insect pheromone & kairomone systems meso- meso · meso-a hanger b. meso-a applicator tip with...
TRANSCRIPT
INSECT PHEROMONE & KAIROMONE SYSTEMS
Your Edge – And Ours – Is Knowledge.
MESO-™
™
MESO-™
™
MESO-™
™
POLE APPLICATOR ASSEMBLY AND DISPENSER USE INSTRUCTIONS:
MATERIALS NEEDED:A. CIDETRAK® CMDA COMBO
MESO-A Hanger
B. MESO-A Applicator Tip with hanger stabilizer insert
C. CIDETRAK® CMDA COMBO MESO-A dispenser
1. Open box at top. Fold side flaps outward and attach strap.
2. CONTENTS: 2 sets of MESO-A hangers loaded on to cardboard strip, 1 applicator tip, strap and 2 packs of MESO-A dispensers.
3. Remove one set of MESO-A hangers. Push tab down at end of cardboard strip and put hangers on side of box.
4. Remove the cardboard strip and the rubber band.
5. MESO-A hangers on side of box.
Applicator tip with hanger stabilizer insert
B
CARRIER PACK ASSEMBLY INSTRUCTIONS:
1. Insert MESO hanger into applicator tip. A quick back and forth motion will help stabilize the MESO hanger into the “NEW” applicator tip insert.
4-5. Using PVC pipe attach dispenser securely to lateral branches as shown.
APPLICATION:
Attach dispenser securely to lateral branches at 10-20% of the distance between the trunk and branch terminal in the upper 1/5th of the tree canopy.
6-8. Once attached to branch, hanger will automatically reposition.
1
1 2
5
6 7 8
3. Attach MESO-A dispenser to the hanger.
3 4
4
DISPENSER USE INSTRUCTIONS:
Push tab down
© 2018, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-1218 • 3/18
53
CIDETRAK® CMDA COMBO MESO-A hanger
ASSEMBLY INSTRUCTIONS:1. Attach MESO
APPLICATOR TIP TO ¾” PVC pipe
1A
2. MESO hanger must be touching the bottom of the applicator tip. As shown.
2
Sideview
Endview
CIDETRAK® CMDA COMBO MESO-A
dispenser
C