View Min-Max-Avg
View Seeds/Sec/GPM
View 20 sec. Row History
Visu-Flo Option
Optional Lift Switch
Two Hopper Level Options
VM-4200
1-16 Rows
VM-4400
1-36 Rows
Visit us online at
www.eliteagsolutions.com
Division of The Daugherty Co. PO Box 306
Warren, IN 46792
Be sure to check out our website - www.eliteagsolutions.com, “like” us on Facebook - Elite Ag Solutions and follow Elite Ag on Twitter @EliteAgGuy for the latest updates on equipment and promotions.
Pre-Owned Inventory List
CFX750 RTK Glonass $8000
432 Receiver $6750
Kinze Air Clutch Kit $4125
Dual Rawson Drive $4700
CR9040 YM Kit $2250
GAC2100 Moisture Tester $2100
Yield Monitor Deere 9X70 $1500
CFX750 (2) $2600
FIQ Switch Box $525
CFX750 w/ OmniSTAR Unlock $3400
Ag Leader Direct Command $1800
Ag leader Seed Command $1500
GAC500XT Moisture Tester $1200
70 Series Combine Kit $1500
More pre-owned inventory in stock!
Call or stop in today! *Inventory subject to change at any time,
call for an up-to-date list.*
NATIONAL FARM MACHINERY SHOW
LOUISVILLE, KY
FEBURARY 11-14
VISIT US AT BOOTH #116 & 117
CUSTOMER APPRECIATION DAY
WEDNESDAY, FEBURARY 25TH
9:00 AM - 3:00 PM
DETAILS FORTHCOMING...